Mts Incorporation

Urban Estate Phase 2, Jalandhar, Punjab

• Friction surface material is NBR film.
• Back surface material is NBR film.The belt factor is 2 N/mm at 1% elongation for product code MTS 20F,
• 4 N/mm for MTS 40F, 6.50 N/mm for MTS 80F.

• Friction surface material is NBR film.
• Back surface material is Texture.
• The minimum pulley diameter at 20 deg. C is 15mm for product code MTS S-0and 15mm for MTS S-1.
• The belt factor is 1.25 N/mm at 1% elongation for product code MTS S-0 and2 N/mm for MTS S-1.

TS Tongs are reputed for toughness, dependability and ease of handling. Virtually every piece is manufactured as per API specification. Numerically controlled and automatic machine tools handle almost every step of machining to assure a proper fit between working parts.

MTS Tong is an effective tool for casing and tubing operations, it has been designed for toughness, dependability and ease of handling.

These Tongs are available in a variety of models, sizes and types to handle almost any down hole pipe string, as well as rods.

From 4-1/2" Tubing Tong to 20" Casing Tong

Hydra shift and Hydro shift, tubing and casing tongs, available in variety of models, sizes and types, to handle casings, drill collars, tubing as well as sucker rods.

TONG Diesare available on specific request.

OUR PRODUCTS :-

• RUBBER NYLON SANDWICH BELTS.
• LEATHER NYLON SANDWICH BELTS.
• LEATHER NYLON FABRIC BELTS.
• FABRIC NYLON FABRIC BELTS.
• SYNTHETIC SPINDLE TAPE.
• CONDENSOR TAPE.
• COMBING LEATHER.
• KNITTING MACHINE BELTS.

Nylon Sandwich Belt Product Description:-

• This product comes under the category of Power transmission industry.As the name indicates, Nylon is used as sandwich.
• This product runs on Plain Pulley whereas V-Belts runs on Grooved Pulley which means in any textile/paper industry where V-Belt is used, there is requirement of this product.
• Nylon is used as sandwich in this product as in todays world, nylon has maximum strength, controlled Elongation, more durability as well as life.
• Rubber-Nylon-Rubber category is used in any type of textile industries in various machines under different drives as well as in any kind of Engineering Industries.
• Leather-Nylon-Leather category is used in any type of paper, textile, wooden, marble industries and certain other industries where oil/lubricants spillage exists as leather has all the properties to absorb oil as well as in any kind of Engineering Industries.
• Both the above mentioned categories are having requirements in certain widths like 50/100/150/200/250/300 mm etc. and in open lengths in rolls of 50, 100 metres.
• We can manufacture this product in maximum width of 300 mm and in rolls of 50, 100 metres & above.We manufacture both the above mentioned categories in high quality, most competitive prices and on the top at par with World class manufacturers like Habasit, Nitta etc.

Advantages and Special Features of MTS Flat Belts :-

• Extensively High Tensile Strength.
• No permanent Elongation.
• High Efficiency.
• Steady overall thickness.
• Light weight, reduce bearing loads.
• High co-efficient of friction.
• Wide Range of Power Transmission from 0.5 HP to 200 HP.

MTS supplies Ring Joint Gaskets in all sizes and materials to ASME B 16. 20 & API 6A.

Material - Soft Iron, LCS, F5, SS304, SS316, SS321. in type R- (oval/octa) Rx and Bx. under conformation to API - specification of 6A.

Above items can be applied in Carbon Steel, Low Alloy Steel, Alloy Steel, Super Alloys as 17-4 PH, MONEL, INCONEL etc. meeting any International standards e.g. ASTM, API, BIS, JIS, DIN, AISI, ISO, BS & Is etc.

MTS Incorporation supplies a quality line of high pressure Integral / Fabricated Union connections with Unions in various configurations and sizes from 2" to 4" and in pressure ratings upto 20, 000 PSI CWP. These items are manufactured from high strength alloy steel forgings and fully heat treated under controlled conditions to assure uniform quality throughout. Available in combinations Male by Male, Male by Female to suit virtually any installation.

The type of connections that MTS supplies are -

• Crosses, Elbows, T's & Y's.

• 45 and 60 laterals

• Crows foot

• Goat Head.

• Friction surface material is Chrome leather.
• Back surface material is Black coated Fabric.
• The belt factor is 5 N/mm at 1% elongation for product code MTS 50LT, 7.50 N/mm for MTS 75LT, 10 N/mm for MTS 100LT, 15 N/mm for MTS 200LT, 23 N/mm for MTS 300LT, 30.50 N/mm for MTS 400LT.

Treating Irons -

MTS one piece Treating Iron comprises an integral MTS wing union end connection which eliminates welds and threads. Available in length upto 12 feet. Material is of Carbon Steel and alloy steel and is light weight. This integral treating iron is capable of handling a variety of fluids at cold working pressure of 15000 PSI. MTS treating irons are also available for sour service upto a CWP of 10, 000 PSI & in other lengths if required.

Recommended Service -

These are suitable for High Pressure Discharge Lines, temporary Flow Lines, Auxiliary Flow Lines, Well Testing Lines, Water Lines, Choke and Kill Lines and Abrasive Applications.

Salient Benefits -

Since there are no welds and threads, MTS treating Irons provide an uniform bore of greater flow capacity and improved flow characteristics. MTS design allows for uniform heat treating of the entire joint for better structural qualities. Nut can be detached for easy disassembly if replacement becomes necessary. For this only a circlip has to be removed.

End Connections -

End connections can be provided for customer choices.

All high pressure Test Units have been design and built to provide a safe and efficient means of hydrostatically testing blowout preventers, mud systems, Christmas trees and other items requiring high pressure static testing.

A variety of maximum pressure ranges and configuration styles is available. Test units with pressure ranges of 5000, 10000, 15000, 20000 and 30000 PSI can be provided. Configuration styles include skid mounted, unit mounted, portable with wheels (in 5000 and 6000 PSI models) and self-contained with reservoir and control valve. These units can also be equipped with a chart-type recorder to provide a recorded of the test results.

High pressure test unit, available with working pressure range from 5M - 30M. These units are recommended for high pressure testing of BOP stacks, choke & kill lines, Christmas trees and any type of equipment requiring high pressure static testing.

MTS Incorporation is a leader in developing the Swivel Joints and Cementing & Circulating Hoses and caters for all sizes from 1" to 2", for low pressure of 1000 PSI to high pressure of 20, 000 PSI and meets both standard and sour service conditions of the well. For Sour Service these hoses are available at CWP of 15000 PSI. Standard lengths supplied are 6' and 12'. Swivel Joints can be supplied in various configurations from style 10 to style 80. These hoses are designed to handle complete range of fluids. For pressure ratings beyond 10000 PSI CWP, long sweep hoses are provided. These hoses can also be supplied in half section configuration. End connections can be welded, threaded, NPS or integral to suit customers requirement.