Paints #1303481

M.S Parag Sales Corporation is one of the trusted Suppliers in Indian market, bringing forth Sigma Coatings that are known for their quality, performance and longevities. We offer Sigma Coatings in different varieties and brands. Few brands of the Sigma Coatings are mentioned below Sigma CoverArrange of tough, durable epoxy coating designed for both new construction and maintenance Sigma DurA comprehensive finishes range of products that delivers outstanding performance in terms of durability, and color and gloss retention SigmafastArrange of products specifically designed to improve productivity through speed of cure of the protective coating Sigma GuardThe Sigma Guard range includes pure epoxy, phenolic epoxy and zinc silicate tank coatings. It offers long term anti-corrosive performance as well as solvent based and solvent free coatings Sigma ShieldA heavy duty reinforced range for tough environments where abrasion and impact resistance are essential Sigma ThermArrange of coatings designed for extreme high temperature conditions, providing dependable long term performance for both new construction and maintenance Sigma ZincA complete range of high-quality zinc primers that can be built-in as a primer in systems with epoxies and polyurethane topcoats Application Area

• Unrivalled Coatings For The Offshore Industry
• PPG Protective & Marine Coatings
• Complete Protection For Petrochemical Industry
• Petrochemical
• Power
• Sustainable Technology

We are offering excellent quality Superlac Acrylic Emulsion Paint which is a specially created acrylic copolymer emulsion. The rich and smooth matt finish of our Superlac Acrylic Emulsion Paint transforms any room to a luxurious hall. Known for excellent flow and coverage, our Superlac Acrylic Emulsion Paint dries up very quickly.

Surface Preparation

• Ensure the surface is dry and free from dust rust, grease, oil and loose matter
• All surfaces should be thoroughly rubbed down using a suitable abrasive paper and there after wiped off

Method Of Application

• After proper surface preparation, apply a coat of suitab/e primer depending on the substrate
• Allow it to dry for 6 - 8 hours. Smoothen the surface by filling dents with thin coat of putty and allow it to dry for 6 - 8 hours
• Sand the surface with emery paper 180 and wipe clean
• Apply another coat of primer and allow drying for 6 - 8 hours
• Sand the surface with emery paper 320 and wipe clean
• Then add Superlac acrylic emulsion with water in the ratio of 7:1 by volume. Apply 2 - 3 coats of paint with an interval of 3 - 4 hours between the successive coats
• Superlac acrylic emulsion can be applied with brush, spray or roller

Product Information

• Finish : smooth with matt
• Coverage : 210 - 230 sq. Ft/ltr/coat (on suitably primed & smooth surfaces by brush application
• Supply viscosity : 13 +/- 2 poise at 30^oc
• Surface dry : within 10 min (at 30+/-1c & 65 +/- 5% r. H. )
• Recoat time : 3hours minimum
• Thinner : Clean tap/potable water
• Primer : Shalimar wall neutralizing cement primer (for new plaster) shalimar water thinnable cement primer (for old painted surface)
• Pack size : 1 liter /4 liter/ 10 liter/ 20 liter
• Area of application : Concrete, plaster, false ceiling

We are engaged in supplying Superlac Hi-Gloss Enamel Paint. The Superlac Hi-Gloss Enamel Paint offered by us is premium multi-purpose enamel used for interior as well as exterior application. The Superlac Hi-Gloss Enamel Paint provided by us is known for its fast drying nature. The Superlac Hi-Gloss Enamel Paint gives smooth finish with excellent gloss along with excellent leveling properties with a long durable protection to substrate.

Surface Preparation

• Ensure the surface is dry and free from dust rust, grease, oil and loose matter
• All surfaces should be thoroughly rubbed down using a suitable abrasive paper and there after wiped off

Method Of Application

• After proper surface preparation, apply a first coat of primer depending on the surface of application
• Allow drying for 6-8 hours
• Smoothen the surface by filling dents with thin coat of putty and allow it to dry for 6-8 hours
• Sand the surface with emery paper 180 and wipe clean
• Apply another coat of primer and allow drying for 6-8 hours
• Sand the surface with emery paper 320 and wipe clean
• Apply 2 coats of Superlac hi-gloss enamel by brush/ spray with an interval of 12 hours between successive coats

We make available Xtra Premium Paint, a premium exterior finish formulated with pure acrylic emulsion. The tough and durable film of our Xtra Premium Paint effectively withstands extreme tropical condition of high rainfall, humidity, heat and cold. The Xtra Premium Paint ensures extra protection for exterior masonry, brickwork, etc. The co-polymer system of this Xtra Premium Paint is specially formulated with light-fast pigmentsto keep the looks of exterior walls at their best year after year.

Surface Preparation

• Removes dust, loose particle, chalk marks, grease, algae & fungi by wire brushing and wash with water jetting
• Old painted surface should be sanded thoroughly
• In case of newly constructed surface, a minimum of 3 months curing time is required beforepainting
• Apply cement sand plaster to fill cracks and level surfaces
• Do not apply putty
• Stop water leakages and seepages completely
• Give special attention to parapets and other horizontal surfaces, which are especially susceptible to fungi and algae
• For surface already infected with algae and fungi, necessary surface treatment for removing the same must be adopted before painting

Method of Application

• Thin 1 liter of paint with 400 ml of clean fresh water and apply 2 coats of paint
• For newly plastered surfaces, do not apply cement primer
• Use Shalimar xtra as priming coat by thinning 1 liter of paint with 1 liter of clean fresh water or apply Shalimar exterior acrylic primer
• Apply 2 coats at an interval of 4 hrs minimum
• On horizontal surfaces or parapets use 3 coats

We make available excellent quality NO.1 Silk Emulsion Paint. This NO.1 Silk Emulsion Paint is specially designed interior emulsion paint, developed as per the current market trends. Our NO.1 Silk Emulsion Paint gives smooth and durable matt finish to the walls. Moreover, our NO.1 Silk Emulsion Paint is available in a wide range of designer shades catering to diverse demands.

Surface Preparation

• Ensure the surface is dry and free from dust rust, grease, oil and loose matter
• All surfaces should be thoroughly rubbed down using a suitable abrasive paper and there after wiped off

Method of Application

• After proper surface preparation, apply a coat of suitable primer depending on the substrate
• Allow it to dry for 6 - 8 hours
• Smoothen the surface by filling dents with thin coat of putty and allow it to dry for 6- 8 hours
• Sand the surface with emery paper 180 and wipe clean
• Apply another coat of primer and allow drying for 6 - 8 hours
• Sand the surface with emery paper 320 and wipe dean
• Then add 1 liter of no. 1 silk emulsion in 500 ml of water
• Apply 2 -3 coats of paint with an interval of 3 - 4 hours between the successive coats no.1 silk emulsion
• It can be applied with brush, spray or roller

Product Information

• Finish : smooth with matt
• Coverage : 190 - 210 sq. Ft/ltr/coat (on suitably primed & smooth surfaces by brush application
• Supply viscosity : 13 +/- 2 poise at 30^oc
• Surface dry : within 20 min (at 30+/-1^oc & 65 +/- 5% r. H.)
• Recoat time : 4 hours minimum
• Thinner : clean tap/potable water
• Primer : Shalimar wall neutralizing cement primer (for new plaster) Shalimar water cement primer (for old painted surface)
• Pack size : 1 liter /4 liter / 10 liter / 20 liter
• Area of application : All kinds ofplaster, concrete and a variety of other surface