Mujtaba Marine Pvt Ltd

Chembur, Mumbai, Maharashtra

Nozzles type GTC
Wear-resistant Venturi type hose insert nozzles made of tungsten carbide (TC).
Special designed for using with blast hose ID=25 mm. Service life: up to 400 h. Jacket: Aluminum.

Nozzles type HTC
Wear-resistant Venturi type hose insert nozzles made of tungsten carbide (TC).
Special designed for using with blast hose ID=32 mm. Service life: up to 400 h. Jacket: Aluminum.

Nozzles type RTC
Wear-resistant Venturi blasting nozzles made of tungsten carbide (TC). Service life: up 400 h.
Cover: Rubber. Thread: Rubber, 50 mm for NHP nozzle holder. Entry size: 32 mm.

Nozzles type CTC
Wear-resistant Venturi blasting nozzles made of tungsten carbide (TC). Service life: up 400 h.
Cover: Aluminum / rubber. Thread: Aluminum, 50 mm for NHP nozzle holder. Entry size: 32 mm.

Nozzles type DVTC
Wear-resistant Double Venturi blasting nozzles made of tungsten carbide (TC). Service life: up 400 h.
Cover: Aluminum / rubber. Thread: Aluminum, 50 mm for NHP nozzle holder. Entry size: 32 mm.

INTERNAL PIPE BLAST NOZZLES 360
Internal pipe blasting nozzles type PTC-360 are designed to blast clean the interior of pipes ranging in size from 2" to 5" I.D. (50mm bis 125mm).
The nozzle connected an abrasive blast machine in place of a standard nozzle.
In operation, the PTC-360 nozzle directs the air/abrasive mixture at a deflection tip.
This tip causes the blast pattern to fan out into a wide, circular pattern, which cleans the inside of the pipe as the nozzle is passed through.
Made from tungsten carbide (TC). Fits all Contracor nozzle holders.

Characteristics
Highly wear-resistant angle type blasting nozzles. Made from tungsten carbide (TC). Lifetime: - Up to 400 h.
Jacket: Aluminum. Thread: Aluminum, 50 mm for NHP nozzle holder.

BLAST NOZZLES PERFORMER 1000

Performer is the latest development of high performance Venturi blast cleaning nozzles.
New modern and highly wear resistant liners are equipped with a rugged and lightweight polyurethane jacket.
Whether blasting with high aggressive Fused Aluminas, Boron Carbides and Steel Grits or blasting with Expendable slag-based abrasives -
in Contracor Performer nozzles range you will find the best suitable nozzle for your application.
Performer nozzles are available in five sizes to achieve maximum productivity of abrasive blast cleaning system.
You can select correct nozzle bore to suit compressed air supply and optimize blast media consumption.

BLAST NOZZLES PERFORMER 1000

Wear-resistant Venturi blasting nozzles made of boron carbide (B4C). Service life: up 1000 h.
Cover: Polyurethane. Thread: Aluminum, 50 mm for NHP nozzle holder. Entry size: 32 mm.

nylon nozzle holders nhp

for abrasive blasting hoses.

equipped with a rubber washer and screws.

WATER BLAST NOZZLES TYPE WBN
Contracor water blast equipment has been specifically designed to meet growing customer demand for a multi-purpose cleaning system that is fast, economical and environment-friendly.

Field of Application
Dust-reducing high-performance cleaning of steel, stone and concrete surfaces. Cleaning up to grade SA-3.0.
Performance up to 20% higher than dry blasting. Designed to work with any water matching abrasives, max. grain size 3.5 mm.

Characteristics
Water blast nozzles for wet blast applications. Made from high grade tungsten carbide.
Jacket: Aluminium. Thread: 50-mm coarse aluminium thread.

ANGLE BLAST NOZZLES BTC
Bending nozzles are used for getting inside tight or hard to reach places like corners, behind flanges or inside
BTC type bending nozzles are compact and shoot out the abrasive at 45 angles. Made from tungsten carbide (TC).
Fits all Contracor nozzle holders.

Characteristics
Highly wear-resistant angle type blasting nozzles. Made from tungsten carbide (TC). Lifetime: up to 400 h.
Jacket: Aluminum / Polyurethane protector. Thread: 50-mm coarse rubber thread.

NHP Nylon Nozzle Holders

The Clemco fiber-reinforced nylon nozzle holder attaches to the end of a blast hose and holds a contractor-thread blast nozzle.

Description of Operation
The blast hose must be cut squarely and cleanly. The nozzle holder is installed with the screws provided.
These screws penetrate the outer wall, but not the inner wall of the blast hose.

In operation, the air pressure inside the blast hose helps hold the nozzle holder securely in place.

A nozzle washer must be placed on the shoulder inside the nozzle holder to prevent premature wear and failure, of both the holder and the nozzle, from high-speed abrasive.
NHP-3/4 fits 3/4-inch ID Supa hose
NHP-1 fits 3/4-inch ID 2-braid hose, (1-1/2-inch OD) and 1-inch ID Supa hose
NHP-2 fits 1-inch ID 2-braid and 4-ply blast hose (1-7/8-inch OD) and 1-1/4-inch ID Supa hose
NHP-3 fits 1-1/4-inch ID 2-braid and 4-ply blast hose (2-5/32-inch OD)

Advantages:
Fiber-reinforced nylon material springs back from most impacts that would dent or deform metal nozzle holders
Lighter weight than metal nozzle holders
Precision dimensions
Large thread makes changing nozzle easy

Nozzles type STC
Wear-resistant short Venturi blasting nozzles made of tungsten carbide (TC). Service life: up 400 h.
Cover: Rubber. Thread: Rubber, 50 mm for NHP nozzle holder.

Nozzles type MTC
Wear-resistant short Venturi blasting nozzles made of tungsten carbide (TC). Service life: up 400 h.
Cover: aluminum. Thread: aluminum, 50 mm for NHP nozzle holder. Entry size: 32 mm.