Mujtaba Marine Pvt Ltd Mumbai, Maharashtra

Tungsten Carbide Lined Angle CAM Series

A CAM angle nozzle is designed to blast blind surfaces such as mold cavities or behind beams.
Tungsten Carbide lined, the nozzles are available in one or three outlets.

Description of Operation
The operator inserts the included nozzle washer into a nozzle holder and screws in the nozzle, turning it by hand, until it seats firmly against the washer.

With all related equipment correctly assembled and tested, the operator points the angle nozzle at the surface to be cleaned and presses the remote control handle to begin blasting.
The operator holds the nozzle 18 to 36 inches from the surface and moves it smoothly at a rate that produces the desired cleanliness.
Each pass should overlap slightly.

The operator must replace the nozzle once the orifice wears 1/16-inch beyond its original size.

Advantages:
Tungsten Carbide is the most rugged and durable liner materal and provides the best value.
Has a 45 degree outlet angle and is available in one or three outlets.
1-inch entry provides smooth transition

Metal-refining industry, waste, by-product
Shiny or dull, dark brown to black, irregular particles
Medium performance abrasive
Tends to be dusty and shatter on impact
Limited use for ultra hi-build coating removal

Manufactured hypereutectoid steel abrasive
Grey, metal spheres
Used in airless wheel blast machines to clean foundry castings, surface polishing and shot peening
Also used in portable trackblast airless wheel blast machines for concrete floor preparation and profiling
Very long lasting
Can be recycled many times

Packed in 25kg bags
Special, stainless steel shot and high hardness specification shots available.

Garnet is a hard, heavy, durable abrasive. It can be recycled up to 5 times without a loss in
performance. Garnet can be used for cleaning steel in various applications including ship building and repair, tanks, offshore platforms, and pipelines.

It is also used to provide surface finish for powder coaters. Garnet has the following advantages & benefits:
Inert, natural mineral
Pinkish to reddish-bron, sub-rounded grains
High performance, low dust abrasive
Ideal for industrial coating work with a selection of grades to suit various applications. e.g. new steel, whipblasting, full blasting, heavy rust removal, feathering, etc.
Economical, single use abrasive
May also be recycled.

Supplied in bulk bags or 25kg bags

Metal-refining industry, waste, by-product
Shiny or dull, dark brown to black, irregular particles
Medium performance abrasive
Tends to be dusty and shatter on impact
Limited use for ultra hi-build coating removal

Coal slag will blast off the toughest coatings so you can prepare surfaces right the first time.
Achieve consistent, high quality performance that you demand in a coal slag abrasive, Coal slag is tough, clean and economical.