Product / Services
Post Buy Requirement
ME

MTMS ENGINEERS PRIVATE LIMITED (formerly Known As Material Testing Mac
Sanghvi, Pune, Maharashtra

Add Review
Call Now Call Now

Our Product / Services

  1. Testing Equipment 10 Products available
  2. Industrial Machinery 9 Products available
  3. Weighing Scales & Measuring Tapes 3 Products / Services available

  4. Electrical & Electronic Testing Devices

    1 Products available

  5. Testing Equipments

    1 Products available

  6. Calibration Services

    1 Services available

  7. Computer Printers

    1 Products available

  8. Polishing Machines

    1 Products available

  9. Grinding Machine

    1 Products available

  10. Cutting Machines & Equipment

    1 Products available
  11. Others Products / Services 8 Products / Services available

Testing Equipment

We offer the best product range of Micro Hardness Tester, Computerised Micro-Vickers Hardness Tester, computerised vickers hardness tester, Rockwell Hardness Testers and Brinell Hardness Tester.

Micro Hardness Tester

Micro Hardness Tester
Computerised Microvickers Hardness Tester is a simple and accurate means to produce and automatically measure the diamond indentation to give micro hardness numbers directly. These testers are suitable for measuring the hardness of precision metallic parts with wide testing range - from soft to hard, and their accurate results are widely acclaimed. These testers strictly conform to IS:1754:2002 and ISO 6507-2:1997.Construction :The machine frame is designed to accommodate the high precision loading system. Specimen is clamped by vice or supported by proper fixtures. The test cycle is fully automatic. The accurate load is applied on a diamond indentor by means of dead weights. After a lapse of time, the load is removed automatically. The image id digitallized using a CCD Camera fitted on the machine and is captured by the PC. The diagonals of the indentation are measured by the PC and the Micro Hardness number is displayed directly on monitor.
View Complete Details
Ask Latest Price & Details
Computerised Micro-Vickers Hardness Tester

Computerised Micro-Vickers Hardness Tester
  • Test Loads 10, 20, 50, 100, 200, 300, 500 gf
  • Maximum Test Height 30 mm with clamping vice, 50 mm without clamping vice
  • Sample Stage (XY stage) with micrometer heads of 0.01 LC 10mm movement in each axis
  • Clamping vice capacity 40mm max.
  • Scale least count 0.0001 mm
  • Machine dimension L 450 X W 275 X H 535 mm (Aprox)
  • Weight (approx.) 48 kgs
  • Measuring Range 0.01 to 0.2 mm
  • Vickers Diamond Indentor 136 pyramid 1 No.
  • Standard Test Block 1 No.
  • Spanners 1 Set
  • Supply Cord 1 No.
  • PC interface cable 1 No.
  • Video Capture Card 1 No.
  • Microvicksys Software CD 1 No.
  • Instruction Manual 1 No.
Computerised Microvickers Hardness Testeris a simple and accurate means to produce and automatically measure the diamond indentation to give micro hardness numbers directly. These testers are suitable for measuring the hardness of precision metallic parts with wide testing range - from soft to hard, and their accurate results are widely acclaimed. These testers strictly conform to IS:1754:2002 and ISO 6507-2:1997.
Construction :
The machine frame is designed to accommodate the high precision loading system. Specimen is clamped by vice or supported by proper fixtures. The test cycle is fully automatic. The accurate load is applied on a diamond indentor by means of dead weights. After a lapse of time, the load is removed automatically. The image id digitallized using a CCD Camera fitted on the machine and is captured by the PC. The diagonals of the indentation are measured by the PC and the Micro Hardness number is displayed directly on monitor.


Features :
Fully Computerised (PC based) Micro Hardness Tester.
Direct and accurate measurement of micro hardness number using "State of the art" image processing technology.
Wide testing range : From soft metal such as lead up to hardest, like hardened steel.
High accuracy and repeatability of measurement at all loads.
Small size of indentation makes it a non destructive testing on finised components.
Load slection by external knob.
Motorised loading and unloading cycle.
Small loads allow testing of thin sheet metals.
Advanced Window 98 Based Software :
- Latest GUI features with user friendly software.
- On line indentation setting and focusing on PC monitor.
Advanced Image Processing:Algorithms implemented for precise calculations of hardness numbers with various options to coverall ranges of specimens.
Batch File Processing:Option for data/ storage and reports generation for case depth analysis etc.
Statistical Evaluation:Software for calculating standard deviation, mean, medium, frequency distribution graph, variation graph etc.
- Calibration mode facility.
Scope of Supply
Basic machine with CCD Camera, optics with illumination system and connecting cable.
PCI video capture card with driver software.
PC and Windows operating system is procured by customer. Minimum Pentium II with 64mb RAM & Window 98 / 98SE operatingsytem required.
View Complete Details
Ask Latest Price & Details
computerised vickers hardness tester

Computerised Vickers Hardness Tester
Fully Computerised (PC Based) Vickers Hardness Machine.
Direct and accurate measurement of Vickers Hardness number using"State of the Art" image processing technology.
Wide testing range : from soft metal up to hardest.
High accuracy and repeatability of measurement at all loads.
Faster measurement yielding to higher productivity.
Small size of indentation makes it a non destructive testing on finished components.
Motorised loading and unloading cycle.
Small loads allow testing of thin sheet metals.
Advanced Window XP based software :


Latest GUI Features :
User friendly software with Windows Features.
Online indentation setting and focusing on PC monitor.
Advance image processing : Algorithms implemented for precise calculation of hardness numbers with various options to cover allranges of specimen.
Batch file Processing: Option for Data, storage and reports generation.
Statistical Evaluation: Software forcalculating standard deviation, mean, medium, histogram etc.

Wide options in calibration mode.- Calibration / Verification on PC monitor makes easier to operate.

Specifications :
Computerised Hardness Tester is a simple and accurate means to produce automatically measure the diamond indentation to give Vickers hardness numbers.

These testers are suitable for measuring the hardness of precision metallic parts with wide testing range - from soft to hard and their accurate results are widely acclaimed. These testers strictly confirm to IS 1754 - 2002.
Construction :

The robust machine frame is designed to accommodate the high precision loading.

Specimen is placed on a testing table. The test cycle is fully automatic. The accurate load is applied on a diamond indentor by means of a lever and weights. After a specific lapse of a time the load is removed automatically. The image is digitized using a CCD camera fitted on the machine and is captured by PC. The diagonals of the indentation are automatically measured by PC to give the Vickers Hardness Number.
PC requirements :
Intel Pentium IV 2.00 GHz or above processor is recommended.
Microsoft Windows 98SE or above (Recommended XP)
System Ram : 128 MB or above (Recommended 256 MB)

One RS 232 (serial) port. (PC not included in standard scope of supply)
View Complete Details
Ask Latest Price & Details
Rockwell Hardness Testers

Rockwell Hardness Testers
Features :
Rockwell, Rockwell Brinell Combined, Rockwell / Rockwell Superficial Combined System Hardness Testers.

Hardness Testers, Model RAS, RAB-1, RAB-250, TWIN are manually operated. All these models are suitable for testing hardness of metals sand alloys of all kinds hard or soft, whether flat, round, or irregular shape. These testers are simple in design and easy to operate, yet sensitive & accurate. Various models from the wide range are suitable for schools, laboratories, tool-rooms, inspection, heat treatment departments, factories etc.These testers strictly confirms to IS : 1586 - 2000, ASTM : E 18 for Rockwell Superficial Test and IS : 2281 - 2005, ASTM : E 10 for Brinell test.

Model RAS : Model RAB-1 Model TWIN
Automatic load selection with automatic zero 
setting dial gauge. 


Manual operation. 		Automatic load selection & automatic zero setting dial gauge. Facility for Brinell tests with 187.5 kgf. load with 2.5 mm Ball indicator, additional load 
250 kgf. with 5mm Ball indentor for testing 
hardness of non- ferrous metals. 		Automatic load selection with automatic zero setting dial gauge.
Manual operation. 
Diamond holder is guided in a ball cage, which enables testing of small pins having dia. Less 
than 6 mm (up to 3mm dia.)
Model RAB 250    
Similar to 'RAB-1' but of bigger capacity. Diamond holder is guided in a ball cage, which enables testing of small pins having dia less than 6 mm ( up to 3 mm dia.)  









Standard Accessories :
Model RAS /RASM RAB-1 / RAB-250 TWIN
Testing table 50mm dia 1 pc. 1 pc. 1 pc.
Testing Table 38mm dia with 'V groove for round jobs 6 to 45mm dia. 1 pc. 1 pc. 1 pc.
Diamond Indentor 120° 1 pc. 1 pc. 1pc.
Stell ball Indentor 1/16" 1 pc. 1 pc. 1 pc.
Test Block Rockwell 'C 1 pc. 1 pc. 1 pc.
Test Block Rockwell 'B' 1 pc. 1 pc. 1 pc.
Test Block Rockwell Superficial 'N' Nil Nil 1 pc.
Allen Spanners 5 pcs 5 pcs 5 pcs
Clamping Device 1 pc. 1 pc. 1 pc.
Dash Pot Oil 1 Bottle 1 Bottle 1 Bottle
Rubber bellow for elevating screw protection 1 pc. 1 pc. 1pc.
Instruction Manual 1 Book 1 Book 1 Book
Brinell Microscope Nil 1 pc. Nil
Stell Ball Indentor 2.5mm Nil 1 pc. Nil
Test Block HB 2.5/187.5 Nil 1 pc. Nil
Stell Ball Indentor 5mm ' Nil 1 'pc. -. Nil

Technical Data :
Model Unit RAS RASM RAB-1 RAB-250 TWIN
Loads kgf. 60, 100 150 60, 100 150 60, 100, 150, 187.5, 250 60, 100, 150, 187.5, 250 15, 30, 45 (Rockwell Superficial) 60,100,150 (Rockwell)
Initial Load kgf. 10 10 10 10 3 (Rockwell Superficial) 10 (Rockwell)
Max. Test Height mm. 230 230 230 330 330
Depth of Throat mm. 133 133 133 150 150
Max. depth ot elevating screw below base mm. 240 240 240 355 355
Size of base (approx.) mm 170x430 170x430 170x430 210x474 210x474
Machine Height (approx.) mm 655 655 655 850 850
Nett Weight (approx.) kg. 65 65 65 100 100
  Loads & Indentors for Hardness Testers for Rockwell & Brinell Tests.
Total load in kgf. (Initial load 10 kgf.) 60 100 150 187.5 250
Indentor Diamond 120° Ball 1/16" Ø Diamond 120° Ball 2.5 mm  Ø Ball 5mm
Test Scales Rockwell A Rockwell B Rockwell C Brinell,F/D2=30 Brinell, F/D2 =10
Suitable for Tests on case hardened stell Annealed, Ferrous & non ferrous metals Annealed, hardened & tempered deep case hardened steel Annealed steel & cast irons Copper, Copper alloys & Al. alloys
View Complete Details
Ask Latest Price & Details
Brinell Hardness Tester

Brinell Hardness Tester
B - 3000 (H)
B - 3000 (0)
Machine designed with a hydraulic power pack and control circuit effortless loading, unloading operation
A dial gauge in front measure depth of ball penetration. This facilities production testing within tolerance limits by compressiion method
Basic machine design & operation similar to B -3000 (H). In addition 'optical device ' with 14 x magnification provided in front to project dia of ball impression on glass screen with a micrometer measuring system with 0.01 mm accuracy. The indentor swivels & projects dia of ball impression immediately after unloading operation which avoids additional time for measurement of ball impression
Hardness Testers, Model B-3000 (H) & Model B-3000 (O) are precision engineered confirming to IS:2281:1968, BS:240 and ASTM:E 10, however B-3000 (H) & Model 3000 (O) are most suitable for production testing. These machines are designed to measure hardness of castings, forgings, other metals and alloys of all kinds, hard or soft, whether flat, round or irregular in shape.

Technical Data
Model B-3000 (H) B-3000 (O)
Loads (kgf) 250 to 3000 in stages of 250 250 to 3000 in stages of 250
Initial Load (kgf) 250 Nil
Max. Test Height (mm) 410 380
Depth of Throat (mm) 200 200
Max. depth of elevating screw below base (approx.) (mm) 180 180
Machine Height (approx.) (mm) 1127 1185
Net Weight (approx.) (kg) 450 500
Drive Motor (HP) 0.33 0.33
Mains Supply (V/cy/ph) 415/50/3 415/50/3
Optical Device Nil Direct reading optical device
with 14 x magnification
Standard Accessories
Model B-3000 (H) B-3000 (O)
Testing table 200mm dia. 1pc. 1pc.
Testing table 70mm dia. with 'V' groove 
for round jobs - 10 to 80mm dia. 		1pc. 1pc.
Ball Holder 5mm 1pc. 1pc.
Ball Holder 10mm 1pc. 1pc.
Test Block HB - 5 / 750 1pc. 1pc.
Test Block HB-10/3000 1pc. 1pc.
Brinel Microscope 1pc. Nil
Allen Spanner 7 pcs. 4 pcs.
Telescopic Cover for elevating screw protection 1 Set 1 Set
Instruction Manual 1 Book 1 Book


View Complete Details
Ask Latest Price & Details
vickers hardness testers

Vickers Hardness Testers
  • Test Loads 5, 10, 20, 30, 50 kgf
  • Optical Magnification 70 X
  • Optical Measuring Range (mm) 0.1 to 1.0
  • Maximum Test Height (mm) 200
  • Scale Least Count (mm) 0.001
  • Throat Depth (mm) 135
  • Machine Dimension (mm) L 585 x W 290 x H 860
  • Weight (approx) 70 kg
  • Power Supply 220 VAC, 50Hz, 1-Phase
(Model : VM-50 )
Testing range is very wide, from softmetal such as lead, upto the hardest, likehardeness steel.
Same hardness number is obtained onthesame specimen, regardless of theload applied.
The indication is tiny and allows testing of a precision finished part.
Loading and unloading cycle is motorised.
Thin sheet metal is perfectly tested becausethe load applied is very small.
Built - in projection screen to get accurateresults.
Specifications :

'Vickers Hardness Tester is a simple and accurate means to produce and measure the diamond indentation.

These testers are suitable for measuring the hardness of precision metallic parts with wide testing range from soft to hard and their accurate results are widely acclaimed. These testers strictly conform to IS : 1754 and ISO 6507-2.

Number of special acceessories are available on request and as per special requirement.
Construction :

The robust machine frame is designed to accommodate the high precision loading system and an optical projection screen.

Specimen is placed on a testing table. The test cycle is fully automatic. The accurate load is applied on a diamond penetrator by means of a lever and weights. After a specific lapse of time, the load is removed automatically.

The objective is indexed with the test piece and the diamond indentation is projected on the measuring screen.

The diagonals of the indentation can be measured by means of the micrometer screw of the projection screen.

Standard Accessories :
Standard Text Block 1 No.
Diamond Penetrator 1 No.
Weights 1 Set
Flat Anvil 1 No.
Vee-Type anvil (Small & Big) 1 No. each
Spanners 1 set
Electronic Cord 1 No.
Instruction Manual 1 Book
View Complete Details
Ask Latest Price & Details
Computerised Brinell Hardness Tester

Computerised Brinell Hardness Tester
Fully Computerised (PC Based) Brinell Hardness Tester.
Direct and accurate measurement of Brinell Hardness Number using "State of Art"image processing technology.
'Wide Testing Range' : from soft metal to medium hardness steels.
High accuracy and repeatability of measurement at all loads.
Faster measurement yielding to higher productivity.
Hydraulic loading and unloading cycle.
Advanced Window based software.
Latest GUI Features :
User friendly software with all help file and Windows Features
Online indentation setting and focusing on PC monitor.
Advance image processing : Algorithms implemented for precise calculation ofhardness numbers with various options to cover all ranges of specimen.
Batch file Processing :
Option for data / storage and reports generation.
Statistical Evaluation :
Software for calculating standard deviation, mode medium, histogram etc.
Wide options in calibration mode.
Extensibility for future advanced image processing analysis requirements.
'Computerised Brinell Hardness Tester, Model B 3000 - PC is a simple and a accurate means to produce automatically measures the ball indentation to give Brinell hardness number.
These testers are suitable for measuring the hardness of metallic parts with wide leasting range - from soft to hard, and their accurate results are widely acclaimed.
These testers strictly confirm to IS:2281, BS:10003-2 and ASTM E-10.
Construction :
The robust machine frame is designed to accommodate the high precision loading system and an optical device with CCD camera. Specimen is placed on a testing table and brought in contact with clamping cone. Load/Unload/Read operations are done through a 3-position hand lever. The image is digitized using a CCD camera fitted on the optical device and is captured by the PC. The diameters of the indentation are directly measured by Pc to give the Brinell Hardness Number directly.

Technical Data :
 
Total Load kgf 500 to 3000 in stages of 250 kgf
Magnification of objectives - 2x
Max. Test Height mm 380
Scale least Count mm 0.01
Throat Depth mm 200
Machine Dimensions (Approx.) mm L 1025 x W 645 x H 1178
Weight (Approx.) kg 450
Power Supply V/Cy/Ph 415/50/3
Measurement Range mm 1-6
Standard Accessories :
Testing table 200mm dia 1 PC.
Testing table 70mm dia with "V" groove for round jobs 10 to 80mm dia. 1 PC.
Ball holder 5mm 1 PC.
Ball Holder 10mm 1 PC.
Test Block HB-5/750 1 PC.
Test Block HB-10/3000 1 PC.
Allen Spanner 4 PCS.
Telescopic Cover for elevating screw protection 1 SET.
Electric Cord 1 PC.
Instruction Manual 1 BOOK
View Complete Details
Ask Latest Price & Details
Computerised Fully Automatic Brinell Hardness Tester

Computerised Fully Automatic Brinell Hardness Tester
  • Load Range 250 to 3000 kgf in stages of 250kgf
  • Max. test height 380 mm
  • Dept. of throat 200 mm
  • Machine height ( approx ) 1185mm
  • Net Wight ( approx ) 450 kg.
  • Drive Power 0.66 HP
  • Mains supply 415V, 50Hz, 3phase
  • Measuring accuracy with CCD camera and built in optics 0.01 mm
  • Dwell timer 1 to 99sec.
  • Raising/lowering 240 mm/min
  • Testing Table 200mm Ø 1 No.
  • Testing table 70mm Ø 1 No.
  • Ball holder 5mm 1 No.
  • Ball holder 10mm 1 No.
  • Test Block HB-5/750 1 No.
  • Test Block HB-10/3000 1 No.
  • Allen Spanner 4 Nos.
  • Telescopic cover for elevating screw protection 1 Set
  • Instruction Manual 1 No.
Computerised Fully Automatic Brinell Hardness Tester, Model B3000 - PC - FA is fabricated from steel plates and is designed for precise loading system. It is fully automatic machine for production testing. Once the job is placed on testing table and press "Cycle Start" button. The job is raised and brought in contact with clamping device. Then identor is swivelled and brought in vertical loading position. The loading operation starts. After preset dwelling timer, unloading operation starts. As soon as load is fully removed, the indentor is swivelled and the image is digitalized using a CCD camera fitted on machine and captured by the PC.
The diameter of indentation is measured by PC and the Brinell Hardness is displayed on monitor with the help of "State of Art" technology software. The job is lowered down and here the auto cycle is over.
Operationally the machine can be operated after a lapse of interval without operation of push button, so that operator has only to do loading and unloading of job on machine.
This tester is designed for measuring hardness of metallic parts with wide testing range from soft to hard and its accurate results are widely acclaimed.
This tester conforms to IS:2281, BS:10003 and ASTME - 10.
Features :
Fully automatic machine for production testing.
Fully computerised (PC based) Brinell Hardness Tester.
Direct and accurate measurement of Brinell hardness number using "State of Art" image processing technology.
Wide testing range : From soft metal such as lead up to hardest, like tempered steel.
High accuracy and repeatability of measurement at all loads.
Advanced Window XP based software :
- Latest GUI features with user friendly software.
- On line indentation setting and focusing on PC monitor.
- Advanced image processing : Algorithms implemented for precise calculations of hardness numbers with various options to cover all ranges of specimens.
- Batch file processing : Option for data/storage and reports generation.
- Statical Evaluation : Software for calculating standard deviation, mean, medium, frequency distribution graph, variation graph etc.
- Calibration mode facility.
- Extendibility for future advanced image processing analysis, requirements.
- "Auto measurement start" from machine.
Scope of Supply :
Basic machine with CCD camera, optics with illumination system and connecting cable.
PCI video capture card with driver software.
PC and Windows operating system is to be procured by customer.
View Complete Details
Ask Latest Price & Details
Computerized Brinell Hardness Tester

Computerized Brinell Hardness Tester
  • Brand Name FIE
  • Material Metal
  • Machine Height 1178 mm
  • Max Test Height X Throat 380
  • Minimum Order Quantity 1 Piece
We are the leading manufacturers, exporters and supplier of this products.
View Complete Details
Ask Latest Price & Details
microhardness tester

Microhardness Tester
Computerised Microvickers Hardness Tester is a simple and accurate means to produce and automatically measure the diamond indentation to give micro hardness numbers directly. These testers are suitable for measuring the hardness of precision metallic parts with wide testing range - from soft to hard, and their accurate results are widely acclaimed. These testers strictly conform to IS:1754:2002 and ISO 6507-2:1997.Construction :The machine frame is designed to accommodate the high precision loading system. Specimen is clamped by vice or supported by proper fixtures. The test cycle is fully automatic. The accurate load is applied on a diamond indentor by means of dead weights. After a lapse of time, the load is removed automatically. The image id digitallized using a CCD Camera fitted on the machine and is captured by the PC. The diagonals of the indentation are measured by the PC and the Micro Hardness number is displayed directly on monito
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Sachin Purohit (MTMS ENGINEERS PRIVATE LIMITED (formerly Known As Material Testing Mac)
  • Narsinh Residency, Flat No. B-4, 1st Floor, S. No. 81/2-A-1-A Main Road, New Sangvi, Sanghvi, Pune, Maharashtra - 411027
  • Share us via
    Linkedin pinterest

  • Found Something Wrong with this Listing? Report Here.

View Contact No.
Retailer of Testing Equipment from Pune, Maharashtra by MTMS ENGINEERS PRIVATE LIMITED (formerly Known As Material Testing Mac
Product / Services
Post Buy Requirement
ME

MTMS ENGINEERS PRIVATE LIMITED (formerly Known As Material Testing Mac
Sanghvi, Pune, Maharashtra

Write a Review
Call Now Call Now

Our Product / Services

  1. Testing Equipment 10 Products available
  2. Industrial Machinery 9 Products available
  3. Weighing Scales & Measuring Tapes 3 Products / Services available

  4. Grinding Machine

    1 Products available

  5. Cutting Machines & Equipment

    1 Products available

  6. Crusher, Shredder & Presses

    1 Products available

  7. Noodles

    1 Products available

  8. Dynamometer

    1 Products available

  9. Microscope

    1 Products available

  10. Surface Finishing Machines

    1 Products available
  11. Others Products / Services 7 Products / Services available

Testing Equipment

We offer a complete product range of Micro Hardness Tester, Computerised Micro-Vickers Hardness Tester, computerised vickers hardness tester, Rockwell Hardness Testers and Brinell Hardness Tester

Micro Hardness Tester

Micro Hardness Tester
Computerised Microvickers Hardness Tester is a simple and accurate means to produce and automatically measure the diamond indentation to give micro hardness numbers directly. These testers are suitable for measuring the hardness of precision metallic parts with wide testing range - from soft to hard, and their accurate results are widely acclaimed. These testers strictly conform to IS:1754:2002 and ISO 6507-2:1997.Construction :The machine frame is designed to accommodate the high precision loading system. Specimen is clamped by vice or supported by proper fixtures. The test cycle is fully automatic. The accurate load is applied on a diamond indentor by means of dead weights. After a lapse of time, the load is removed automatically. The image id digitallized using a CCD Camera fitted on the machine and is captured by the PC. The diagonals of the indentation are measured by the PC and the Micro Hardness number is displayed directly on monitor.
View Complete Details
Ask Latest Price & Details
Computerised Micro-Vickers Hardness Tester

Computerised Micro-Vickers Hardness Tester
  • Test Loads 10, 20, 50, 100, 200, 300, 500 gf
  • Maximum Test Height 30 mm with clamping vice, 50 mm without clamping vice
  • Sample Stage (XY stage) with micrometer heads of 0.01 LC 10mm movement in each axis
  • Clamping vice capacity 40mm max.
  • Scale least count 0.0001 mm
  • Machine dimension L 450 X W 275 X H 535 mm (Aprox)
  • Weight (approx.) 48 kgs
  • Measuring Range 0.01 to 0.2 mm
  • Vickers Diamond Indentor 136 pyramid 1 No.
  • Standard Test Block 1 No.
  • Spanners 1 Set
  • Supply Cord 1 No.
  • PC interface cable 1 No.
  • Video Capture Card 1 No.
  • Microvicksys Software CD 1 No.
  • Instruction Manual 1 No.
Computerised Microvickers Hardness Testeris a simple and accurate means to produce and automatically measure the diamond indentation to give micro hardness numbers directly. These testers are suitable for measuring the hardness of precision metallic parts with wide testing range - from soft to hard, and their accurate results are widely acclaimed. These testers strictly conform to IS:1754:2002 and ISO 6507-2:1997.
Construction :
The machine frame is designed to accommodate the high precision loading system. Specimen is clamped by vice or supported by proper fixtures. The test cycle is fully automatic. The accurate load is applied on a diamond indentor by means of dead weights. After a lapse of time, the load is removed automatically. The image id digitallized using a CCD Camera fitted on the machine and is captured by the PC. The diagonals of the indentation are measured by the PC and the Micro Hardness number is displayed directly on monitor.


Features :
Fully Computerised (PC based) Micro Hardness Tester.
Direct and accurate measurement of micro hardness number using "State of the art" image processing technology.
Wide testing range : From soft metal such as lead up to hardest, like hardened steel.
High accuracy and repeatability of measurement at all loads.
Small size of indentation makes it a non destructive testing on finised components.
Load slection by external knob.
Motorised loading and unloading cycle.
Small loads allow testing of thin sheet metals.
Advanced Window 98 Based Software :
- Latest GUI features with user friendly software.
- On line indentation setting and focusing on PC monitor.
Advanced Image Processing:Algorithms implemented for precise calculations of hardness numbers with various options to coverall ranges of specimens.
Batch File Processing:Option for data/ storage and reports generation for case depth analysis etc.
Statistical Evaluation:Software for calculating standard deviation, mean, medium, frequency distribution graph, variation graph etc.
- Calibration mode facility.
Scope of Supply
Basic machine with CCD Camera, optics with illumination system and connecting cable.
PCI video capture card with driver software.
PC and Windows operating system is procured by customer. Minimum Pentium II with 64mb RAM & Window 98 / 98SE operatingsytem required.
View Complete Details
Ask Latest Price & Details
computerised vickers hardness tester

Computerised Vickers Hardness Tester
Fully Computerised (PC Based) Vickers Hardness Machine.
Direct and accurate measurement of Vickers Hardness number using"State of the Art" image processing technology.
Wide testing range : from soft metal up to hardest.
High accuracy and repeatability of measurement at all loads.
Faster measurement yielding to higher productivity.
Small size of indentation makes it a non destructive testing on finished components.
Motorised loading and unloading cycle.
Small loads allow testing of thin sheet metals.
Advanced Window XP based software :


Latest GUI Features :
User friendly software with Windows Features.
Online indentation setting and focusing on PC monitor.
Advance image processing : Algorithms implemented for precise calculation of hardness numbers with various options to cover allranges of specimen.
Batch file Processing: Option for Data, storage and reports generation.
Statistical Evaluation: Software forcalculating standard deviation, mean, medium, histogram etc.

Wide options in calibration mode.- Calibration / Verification on PC monitor makes easier to operate.

Specifications :
Computerised Hardness Tester is a simple and accurate means to produce automatically measure the diamond indentation to give Vickers hardness numbers.

These testers are suitable for measuring the hardness of precision metallic parts with wide testing range - from soft to hard and their accurate results are widely acclaimed. These testers strictly confirm to IS 1754 - 2002.
Construction :

The robust machine frame is designed to accommodate the high precision loading.

Specimen is placed on a testing table. The test cycle is fully automatic. The accurate load is applied on a diamond indentor by means of a lever and weights. After a specific lapse of a time the load is removed automatically. The image is digitized using a CCD camera fitted on the machine and is captured by PC. The diagonals of the indentation are automatically measured by PC to give the Vickers Hardness Number.
PC requirements :
Intel Pentium IV 2.00 GHz or above processor is recommended.
Microsoft Windows 98SE or above (Recommended XP)
System Ram : 128 MB or above (Recommended 256 MB)

One RS 232 (serial) port. (PC not included in standard scope of supply)
View Complete Details
Ask Latest Price & Details
Rockwell Hardness Testers

Rockwell Hardness Testers
Features :
Rockwell, Rockwell Brinell Combined, Rockwell / Rockwell Superficial Combined System Hardness Testers.

Hardness Testers, Model RAS, RAB-1, RAB-250, TWIN are manually operated. All these models are suitable for testing hardness of metals sand alloys of all kinds hard or soft, whether flat, round, or irregular shape. These testers are simple in design and easy to operate, yet sensitive & accurate. Various models from the wide range are suitable for schools, laboratories, tool-rooms, inspection, heat treatment departments, factories etc.These testers strictly confirms to IS : 1586 - 2000, ASTM : E 18 for Rockwell Superficial Test and IS : 2281 - 2005, ASTM : E 10 for Brinell test.

Model RAS : Model RAB-1 Model TWIN
Automatic load selection with automatic zero 
setting dial gauge. 


Manual operation. 		Automatic load selection & automatic zero setting dial gauge. Facility for Brinell tests with 187.5 kgf. load with 2.5 mm Ball indicator, additional load 
250 kgf. with 5mm Ball indentor for testing 
hardness of non- ferrous metals. 		Automatic load selection with automatic zero setting dial gauge.
Manual operation. 
Diamond holder is guided in a ball cage, which enables testing of small pins having dia. Less 
than 6 mm (up to 3mm dia.)
Model RAB 250    
Similar to 'RAB-1' but of bigger capacity. Diamond holder is guided in a ball cage, which enables testing of small pins having dia less than 6 mm ( up to 3 mm dia.)  









Standard Accessories :
Model RAS /RASM RAB-1 / RAB-250 TWIN
Testing table 50mm dia 1 pc. 1 pc. 1 pc.
Testing Table 38mm dia with 'V groove for round jobs 6 to 45mm dia. 1 pc. 1 pc. 1 pc.
Diamond Indentor 120° 1 pc. 1 pc. 1pc.
Stell ball Indentor 1/16" 1 pc. 1 pc. 1 pc.
Test Block Rockwell 'C 1 pc. 1 pc. 1 pc.
Test Block Rockwell 'B' 1 pc. 1 pc. 1 pc.
Test Block Rockwell Superficial 'N' Nil Nil 1 pc.
Allen Spanners 5 pcs 5 pcs 5 pcs
Clamping Device 1 pc. 1 pc. 1 pc.
Dash Pot Oil 1 Bottle 1 Bottle 1 Bottle
Rubber bellow for elevating screw protection 1 pc. 1 pc. 1pc.
Instruction Manual 1 Book 1 Book 1 Book
Brinell Microscope Nil 1 pc. Nil
Stell Ball Indentor 2.5mm Nil 1 pc. Nil
Test Block HB 2.5/187.5 Nil 1 pc. Nil
Stell Ball Indentor 5mm ' Nil 1 'pc. -. Nil

Technical Data :
Model Unit RAS RASM RAB-1 RAB-250 TWIN
Loads kgf. 60, 100 150 60, 100 150 60, 100, 150, 187.5, 250 60, 100, 150, 187.5, 250 15, 30, 45 (Rockwell Superficial) 60,100,150 (Rockwell)
Initial Load kgf. 10 10 10 10 3 (Rockwell Superficial) 10 (Rockwell)
Max. Test Height mm. 230 230 230 330 330
Depth of Throat mm. 133 133 133 150 150
Max. depth ot elevating screw below base mm. 240 240 240 355 355
Size of base (approx.) mm 170x430 170x430 170x430 210x474 210x474
Machine Height (approx.) mm 655 655 655 850 850
Nett Weight (approx.) kg. 65 65 65 100 100
  Loads & Indentors for Hardness Testers for Rockwell & Brinell Tests.
Total load in kgf. (Initial load 10 kgf.) 60 100 150 187.5 250
Indentor Diamond 120° Ball 1/16" Ø Diamond 120° Ball 2.5 mm  Ø Ball 5mm
Test Scales Rockwell A Rockwell B Rockwell C Brinell,F/D2=30 Brinell, F/D2 =10
Suitable for Tests on case hardened stell Annealed, Ferrous & non ferrous metals Annealed, hardened & tempered deep case hardened steel Annealed steel & cast irons Copper, Copper alloys & Al. alloys
View Complete Details
Ask Latest Price & Details
Brinell Hardness Tester

Brinell Hardness Tester
B - 3000 (H)
B - 3000 (0)
Machine designed with a hydraulic power pack and control circuit effortless loading, unloading operation
A dial gauge in front measure depth of ball penetration. This facilities production testing within tolerance limits by compressiion method
Basic machine design & operation similar to B -3000 (H). In addition 'optical device ' with 14 x magnification provided in front to project dia of ball impression on glass screen with a micrometer measuring system with 0.01 mm accuracy. The indentor swivels & projects dia of ball impression immediately after unloading operation which avoids additional time for measurement of ball impression
Hardness Testers, Model B-3000 (H) & Model B-3000 (O) are precision engineered confirming to IS:2281:1968, BS:240 and ASTM:E 10, however B-3000 (H) & Model 3000 (O) are most suitable for production testing. These machines are designed to measure hardness of castings, forgings, other metals and alloys of all kinds, hard or soft, whether flat, round or irregular in shape.

Technical Data
Model B-3000 (H) B-3000 (O)
Loads (kgf) 250 to 3000 in stages of 250 250 to 3000 in stages of 250
Initial Load (kgf) 250 Nil
Max. Test Height (mm) 410 380
Depth of Throat (mm) 200 200
Max. depth of elevating screw below base (approx.) (mm) 180 180
Machine Height (approx.) (mm) 1127 1185
Net Weight (approx.) (kg) 450 500
Drive Motor (HP) 0.33 0.33
Mains Supply (V/cy/ph) 415/50/3 415/50/3
Optical Device Nil Direct reading optical device
with 14 x magnification
Standard Accessories
Model B-3000 (H) B-3000 (O)
Testing table 200mm dia. 1pc. 1pc.
Testing table 70mm dia. with 'V' groove 
for round jobs - 10 to 80mm dia. 		1pc. 1pc.
Ball Holder 5mm 1pc. 1pc.
Ball Holder 10mm 1pc. 1pc.
Test Block HB - 5 / 750 1pc. 1pc.
Test Block HB-10/3000 1pc. 1pc.
Brinel Microscope 1pc. Nil
Allen Spanner 7 pcs. 4 pcs.
Telescopic Cover for elevating screw protection 1 Set 1 Set
Instruction Manual 1 Book 1 Book


View Complete Details
Ask Latest Price & Details
vickers hardness testers

Vickers Hardness Testers
  • Test Loads 5, 10, 20, 30, 50 kgf
  • Optical Magnification 70 X
  • Optical Measuring Range (mm) 0.1 to 1.0
  • Maximum Test Height (mm) 200
  • Scale Least Count (mm) 0.001
  • Throat Depth (mm) 135
  • Machine Dimension (mm) L 585 x W 290 x H 860
  • Weight (approx) 70 kg
  • Power Supply 220 VAC, 50Hz, 1-Phase
(Model : VM-50 )
Testing range is very wide, from softmetal such as lead, upto the hardest, likehardeness steel.
Same hardness number is obtained onthesame specimen, regardless of theload applied.
The indication is tiny and allows testing of a precision finished part.
Loading and unloading cycle is motorised.
Thin sheet metal is perfectly tested becausethe load applied is very small.
Built - in projection screen to get accurateresults.
Specifications :

'Vickers Hardness Tester is a simple and accurate means to produce and measure the diamond indentation.

These testers are suitable for measuring the hardness of precision metallic parts with wide testing range from soft to hard and their accurate results are widely acclaimed. These testers strictly conform to IS : 1754 and ISO 6507-2.

Number of special acceessories are available on request and as per special requirement.
Construction :

The robust machine frame is designed to accommodate the high precision loading system and an optical projection screen.

Specimen is placed on a testing table. The test cycle is fully automatic. The accurate load is applied on a diamond penetrator by means of a lever and weights. After a specific lapse of time, the load is removed automatically.

The objective is indexed with the test piece and the diamond indentation is projected on the measuring screen.

The diagonals of the indentation can be measured by means of the micrometer screw of the projection screen.

Standard Accessories :
Standard Text Block 1 No.
Diamond Penetrator 1 No.
Weights 1 Set
Flat Anvil 1 No.
Vee-Type anvil (Small & Big) 1 No. each
Spanners 1 set
Electronic Cord 1 No.
Instruction Manual 1 Book
View Complete Details
Ask Latest Price & Details
Computerised Brinell Hardness Tester

Computerised Brinell Hardness Tester
Fully Computerised (PC Based) Brinell Hardness Tester.
Direct and accurate measurement of Brinell Hardness Number using "State of Art"image processing technology.
'Wide Testing Range' : from soft metal to medium hardness steels.
High accuracy and repeatability of measurement at all loads.
Faster measurement yielding to higher productivity.
Hydraulic loading and unloading cycle.
Advanced Window based software.
Latest GUI Features :
User friendly software with all help file and Windows Features
Online indentation setting and focusing on PC monitor.
Advance image processing : Algorithms implemented for precise calculation ofhardness numbers with various options to cover all ranges of specimen.
Batch file Processing :
Option for data / storage and reports generation.
Statistical Evaluation :
Software for calculating standard deviation, mode medium, histogram etc.
Wide options in calibration mode.
Extensibility for future advanced image processing analysis requirements.
'Computerised Brinell Hardness Tester, Model B 3000 - PC is a simple and a accurate means to produce automatically measures the ball indentation to give Brinell hardness number.
These testers are suitable for measuring the hardness of metallic parts with wide leasting range - from soft to hard, and their accurate results are widely acclaimed.
These testers strictly confirm to IS:2281, BS:10003-2 and ASTM E-10.
Construction :
The robust machine frame is designed to accommodate the high precision loading system and an optical device with CCD camera. Specimen is placed on a testing table and brought in contact with clamping cone. Load/Unload/Read operations are done through a 3-position hand lever. The image is digitized using a CCD camera fitted on the optical device and is captured by the PC. The diameters of the indentation are directly measured by Pc to give the Brinell Hardness Number directly.

Technical Data :
 
Total Load kgf 500 to 3000 in stages of 250 kgf
Magnification of objectives - 2x
Max. Test Height mm 380
Scale least Count mm 0.01
Throat Depth mm 200
Machine Dimensions (Approx.) mm L 1025 x W 645 x H 1178
Weight (Approx.) kg 450
Power Supply V/Cy/Ph 415/50/3
Measurement Range mm 1-6
Standard Accessories :
Testing table 200mm dia 1 PC.
Testing table 70mm dia with "V" groove for round jobs 10 to 80mm dia. 1 PC.
Ball holder 5mm 1 PC.
Ball Holder 10mm 1 PC.
Test Block HB-5/750 1 PC.
Test Block HB-10/3000 1 PC.
Allen Spanner 4 PCS.
Telescopic Cover for elevating screw protection 1 SET.
Electric Cord 1 PC.
Instruction Manual 1 BOOK
View Complete Details
Ask Latest Price & Details
Computerised Fully Automatic Brinell Hardness Tester

Computerised Fully Automatic Brinell Hardness Tester
  • Load Range 250 to 3000 kgf in stages of 250kgf
  • Max. test height 380 mm
  • Dept. of throat 200 mm
  • Machine height ( approx ) 1185mm
  • Net Wight ( approx ) 450 kg.
  • Drive Power 0.66 HP
  • Mains supply 415V, 50Hz, 3phase
  • Measuring accuracy with CCD camera and built in optics 0.01 mm
  • Dwell timer 1 to 99sec.
  • Raising/lowering 240 mm/min
  • Testing Table 200mm Ø 1 No.
  • Testing table 70mm Ø 1 No.
  • Ball holder 5mm 1 No.
  • Ball holder 10mm 1 No.
  • Test Block HB-5/750 1 No.
  • Test Block HB-10/3000 1 No.
  • Allen Spanner 4 Nos.
  • Telescopic cover for elevating screw protection 1 Set
  • Instruction Manual 1 No.
Computerised Fully Automatic Brinell Hardness Tester, Model B3000 - PC - FA is fabricated from steel plates and is designed for precise loading system. It is fully automatic machine for production testing. Once the job is placed on testing table and press "Cycle Start" button. The job is raised and brought in contact with clamping device. Then identor is swivelled and brought in vertical loading position. The loading operation starts. After preset dwelling timer, unloading operation starts. As soon as load is fully removed, the indentor is swivelled and the image is digitalized using a CCD camera fitted on machine and captured by the PC.
The diameter of indentation is measured by PC and the Brinell Hardness is displayed on monitor with the help of "State of Art" technology software. The job is lowered down and here the auto cycle is over.
Operationally the machine can be operated after a lapse of interval without operation of push button, so that operator has only to do loading and unloading of job on machine.
This tester is designed for measuring hardness of metallic parts with wide testing range from soft to hard and its accurate results are widely acclaimed.
This tester conforms to IS:2281, BS:10003 and ASTME - 10.
Features :
Fully automatic machine for production testing.
Fully computerised (PC based) Brinell Hardness Tester.
Direct and accurate measurement of Brinell hardness number using "State of Art" image processing technology.
Wide testing range : From soft metal such as lead up to hardest, like tempered steel.
High accuracy and repeatability of measurement at all loads.
Advanced Window XP based software :
- Latest GUI features with user friendly software.
- On line indentation setting and focusing on PC monitor.
- Advanced image processing : Algorithms implemented for precise calculations of hardness numbers with various options to cover all ranges of specimens.
- Batch file processing : Option for data/storage and reports generation.
- Statical Evaluation : Software for calculating standard deviation, mean, medium, frequency distribution graph, variation graph etc.
- Calibration mode facility.
- Extendibility for future advanced image processing analysis, requirements.
- "Auto measurement start" from machine.
Scope of Supply :
Basic machine with CCD camera, optics with illumination system and connecting cable.
PCI video capture card with driver software.
PC and Windows operating system is to be procured by customer.
View Complete Details
Ask Latest Price & Details
Computerized Brinell Hardness Tester

Computerized Brinell Hardness Tester
  • Brand Name FIE
  • Material Metal
  • Machine Height 1178 mm
  • Max Test Height X Throat 380
  • Minimum Order Quantity 1 Piece
We are the leading manufacturers, exporters and supplier of this products.
View Complete Details
Ask Latest Price & Details
microhardness tester

Microhardness Tester
Computerised Microvickers Hardness Tester is a simple and accurate means to produce and automatically measure the diamond indentation to give micro hardness numbers directly. These testers are suitable for measuring the hardness of precision metallic parts with wide testing range - from soft to hard, and their accurate results are widely acclaimed. These testers strictly conform to IS:1754:2002 and ISO 6507-2:1997.Construction :The machine frame is designed to accommodate the high precision loading system. Specimen is clamped by vice or supported by proper fixtures. The test cycle is fully automatic. The accurate load is applied on a diamond indentor by means of dead weights. After a lapse of time, the load is removed automatically. The image id digitallized using a CCD Camera fitted on the machine and is captured by the PC. The diagonals of the indentation are measured by the PC and the Micro Hardness number is displayed directly on monito
View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

  • Sachin Purohit (MTMS ENGINEERS PRIVATE LIMITED (formerly Known As Material Testing Mac)
  • Narsinh Residency, Flat No. B-4, 1st Floor, S. No. 81/2-A-1-A Main Road, New Sangvi, Sanghvi, Pune, Maharashtra - 411027
  • Share us via
    Linkedin pinterest

  • Found Something Wrong with this Listing? Report Here.

View Contact No.