Ms. Perma Construction Aids Pvt. Ltd.

Mulund West, Mumbai, Maharashtra

Perma Master Floor - SL is a three components epoxy resin based mortar for application to a variety of subfloors as a joint less, thin, self-leveling topping. Perma Master Floor - SL quickly provides a permanent, hard wearing chemical resistant finish for floors and corridors subject to pedestrian and light wheeled traffic. it provides a smooth, hygienic and dust free floor that can be easily cleaned. Primary Uses : To provide a seamless, hygienic, self-leveling floor topping for areas subject to pedestrian and light wheeled traffic. Advantages :

• High compressive, flexural and tensile strengths in excess of concrete
• Available in range of attractive colours Brown, Green, Blue, Grey, etc
• Chemical Resistant and waterproof.
• Hygienic and non-dusting
• Easy to use, easy to clean
• Epoxy based, supplied in pre-weighted units
• Will not support bacterial growth
• Packing : It is supplied in 5 kg and bulk in pre-weighted units.

We are offering concrete repair mortar. Perma crackfill or concrete repair mortar is a specially formulated repair mortar designed to fully meet the requirement of effectively repairing cracks in plasters and in concrete, avoiding the use of costly sealants and putties. Concrete repair mortar or perma crackfill is a dry powder when mixed with water it forms a creamy consistency paste which is ready for use in repairing cracks and repairing plasters. Concrete repair mortar or perma crackfill is reinforced with alkali resistant fibers. primary uses

• perma crackfill is ideally suited for repairing of superficial plaster cracks as well as structural cracks
• perma crack fill can be used for repairing ceiling cracks and plasters with ease because of its viscosity
• cracks arising due to plasters cracking at junctions of wall and column or brick work and suffix of beam can be effectively sealed
• cracks at parapet wall junction and roof slabs are also sealed with perma crackfill
• the product is suitable for rendering
• as a non-shrink waterproof filler in between rcc and brickblock work
• directions for use preparation : it is essential that the surface of the concrete to be repaired is sound, clean and uncontaminated. Chase the crack and form a neat "v" shaped groove at least 6 mm wide on surface. Damaged plasters can be cut out in more or less square sides. mixing just add waterto perma crackfill by volume in the ratio of 1 water to 4 volumes of powder and mix thoroughly to get an even consistency mortar. In demanding situations perma bond can be used to replace water and the same can be used for priming the surfaces before application of perma crackfill. Whereas, mixing by trowel is suitable for small mixes, it is recommended that an efficient mechanical mixer be used. subsistent finishing perma crackfill is suitable for all subsequent decorative finishes and painting. The finish obtained by perma crackfill is far smoother than conventional plasters. coverage in crack repair 1 kg. Of crackfill repairs 11 linear feet of crack chased to a width of 6 mm and a depth of 3mm. In rendering 60 kgs of crack fill covers 100 sqft when applied to 2mm thickness. packing available in
  • 1 kg
  • 10 kg
  • 25 kg sacks
  • quality assurance should you find the behavior of the product different from the normal feel or the claims with the literature, stop the use of the product, cordon off all such product and inform perma with a complaint letter stating the problem, batch number etc. Lf the product is used in spite of observed variance the responsibility shall be with the user.

Perma Polycrete is a cementatious grey powder with micro fine aggregates which allows reconcreting of the damaged, dillapidated structures. The product is a boon for present day rehabilitation engineers. The product needs only addition of water to form concrete with enormous initial and final strengths. The product is reinforced with glass fibers to strengthen cohesion and make it crack resistant. Primary Uses :Perma Polycrete is a very handy tool in the hands of an advanced structural repair engineer to reconstruct parts of beam a and columns with far superior strength, fair finished and with very high speed. Advantages :

• Perma Polycrete is fairly viscous hence it can be applied on vertical surfaces and soffit of beams and ceiling with ease.
• Perma Polycrete develops light compressive tensile and flexural strength in excess of parent concrete.
• Perma Polycrete develops a very strong bond with the parent concrete. It is impermeable and protects reinforcements from corrosion.
• It does not need elaborate curing just sprinkling water for 2-3 days is sufficient for gaining good compressive strength

Packing : Perma Polycrete is supplied in 10 kgs & 25 kgs sack

Perma Rapid Repair is a free flowing fine powder designed to achieve a quick repair system for concrete structures. The product achieves very high strength with in minutes. Primary Uses :Perma Rapid Repair is suitable in the following areas :

• To repair edges of columns and beams damaged during de-shuttering
• To repair ceiling concrete damaged while de-shuttering
• To repair edges at doors and windows
• To repair general honey combs

Advantages :

• Perma Rapid Repair becomes hard and achieves high strengths within minutes or repair
• It is non shrink
• It is easy to use
• It is economical to use
• Replaces costly phenolic resin system

Packing : Perma Rapid Repair is available in 1 kgs, 10 kgs and 25 kgs packing.

Perma Recrete is a cementatious grey powder with micro fine aggregates which allows reconcreting of the damaged, dilapilated structures. The product is a boon for present day rehabilitation engineers.The product needs only addition of water to form free flowing concrete with enormous initial and final strengths. Primary Uses :Perma Recrete is a very handy tool in the hands of an advanced structural repair engineer to reconstruct parts of beams and columns with far superior strength, fair finished and with very-high speed. Grouting structural cut outs and recess in sanitary fittings like floor traps, annular spaces of pipe passes through walls etc., in residential buildings. Advantages :

• Perma Recrete has very high work ability hence it can be poured in to the shutters with a mug also This workability helps the product to reach all minor crevices and fill effectively
• Perma Recrete develops very high early strength. It develops strength of the parent concrete within 24 hours of pouring
• Perma Recrete develops a very strong bond with the parent concrete. It is impermeable and protects reinforcements from corrosion
• It does not need elaborate curing just sprinkling water for two days is enough

Packing : Perma Recrete is supplied in 25 kgs & 50 kgs sack.

Our PermaCem is recommended for producing shrinkage compensated, fast setting, and drying high-strength screeds. It prepares a potent base for laying tiles whether of ceramic, PVC, linoleum, wooden, etc., carpeting, or for any other flooring system. That is what makes PermaCem a highly efficient hydraulic binder. We are one of the acknowledged Manufacturers, Exporters, and Suppliers of PermaCem from Mumbai, India. Buy it at the lowest prices from us! Primary Uses

• Permacem is used for creating a strong quick drying base for laying of various floor tiles, carpets, Self leveling screeds etc.
• Permacem is used for repairing floor screeds subjected to foot traffic in supermarkets, hospitals, airports warehouses, Walkways etc.
• Permacem is used for preparing scrreds subjected to light foot traffic before installation of resilient flooring of choice.

Advantages

• Permacem Needs only addition of graded aggregates and recommended amount of water for preparing strong quick drying dependable mortar which is easy to mix and use.
• Permacem is shrinkage Compensated and hence there are no chances of shrinkage Cracks. It is quick drying. Tiling mortars or self-leveling screeds can be laid within 3 to 4 hours of laying of Permacem Screed.

Packing : Permacem is supplied in 25kg and 50kg sacks.

Perma Jointing Mortar

POLYMER BASED CEMENTITIOUS MORTAR FOR HEAVY DUTY MASONRY POINTING AND
PATCH UP REPAIR OF CONCRETE STRUCTURES

DESCRIPTIONPerma Jointing Mortar is a cementitious powder which needs just addition of required amount of water to form a thicksotropic paste which is slump free and ideal for use as a pointing material in the stone masonry structures of dams and historic buildings.

PRIMARY USESPerma Jointing Mortar is primarily used as pointing mortar in heavy masonry structures of dams, hydraulic structures and historic buildings. It is also successfully used in repair of structural members in buildings where high strength and non slump mortar is required especially when these repairs are to be carried out against gravity.

ADVANTAGES

• Perma Jointing Mortar is a single component product and needs only addition of water on site hence easy to use.
• Perma Jointing Mortar achieves high compressive, tensile and flexural strengths apart from its strong adhesive strength.
• Perma Jointing Mortar is non-shrink when applied in the recommended thickness and does not need elaborate curing.
• Perma Jointing Mortar is highly thicksotropic hence non slump when applied in vertical surfaces or on the soffits.

DIRECTIONS FOR USE

Mix Perma Jointing Mortar with water in the proportion of 130 ml water to 1 kg of jointing mortar powder and mix thoroughly using a slow speed mechanical mixer to get a smooth consistency paste. As with all repair jobs the site conditions vary hence the water / powder ratios may be adjusted to suit the application requirements. Apply an epoxy bonding agent such as Perma Master Bond on the surface to be repaired or on the sides of the stone in the joint to be pointed and wait till it becomes tacky which could be two hours from the time of application. Apply the jointing mortar paste on to the surface using a suitable spatula so that the thickness of fill or repair is not more than 20 mm at a time. Should the thickness increase the first layer may be serrated after finishing to create a mechanical key for the second coat. The second coat may be applied after the first coat has hardened leaving it to cure overnight.

PROPERTIES
YIELD / COVERAGEPerma Jointing Mortar gives a yield of 12.5 Ltrs. when mixed with 25 Kg powder.60 kgs of Perma Jointing Mortar covers an area of 50 sq.ft if applied to a thickness of 4 mm.

PACKINGPerma Jointing Mortar is available in 10 kg & 25 kg sacks.

SHELF LIFEPerma Jointing Mortar has a shelf life of 12 months if kept in a dry environment, in its original packing. If stored in conditions of high temperature and / or humidity, the shelf life may be reduced to as little as 4 months.

Perma Non Slip adhesive is a cementitious material in powder form, which only needs on site addition of water to make a paste which is used for fixing tiles over existing mosaic tiles without removing them. Perma Non Slip Adhesive is also used for fixing tiles on difficult surfaces. Primary Uses :Perma Non Slip Adhesive is mainly used for fixing glazed, ceramic terracotta tiles and vitreous tiles, marble and granite tiles on existing mosaic or ceramic floor tiles without removing them or hacking them. Perma Non Slip Adhesive is also used for tiling on difficult vertical cementitious surfaces and in cases where the weight of the tile is more than the normal ones. Advantages :

• Can be used for fixing tile over tile
• No need to break or hack the existing tiles
• No wetting of surface to be tiled
• No wetting of surface to be tiled
• Makes the tiled area waterproof
• Holds the tile even at high temperatures
• Single component hence easy to use
• With stand temperatures up to 200 - 0 ^oC
• Can also be used for filling joints

Packing : Perma Non Slip Adhesive is available in 10 Kg. and 25 Kg. multi-wall laminated sacks.

Perma Weather Proof Adhesive is a cementitious material in powder form, which only needs on site addition of water to make a paste which is used for fixing tiles or stone cladding to vertical as well as horizontal cementitious surfaces. Primary Uses :Perma Weather Proof Adhesive is mainly used for fixing glazed, ceramic, terracotta tiles and vitreous tiles to the walls or floors on smooth plastered or concrete surfaces. Perma Weather Proof Adhesive is also used for fixing tiles or stone cladding on exterior walls and tiles in swimming pools and for fixing of marble tiles on any cementitious surfaces. Advantages :

• Easy to use
• No wetting of tiles required before fixing
• No wetting of surface to be tiled
• Makes the tiled area waterproof
• Hold the tile even at high temperatures
• with stands temperatures upto 200^oC

Packing : Perma Weather Proof Adhesive is available in 10 kg. and 25 kg multi-wall laminated sacks

Perma Latex - AR is based on acrylic co-polymers, special adhesive and bonding chemicals along with hydrofillic agent. Perma Latex - AR gives a versatile performance in many civil engineering applications. The product is milky white liquid. Primary Uses :Perma Latex - AR is a high quality emulsion which enhances the performance of cement mortar and concrete. Some example from its innumerable uses are as follows :

• An excellent product in concrete repairs as in combination with cement (1:1) it produces a very strong primer and as an additive in the mortar to make strong water proof plaster
• In case of multi layered plaster Perma Latex - AR bonding slurry helps in building up layer. The bond coat not only serves as a bonding agent but ales as a water proof barrier
• Perma Latex - AR modified mortar are used in joining prefabricated members and as bedding mortar in precast block work to secure water tight joints
• In terrace waterproofing and patch up repairs Perma Latex AT forms an important member as it helps binding new plaster and ales helps in making non shrink crack free mortar for repairs
• Cement Perma Latex - AR slurries are used as corrosion inhibitor on exposed reinforcement and on bridge griders to protect them from attack of chlorides and sulphates

Advantages :

• Perma Latex - AR is a very strong bonding agent for mortars and concrete to bind with old concrete, stones, steel, brick etc
• Perm Latex AR is a strong corrosion inhibitor. It prevents entry of chloride and sulphate ions into the cementitious structure
• Perma Latex - AR is a superior water proofing product
• Perma Latex, AR is an excellent adhesive for tiles, stones, marble and granite tiles
• It is very easy to use and is non toxic. Perma Latex - AR poses no environment hazards
• Perma Latex - AR increases the compressive, tensile and flexural strength of concrete and mortars
• Perma Latex - AR makes mortars non shrink, strong and dust proof
• Perma Latex - AR is successfully used as a primer to brick bat coba systems on terraces
• Perma Latex - AR is economical than many similar products yet gives multi fold advantages

Packing : Perma Latex - AR is available in 25 liter and 10 liter packing

Perma Bond Repair is an aqueous emulsion of styrene butadiene copolymer latex, specially formulated for use with cement. Perma Bond Repair modifies the property of cement in mortars and in concrete to make them perform better in terms of waterproofing, repair, corrosion inhibition, bonding, durability and wear resistance. We provide Perma Bond Repair that is made of superior chemicals. That�s why, we are a famous Manufacturer, Supplier and Exporter of Perma Bond Repair in India. Primary Uses :

• Corrosion protection of steel
• Floor screed and topping
• Concrete and floor screed repairs
• Water proofing and tanking of basements
• Bonding old concrete to new concrete.

Packing : Perma Bond Repair is available in 100ml, 1 liter, 5 liters, 10 liters, 25 liters and 100 liters drum.