INTERNAL PIPE BLAST TOOL PBT-2 ROTOBLAST
- For pipes 12" (304, 8 mm) to 36" (914, 4 mm) ID
- Variable feed and optimal rotation speed offers flexibility in cleaning rates for varying surface conditions
- Adjustable centering carriage for consistent blast pattern
- Use with standard blast machine

The PBT-2 ROTOBLAST is an accessory for all Contracor blast machines that allows easy cleaning of the internal surface of steel pipes.
It is durable, portable, and most of all, easy to use. It guaranteed considerable increases in productivity.
The PBT-2 ROTOBLAST consists of an adjustable centre carriage and a constant speed rotating blast head to produce a uniform cleaned blast surface.
The carriage is infinitely adjustable from 12" (304, 8mm) to 36" (914, 4mm) inside diameter.
The rotating head is driven by compressed air and two radially positioned blast nozzles.
The adjustment of the feed allows a high operational flexibility with all degrees of corrosion of the inner surfaces.
The PBT-2 ROTOBLAST unit can be operated with nozzle sizes from 6.5mm to 9.5mm inner diameter.

Standard delivery
Three leg sets, 2 x NTC(F)-6.5 nozzles, 10 x spare leather washers

INTERNAL PIPE BLAST TOOL PBT-1
- For pipes 3" (75mm) - 12" (300mm) ID
- Adjustable centering carriage for consistent blast pattern
- Use with standard blast machine

The PBT-1 pipe cleaning tool is an ideal companion to clean blast pipes from 2" (50mm) to 12" (300mm) inner diameter.
The PBT-1 consists of a tungsten-carbide nozzle in a venturi form with a tungsten-carbide circular deflection tip, which blasts abrasive media in a continuous circle pattern. The tungsten carbide materials ensure low wear and a long service life. Centering collars and carriage allow fitting the PBT-1 to any pipe with an inner diameter between 3" (75mm) and 12" (300mm). With the centering collars PBT-1 can be used in the 3" (75mm) to 5" (125mm) I.D. pipe range. With centering carriage PBT-1 is adjustable to handle all diameters between 5" (125mm) and 12" (300mm) I.D.

Standard delivery
Centering collars sets, centering carriage, wrenches set.

Orbiter Pipe Painting Tool

Efficiently handles wide range of coatings
Applies uniform layer at remarkable speed
No need to rotate the pipe or tubing
Unique gun assembly ensures precise control
Air-controlled centering carriage legs easily adjust for gradual pipe bends

Simple Solution for Industrial Coating Challenges
The Clemco Orbiter provides an innovative and efficient solution to the difficult job of applying paint to the inside of pipe,
conduit, tubing or other cylindrical structures.
With the Orbiter, you can apply a uniform layer of paint at remarkable speed.

Two standard models cover pipe diameters from 3.5 inches through 37 inches.
Orbiter I is for pipes 3.5 to 7 inches ID. Orbiter III is for pipes 7 inches through 37 inches ID.
Each system includes a paint spray tool with centering legs, an air control assembly, a paint spray gun, and air-control and high-pressure paint hoses.
Not included but required for operation of the Clemco Orbiter is an airless paint spray pump.
Any standard 30:1 pump is the minimum requirement, while a 45:1 pump may be preferred as dictated by the coating.

The heart of the Orbiter system is the air-control assembly.
From this central location, the operator controls start/stop of the rotating-head air motor,
the on/off of paint flow, and the air valve and pressure regulator, which control the expansion and contraction of the centering carriage legs.

Easy Set Up and Operation
Used with any standard airless paint spray pump with a minimum pump pressure ratio of 30:1;
the Orbiter set up is quick and easy (the pump size will depend upon paint viscosity, hose length, and tip size).
The Orbiter is powered by compressed air, which operates the rotating head and the carriage legs.
Orbiter I and Orbiter III require approximately 15 cfm and 22 cfm respectively, both at 90 psi.

Various sizes of long-lasting tungsten carbide spray tips are available to suit the specified coating.
Paint flows through the spray tip and paint tubing for metering at the head, the working end of the Orbiter.
To operate the Orbiter, one operator handles the air-control assembly and paint gun;
another manually pulls the tool from one end of the pipe to the other at a speed established by experience
and the type of coating being applied and the thickness required.

A Simple, Fast, and Cost-Effective Job
The Orbiter tools offer an effective and precise method of coating pipe.
The investment will reward you with the highest rate of speed and most accurately-applied coating, saving you time and money.

The Orbiter I and III tools are each available in four packages to suit jobs with differing lengths of pipe. Choose from models with 6 feet, 12 feet, 20 feet, or 40 feet of hose.
Six sizes of spray tip are available, ranging from .018 to .043 to suit the specified coating.

Spin-Blast HD

Internal Pipe Cleaning Tool

Rugged, Heavy-duty, and Low Maintenance
For pipes 18" to 48" ID
Air motor control offers exibility in cleaning rates for varying surface conditions
Adjustable centering carriage for consistent blast pattern
Use with standard blast machine

Pipe cleaning just got easier with the Spin-Blast HD from Clemco.
The Spin-Blast HD is a rugged, portable, high-production tool for blast cleaning the internal surface of steel pipe.
Its carriage adjusts for cleaning pipe from 18 inches to 48 inches inside diameter.

The Spin-Blast HD is a pneumatic tool that is used as an accessory to astandard blast machine.
Compressed air powers an air motor for control of the blast head rotation speed allowing infinite flexibility for varying degrees of contamination of the steel surface. The tool can be used with nozzles from 3/8" ID to 1/2" ID and requires a minimum of 1-1/2 ID blast hose.
[Larger nozzles can be used in special situationsconsult distributor].

Advantages:
Sturdy, rugged tool that withstands the harsh blast environment
Few moving parts to replace
Independent air motor control of blast head suits varying surface conditions

Internal Pipe Cleaning Tool: Hollo-Blast

The Clemco Hollo-Blast cleans the full 360 degree inside diameter of pipe to white metal finish. It operates without need of rotating the pipe or the tool. deposits such as rust, carbon millscale, coke and paint are easily removed. The Hollo-Blast will accommodate pipes from 2 inch to 12 inch I.D. and lengths up to 40 feet. Any abrasive (except aluminum oxide or silicon carbide) 20 mesh or finer may be used. In operation, the proper model is attached to a pipe lance and connected to Clemco blast hose. The Hollo-Blast is inserted into the pipe, the Clemco blast machine is started and the Hollo-Blast is manually pushed through the pipe. Abrasive hits the tungsten carbide deflector tip and fans out to clean the 360 degree interior. Air will blow spent abrasive and contaminants out of the pipe. The rate of cleaning depends on deposits being removed. Hollo-Blast is available with 1/2 inch or 5/8 inch nozzles. Standard HB-1 delivered with 1/2 inch nozzle. Air consumption, 1/2 inch 200 CFM, 5/8 inch 350 CFM.

Model HB-1
Hollo-Blast with 1/2 inch nozzle and tungsten carbide tip

Model HB-2
Hollo-Blast with 5/8 inch nozzle and tungsten carbide tip

Model HBB
Hollo-Blast with 1/2 inch nozzle and boron carbide tip

Model HBC-1
Centering Collars mount on Hollo-Blast to accommodate pipes from 3 inch to 5 inch I.D. in 1/2 inch increments

Model HBC-2
Centering Carriages is adjustable between 5 inch and 12 inch I.D. The lightweight aluminum carriage is quickly adjusted by knurled locknuct

INTERNAL PIPE BLAST TOOL PBT-2 ROTOBLAST
- For pipes 12" (304, 8 mm) to 36" (914, 4 mm) ID
- Variable feed and optimal rotation speed offers flexibility in cleaning rates for varying surface conditions
- Adjustable centering carriage for consistent blast pattern
- Use with standard blast machine

The PBT-2 ROTOBLAST is an accessory for all Contracor blast machines that allows easy cleaning of the internal surface of steel pipes.
It is durable, portable, and most of all, easy to use. It guaranteed considerable increases in productivity.
The PBT-2 ROTOBLAST consists of an adjustable centre carriage and a constant speed rotating blast head to produce a uniform cleaned blast surface.
The carriage is infinitely adjustable from 12" (304, 8mm) to 36" (914, 4mm) inside diameter.
The rotating head is driven by compressed air and two radially positioned blast nozzles.
The adjustment of the feed allows a high operational flexibility with all degrees of corrosion of the inner surfaces.
The PBT-2 ROTOBLAST unit can be operated with nozzle sizes from 6.5mm to 9.5mm inner diameter.

Standard delivery
Three leg sets, 2 x NTC(F)-6.5 nozzles, 10 x spare leather washers

INTERNAL PIPE BLAST TOOL PBT-1
- For pipes 3" (75mm) - 12" (300mm) ID
- Adjustable centering carriage for consistent blast pattern
- Use with standard blast machine

The PBT-1 pipe cleaning tool is an ideal companion to clean blast pipes from 2" (50mm) to 12" (300mm) inner diameter.
The PBT-1 consists of a tungsten-carbide nozzle in a venturi form with a tungsten-carbide circular deflection tip, which blasts abrasive media in a continuous circle pattern. The tungsten carbide materials ensure low wear and a long service life. Centering collars and carriage allow fitting the PBT-1 to any pipe with an inner diameter between 3" (75mm) and 12" (300mm). With the centering collars PBT-1 can be used in the 3" (75mm) to 5" (125mm) I.D. pipe range. With centering carriage PBT-1 is adjustable to handle all diameters between 5" (125mm) and 12" (300mm) I.D.

Standard delivery
Centering collars sets, centering carriage, wrenches set.

Orbiter Pipe Painting Tool

Efficiently handles wide range of coatings
Applies uniform layer at remarkable speed
No need to rotate the pipe or tubing
Unique gun assembly ensures precise control
Air-controlled centering carriage legs easily adjust for gradual pipe bends

Simple Solution for Industrial Coating Challenges
The Clemco Orbiter provides an innovative and efficient solution to the difficult job of applying paint to the inside of pipe,
conduit, tubing or other cylindrical structures.
With the Orbiter, you can apply a uniform layer of paint at remarkable speed.

Two standard models cover pipe diameters from 3.5 inches through 37 inches.
Orbiter I is for pipes 3.5 to 7 inches ID. Orbiter III is for pipes 7 inches through 37 inches ID.
Each system includes a paint spray tool with centering legs, an air control assembly, a paint spray gun, and air-control and high-pressure paint hoses.
Not included but required for operation of the Clemco Orbiter is an airless paint spray pump.
Any standard 30:1 pump is the minimum requirement, while a 45:1 pump may be preferred as dictated by the coating.

The heart of the Orbiter system is the air-control assembly.
From this central location, the operator controls start/stop of the rotating-head air motor,
the on/off of paint flow, and the air valve and pressure regulator, which control the expansion and contraction of the centering carriage legs.

Easy Set Up and Operation
Used with any standard airless paint spray pump with a minimum pump pressure ratio of 30:1;
the Orbiter set up is quick and easy (the pump size will depend upon paint viscosity, hose length, and tip size).
The Orbiter is powered by compressed air, which operates the rotating head and the carriage legs.
Orbiter I and Orbiter III require approximately 15 cfm and 22 cfm respectively, both at 90 psi.

Various sizes of long-lasting tungsten carbide spray tips are available to suit the specified coating.
Paint flows through the spray tip and paint tubing for metering at the head, the working end of the Orbiter.
To operate the Orbiter, one operator handles the air-control assembly and paint gun;
another manually pulls the tool from one end of the pipe to the other at a speed established by experience
and the type of coating being applied and the thickness required.

A Simple, Fast, and Cost-Effective Job
The Orbiter tools offer an effective and precise method of coating pipe.
The investment will reward you with the highest rate of speed and most accurately-applied coating, saving you time and money.

The Orbiter I and III tools are each available in four packages to suit jobs with differing lengths of pipe. Choose from models with 6 feet, 12 feet, 20 feet, or 40 feet of hose.
Six sizes of spray tip are available, ranging from .018 to .043 to suit the specified coating.

Spin-Blast HD

Internal Pipe Cleaning Tool

Rugged, Heavy-duty, and Low Maintenance
For pipes 18" to 48" ID
Air motor control offers exibility in cleaning rates for varying surface conditions
Adjustable centering carriage for consistent blast pattern
Use with standard blast machine

Pipe cleaning just got easier with the Spin-Blast HD from Clemco.
The Spin-Blast HD is a rugged, portable, high-production tool for blast cleaning the internal surface of steel pipe.
Its carriage adjusts for cleaning pipe from 18 inches to 48 inches inside diameter.

The Spin-Blast HD is a pneumatic tool that is used as an accessory to astandard blast machine.
Compressed air powers an air motor for control of the blast head rotation speed allowing infinite flexibility for varying degrees of contamination of the steel surface. The tool can be used with nozzles from 3/8" ID to 1/2" ID and requires a minimum of 1-1/2 ID blast hose.
[Larger nozzles can be used in special situationsconsult distributor].

Advantages:
Sturdy, rugged tool that withstands the harsh blast environment
Few moving parts to replace
Independent air motor control of blast head suits varying surface conditions

Internal Pipe Cleaning Tool: Hollo-Blast

The Clemco Hollo-Blast cleans the full 360 degree inside diameter of pipe to white metal finish. It operates without need of rotating the pipe or the tool. deposits such as rust, carbon millscale, coke and paint are easily removed. The Hollo-Blast will accommodate pipes from 2 inch to 12 inch I.D. and lengths up to 40 feet. Any abrasive (except aluminum oxide or silicon carbide) 20 mesh or finer may be used. In operation, the proper model is attached to a pipe lance and connected to Clemco blast hose. The Hollo-Blast is inserted into the pipe, the Clemco blast machine is started and the Hollo-Blast is manually pushed through the pipe. Abrasive hits the tungsten carbide deflector tip and fans out to clean the 360 degree interior. Air will blow spent abrasive and contaminants out of the pipe. The rate of cleaning depends on deposits being removed. Hollo-Blast is available with 1/2 inch or 5/8 inch nozzles. Standard HB-1 delivered with 1/2 inch nozzle. Air consumption, 1/2 inch 200 CFM, 5/8 inch 350 CFM.

Model HB-1
Hollo-Blast with 1/2 inch nozzle and tungsten carbide tip

Model HB-2
Hollo-Blast with 5/8 inch nozzle and tungsten carbide tip

Model HBB
Hollo-Blast with 1/2 inch nozzle and boron carbide tip

Model HBC-1
Centering Collars mount on Hollo-Blast to accommodate pipes from 3 inch to 5 inch I.D. in 1/2 inch increments

Model HBC-2
Centering Carriages is adjustable between 5 inch and 12 inch I.D. The lightweight aluminum carriage is quickly adjusted by knurled locknuct