Perma Grout Admix

LIQUID POLYMER ADMIXTURE FOR TILE GROUTS AND TILE FIXING MORTARS

DESCRIPTIONPerma Grout Admix is a white liquid, based on special polymers, which enhances the performance of tile grouts and tile adhesives. In demanding situations and in critical applications when the performance of the conventional tile grout or the tile fixing adhesives and tile mortars are not measuring up to the performance criteria required in the given situation, then addition of Perma Grout Admix fills this gap by enhancing the performance of these products to the full satisfaction of the site requirement.

PRIMARY USESPerma Grout Admix is used in the tile grouts and to improve its flexibility, adhesion to the tile edges and to make it crack resistant. Perma Grout Admix enhances the color of the tile grout and makes it lustrous. Perma Grout Admix enhances the overall strength of the tile grout and makes it highly workable in the plastic state. In hardened state the tile grout becomes resistant to wear and tear and powdering.In tile adhesives and in tile mortars Perma Grout Admix improves the mechanical strength and improves adhesion characteristic, makes the mortars and adhesives more workable and improves wetting of the back of the tile.

GUIDE TO APPLICATIONMix Perma Grout Admix with water in the proportion of 1:1 and use this mixture in tile grouts and tile adhesives and tile mortars to get the desired consistency of application. All normal practices of tiling and tile joint grouting need to be followed as usual. Since the adhesive property of grout gets enhanced it is suggested that the cleaning of the tile of the spillages of the grout on tile may be done faster or alternatively use masking tape on the edges of the tile.

COVERAGEGenerally 10 kgs of powder ( whether Tile Adhesive or Tile Joint Filler ) requires 2 litres of liquid ( which is Tile Grout diluted with water in 1:1 proportion ) to make a workable paste. Hence one litre Perma Grout Admix is required for every 10 Kgs of Tile Adhesive or Tile Joint Filler. The coverage of the paste is governed by the TDS of those powders.

CAUTIONWhen Perma Grout Admix is used in Tile Grouts there will be an apparent gain / loss in the shade on the tile grout on the darker / lighter side. But when the grout dries it is expected to match the original shade. However it is advised that trials be conducted to ascertain the correct out come of the shade with the use of Perma Grout Admix and suitable shade of the Tile Joint Filler be selected to match the required end the result.

PACKINGPerma Grout Admix is supplied in 100 ml, 500 ml, 1 ltr, 5 ltr, 10 ltr & 20 ltr pack.

SHELF LIFEPerma Grout Admix can be stored in standard conditions for a period of 24 months from the date of manufacture.

DISCLAIMER

• PERMA warrants that all products are free from any defects of manufacture and comply with the specifications given in their respective technical data sheet. No warranty can be given as to the results of use because conditions of use, such as site conditions, surface preparations, workmanship, weather, structural issues and other factors are beyond the control of PERMA. Purchaser agrees to seek the advice of qualified professionals to carry out tests & take trials to determine the suitability of products for their intended purpose prior to full scale usage of PERMA products and assumes all risks.
• The company does not assume any liability for unsatisfactory results, arising from the use of our products. Purchaser’s sole liability is limited to replacement of product or refund of the purchase price paid if any product proven defective. No other warranties, express or implied, shall apply including any warranty of merchantability or fitness for a particular purpose.
• PERMA shall not be liable for any consequential damages arising from the use of our products for unsatisfactory results.
• The information supplied in this datasheet is based on our experience through extensive research and is given in good faith in order to help prospective users. We reserve the right to update the information provided in our technical data sheet at any time without prior notice within the scope of technical progress or new developments.

If you are looking for excellent quality waterproofing products, you are in the right place. Perma Construction Pvt. Ltd. has amazing quality waterproofing products that have gained worldwide appreciation. Based in Gujarat our company is known all over the world and especially in countries like Sri Lanka, Nepal, Bangladesh and many more.

Our company is known as the best waterproofing products suppliers today. All this is because of the excellent coordination among our team members which makes us able to deliver products always on time. We have never got late with our delivery which attracts a maximum number of customers today.

Thus, try out our services and products by ordering them online. Have faith and trust our company as we are reliable waterproofing products manufacturer and supplier.

We are a trustworthy name, involved in offering excellence in the form of Concrete Admixture. We are immensely recognized for delivering the orders within the stipulated time frame and at desired Mumbai(India).

Water is the vital resource for us but it is one of the biggest enemies of construction material which is why you should use waterproofing powder in your structures to keep them safe and secured. The water damage can go to an extreme level and can lead to building failure which is why using this powder from a popular and well-known company like Perma Construction Aids Pvt. Ltd is very important.

We are the leading waterproofing powder manufacturer and exporter and we simply perfect solutions and water repellents for your construction. Therefore visit our website and get our products in the required amount we will supply your our products on time.

Choosing us would be an excellent idea because with our extraordinary service and products we have become the topmost waterproofing powder supplier in Gujarat, India.

Waterproof Material for Waterproofing

We are a leading manufacturer and exporter of an extensive range of Crystalline Waterproofing to our Distinguished Clients. These products are manufactured by utilizing Perma Seal Powder acquired from trustworthy vendors in the market. Our range of Crystalline Waterproofing products is used in an assortment of applications such as arresting leakage from old as well as new leaky overhead and subversive water tanks. We offer these products to our clients at market leading rates.

Perma Rheoplast is based on hyper plasticising sulphonated synthetic Naphthalene polymers. It may dispensed at dosages varying between 0.3 to 2% by weight of cement depending upon type of concrete required. Primary Uses :

• Perma Rheoplast is recommended in all high grade concrete which has a cement content of over 375 kgs. Per m3
• Perma Rheoplast is recommended in hot weather concreting where workability retention over long periods are required
• Perma Rheoplast is recommended in marine structures, pile foundations, bridge girders, caissons and such structures where quality of concrete is of prime importance
• Perma Rheoplast is also recommended where very high initial and ultimate strengths are expected
• Perma Rheoplast is an ideal product to used in R.M.C plants

Advantages :

• Hyper Plasticising action of this product produces free flowing concrete, with most kinds of aggregates and varying fine aggregates
• Perma Rheoplast maintains the workability over long periods
• Perma Rheoplast helps in production of high quality concrete which exhibits superior compressive, tensile and flexural strengths and exhibits excellent resistance to chloride and sulphide attacks on concrete
• Perma Rheoplast is compatible with all types of cements including puzzolonic and fly ash/slag cement
• Perma Rheoplast is specially suggested in all high strength concrete and in construction of marine structures, pile foundations and bridge girders
• Perma Rheoplast enables production of dense impermeable and fair finish concrete

Packing : Perma Rheoplast is available in 25 kgs, 100 kgs and 240 kgs. HDPE drum packing

Perma Plast PC 202 is based on polycarboxylic ether and synthetic polymers. This Perma Plast PC 202 can be dispensed at dosages varying between 0.6 to 2 percent by weight of cement depending upon type of concrete required. We are the most trustworthy Manufacturer, Exporter and Supplier of the finest range of Perma Plast PC 202. Our range of Perma Plast PC 202 is very cost-effective. Primary Uses :

• Perma Plast PC 202 is recommended in all high grade concrete which has a cement content of over 375 kgs./m3.
• Perma Plast PC 202 is recommended in hot weather concreting where workability retention over long periods are required.
• Perma Plast PC 202 is recommended in marine structures, pile foundations, bridge, girders, caissons and such structures where quality of concrete is of prime importance.
• Perma Plast PC 202 is also recommended where very high initial and ultimate strengths are expected.
• Perma Plast PC 202 is also recommended for use with microsillica.

Packing : Perma Plast � PC 202 is available in 30 kg. And 250 kgs drum.

Perma Plast PC 401 is based on hyper plasticizing sulphonated synthetic polymers. The Perma Plast PC 401 may be dispensed at dosages varying between 0.5 to 2 percent by weight of cement depending upon type of concrete required. We are manufacturing, exporting and supplying the best quality Perma Plast PC 401 across the world. Our range of Perma Plast PC 401 can be availed at the most competitive price range. Primary Uses :

• Perma Plast PC 401 is recommended in all high grade concrete which has a cement content of over 400kg/m3.
• Perma Plast PC 401 is recommended in hot weather concreting where workability retention over long periods is required.
• Perma Plast PC 401 is recommended in marine structures, pile foundations, bridge girders, caissons high rise structures and such structures are expected.
• Perma Plast PC 401 is also recommended where very high initial and ultimate strengths are expected.

We are the known provider of Perma Plast Super 220 in the industry. Our Perma Plast Super 220 is a high range, low dosage, super plasticizing admixture for slump retention. This Perma Plast Super 220 is a product based on refined naphthalene formaldehyde and lignosulphonate blends. We manufacture, export and supply the finest quality Perma Plast Super 220 at the most economical price range. Primary Uses :

• To produce self â�� compacting flowing concrete
• To produce high early strength concrete for delayed slump retention and for long over hauls
• Ideally suited for commercial RMC plants and concrete made with crushed sand.

Dosage : Field trials should be conducted to determine the optimum addition rates of perma plast super � 220, however a dosage of 300 gms to 500 gms is recommended per 50 kg bag of cement. Packing : Perma Plast Super � 220 is available in 120 kg & 240 Kg HDPE drum.

Perma Plast Super – 230

 

HIGH RANGE HYPER PLASTICISING SUPERIOR QUALITY ADMIXTURE FOR HIGH QUALITY CONCRETE

 

DESCRIPTION

Perma Plast Super – 230 is based on hyper plasticising sulphonated synthetic polymers. It may be dispensed at dosages varying between 0.5 to 2 percent by weight of cement depending upon type of concrete required.

 

PRIMARY USES

• Perma Plast Super – 230 is recommended in all high grades concrete.
• Perma Plast Super – 230 is recommended in hot weather concreting where workability retention over long periods is required.
• Perma Plast Super – 230 is recommended in marine structures, pile foundations, bridge girders, caissons and such structures where quality of concrete is of prime importance.
• Perma Plast Super – 230 is also recommended where very high initial and ultimate strengths are expected.

 

ADVANTAGES

• ne aggregates.owing concrete, with most kinds of aggregates and varying Hyper plasticising action of this product produces 
• Perma Plast Super – 230 maintains the workability over long periods.
• exural strengths and exhibits excellent resistance to chloride and sulphide attacks on concrete.Perma Plast Super – 230 helps in production of high quality concrete which exhibits superior compressive, tensile and 
• Yash / slag cements.Perma Plast Super – 230 is compatible with all types of cements including pozzolanic and 
• Perma Plast Super – 230 is specially suggested in all high strength concrete and in construction of marine structures, pile foundations and bridge girders.
• Nish concrete.Perma Plast Super – 230 enables production of dense impermeable and fair 

 

PACKING

Perma Plast Super – 230 is available in 30 kg and 250 kg drum.

Perma Multi Plast is a unique admixture based on complex polymeric chemical structure which works wonderfully with all grades of concrete in all weather conditions. The Perma Multi Plast imparts high compressive tensile and flexural strength to the concrete. This Perma Multi Plast admixture is of immense use in making the concrete highly workable and in retaining the workability over long hours. We are known as the most trusted Perma Multi Plast Manufacturer, Exporter and Supplier in the market. Primary uses :

• Perma : Multi Plast is recommended in all type of concrete.
• Perma : Multi Plast is recommended in hot weather concreting where workability retention over long periods is required.
• Perma : Multi Plast is also recommended where very high initial and ultimate strengths are expected.

Advantages :

• Multi plasticizing action of this product produces free flowing concrete, with most kinds of aggregates and varying fine aggregates.
• Perma : Multi Plast maintains the workability over long periods.
• Perma : Multi Plast helps in production of high quality concrete which exhibits superior compressive, tensile and flexural strengths and exhibits excellent resistance to chloride and sulphide attacks on concrete
• Perma : Multi Plast is compatible with all types of cements including puzzolonic and fly ash / slag cements
• Perma : Multi Plast is specially suggested in all high strength concrete.
• Perma : Multi Plast enables production of dense impermeable and fair finish concrete

Direction for use : Mix the admixture with water in the given proportions and dose at the rate 0.5 % to 2% by weight of cement of the diluted material. The dosing of the admixture is done along with the dosing water in the mixture drum. Addition of admixture to the dry cement should be avoided. Should the need arise, to maintain the work ability over long hours an additional dosage of admixture can be added to the concrete before the effect of the previous dosage wears off. Typical Properties :

• Colour : Dark Brown Liquid
• Specific Gravity : 1.3 at 25^oC
• PH : 7.5
• Chlorides : Nil. Free from added chloride
• Nitrates : Nil. Free from added nitrates
• Sulphates : 0.5% w/w
• Freezing Point : + 5^oC Material can be reconstituted by agitation at 30^oC
• Usage : Dilution with water at recommended proportions

Dosage : 0.5% to 2% by weight of cement depending upon grade of concrete of the diluted material Health and Safety : Perma-Multi Plast is not a health hazard or fire risk. Spillages should be washed immediately to avoid possibilities of slipping. Packing : Perma � Multi Plast is available only in 30 kg drum. Bulk packing could be considered on special request. Shelf Life : Twelve months if stored in manufacturer's original drums. Perma � Multi Plast should be stored in a place where temperature doesnot drop below +5^oC. If the product is frozen, thaw at +30^oC and agitate until completely reconstituted. Shake well before use Qualtiy Assurance : All �PERMA� branded products are manufactured under strict quality control supervision as per exact manufacturing specifications. Should you find the behaviour of the product varying from the claims in the data sheets please stop the use of the product and contact Perma staff or Distributor. Statement of Presponsibility : Perma branded products when used in accordance with the current published directions for use, perform as per their data sheets / catalogues. The manufacturer and the Distributor will not be responsible for other materials and conditions of inferior workmanship.

Perma Plast PC – 101

HIGH RANGE HYPER PLASTICISING SUPERIOR QUALITY ADMIXTURE FOR HIGH QUALITY CONCRETE BASED ON POLY CARBOXYLIC ETHERS

DESCRIPTIONPerma Plast PC – 101 is based on hyper plasticising Poly Carboxylic Ethers. It may be dispensed at dosages varying between 0.4 to 3 percent by weight of cement depending upon type of concrete required.

PRIMARY USES

• Perma Plast PC – 101 is recommended in all high grade concrete which has a cement content of over 350 kg/m3.
• Perma Plast PC – 101 is recommended in hot weather concreting where workability retention over long periods is required.
• Perma Plast PC – 101 is recommended in pile foundations, bridge girders, caissons, high rise structures and such structures where quality of concrete is of prime importance.
• Perma Plast PC – 101 is also recommended where very high initial and ultimate strengths are expected.

ADVANTAGES

• Hyper plasticizing action of this product produces free flowing concrete, with most kinds of aggregates and varying fine aggregates.
• Perma Plast PC – 101 maintains the workability over long periods.
• Perma Plast PC – 101 helps in production of high quality concrete which exhibits superior compressive, tensile and flexural strengths and exhibits excellent resistance to chloride and sulphide attacks on concrete.
• Perma Plast PC – 101 is compatible with all types of cements including pozzolanic and fly ash / slag cements.
• Perma Plast PC – 101 is specially suggested in all high strength concrete and in construction of marine structures, pile foundations and bridge girders.
• Perma Plast PC – 101 enables production of dense impermeable and fair finish concrete.

DIRECTIONS FOR USEPerma Plast PC – 101 should be added to the mix along with water. Addition of plasticizers to the dry mix or dry cement should be avoided. During long transits of concrete fifty percent of the recommended dosage of Perma Plast PC – 101 can be added at the batching plant and the remaining fifty percent at site just before pouring.

DOSAGEField trials should be conducted to determine the optimum addition rates of Perma Plast PC – 101. However a dosage of 0.4 to 3 percent by weight of cement, depending upon type of concrete required, is recommended.

COMPOSITIONPerma Plast PC – 101 is based on hyper plasticizing Poly Carboxylic Ethers.

HEALTH AND SAFETYPerma Plast PC – 101 is not a health hazard or fire risk. Spillages should be washed immediately to avoid possibilities of slipping.

PACKINGPerma Plast PC – 101 is available in 25kg, 100kg and 200kg drum.

SHELE LIFEPerma Plast PC – 101 has a shelf life of 24 months if stored in manufacturer’s original drums. Perma Plast PC – 101 should be stored in place where temperature does not drop below + 5°C. If the product is frozen, thaw at + 30°C and agitate until completely reconstituted. Shake well before use.

Workability Retaining Admixture

 

A POLYCARBOXYLIC ETHER BASED HIGH RANGE PLASTICISING AND WORKABILITY RETENTION ADMIXTURE FOR HIGH QUALITY CONCRETE

 

DESCRIPTION

Perma Plast PC – 404 is based on hyper plasticising synthetic polymers. It may be dispensed at dosages varying between 0.5 to 2 percent by weight of cement depending upon type of concrete required.

 

PRIMARY USES

• Perma Plast PC – 404 is recommended in all high grade concrete which has a cement content of over 400 kg/m3.
• Perma Plast PC – 404 help to control of bleed resulting from poor grading of fine aggregate in the concrete mix.
• Perma Plast PC – 404 is of use in hot weather concreting and in concreting works in areas lying high temperature zones.
• Perma Plast PC – 404 is recommended in hot weather concreting where workability retention over long periods is required.
• Perma Plast PC – 404 is recommended in marine structures, pile foundations, bridge girders, caissons, high rise structures and such structures where quality of concrete is of prime importance.
• Perma Plast PC – 404 is also recommended where very high initial and ultimate strengths are expected.

 

ADVANTAGES

• Hyper plasticizing action of this product produces free flowing concrete with most kinds of aggregates and varying fine aggregates.
• Perma Plast PC – 404 maintains the workability over long periods.
• Perma Plast PC – 404 helps in production of high quality concrete which exhibits superior compressive, tensile and flexural strengths and exhibits excellent resistance to chloride and sulphide attacks on concrete.
• Perma Plast PC – 404 is compatible with all types of cements including pozzolanic and fly ash / slag cements.
• Perma Plast PC – 404 is specially suggested in all high strength concrete and in construction of marine structures, pile foundations and bridge girders.
• Perma Plast PC 404 enables production of dense impermeable and fair finish concrete.
• Perma Plast PC – 404 helps to control segregation and bleed in concrete resulting from poor fine aggregate grading.

 

DIRECTIONS FOR USE

Perma Plast PC – 404 should be added to the mix along with water. Addition of plasticizers to the dry mix or dry cement should be avoided. During long transits of concrete fifty percent of the recommended dosage of Perma Plast PC – 404 can be added at the batching plant and the remaining fifty percent at site just before pouring.

 

COMPOSTION

Perma Plast PC – 404 is based on hyper plasticizing poly carboxylic ether polymers.

 

PACKING

Perma Plast PC – 404 is available in 25 kg, 100 kg and 200 kg HDPE drum.

 

SHELF LIFE

Perma Plast PC 404 has a shelf life of 12 months from the date of manufacturers original drums. Perma Plast PC – 404 should be stored in a place where temperature does not drop below + 5°C. If the product is frozen, thaw at+ 30°C and agitate until completely reconstituted. Shake well before use.

Perma Plast PC-405

 

A POLYCARBOXYLIC ETHER BASED HIGH RANGE PLASTICISING AND WORKABILITY RETENTION ADMIXTURE FOR HIGH QUALITY CONCRETE.

 

DESCRIPTION

Perma Plast PC – 405 is based on hyper plasticising synthetic polymers. It may be dispensed at dosages varying between 0.5 to 2 percent by weight of cement depending upon type of concrete required.

 

PRIMARY USES

• Perma Plast PC – 405 is recommended in all high grade concrete which has a cement content of over 400 kg/m3.
• Perma Plast PC – 405 help to control of bleed resulting from poor grading of fine aggregate in the concrete mix.
• Perma Plast PC – 405 is of use in hot weather concreting and in concreting works in areas lying high temperature zones.
• Perma Plast PC – 405 is recommended in hot weather concreting where workability retention over long periods is required.
• Perma Plast PC – 405 is recommended in marine structures, pile foundations, bridge girders, caissons, high rise structures and such structures where quality of concrete is of prime importance.
• Perma Plast PC – 405 is also recommended where very high initial and ultimate strengths are expected.

 

ADVANTAGES

• Hyper plasticizing action of this product produces free flowing concrete with most kinds of aggregates and varying fine aggregates.
• Perma Plast PC – 405 maintains the workability over long periods.
• Perma Plast PC – 405 helps in production of high quality concrete which exhibits superior compressive, tensile and flexural strengths and exhibits excellent resistance to chloride and sulphide attacks on concrete.
• Perma Plast PC – 405 is compatible with all types of cements including pozzolanic and fly ash / slag cements.
• Perma Plast PC – 405 is specially suggested in all high strength concrete and in construction of marine structures, pile foundations and bridge girders.
• Perma Plast PC 405 enables production of dense impermeable and fair finish concrete.
• Perma Plast PC – 405 helps to control segregation and bleed in concrete resulting from poor fine aggregate grading.

 

PACKING

Perma Plast PC – 405 is available in 25 kg, 100 kg and 200 kg HDPE drum.

Perma Plast Super 280 B

 

A HIGH RANGE, LOW DOSAGE, SUPER PLASTICISING ADMIXTURE FOR SLUMP RETENTION

 

DESCRIPTION

Perma Plast Super 280 B  is a high range, low dosage, super plasticising admixture for slump retention. It is a product based on refined naphthalene formaldehyde and ligno sulfonate blends.

 

PRIMARY USES

To produce self-compacting flowing concrete. To produce high early strength concrete for delayed slump retention and for long overhauls. Ideally suited for commercial RMC plants and concrete made with crushed sand.

 

TYPICAL APPLICATIONS

For the production of high workability concrete where heavily congested reinforcement exist or poor access is available. To produce flowing self Compacting concrete which requires minimal labour to place. For the production of high strength, high workability concrete. Particularly beneficial in hot climatic conditions and in ready mix concrete. It is based on naphthalene formaldehyde blends.

 

ACTION

Perma Plast Super 280 B  dramatically increases the workability of concrete mixes by its powerful deflocculating and dispersing effect on the cement particles. This increase in workability can be utilized to produce high workability concrete or to enable significant reductions in free water content.

 

PACKING

Perma Plast Super 280 B  is available in 30 kg, 120 Kg & 250 Kg HDPE Drum.

Perma Rheo Plast 220

 

A HIGH RANGE, LOW DOSAGE, SUPER PLASTICISING ADMIXTURE FOR SLUMP RETENTION

 

DESCRIPTION

Perma Rheo Plast -220 is a high range, low dosage, super plasticising admixture for slump retention. It is a product based on refined naphthalene formaldehyde and copolymers.

 

PRIMARY USES

To produce self- compacting flowing concrete. To produce high early strength concrete for delayed slump retention and for long over hauls. Ideally suited for commercial RMC plants and concrete made with crushed sand.

 

TYPICAL APPLICATIONS

For the production of high workability concrete where heavily congested reinforcement exist, or poor access is available. To produce flowing self compacting concrete which requires minimal labour to place. For the production of high strength, high workability concrete. Particularly beneficial in hot climatic conditions and in ready mix concrete.

 

ACTION

Perma Rheo Plast – 220 dramatically increases the workability of concrete mixes by its power ful deflocculating and dispersing effect on the cement particles. This increase in workability can be utilized to produce high workability concrete or to enable significant reductions in free water content.

 

DOSAGE

Field trials should be conducted to determine the optimum addition rates of Perma Rheo Plast – 220. However a dosage of 300 gms of 700 gms is recommended per 50 kg bag of cement depending upon requirements.

 

PACKING

Perma Rheo Plast -220 is available in 30 kg, 120 Kg & 250 kg HDPE Drum.

 

SHELF LIFE

24 months from the date of manufacturing if stored in a cool and dry place in original packing.

Polycarboxylic Ether Based Superplasticizers

HIGH RANGE HYPER PLASTICISING AND SLUMP RETENTION ADMIXTURE BASED ON POLYCARBOXYLIC ETHER

SPECIFICATIONComplying to: A.S.T.M. C494: Type A.F. and G IS -9103-2007.

DESCRIPTIONPerma Plast PC – 304 is based on Polycarboxylic ether and synthetic polymers. It may be dispensed at dosages varying between to 0.6 to 2 percent by weight of cement depending upon type of concrete required.

PRIMARY USES

• Perma Plast PC – 304 is recommended in all high grade concrete which has a cement. content of over 375 kg/m3.
• Perma Plast PC – 304 is recommended in hot weather concreting where workability retention over long periods is required.
• Perma Plast PC – 304 is recommended in marine structures, pile foundations, bridge girders, caissons and such structures where quality of concrete is of prime importance.
• Perma Plast PC – 304 is also recommended where very high initial and ultimate strengths are expected.
• Perma Plast PC – 304 is also recommended for use with Microsilica.
• Perma Plast PC – 304 is recommended in hot weather concreting.

ADVANTAGES

• Ne aggregates.owing concrete, with most kinds of aggregates and varying  Hyper plasticizing action of this product produces free
• Perma Plast PC – 304 maintains the workability over long periods.
• exural strengths and exhibits excellent resistance to chloride and sulphide attacks on concrete. Perma Plast PC – 304 helps in production of high quality concrete which exhibits superior compressive, tensile and
• y ash / slag cements and Microsillica. Perma Plast PC – 304 is compatible with all types of cements including puzzalonic,
• Perma Plast PC – 304 is specially suggested in all high strength concrete and in construction of marine structures, pile foundations and bridge girders.
• nish concrete. Perma Plast PC – 304 enables production of dense impermeable and fair
• Perma Plast PC – 304 enables concreting during hot weather and in the areas lying in high temperature zones.

COMPOSITIONPerma Plast PC – 304 is based on Poly Carboxylic ether and hyper plasticising synthetic polymers carefully selected to give superior initial and ultimate results.

HEALTH AND SAFETYre risk. Spillages should be washed immediately to avoid possibilities of slipping.ï��Perma Plast PC – 304 is not a health hazard or

PACKINGPerma Plast PC – 304 is available in 25 kg, 100 kg, 200 kg HDPE drum.

SHELF LIFEPerma Plast PC – 304 has a shelf life of 12 months if stored in manufacturer’s original packing in a cool and dry place away from moisture and heat.

Admixtures in concrete are very important. They offer high compressive strength, workability, durability, wear resistance, watertight and great finish in the construction of modern structures. These are the manufactured chemical that is added to the concrete before the mixing or sometimes during mixing. It is extremely beneficial and you should use this to build successful projects.

We at Perma Construction Aids Pvt. Ltd. you will get the best quality products in admixtures for concrete. We are the best admixtures for concrete manufacturer and supplier. Based in Sarigam, Gujarat our company supplies product all around the world including Sri Lanka, Maldives, Bangladesh and Nepal.

Our products are loved by all and we stand as the best admixtures for concrete suppliers.

High performance concrete admixtures are added to the mixture of cement and water in a small amount to increase the durability of the mixture so that the construction lasts for long. To fix the concrete behaviour and also to control hardening and setting, this product is used by several constructors from all around the country and even in other countries like Sri Lanka, the Maldives and many more from our company because we are the best Concrete Admixture Suppliers.

At Perma Construction Aids Pvt. Ltd. you will get the best quality products. We are the leading concrete admixture manufacturer producing goods that are advanced and superior to other products in the market.

We are popular concrete admixture exporters Gujarat, India. Contact us and get our products.

We are offering Admixtures Perma Plast Super. Perma Plast Super - 330 is a high range, low dosage, super plastering admixture for slump retention. It is a protect based on refined Naphthalene formal dehydeblends. Primary Uses : To produce self-compacting flowing concrete. To produce high early strength concrete for delayed slump retention and for long over hauls, ideally suited for commercial RMC plants. Packing : Perma Plast Super - 330 is available in 120 kg & 250 kg.

Perma Plast Super - 330 is a high range, low dosage, super plastering admixture for slump retention. It is a protect based on refined Naphthalene formal dehydeblends. Primary Uses :To produce self-compacting flowing concrete. To produce high early strength concrete for delayed slump retention and for long over hauls, ideally suited for commercial RMC plants. Packing : Perma Plast Super - 330 is available in 120 kg & 250 kg

Primary Uses : To produce self-compacting flowing concrete. To produce high early strength concrete for delayed slump retention & for long over hauls. Advantages :

• Increased workability-A concrete with a slump of 50 to 100 mm can be turned into self compacting, flowing concrete that requires little or no vibration, with the simple addition of Perma Plast Super
• High strength mixes - Due to reduction in water content higher grade concrete can be produced at normal work abilities and cement contents
• Improved Compaction - Concrete can be placed and compacted more quickly and easily when Perma Plast-Super is incorporated to the mix
• Superior Finish - Surface finish is improved, sand runs and blemishes are reduced
• Durable concrete- Enables production of economical, dense and more permeable concrete

Packing : Perma Plast Super is available in 30 kg, 120 kg & 240 kg drum.

Primary Uses :To produce self-compacting flowing concrete. To produce high early strength concrete for delayed slump retention & for long over hauls. Advantages :

• Increased workability-A concrete with a slump of 50 to 100 mm can be turned into self compacting, flowing concrete that requires little or no vibration, with the simple addition of Perma Plast Super
• High strength mixes - Due to reduction in water content higher grade concrete can be produced at normal work abilities and cement contents
• Improved Compaction - Concrete can be placed and compacted more quickly and easily when Perma Plast-Super is incorporated to the mix
• Superior Finish - Surface finish is improved, sand runs and blemishes are reduced
• Durable concrete- Enables production of economical, dense and more permeable concrete

Packing : Perma Plast Super is available in 30 kg, 120 kg & 240 kg drum

Perma Plast Super PS 34 is a multicomponent liquid admixture based on high molecular weight polymers and napthalene formaldehyde. The Perma Plast Super PS 34 is used to produce self-compacting flowing concrete and to produce high early strength concrete. We manufacture, export and supply the best quality Perma Plast Super PS 34 to our esteemed clients across the world. We provide Perma Plast Super PS 34 at the most reasonable prices. Primary Usage :

• For the production of high workability concrete where heavily congested reinforcements exist, or poor access is available.
• To produce flowing self compacting concrete which requires minimal labor to place
• For the production of high strength, high workability concrete
• Particularly beneficial in hot climatic conditions

Dosage : Field trials should be carried out with the given cement and aggregates to arrive at optimum dosages for the desired property to be achieved. However for guidance we specify a range of 0.5 to 1.5 percent by weight of cement for initiating trials based on type of concrete required. Packing : Perma Plast-super � PS34 is available in 25 kgs and 110 kgs drum.

We bring for high quality admixture for concrete which used in different construction application. We use high quality raw material for manufacturing of admixture for concrete. We have varios admixtures likeLiquid Concrete Additives Admixture , Construction Concrete Admixture , Cement Concrete Hardener , Liquid Cement Tiles Hardener , Concrete Cement Admixture , Integral Waterproofing Liquid, Waterproof Coatings Admixture , Paver Block Silicon Chemical Hardener, Construction Chemical Admixture , Cement Brick Liquid Admixture , Air Entraining Concrete Admixture , Construction Chemicals Admixture , Concrete Tile Hardener & Waterproofing Admixture

Perma Plast Clear QS is primarily used in the fast setting of the mortars and concretes. We are the renowned Manufacturer, Exporter and Supplier of the excellent quality Perma Plast Clear QS in the global market. The Perma Plast Clear QS that we provide is manufactured by using the high-grade materials and highly appreciated for its efficiency and performance. We make avail this Perma Plast Clear QS at very economical price. Primary Use :

• In fast setting concretes and mortars
• Concreting of pre-cast elements
• Concreting and rendering in very low temperatures
• In reducing rebound losses in sprayed mortar
• To waterproof plaster and concrete

Direction for use : In case of shot-creting/guniting, perma plast clear QS is mixed in the gauging water in the required proportion before addition to the dry mix. Hence it can be successfully used in both dry and wet shot-creting processes. In concrete and mortars for precasting elements. Perma Plast Clear QS is dosed through a separate dosing tank fitted above the mixer. It can be dosed manually as well after addition of required water. Advantages :

• Rebound losses in plastering mortar shot â�� creting and guniting are minimized. Saving on material, labor and machine time.
• Perma Plast Clear QS is liquid in form, hence easy to use.
• The plasticizing action of Perma Plast Clear QS helps in complete hydration of cement there by achieving superior strength.
• Wastage due to breaking in pre-cast elements is reduced savings on production cost.
• Perma Plast Clear QS can be used with all types of cements.
• To water proof plaster and concrete.

Dosage : Required dosage of Perma Plast Clear QS has to be arrived at site by practical trials. The dosage is dependent on temperature conditions, type of cement, type of acceleration required. We however recommend dosages of 1 to 10 percent by weight of cement. Lower dosages are however used in precast elements and higher dosages are used in shotcreting. For waterproofing the minimum dosage of the product shall be 250 gms/50kg bag of cement.

Perma Plast Super – 223

 

A HIGH RANGE, LOW DOSAGE SELF COMPACTING SUPER PLASTICISING ADMIXTURE

 

 DESCRIPTION

Perma Plast Super-223 is a multi component liquid admixture based on high molecular weight polymers and napthalene formaldehyde to produce self-compacting flowing concrete and to produce high early strength concrete.

 

PRIMARY USES

For the production of high workability concrete where heavily congested reinforcements exist or poor access is available. To produce flowing self compacting concrete which requires minimal labour to place. For the production of high strength, high workability concrete. Particularly beneficially in hot climatic conditions.

 

DIRECTIONS FOR USE

Perma Plast Super-223 should be added to the mix during the cycle at the same time as water or aggregates. Never add Perma Plast Super-223 to dry cement.

 

 DOSAGE

Field trials should be carried out with the given cement and aggregates to arrive at optimum dosages for the desired property to be achieved. However for guidance we specify a range of 0.4 to 1.5 percent by weight of cement for initiating trials based on type of concrete required.

 

PACKING

Perma Plast Super-223 is available in 30 kg, 120 kg and 250 kg drum.

 

SHELF LIFE

Perma Plast Super-223 has a shelf life of 24 months from the date of manufacture if stored in a cool, dry place in original packing.

Perma Plast PC - 302 is based on Polycarboxylic ether and synthetic polymers, it may be dispensed at dosages varying between 0.6 to 2 percent by weight of cement depending upon type of concrete required. Primary Uses :

• Perma Plast PC - 302 is recommended in all high grade concrete which has a cement content of over 375 kgs./m3
• Perma Plast PC - 302 is recommended in hot weather concreting where workability retention over long periods are required
• Perma Plast PC - 302 is recommended in marine structures, pile foundations, bridge girders, caissons and such structures where quality of concrete is of prime importance
• Perma Plast PC - 302 is also recommended where very high initial and ultimate strengths are expected
• Perma Plast PC - 302 is also recommended for use with Micro silica

Advantages :

• Hyper plasticising action of this product produces free flowing concrete, with most kinds of aggregates and varying fine aggregates
• Perma Plast PC - 302 maintains the workability overlong periods
• Perma Plast PC - 302 helps in production of high quality concrete which exhibits superior, compressive, tensile and flexural strengths and exhibits excellent resistance to chloride and sulphide attacks on concrete
• Perma Plast PC - 302 is compatible with all types of cements including puzzonic, fly ash/slag cements and Micro silica
• Perma Plast PC - 302 is specially suggested in all high strength concrete and in construction of marine structure, pile foundations and bridge girders
• Perma Plast PC - 302 enables production of dense impermeable and fair finish concrete

Packing : Perma Plast PC - 302 is available in 30 kg. And 250 kgs drum

Super Admixture For Plasticising

 

A HIGH RANGE, LOW DOSAGE, SUPER PLASTICISING ADMIXTURE FOR SLUMP RETENTION

 

SPECIFICATION

Complying to A.S.T.M C494 Type A, F & G. IS 9103-2007

 

DESCRIPTION

Perma Plast Super -210 is a high range, low dosage, super plasticizing admixture for slump retention. It is a product based on refined naphthalene formaldehyde.

 

PRIMARY USES

To produce self- compacting flowing concrete. To produce high early strength concrete for delayed slump retention and for long over hauls. Ideally suited for commercial RMC plants and concrete made with crushed sand.

 

TYPICAL APPLICATIONS

For the production of high workability concrete where heavily congested reinforcements exist or poor access is available. To produce flowing self compacting concrete which requires minimal labour to place. For the production of high strength, high workability concrete. Particularly beneficial in hot climatic conditions and in ready mix concrete.

 

ACTION

Perma Plast Super- 210 dramatically increases the workability of concrete mixes by its powerful deflocculating and dispersing effect on the cement particles. This increase in workability can be utilized to produce high workability concrete or to enable significant reductions in free water content.

 

DOSAGE

Field trials should be conducted to determine the optimum addition rates of Perma Plast Super- 210. However a dosage of 300 gms to 700 gms is recommended per 50 kg bag of cement depending upon requirements.

 

PACKING

Perma Plast Super -210 is available in 30 kg, 120 Kg & 250 kg HDPE Drum.

 

SHELF LIFE

Perma Plast Super -210 has a shelf life of 24 months from the date of manufacturing if stored in a cool and dry place in original packing.

High Range Hyper Plasticising Superior Quality Admixture for High Quality ConcretePerma Plast Super – 220 C is based on hyper plasticising sulphonated synthetic polymers. It may be dispensed at dosages varying between 0.5 to 2 percent by weight of cement depending upon type of concrete required.

Primary Uses

• Perma Plast Super – 220 C is recommended in all high grades concrete.
• Perma Plast Super – 220 C is recommended in hot weather concreting where workability retention over long periods is required.
• Perma Plast Super – 220 C is recommended in marine structures, pile foundations, bridge girders, caissons and such structures where quality of concrete is of prime importance.
• Perma Plast Super – 220 C is also recommended where very high initial and ultimate strengths are expected.

Advantages

• Hyper plasticising action of this product produces owing concrete, with most kinds of aggregates and varying fine aggregates
• Perma Plast Super – 220 C maintains the workability over long periods.
• Perma Plast Super – 220 C helps in production of high quality concrete which exhibits superior compressive, tensile and flexural strengths and exhibits excellent resistance to chloride and sulphide attacks on concrete.
• Perma Plast Super – 220 C is compatible with all types of cements including pozzolanic and fly ash / slag cements.
• Perma Plast Super – 220 C is specially suggested in all high strength concrete and in construction of marine structures, pile foundations and bridge girders.
• Perma Plast Super – 220 C enables production of dense impermeable and fair finish concrete.ï��

Packing

• Perma Plast Super – 220 C is available in 30 kg and 250 kg drum.

High range hyper plasticising superior quality admixture for high quality concrete.

 

DESCRIPTION : Perma Plast PC 220 C is based on hyper plasticising sulphonated synthetic polymers. It may be dispensed at dosages varying between 0.5 to 2 percent by weight of cement depending upon type of concrete required.

 

PRIMARY USES

• Perma Plast PC 220 C is recommended in all high grades concrete.

• Perma Plast PC 220 C is recommended in hot weather concreting where workability retention over long periods is required.

• Perma Plast PC 220 C is recommended in marine structures, pile foundations, bridge girders, caissons and such structures where quality of concrete is of prime importance.

• Perma Plast PC 220 C is also recommended where very high initial and ultimate strengths are expected.

 

ADVANTAGES

• Hyper plasticising action of this product produces flowing concrete, with most kinds of aggregates and varying fine aggregates.

• Perma Plast PC 220 C maintains the workability over long periods.

• Perma Plast PC 220 C helps in production of high quality concrete which exhibits superior compressive, tensile and flexural strengths and exhibits excellent resistance to chloride and sulphide attacks on concrete.

• Perma Plast PC 220 C is compatible with all types of cements including pozzolanic and fly ash / slag cements.

• Perma Plast PC 220 C is specially suggested in all high strength concrete and in construction of marine structures, pile foundations and bridge girders.

• Perma Plast PC 220 C enables production of dense impermeable and fair finish concrete.

 

DIRECTIONS FOR USE : Perma Plast PC 220 C should be added to the mix along with water. Addition of plasticisers to the dry mix or dry cement should be avoided. During long transits of concrete fifty percent of the recommended dosage of Perma Plast PC 220 C can be added at the batching plant and the remaining fifty percent at site just before pouring.

 

PACKING : Perma Plast PC 220 C is available in 30 kg and 250 kg drum.

Perma Plast PC - 502 is a superior quality super plasticiser cum very high range water reducer based on high molecular weight polycarboxylic copolymers. Primary Uses :

• To produce free flowing and self compacting concrete
• To increase the compressive strengths of the concretes and mortars to highest possible limits
• To bring down the water cement ratios to bare minimum
• To achieved early high strengths
• To achieve prolonged workability

Advantages :

• Perma Plast PC - 502 is a light colored liquid hence does not change the colour of concrete
• Perma Plast PC - 502 is highly useful in pre-cast units
• Perma Plast PC - 502 is of special advantage in concreting RCC members with congested reinforcements
• Perma Plast PC - 502 is very easy to dose. The dosing quantity of the material can be added to the concrete or mortar mix at any stage of mixing

Packing : Perma Plast PC - 502 is supplied in 30 kg. 100 kg packs

Waterproofing admixtures are used to prevent concrete from the penetration of water. It is seen that concrete absorbs water and these makes them weak and eventually, the surface starts falling off exposing the rods and other inside structures. This can lead to heavy repairing costs and your building will eventually lose its strength. The main reason to use this product is to make your structure hydrophobic.

If you want to make your structure strong and durable and want to keep it away from the damage that can be caused by the water, contact the best waterproofing admixtures manufacturer, Perma Construction Aids Pvt. Ltd. Our products are loved by all because of the quality and texture. We use only tested raw materials that are approved by the experts. For us clients satisfaction is important and we understand that to satisfy our clients, we cannot comprise with the quality.

Therefore contact us and get our products as we are the leading waterproofing admixtures suppliers, Gujarat, India.

Perma Hyper Plast HP - 34 is based on hyper plasticizing sulphonated synthetic polymers. It may be dispensed at dosages varying between 1 to 2 percent by weight of cement depending upon type of concrete required. Primary Uses :

• Perma Hyper Plast HP - 34 is recommended in all high grade concrete which has a cement content of over 375 kgs per m3
• Perma Hyper Plast HP - 34 is recommended in hot weather concreting where work ability retention over long periods are required
• Perma Hyper Plast HP - 34 is recommended in marine structures, pile foundations bridge girders, caissons and such structures where quality of concrete is of prime importance
• Perma Hyper Plast HP - 34 is also recommended where very high initial and ultimate strengths are expected
• Perma Hyper Plast HP - 34 is also recommended for use with Micro silica

Advantages :

• Hyper plasticizing action of this product produces free flowing concrete, with most kinds of aggregates and varying fine aggregates
• Perma Hyper Plast HP - 34 maintains the workability over long periods
• Perma Hyper Plast HP - 34 helps in production of high quality concrete which exhibits superior compressive, tensile and flexural strengths and exhibits excellent resistance to chloride and sulpide attacks on concrete
• Perma Hyper Plast HP - 34 is compatible with all types of cements including puzzolonic, fly ash/slag cements including puzzolonic, fly ash/slag cements and Micro silica
• Perma Hyper Plast HP - 34 plast is specially suggested in all high strength concrete and in construction of marine structures, pile foundations and bridge girders
• Perma Hyper Plast HP - 34 enables production of dense impermeable and fair finish concrete

Packing :Perma Hyper Plast HP - 34 is available in 25 kgs, and 250 kgs. drum

Air Entraining Admixtire Perma Plast AEA is a high performance, chloride-free water reducing cum air entraining agent for mortars, concrete and lightweight aggregate mixes. The introduction of Perma Plast AEA brings about entrainment of innumerable microscopic air bubbles of suitable size and spacing evenly distributed throughout the matrix. Perma Plast AEA lowers the surface tension of the mixing water. As a result, there is considerable reduction in the amount of mixing water required. The plasticizing nature of air entrainment assists in producing a dense, uniform close textured surface free gravel nests and honey combing. Perma Plast AEA that we manufacture, export and supply is compatible with all types of cements, sands and avoids Efflorescence and bleed in concrete. Advanteges :

• It improves work ability thus Improving .
• Reduces water cement ratio thereby Increasing strength.
• Increases resistance of mortars to attack by deicing salts and freeze and thaw cycles .
• The concrete produced with PernaPlast AEA Is homogeneous and freefrom bleeding.
• Air entrainmentof microscopic bubbles assists In producing cohesive concrete freefrom bleed which reduces segregation.

Poly Carboxylic Ethers Admixture

HIGH RANGE HYPER PLASTICISING SUPERIOR QUALITY ADMIXTURE FOR HIGH QUALITY CONCRETE BASED ON POLY CARBOXYLIC ETHERS

DESCRIPTIONPerma Plast PC – 101 is based on hyper plasticising Poly Carboxylic Ethers. It may be dispensed at dosages varying between 0.4 to 3 percent by weight of cement depending upon type of concrete required.

PRIMARY USES

• Perma Plast PC – 101 is recommended in all high grade concrete which has a cement content of over 350 kg/m3.
• Perma Plast PC – 101 is recommended in hot weather concreting where workability retention over long periods is required.
• Perma Plast PC – 101 is recommended in pile foundations, bridge girders, caissons, high rise structures and such structures where quality of concrete is of prime importance.
• Perma Plast PC – 101 is also recommended where very high initial and ultimate strengths are expected.

ADVANTAGES

• Hyper plasticizing action of this product produces free flowing concrete, with most kinds of aggregates and varying fine aggregates.
• Perma Plast PC – 101 maintains the workability over long periods.
• Perma Plast PC – 101 helps in production of high quality concrete which exhibits superior compressive, tensile and flexural strengths and exhibits excellent resistance to chloride and sulphide attacks on concrete.
• Perma Plast PC – 101 is compatible with all types of cements including pozzolanic and fly ash / slag cements.
• Perma Plast PC – 101 is specially suggested in all high strength concrete and in construction of marine structures, pile foundations and bridge girders.
• Perma Plast PC – 101 enables production of dense impermeable and fair finish concrete.

DIRECTIONS FOR USEPerma Plast PC – 101 should be added to the mix along with water. Addition of plasticizers to the dry mix or dry cement should be avoided. During long transits of concrete fifty percent of the recommended dosage of Perma Plast PC – 101 can be added at the batching plant and the remaining fifty percent at site just before pouring.

DOSAGEField trials should be conducted to determine the optimum addition rates of Perma Plast PC – 101. However a dosage of 0.4 to 3 percent by weight of cement, depending upon type of concrete required, is recommended.

COMPOSITIONPerma Plast PC – 101 is based on hyper plasticizing Poly Carboxylic Ethers.

HEALTH AND SAFETYPerma Plast PC – 101 is not a health hazard or fire risk. Spillages should be washed immediately to avoid possibilities of slipping.

PACKINGPerma Plast PC – 101 is available in 25kg, 100kg and 200kg drum.

SHELE LIFEPerma Plast PC – 101 has a shelf life of 24 months if stored in manufacturer’s original drums. Perma Plast PC – 101 should be stored in place where temperature does not drop below + 5°C. If the product is frozen, thaw at + 30°C and agitate until completely reconstituted. Shake well before use.

Perma Plast PC- 600             

 

HIGH RANGE POLY CARBOXYLIC ETHER BASED ADMIXTURE FOR HYPERPLASTICIXING AND GOOD SLUMP RETENTION IN CONCRETE. 

 

DESCRIPTION

Perma Plast PC – 600 is based on hyper plasticising poly carboxylic ether. It may be dispensed at dosages varying between 0.5 to 2 percent by weight of cement depending upon type of concrete required.

 

PRIMARY USES

• Perma Plast PC – 600 is recommended in all high grade concrete which has a cement content of over 400 kg/m3.
• Perma Plast PC – 600 is recommended in hot weather concreting where workability retention over long periods is required.
• Perma Plast PC – 600 is recommended in marine structures, pile foundations; bridge girders, caissons, high rise structures and such structures where quality of concrete is of prime importance.
• Perma Plast PC – 600 is also recommended where very high initial and ultimate strengths are expected.

 

ADVANTAGES

• Hyper plasticizing action of this product produces free flowing concrete with most kinds of aggregates and varying fine aggregates.
• Perma Plast PC – 600 maintains the workability over long periods.
• Perma Plast PC – 600 helps in production of high quality concrete which exhibits superior compressive, tensile and flexural strengths and exhibits excellent resistance to chloride and sulphide attacks on concrete.
• Perma Plast PC – 600 is compatible with all types of cements including pozzolanic and fly ash / slag cements.
• Perma Plast PC – 600 is specially suggested in all high strength concrete and in construction of marine structures, pile foundations and bridge girders.
• Perma Plast PC -600 enables production of dense impermeable and fair finish concrete.

 

PACKING :

Perma Plast PC – 600 is available in 200 kg Drum.

PERMA PLAST PC-200        

PLASTICISING AND SLUMP RETENTION ADMIXTURE FOR CONCRETING IN TEMPERATE ZONE

DESCRIPTIONPerma Plast PC -200 is a medium range plasticizing and slum retaining admixture of use in temperate zones where workability retention is important on concreting sites. Perma Plast PC -200 is recommended in all general concreting.

PRIMARY USES

• Perma Plast PC -200  is   recommended  in all general concreting in elevated temperatures and in areas slump retention is desired.  
• Perma Plast PC -200 is recommended in hot weather concreting where workability retention over long  periods are required.
• Perma Plast PC -200 is recommended in pile foundations, bridge girders, caissons high rise structures and such structures where quality of concrete is of prime importance.

ADVANTAGES

• Perma Plast PC-200 is suitable for use with all types aggregates and cements.
• Perma Plast PC-200 maintains the workability over long periods.
• Perma Plast PC-200 helps in production of good quality of concrete continuously.
• Perma Plast PC -200 is compatible with all types of cements including puzzolonic and fly ash / slag cements.
• Perma Plast PC-200 is specially suggested in all high strength concrete and in construction of marine structures, pile foundations and bridge girders.
• Perma Plast PC-200 enables production of dense impermeable and fair finish concrete.

DIRECTIONS FOR USEPerma Plast PC -200 should be added to the mix along with water. Addition of plasticizers to the dry mix or dry cement should be avoided. During long transits of concrete fifty percent of the recommended dosage of Perma Plast PC-200 can be added at the batching plant and the remaining fifty percent at site just before pouring.

PACKING Perma Plast PC-200 is available in 25kg, 100Kg and 200 Kg drum.

PERMA PLAST PC-300        

SUPER PLASTICISING AND SLUMP RETENTION ADMIXTURE FOR CONCRETING IN TEMPERATE ZONE

DESCRIPTIONPerma Plast PC -300 is a high range plasticizing and slum retaining admixture of use in temperate zones where workability retention is important on concreting sites. Perma Plast PC -300 is recommended in production of high strength concrete.

PRIMARY USES

• Perma Plast PC -300  is   recommended  in production of high strength concrete in elevated temperatures and in areas slump retention is desired.  
• Perma Plast PC -300 is recommended in hot weather concreting where workability retention over long  periods are required.
• Perma Plast PC -300 is recommended in pile foundations, bridge girders, caissons high rise structures and such structures where quality of concrete is of prime importance.

ADVANTAGES

• Perma Plast PC-300 is suitable for use with all types aggregates and cements and in all weathers.
• Perma Plast PC-300 maintains the workability over long periods.
• Perma Plast PC-300 helps in production of good quality of concrete continuously.
• Perma Plast PC -300 is compatible with all types of cements including puzzolonic and fly ash / slag cements.
• Perma Plast PC-300 is specially suggested in all high strength concrete and in construction of marine structures, pile foundations and bridge girders.
• Perma Plast PC-300 enables production of dense impermeable and fair finish concrete.

DIRECTIONS FOR USE

Perma Plast PC -300 should be added to the mix along with water. Addition of plasticizers to the dry mix or dry cement should be avoided. During long transits of concrete fifty percent of the recommended dosage of Perma Plast PC-300 can be added at the batching plant and the remaining fifty percent at site just before pouring.

PACKING Perma Plast PC-300 is available in 25kg, 100Kg and 200 Kg drum.

High Range Poly Carboxylic Ether Based Admixture for Hyperplasticixing and Good Slump Retention in ConcreteWeather Concreting Admixtures is based on hyper plasticising poly carboxylic ether. It may be dispensed at dosages varying between 0.5 to 2 percent by weight of cement depending upon type of concrete required.

Primary Uses

• Perma Plast PC – 401 C is recommended in all high grade concrete which has a cement content of over 400 kg/m3.
• Perma Plast PC – 401 C is recommended in hot weather concreting where workability retention over long periods is required.
• Perma Plast PC – 401 C is recommended in marine structures, pile foundations; bridge girders, caissons, high rise structures and such structures where quality of concrete is of prime importance.
• Perma Plast PC – 401 C is also recommended where very high initial and ultimate strengths are expected.

Advantages

• Hyper plasticizing action of this product produces free flowing concrete with most kinds of aggregates and varying fine aggregates.
• Perma Plast PC – 401 C maintains the workability over long periods.
• Perma Plast PC – 401 C helps in production of high quality concrete which exhibits superior compressive, tensile and flexural strengths and exhibits excellent resistance to chloride and sulphide attacks on concrete.
• Perma Plast PC – 401 C is compatible with all types of cements including pozzolanic and fly ash / slag cements.
• Perma Plast PC – 401 C is specially suggested in all high strength concrete and in construction of marine structures, pile foundations and bridge girders.
• Perma Plast PC -401 C enables production of dense impermeable and fair finish concrete.

Packing

• Perma Plast PC – 401 C is available in 200 kg Drum.

High range poly carboxylic ether based admixture for hyperplasticixing and good slump retention in concrete.

 

DESCRIPTION : Perma Plast PC – 401 C is based on hyper plasticising poly carboxylic ether. It may be dispensed at dosages varying between 0.5 to 2 percent by weight of cement depending upon type of concrete required.

 

PRIMARY USES

• Perma Plast PC – 401 C is recommended in all high grade concrete which has a cement content of over 400 kg/m3.
• Perma Plast PC – 401 C is recommended in hot weather concreting where workability retention over long periods is required.
• Perma Plast PC – 401 C is recommended in marine structures, pile foundations; bridge girders, caissons, high rise structures and such structures where quality of concrete is of prime importance.
• Perma Plast PC – 401 C is also recommended where very high initial and ultimate strengths are expected.

 

ADVANTAGES

• Hyper plasticizing action of this product produces free flowing concrete with most kinds of aggregates and varying fine aggregates.
• Perma Plast PC – 401 C maintains the workability over long periods.
• Perma Plast PC – 401 C helps in production of high quality concrete which exhibits superior compressive, tensile and flexural strengths and exhibits excellent resistance to chloride and sulphide attacks on concrete.
• Perma Plast PC – 401 C is compatible with all types of cements including pozzolanic and fly ash / slag cements.
• Perma Plast PC – 401 C is specially suggested in all high strength concrete and in construction of marine structures, pile foundations and bridge girders.
• Perma Plast PC -401 C enables production of dense impermeable and fair finish concrete.

Perma Rheo Plast - 210

A HIGH RANGE, LOW DOSAGE, SUPER PLASTICISING ADMIXTURE FOR SLUMP RETENTION

DESCRIPTIONPerma Rheo Plast -210 is a high range, low dosage, super plasticising admixture for slump retention. It is a product based on refined naphthalene formaldehyde.

PRIMARY USESTo produce self- compacting flowing concrete. To produce high early strength concrete for delayed slump retention and for long over hauls. Ideally suited for commercial RMC plants and concrete made with crushed sand.

TYPICAL APPLICATIONSFor the production of high workability concrete where heavily congested reinforcements exist or poor access is available. To produce flowing self compacting concrete which requires minimal labour to place. For the production of high strength, high workability concrete. Particularly beneficial in hot climatic conditions and in ready mix concrete.

ACTIONPerma Rheo Plast - 210 dramatically increases the workability of concrete mixes by its powerful deflocculating and dispersing effect on the cement particles. This increase in workability can be utilized to produce high workability concrete or to enable significant reductions in free water content.

DOSAGEField trials should be conducted to determine the optimum addition rates of Perma Rheo Plast 210. However a dosage of 300 gms of 700 gms is recommended per 50 kg bag of cement depending upon requirements.

PACKINGPerma Rheo Plast -210 is available in 30 kg, 120 Kg & 250 kg HDPE Drum.

SHELF LIFEPerma Rheo Plast -210 has a shelf life of 24 months from the date of manufacturing if stored in a cool and dry place in original packing.

Retarding Admixtures is a liquid admixture for concrete based on refined Ligno sulphonate sand Naphthalene formaldehyde blends. Retarding Admixtures helps in production of super plasticised and set retarded concrete to enable the delayed pouring of concrete after its production or to get over the problems arising during hot weather concreting. Primary Uses :To produce concrete with delayed Initial and final setting times. Advantages :Use of Retarding Admixtures in hot weather ensures continuous pours resulting in monolithic sound concrete. Improves ultimate strengths significantly. Helps saving in cements in rich mixes. Packing : 10 Ltr., 25 Ltr, 100 Ltr & 210 Liters drum

Concrete is an extensively used construction material all over the world in construction and its advantages are estimated to elevate further. The Admixture is a kind of a chemical which is added to the concrete whilst making modification and making it stronger. Although concrete is very strong substance itself, adding our Admixture in concrete makes it stronger, resilient, water-resistant and immune to the all kinds of weather conditions. Our superior quality admixture in concrete provides best results for whichever construction types.With substantial industry experience and understanding, we are one of the leading Concrete Admixture suppliers and manufacturers. Our comprehensive ranges of Concrete admixture products comprise Concrete Admixtures, Concrete Construction Chemicals, and Concrete Repairing Chemicals. These products are manufactured with the help of high quality components, under the expert supervision of our personnel. Our quality control team examines products to deliver only flawless products to our clients.

Perma Grout Admix

LIQUID POLYMER ADMIXTURE FOR TILE GROUTS AND TILE FIXING MORTARS

DESCRIPTIONPerma Grout Admix is a white liquid, based on special polymers, which enhances the performance of tile grouts and tile adhesives. In demanding situations and in critical applications when the performance of the conventional tile grout or the tile fixing adhesives and tile mortars are not measuring up to the performance criteria required in the given situation, then addition of Perma Grout Admix fills this gap by enhancing the performance of these products to the full satisfaction of the site requirement.

PRIMARY USESPerma Grout Admix is used in the tile grouts and to improve its flexibility, adhesion to the tile edges and to make it crack resistant. Perma Grout Admix enhances the color of the tile grout and makes it lustrous. Perma Grout Admix enhances the overall strength of the tile grout and makes it highly workable in the plastic state. In hardened state the tile grout becomes resistant to wear and tear and powdering.In tile adhesives and in tile mortars Perma Grout Admix improves the mechanical strength and improves adhesion characteristic, makes the mortars and adhesives more workable and improves wetting of the back of the tile.

GUIDE TO APPLICATIONMix Perma Grout Admix with water in the proportion of 1:1 and use this mixture in tile grouts and tile adhesives and tile mortars to get the desired consistency of application. All normal practices of tiling and tile joint grouting need to be followed as usual. Since the adhesive property of grout gets enhanced it is suggested that the cleaning of the tile of the spillages of the grout on tile may be done faster or alternatively use masking tape on the edges of the tile.

COVERAGEGenerally 10 kgs of powder ( whether Tile Adhesive or Tile Joint Filler ) requires 2 litres of liquid ( which is Tile Grout diluted with water in 1:1 proportion ) to make a workable paste. Hence one litre Perma Grout Admix is required for every 10 Kgs of Tile Adhesive or Tile Joint Filler. The coverage of the paste is governed by the TDS of those powders.

CAUTIONWhen Perma Grout Admix is used in Tile Grouts there will be an apparent gain / loss in the shade on the tile grout on the darker / lighter side. But when the grout dries it is expected to match the original shade. However it is advised that trials be conducted to ascertain the correct out come of the shade with the use of Perma Grout Admix and suitable shade of the Tile Joint Filler be selected to match the required end the result.

PACKINGPerma Grout Admix is supplied in 100 ml, 500 ml, 1 ltr, 5 ltr, 10 ltr & 20 ltr pack.

SHELF LIFEPerma Grout Admix can be stored in standard conditions for a period of 24 months from the date of manufacture.

DISCLAIMER

• PERMA warrants that all products are free from any defects of manufacture and comply with the specifications given in their respective technical data sheet. No warranty can be given as to the results of use because conditions of use, such as site conditions, surface preparations, workmanship, weather, structural issues and other factors are beyond the control of PERMA. Purchaser agrees to seek the advice of qualified professionals to carry out tests & take trials to determine the suitability of products for their intended purpose prior to full scale usage of PERMA products and assumes all risks.
• The company does not assume any liability for unsatisfactory results, arising from the use of our products. Purchaser’s sole liability is limited to replacement of product or refund of the purchase price paid if any product proven defective. No other warranties, express or implied, shall apply including any warranty of merchantability or fitness for a particular purpose.
• PERMA shall not be liable for any consequential damages arising from the use of our products for unsatisfactory results.
• The information supplied in this datasheet is based on our experience through extensive research and is given in good faith in order to help prospective users. We reserve the right to update the information provided in our technical data sheet at any time without prior notice within the scope of technical progress or new developments.

If you are looking for excellent quality waterproofing products, you are in the right place. Perma Construction Pvt. Ltd. has amazing quality waterproofing products that have gained worldwide appreciation. Based in Gujarat our company is known all over the world and especially in countries like Sri Lanka, Nepal, Bangladesh and many more.

Our company is known as the best waterproofing products suppliers today. All this is because of the excellent coordination among our team members which makes us able to deliver products always on time. We have never got late with our delivery which attracts a maximum number of customers today.

Thus, try out our services and products by ordering them online. Have faith and trust our company as we are reliable waterproofing products manufacturer and supplier.

We are a trustworthy name, involved in offering excellence in the form of Concrete Admixture. We are immensely recognized for delivering the orders within the stipulated time frame and at desired Mumbai(India).

Water is the vital resource for us but it is one of the biggest enemies of construction material which is why you should use waterproofing powder in your structures to keep them safe and secured. The water damage can go to an extreme level and can lead to building failure which is why using this powder from a popular and well-known company like Perma Construction Aids Pvt. Ltd is very important.

We are the leading waterproofing powder manufacturer and exporter and we simply perfect solutions and water repellents for your construction. Therefore visit our website and get our products in the required amount we will supply your our products on time.

Choosing us would be an excellent idea because with our extraordinary service and products we have become the topmost waterproofing powder supplier in Gujarat, India.

Waterproof Material for Waterproofing

We are a leading manufacturer and exporter of an extensive range of Crystalline Waterproofing to our Distinguished Clients. These products are manufactured by utilizing Perma Seal Powder acquired from trustworthy vendors in the market. Our range of Crystalline Waterproofing products is used in an assortment of applications such as arresting leakage from old as well as new leaky overhead and subversive water tanks. We offer these products to our clients at market leading rates.

Perma Rheoplast is based on hyper plasticising sulphonated synthetic Naphthalene polymers. It may dispensed at dosages varying between 0.3 to 2% by weight of cement depending upon type of concrete required. Primary Uses :

• Perma Rheoplast is recommended in all high grade concrete which has a cement content of over 375 kgs. Per m3
• Perma Rheoplast is recommended in hot weather concreting where workability retention over long periods are required
• Perma Rheoplast is recommended in marine structures, pile foundations, bridge girders, caissons and such structures where quality of concrete is of prime importance
• Perma Rheoplast is also recommended where very high initial and ultimate strengths are expected
• Perma Rheoplast is an ideal product to used in R.M.C plants

Advantages :

• Hyper Plasticising action of this product produces free flowing concrete, with most kinds of aggregates and varying fine aggregates
• Perma Rheoplast maintains the workability over long periods
• Perma Rheoplast helps in production of high quality concrete which exhibits superior compressive, tensile and flexural strengths and exhibits excellent resistance to chloride and sulphide attacks on concrete
• Perma Rheoplast is compatible with all types of cements including puzzolonic and fly ash/slag cement
• Perma Rheoplast is specially suggested in all high strength concrete and in construction of marine structures, pile foundations and bridge girders
• Perma Rheoplast enables production of dense impermeable and fair finish concrete

Packing : Perma Rheoplast is available in 25 kgs, 100 kgs and 240 kgs. HDPE drum packing

Perma Plast PC 202 is based on polycarboxylic ether and synthetic polymers. This Perma Plast PC 202 can be dispensed at dosages varying between 0.6 to 2 percent by weight of cement depending upon type of concrete required. We are the most trustworthy Manufacturer, Exporter and Supplier of the finest range of Perma Plast PC 202. Our range of Perma Plast PC 202 is very cost-effective. Primary Uses :

• Perma Plast PC 202 is recommended in all high grade concrete which has a cement content of over 375 kgs./m3.
• Perma Plast PC 202 is recommended in hot weather concreting where workability retention over long periods are required.
• Perma Plast PC 202 is recommended in marine structures, pile foundations, bridge, girders, caissons and such structures where quality of concrete is of prime importance.
• Perma Plast PC 202 is also recommended where very high initial and ultimate strengths are expected.
• Perma Plast PC 202 is also recommended for use with microsillica.

Packing : Perma Plast � PC 202 is available in 30 kg. And 250 kgs drum.

Perma Plast PC 401 is based on hyper plasticizing sulphonated synthetic polymers. The Perma Plast PC 401 may be dispensed at dosages varying between 0.5 to 2 percent by weight of cement depending upon type of concrete required. We are manufacturing, exporting and supplying the best quality Perma Plast PC 401 across the world. Our range of Perma Plast PC 401 can be availed at the most competitive price range. Primary Uses :

• Perma Plast PC 401 is recommended in all high grade concrete which has a cement content of over 400kg/m3.
• Perma Plast PC 401 is recommended in hot weather concreting where workability retention over long periods is required.
• Perma Plast PC 401 is recommended in marine structures, pile foundations, bridge girders, caissons high rise structures and such structures are expected.
• Perma Plast PC 401 is also recommended where very high initial and ultimate strengths are expected.

We are the known provider of Perma Plast Super 220 in the industry. Our Perma Plast Super 220 is a high range, low dosage, super plasticizing admixture for slump retention. This Perma Plast Super 220 is a product based on refined naphthalene formaldehyde and lignosulphonate blends. We manufacture, export and supply the finest quality Perma Plast Super 220 at the most economical price range. Primary Uses :

• To produce self â�� compacting flowing concrete
• To produce high early strength concrete for delayed slump retention and for long over hauls
• Ideally suited for commercial RMC plants and concrete made with crushed sand.

Dosage : Field trials should be conducted to determine the optimum addition rates of perma plast super � 220, however a dosage of 300 gms to 500 gms is recommended per 50 kg bag of cement. Packing : Perma Plast Super � 220 is available in 120 kg & 240 Kg HDPE drum.

Perma Plast Super – 230

 

HIGH RANGE HYPER PLASTICISING SUPERIOR QUALITY ADMIXTURE FOR HIGH QUALITY CONCRETE

 

DESCRIPTION

Perma Plast Super – 230 is based on hyper plasticising sulphonated synthetic polymers. It may be dispensed at dosages varying between 0.5 to 2 percent by weight of cement depending upon type of concrete required.

 

PRIMARY USES

• Perma Plast Super – 230 is recommended in all high grades concrete.
• Perma Plast Super – 230 is recommended in hot weather concreting where workability retention over long periods is required.
• Perma Plast Super – 230 is recommended in marine structures, pile foundations, bridge girders, caissons and such structures where quality of concrete is of prime importance.
• Perma Plast Super – 230 is also recommended where very high initial and ultimate strengths are expected.

 

ADVANTAGES

• ne aggregates.owing concrete, with most kinds of aggregates and varying Hyper plasticising action of this product produces 
• Perma Plast Super – 230 maintains the workability over long periods.
• exural strengths and exhibits excellent resistance to chloride and sulphide attacks on concrete.Perma Plast Super – 230 helps in production of high quality concrete which exhibits superior compressive, tensile and 
• Yash / slag cements.Perma Plast Super – 230 is compatible with all types of cements including pozzolanic and 
• Perma Plast Super – 230 is specially suggested in all high strength concrete and in construction of marine structures, pile foundations and bridge girders.
• Nish concrete.Perma Plast Super – 230 enables production of dense impermeable and fair 

 

PACKING

Perma Plast Super – 230 is available in 30 kg and 250 kg drum.

Perma Multi Plast is a unique admixture based on complex polymeric chemical structure which works wonderfully with all grades of concrete in all weather conditions. The Perma Multi Plast imparts high compressive tensile and flexural strength to the concrete. This Perma Multi Plast admixture is of immense use in making the concrete highly workable and in retaining the workability over long hours. We are known as the most trusted Perma Multi Plast Manufacturer, Exporter and Supplier in the market. Primary uses :

• Perma : Multi Plast is recommended in all type of concrete.
• Perma : Multi Plast is recommended in hot weather concreting where workability retention over long periods is required.
• Perma : Multi Plast is also recommended where very high initial and ultimate strengths are expected.

Advantages :

• Multi plasticizing action of this product produces free flowing concrete, with most kinds of aggregates and varying fine aggregates.
• Perma : Multi Plast maintains the workability over long periods.
• Perma : Multi Plast helps in production of high quality concrete which exhibits superior compressive, tensile and flexural strengths and exhibits excellent resistance to chloride and sulphide attacks on concrete
• Perma : Multi Plast is compatible with all types of cements including puzzolonic and fly ash / slag cements
• Perma : Multi Plast is specially suggested in all high strength concrete.
• Perma : Multi Plast enables production of dense impermeable and fair finish concrete

Direction for use : Mix the admixture with water in the given proportions and dose at the rate 0.5 % to 2% by weight of cement of the diluted material. The dosing of the admixture is done along with the dosing water in the mixture drum. Addition of admixture to the dry cement should be avoided. Should the need arise, to maintain the work ability over long hours an additional dosage of admixture can be added to the concrete before the effect of the previous dosage wears off. Typical Properties :

• Colour : Dark Brown Liquid
• Specific Gravity : 1.3 at 25^oC
• PH : 7.5
• Chlorides : Nil. Free from added chloride
• Nitrates : Nil. Free from added nitrates
• Sulphates : 0.5% w/w
• Freezing Point : + 5^oC Material can be reconstituted by agitation at 30^oC
• Usage : Dilution with water at recommended proportions

Dosage : 0.5% to 2% by weight of cement depending upon grade of concrete of the diluted material Health and Safety : Perma-Multi Plast is not a health hazard or fire risk. Spillages should be washed immediately to avoid possibilities of slipping. Packing : Perma � Multi Plast is available only in 30 kg drum. Bulk packing could be considered on special request. Shelf Life : Twelve months if stored in manufacturer's original drums. Perma � Multi Plast should be stored in a place where temperature doesnot drop below +5^oC. If the product is frozen, thaw at +30^oC and agitate until completely reconstituted. Shake well before use Qualtiy Assurance : All �PERMA� branded products are manufactured under strict quality control supervision as per exact manufacturing specifications. Should you find the behaviour of the product varying from the claims in the data sheets please stop the use of the product and contact Perma staff or Distributor. Statement of Presponsibility : Perma branded products when used in accordance with the current published directions for use, perform as per their data sheets / catalogues. The manufacturer and the Distributor will not be responsible for other materials and conditions of inferior workmanship.

Perma Plast PC – 101

HIGH RANGE HYPER PLASTICISING SUPERIOR QUALITY ADMIXTURE FOR HIGH QUALITY CONCRETE BASED ON POLY CARBOXYLIC ETHERS

DESCRIPTIONPerma Plast PC – 101 is based on hyper plasticising Poly Carboxylic Ethers. It may be dispensed at dosages varying between 0.4 to 3 percent by weight of cement depending upon type of concrete required.

PRIMARY USES

• Perma Plast PC – 101 is recommended in all high grade concrete which has a cement content of over 350 kg/m3.
• Perma Plast PC – 101 is recommended in hot weather concreting where workability retention over long periods is required.
• Perma Plast PC – 101 is recommended in pile foundations, bridge girders, caissons, high rise structures and such structures where quality of concrete is of prime importance.
• Perma Plast PC – 101 is also recommended where very high initial and ultimate strengths are expected.

ADVANTAGES

• Hyper plasticizing action of this product produces free flowing concrete, with most kinds of aggregates and varying fine aggregates.
• Perma Plast PC – 101 maintains the workability over long periods.
• Perma Plast PC – 101 helps in production of high quality concrete which exhibits superior compressive, tensile and flexural strengths and exhibits excellent resistance to chloride and sulphide attacks on concrete.
• Perma Plast PC – 101 is compatible with all types of cements including pozzolanic and fly ash / slag cements.
• Perma Plast PC – 101 is specially suggested in all high strength concrete and in construction of marine structures, pile foundations and bridge girders.
• Perma Plast PC – 101 enables production of dense impermeable and fair finish concrete.

DIRECTIONS FOR USEPerma Plast PC – 101 should be added to the mix along with water. Addition of plasticizers to the dry mix or dry cement should be avoided. During long transits of concrete fifty percent of the recommended dosage of Perma Plast PC – 101 can be added at the batching plant and the remaining fifty percent at site just before pouring.

DOSAGEField trials should be conducted to determine the optimum addition rates of Perma Plast PC – 101. However a dosage of 0.4 to 3 percent by weight of cement, depending upon type of concrete required, is recommended.

COMPOSITIONPerma Plast PC – 101 is based on hyper plasticizing Poly Carboxylic Ethers.

HEALTH AND SAFETYPerma Plast PC – 101 is not a health hazard or fire risk. Spillages should be washed immediately to avoid possibilities of slipping.

PACKINGPerma Plast PC – 101 is available in 25kg, 100kg and 200kg drum.

SHELE LIFEPerma Plast PC – 101 has a shelf life of 24 months if stored in manufacturer’s original drums. Perma Plast PC – 101 should be stored in place where temperature does not drop below + 5°C. If the product is frozen, thaw at + 30°C and agitate until completely reconstituted. Shake well before use.

Workability Retaining Admixture

 

A POLYCARBOXYLIC ETHER BASED HIGH RANGE PLASTICISING AND WORKABILITY RETENTION ADMIXTURE FOR HIGH QUALITY CONCRETE

 

DESCRIPTION

Perma Plast PC – 404 is based on hyper plasticising synthetic polymers. It may be dispensed at dosages varying between 0.5 to 2 percent by weight of cement depending upon type of concrete required.

 

PRIMARY USES

• Perma Plast PC – 404 is recommended in all high grade concrete which has a cement content of over 400 kg/m3.
• Perma Plast PC – 404 help to control of bleed resulting from poor grading of fine aggregate in the concrete mix.
• Perma Plast PC – 404 is of use in hot weather concreting and in concreting works in areas lying high temperature zones.
• Perma Plast PC – 404 is recommended in hot weather concreting where workability retention over long periods is required.
• Perma Plast PC – 404 is recommended in marine structures, pile foundations, bridge girders, caissons, high rise structures and such structures where quality of concrete is of prime importance.
• Perma Plast PC – 404 is also recommended where very high initial and ultimate strengths are expected.

 

ADVANTAGES

• Hyper plasticizing action of this product produces free flowing concrete with most kinds of aggregates and varying fine aggregates.
• Perma Plast PC – 404 maintains the workability over long periods.
• Perma Plast PC – 404 helps in production of high quality concrete which exhibits superior compressive, tensile and flexural strengths and exhibits excellent resistance to chloride and sulphide attacks on concrete.
• Perma Plast PC – 404 is compatible with all types of cements including pozzolanic and fly ash / slag cements.
• Perma Plast PC – 404 is specially suggested in all high strength concrete and in construction of marine structures, pile foundations and bridge girders.
• Perma Plast PC 404 enables production of dense impermeable and fair finish concrete.
• Perma Plast PC – 404 helps to control segregation and bleed in concrete resulting from poor fine aggregate grading.

 

DIRECTIONS FOR USE

Perma Plast PC – 404 should be added to the mix along with water. Addition of plasticizers to the dry mix or dry cement should be avoided. During long transits of concrete fifty percent of the recommended dosage of Perma Plast PC – 404 can be added at the batching plant and the remaining fifty percent at site just before pouring.

 

COMPOSTION

Perma Plast PC – 404 is based on hyper plasticizing poly carboxylic ether polymers.

 

PACKING

Perma Plast PC – 404 is available in 25 kg, 100 kg and 200 kg HDPE drum.

 

SHELF LIFE

Perma Plast PC 404 has a shelf life of 12 months from the date of manufacturers original drums. Perma Plast PC – 404 should be stored in a place where temperature does not drop below + 5°C. If the product is frozen, thaw at+ 30°C and agitate until completely reconstituted. Shake well before use.

Perma Plast PC-405

 

A POLYCARBOXYLIC ETHER BASED HIGH RANGE PLASTICISING AND WORKABILITY RETENTION ADMIXTURE FOR HIGH QUALITY CONCRETE.

 

DESCRIPTION

Perma Plast PC – 405 is based on hyper plasticising synthetic polymers. It may be dispensed at dosages varying between 0.5 to 2 percent by weight of cement depending upon type of concrete required.

 

PRIMARY USES

• Perma Plast PC – 405 is recommended in all high grade concrete which has a cement content of over 400 kg/m3.
• Perma Plast PC – 405 help to control of bleed resulting from poor grading of fine aggregate in the concrete mix.
• Perma Plast PC – 405 is of use in hot weather concreting and in concreting works in areas lying high temperature zones.
• Perma Plast PC – 405 is recommended in hot weather concreting where workability retention over long periods is required.
• Perma Plast PC – 405 is recommended in marine structures, pile foundations, bridge girders, caissons, high rise structures and such structures where quality of concrete is of prime importance.
• Perma Plast PC – 405 is also recommended where very high initial and ultimate strengths are expected.

 

ADVANTAGES

• Hyper plasticizing action of this product produces free flowing concrete with most kinds of aggregates and varying fine aggregates.
• Perma Plast PC – 405 maintains the workability over long periods.
• Perma Plast PC – 405 helps in production of high quality concrete which exhibits superior compressive, tensile and flexural strengths and exhibits excellent resistance to chloride and sulphide attacks on concrete.
• Perma Plast PC – 405 is compatible with all types of cements including pozzolanic and fly ash / slag cements.
• Perma Plast PC – 405 is specially suggested in all high strength concrete and in construction of marine structures, pile foundations and bridge girders.
• Perma Plast PC 405 enables production of dense impermeable and fair finish concrete.
• Perma Plast PC – 405 helps to control segregation and bleed in concrete resulting from poor fine aggregate grading.

 

PACKING

Perma Plast PC – 405 is available in 25 kg, 100 kg and 200 kg HDPE drum.

Perma Plast Super 280 B

 

A HIGH RANGE, LOW DOSAGE, SUPER PLASTICISING ADMIXTURE FOR SLUMP RETENTION

 

DESCRIPTION

Perma Plast Super 280 B  is a high range, low dosage, super plasticising admixture for slump retention. It is a product based on refined naphthalene formaldehyde and ligno sulfonate blends.

 

PRIMARY USES

To produce self-compacting flowing concrete. To produce high early strength concrete for delayed slump retention and for long overhauls. Ideally suited for commercial RMC plants and concrete made with crushed sand.

 

TYPICAL APPLICATIONS

For the production of high workability concrete where heavily congested reinforcement exist or poor access is available. To produce flowing self Compacting concrete which requires minimal labour to place. For the production of high strength, high workability concrete. Particularly beneficial in hot climatic conditions and in ready mix concrete. It is based on naphthalene formaldehyde blends.

 

ACTION

Perma Plast Super 280 B  dramatically increases the workability of concrete mixes by its powerful deflocculating and dispersing effect on the cement particles. This increase in workability can be utilized to produce high workability concrete or to enable significant reductions in free water content.

 

PACKING

Perma Plast Super 280 B  is available in 30 kg, 120 Kg & 250 Kg HDPE Drum.

Perma Rheo Plast 220

 

A HIGH RANGE, LOW DOSAGE, SUPER PLASTICISING ADMIXTURE FOR SLUMP RETENTION

 

DESCRIPTION

Perma Rheo Plast -220 is a high range, low dosage, super plasticising admixture for slump retention. It is a product based on refined naphthalene formaldehyde and copolymers.

 

PRIMARY USES

To produce self- compacting flowing concrete. To produce high early strength concrete for delayed slump retention and for long over hauls. Ideally suited for commercial RMC plants and concrete made with crushed sand.

 

TYPICAL APPLICATIONS

For the production of high workability concrete where heavily congested reinforcement exist, or poor access is available. To produce flowing self compacting concrete which requires minimal labour to place. For the production of high strength, high workability concrete. Particularly beneficial in hot climatic conditions and in ready mix concrete.

 

ACTION

Perma Rheo Plast – 220 dramatically increases the workability of concrete mixes by its power ful deflocculating and dispersing effect on the cement particles. This increase in workability can be utilized to produce high workability concrete or to enable significant reductions in free water content.

 

DOSAGE

Field trials should be conducted to determine the optimum addition rates of Perma Rheo Plast – 220. However a dosage of 300 gms of 700 gms is recommended per 50 kg bag of cement depending upon requirements.

 

PACKING

Perma Rheo Plast -220 is available in 30 kg, 120 Kg & 250 kg HDPE Drum.

 

SHELF LIFE

24 months from the date of manufacturing if stored in a cool and dry place in original packing.

Polycarboxylic Ether Based Superplasticizers

HIGH RANGE HYPER PLASTICISING AND SLUMP RETENTION ADMIXTURE BASED ON POLYCARBOXYLIC ETHER

SPECIFICATIONComplying to: A.S.T.M. C494: Type A.F. and G IS -9103-2007.

DESCRIPTIONPerma Plast PC – 304 is based on Polycarboxylic ether and synthetic polymers. It may be dispensed at dosages varying between to 0.6 to 2 percent by weight of cement depending upon type of concrete required.

PRIMARY USES

• Perma Plast PC – 304 is recommended in all high grade concrete which has a cement. content of over 375 kg/m3.
• Perma Plast PC – 304 is recommended in hot weather concreting where workability retention over long periods is required.
• Perma Plast PC – 304 is recommended in marine structures, pile foundations, bridge girders, caissons and such structures where quality of concrete is of prime importance.
• Perma Plast PC – 304 is also recommended where very high initial and ultimate strengths are expected.
• Perma Plast PC – 304 is also recommended for use with Microsilica.
• Perma Plast PC – 304 is recommended in hot weather concreting.

ADVANTAGES

• Ne aggregates.owing concrete, with most kinds of aggregates and varying  Hyper plasticizing action of this product produces free
• Perma Plast PC – 304 maintains the workability over long periods.
• exural strengths and exhibits excellent resistance to chloride and sulphide attacks on concrete. Perma Plast PC – 304 helps in production of high quality concrete which exhibits superior compressive, tensile and
• y ash / slag cements and Microsillica. Perma Plast PC – 304 is compatible with all types of cements including puzzalonic,
• Perma Plast PC – 304 is specially suggested in all high strength concrete and in construction of marine structures, pile foundations and bridge girders.
• nish concrete. Perma Plast PC – 304 enables production of dense impermeable and fair
• Perma Plast PC – 304 enables concreting during hot weather and in the areas lying in high temperature zones.

COMPOSITIONPerma Plast PC – 304 is based on Poly Carboxylic ether and hyper plasticising synthetic polymers carefully selected to give superior initial and ultimate results.

HEALTH AND SAFETYre risk. Spillages should be washed immediately to avoid possibilities of slipping.ï��Perma Plast PC – 304 is not a health hazard or

PACKINGPerma Plast PC – 304 is available in 25 kg, 100 kg, 200 kg HDPE drum.

SHELF LIFEPerma Plast PC – 304 has a shelf life of 12 months if stored in manufacturer’s original packing in a cool and dry place away from moisture and heat.

Admixtures in concrete are very important. They offer high compressive strength, workability, durability, wear resistance, watertight and great finish in the construction of modern structures. These are the manufactured chemical that is added to the concrete before the mixing or sometimes during mixing. It is extremely beneficial and you should use this to build successful projects.

We at Perma Construction Aids Pvt. Ltd. you will get the best quality products in admixtures for concrete. We are the best admixtures for concrete manufacturer and supplier. Based in Sarigam, Gujarat our company supplies product all around the world including Sri Lanka, Maldives, Bangladesh and Nepal.

Our products are loved by all and we stand as the best admixtures for concrete suppliers.

High performance concrete admixtures are added to the mixture of cement and water in a small amount to increase the durability of the mixture so that the construction lasts for long. To fix the concrete behaviour and also to control hardening and setting, this product is used by several constructors from all around the country and even in other countries like Sri Lanka, the Maldives and many more from our company because we are the best Concrete Admixture Suppliers.

At Perma Construction Aids Pvt. Ltd. you will get the best quality products. We are the leading concrete admixture manufacturer producing goods that are advanced and superior to other products in the market.

We are popular concrete admixture exporters Gujarat, India. Contact us and get our products.

We are offering Admixtures Perma Plast Super. Perma Plast Super - 330 is a high range, low dosage, super plastering admixture for slump retention. It is a protect based on refined Naphthalene formal dehydeblends. Primary Uses : To produce self-compacting flowing concrete. To produce high early strength concrete for delayed slump retention and for long over hauls, ideally suited for commercial RMC plants. Packing : Perma Plast Super - 330 is available in 120 kg & 250 kg.

Perma Plast Super - 330 is a high range, low dosage, super plastering admixture for slump retention. It is a protect based on refined Naphthalene formal dehydeblends. Primary Uses :To produce self-compacting flowing concrete. To produce high early strength concrete for delayed slump retention and for long over hauls, ideally suited for commercial RMC plants. Packing : Perma Plast Super - 330 is available in 120 kg & 250 kg

Primary Uses : To produce self-compacting flowing concrete. To produce high early strength concrete for delayed slump retention & for long over hauls. Advantages :

• Increased workability-A concrete with a slump of 50 to 100 mm can be turned into self compacting, flowing concrete that requires little or no vibration, with the simple addition of Perma Plast Super
• High strength mixes - Due to reduction in water content higher grade concrete can be produced at normal work abilities and cement contents
• Improved Compaction - Concrete can be placed and compacted more quickly and easily when Perma Plast-Super is incorporated to the mix
• Superior Finish - Surface finish is improved, sand runs and blemishes are reduced
• Durable concrete- Enables production of economical, dense and more permeable concrete

Packing : Perma Plast Super is available in 30 kg, 120 kg & 240 kg drum.

Primary Uses :To produce self-compacting flowing concrete. To produce high early strength concrete for delayed slump retention & for long over hauls. Advantages :

• Increased workability-A concrete with a slump of 50 to 100 mm can be turned into self compacting, flowing concrete that requires little or no vibration, with the simple addition of Perma Plast Super
• High strength mixes - Due to reduction in water content higher grade concrete can be produced at normal work abilities and cement contents
• Improved Compaction - Concrete can be placed and compacted more quickly and easily when Perma Plast-Super is incorporated to the mix
• Superior Finish - Surface finish is improved, sand runs and blemishes are reduced
• Durable concrete- Enables production of economical, dense and more permeable concrete

Packing : Perma Plast Super is available in 30 kg, 120 kg & 240 kg drum

Perma Plast Super PS 34 is a multicomponent liquid admixture based on high molecular weight polymers and napthalene formaldehyde. The Perma Plast Super PS 34 is used to produce self-compacting flowing concrete and to produce high early strength concrete. We manufacture, export and supply the best quality Perma Plast Super PS 34 to our esteemed clients across the world. We provide Perma Plast Super PS 34 at the most reasonable prices. Primary Usage :

• For the production of high workability concrete where heavily congested reinforcements exist, or poor access is available.
• To produce flowing self compacting concrete which requires minimal labor to place
• For the production of high strength, high workability concrete
• Particularly beneficial in hot climatic conditions

Dosage : Field trials should be carried out with the given cement and aggregates to arrive at optimum dosages for the desired property to be achieved. However for guidance we specify a range of 0.5 to 1.5 percent by weight of cement for initiating trials based on type of concrete required. Packing : Perma Plast-super � PS34 is available in 25 kgs and 110 kgs drum.

We bring for high quality admixture for concrete which used in different construction application. We use high quality raw material for manufacturing of admixture for concrete. We have varios admixtures likeLiquid Concrete Additives Admixture , Construction Concrete Admixture , Cement Concrete Hardener , Liquid Cement Tiles Hardener , Concrete Cement Admixture , Integral Waterproofing Liquid, Waterproof Coatings Admixture , Paver Block Silicon Chemical Hardener, Construction Chemical Admixture , Cement Brick Liquid Admixture , Air Entraining Concrete Admixture , Construction Chemicals Admixture , Concrete Tile Hardener & Waterproofing Admixture

Perma Plast Clear QS is primarily used in the fast setting of the mortars and concretes. We are the renowned Manufacturer, Exporter and Supplier of the excellent quality Perma Plast Clear QS in the global market. The Perma Plast Clear QS that we provide is manufactured by using the high-grade materials and highly appreciated for its efficiency and performance. We make avail this Perma Plast Clear QS at very economical price. Primary Use :

• In fast setting concretes and mortars
• Concreting of pre-cast elements
• Concreting and rendering in very low temperatures
• In reducing rebound losses in sprayed mortar
• To waterproof plaster and concrete

Direction for use : In case of shot-creting/guniting, perma plast clear QS is mixed in the gauging water in the required proportion before addition to the dry mix. Hence it can be successfully used in both dry and wet shot-creting processes. In concrete and mortars for precasting elements. Perma Plast Clear QS is dosed through a separate dosing tank fitted above the mixer. It can be dosed manually as well after addition of required water. Advantages :

• Rebound losses in plastering mortar shot â�� creting and guniting are minimized. Saving on material, labor and machine time.
• Perma Plast Clear QS is liquid in form, hence easy to use.
• The plasticizing action of Perma Plast Clear QS helps in complete hydration of cement there by achieving superior strength.
• Wastage due to breaking in pre-cast elements is reduced savings on production cost.
• Perma Plast Clear QS can be used with all types of cements.
• To water proof plaster and concrete.

Dosage : Required dosage of Perma Plast Clear QS has to be arrived at site by practical trials. The dosage is dependent on temperature conditions, type of cement, type of acceleration required. We however recommend dosages of 1 to 10 percent by weight of cement. Lower dosages are however used in precast elements and higher dosages are used in shotcreting. For waterproofing the minimum dosage of the product shall be 250 gms/50kg bag of cement.

Perma Plast Super – 223

 

A HIGH RANGE, LOW DOSAGE SELF COMPACTING SUPER PLASTICISING ADMIXTURE

 

 DESCRIPTION

Perma Plast Super-223 is a multi component liquid admixture based on high molecular weight polymers and napthalene formaldehyde to produce self-compacting flowing concrete and to produce high early strength concrete.

 

PRIMARY USES

For the production of high workability concrete where heavily congested reinforcements exist or poor access is available. To produce flowing self compacting concrete which requires minimal labour to place. For the production of high strength, high workability concrete. Particularly beneficially in hot climatic conditions.

 

DIRECTIONS FOR USE

Perma Plast Super-223 should be added to the mix during the cycle at the same time as water or aggregates. Never add Perma Plast Super-223 to dry cement.

 

 DOSAGE

Field trials should be carried out with the given cement and aggregates to arrive at optimum dosages for the desired property to be achieved. However for guidance we specify a range of 0.4 to 1.5 percent by weight of cement for initiating trials based on type of concrete required.

 

PACKING

Perma Plast Super-223 is available in 30 kg, 120 kg and 250 kg drum.

 

SHELF LIFE

Perma Plast Super-223 has a shelf life of 24 months from the date of manufacture if stored in a cool, dry place in original packing.

Perma Plast PC - 302 is based on Polycarboxylic ether and synthetic polymers, it may be dispensed at dosages varying between 0.6 to 2 percent by weight of cement depending upon type of concrete required. Primary Uses :

• Perma Plast PC - 302 is recommended in all high grade concrete which has a cement content of over 375 kgs./m3
• Perma Plast PC - 302 is recommended in hot weather concreting where workability retention over long periods are required
• Perma Plast PC - 302 is recommended in marine structures, pile foundations, bridge girders, caissons and such structures where quality of concrete is of prime importance
• Perma Plast PC - 302 is also recommended where very high initial and ultimate strengths are expected
• Perma Plast PC - 302 is also recommended for use with Micro silica

Advantages :

• Hyper plasticising action of this product produces free flowing concrete, with most kinds of aggregates and varying fine aggregates
• Perma Plast PC - 302 maintains the workability overlong periods
• Perma Plast PC - 302 helps in production of high quality concrete which exhibits superior, compressive, tensile and flexural strengths and exhibits excellent resistance to chloride and sulphide attacks on concrete
• Perma Plast PC - 302 is compatible with all types of cements including puzzonic, fly ash/slag cements and Micro silica
• Perma Plast PC - 302 is specially suggested in all high strength concrete and in construction of marine structure, pile foundations and bridge girders
• Perma Plast PC - 302 enables production of dense impermeable and fair finish concrete

Packing : Perma Plast PC - 302 is available in 30 kg. And 250 kgs drum

Super Admixture For Plasticising

 

A HIGH RANGE, LOW DOSAGE, SUPER PLASTICISING ADMIXTURE FOR SLUMP RETENTION

 

SPECIFICATION

Complying to A.S.T.M C494 Type A, F & G. IS 9103-2007

 

DESCRIPTION

Perma Plast Super -210 is a high range, low dosage, super plasticizing admixture for slump retention. It is a product based on refined naphthalene formaldehyde.

 

PRIMARY USES

To produce self- compacting flowing concrete. To produce high early strength concrete for delayed slump retention and for long over hauls. Ideally suited for commercial RMC plants and concrete made with crushed sand.

 

TYPICAL APPLICATIONS

For the production of high workability concrete where heavily congested reinforcements exist or poor access is available. To produce flowing self compacting concrete which requires minimal labour to place. For the production of high strength, high workability concrete. Particularly beneficial in hot climatic conditions and in ready mix concrete.

 

ACTION

Perma Plast Super- 210 dramatically increases the workability of concrete mixes by its powerful deflocculating and dispersing effect on the cement particles. This increase in workability can be utilized to produce high workability concrete or to enable significant reductions in free water content.

 

DOSAGE

Field trials should be conducted to determine the optimum addition rates of Perma Plast Super- 210. However a dosage of 300 gms to 700 gms is recommended per 50 kg bag of cement depending upon requirements.

 

PACKING

Perma Plast Super -210 is available in 30 kg, 120 Kg & 250 kg HDPE Drum.

 

SHELF LIFE

Perma Plast Super -210 has a shelf life of 24 months from the date of manufacturing if stored in a cool and dry place in original packing.

High Range Hyper Plasticising Superior Quality Admixture for High Quality ConcretePerma Plast Super – 220 C is based on hyper plasticising sulphonated synthetic polymers. It may be dispensed at dosages varying between 0.5 to 2 percent by weight of cement depending upon type of concrete required.

Primary Uses

• Perma Plast Super – 220 C is recommended in all high grades concrete.
• Perma Plast Super – 220 C is recommended in hot weather concreting where workability retention over long periods is required.
• Perma Plast Super – 220 C is recommended in marine structures, pile foundations, bridge girders, caissons and such structures where quality of concrete is of prime importance.
• Perma Plast Super – 220 C is also recommended where very high initial and ultimate strengths are expected.

Advantages

• Hyper plasticising action of this product produces owing concrete, with most kinds of aggregates and varying fine aggregates
• Perma Plast Super – 220 C maintains the workability over long periods.
• Perma Plast Super – 220 C helps in production of high quality concrete which exhibits superior compressive, tensile and flexural strengths and exhibits excellent resistance to chloride and sulphide attacks on concrete.
• Perma Plast Super – 220 C is compatible with all types of cements including pozzolanic and fly ash / slag cements.
• Perma Plast Super – 220 C is specially suggested in all high strength concrete and in construction of marine structures, pile foundations and bridge girders.
• Perma Plast Super – 220 C enables production of dense impermeable and fair finish concrete.ï��

Packing

• Perma Plast Super – 220 C is available in 30 kg and 250 kg drum.

High range hyper plasticising superior quality admixture for high quality concrete.

 

DESCRIPTION : Perma Plast PC 220 C is based on hyper plasticising sulphonated synthetic polymers. It may be dispensed at dosages varying between 0.5 to 2 percent by weight of cement depending upon type of concrete required.

 

PRIMARY USES

• Perma Plast PC 220 C is recommended in all high grades concrete.

• Perma Plast PC 220 C is recommended in hot weather concreting where workability retention over long periods is required.

• Perma Plast PC 220 C is recommended in marine structures, pile foundations, bridge girders, caissons and such structures where quality of concrete is of prime importance.

• Perma Plast PC 220 C is also recommended where very high initial and ultimate strengths are expected.

 

ADVANTAGES

• Hyper plasticising action of this product produces flowing concrete, with most kinds of aggregates and varying fine aggregates.

• Perma Plast PC 220 C maintains the workability over long periods.

• Perma Plast PC 220 C helps in production of high quality concrete which exhibits superior compressive, tensile and flexural strengths and exhibits excellent resistance to chloride and sulphide attacks on concrete.

• Perma Plast PC 220 C is compatible with all types of cements including pozzolanic and fly ash / slag cements.

• Perma Plast PC 220 C is specially suggested in all high strength concrete and in construction of marine structures, pile foundations and bridge girders.

• Perma Plast PC 220 C enables production of dense impermeable and fair finish concrete.

 

DIRECTIONS FOR USE : Perma Plast PC 220 C should be added to the mix along with water. Addition of plasticisers to the dry mix or dry cement should be avoided. During long transits of concrete fifty percent of the recommended dosage of Perma Plast PC 220 C can be added at the batching plant and the remaining fifty percent at site just before pouring.

 

PACKING : Perma Plast PC 220 C is available in 30 kg and 250 kg drum.

Perma Plast PC - 502 is a superior quality super plasticiser cum very high range water reducer based on high molecular weight polycarboxylic copolymers. Primary Uses :

• To produce free flowing and self compacting concrete
• To increase the compressive strengths of the concretes and mortars to highest possible limits
• To bring down the water cement ratios to bare minimum
• To achieved early high strengths
• To achieve prolonged workability

Advantages :

• Perma Plast PC - 502 is a light colored liquid hence does not change the colour of concrete
• Perma Plast PC - 502 is highly useful in pre-cast units
• Perma Plast PC - 502 is of special advantage in concreting RCC members with congested reinforcements
• Perma Plast PC - 502 is very easy to dose. The dosing quantity of the material can be added to the concrete or mortar mix at any stage of mixing

Packing : Perma Plast PC - 502 is supplied in 30 kg. 100 kg packs

Waterproofing admixtures are used to prevent concrete from the penetration of water. It is seen that concrete absorbs water and these makes them weak and eventually, the surface starts falling off exposing the rods and other inside structures. This can lead to heavy repairing costs and your building will eventually lose its strength. The main reason to use this product is to make your structure hydrophobic.

If you want to make your structure strong and durable and want to keep it away from the damage that can be caused by the water, contact the best waterproofing admixtures manufacturer, Perma Construction Aids Pvt. Ltd. Our products are loved by all because of the quality and texture. We use only tested raw materials that are approved by the experts. For us clients satisfaction is important and we understand that to satisfy our clients, we cannot comprise with the quality.

Therefore contact us and get our products as we are the leading waterproofing admixtures suppliers, Gujarat, India.

Perma Hyper Plast HP - 34 is based on hyper plasticizing sulphonated synthetic polymers. It may be dispensed at dosages varying between 1 to 2 percent by weight of cement depending upon type of concrete required. Primary Uses :

• Perma Hyper Plast HP - 34 is recommended in all high grade concrete which has a cement content of over 375 kgs per m3
• Perma Hyper Plast HP - 34 is recommended in hot weather concreting where work ability retention over long periods are required
• Perma Hyper Plast HP - 34 is recommended in marine structures, pile foundations bridge girders, caissons and such structures where quality of concrete is of prime importance
• Perma Hyper Plast HP - 34 is also recommended where very high initial and ultimate strengths are expected
• Perma Hyper Plast HP - 34 is also recommended for use with Micro silica

Advantages :

• Hyper plasticizing action of this product produces free flowing concrete, with most kinds of aggregates and varying fine aggregates
• Perma Hyper Plast HP - 34 maintains the workability over long periods
• Perma Hyper Plast HP - 34 helps in production of high quality concrete which exhibits superior compressive, tensile and flexural strengths and exhibits excellent resistance to chloride and sulpide attacks on concrete
• Perma Hyper Plast HP - 34 is compatible with all types of cements including puzzolonic, fly ash/slag cements including puzzolonic, fly ash/slag cements and Micro silica
• Perma Hyper Plast HP - 34 plast is specially suggested in all high strength concrete and in construction of marine structures, pile foundations and bridge girders
• Perma Hyper Plast HP - 34 enables production of dense impermeable and fair finish concrete

Packing :Perma Hyper Plast HP - 34 is available in 25 kgs, and 250 kgs. drum

Air Entraining Admixtire Perma Plast AEA is a high performance, chloride-free water reducing cum air entraining agent for mortars, concrete and lightweight aggregate mixes. The introduction of Perma Plast AEA brings about entrainment of innumerable microscopic air bubbles of suitable size and spacing evenly distributed throughout the matrix. Perma Plast AEA lowers the surface tension of the mixing water. As a result, there is considerable reduction in the amount of mixing water required. The plasticizing nature of air entrainment assists in producing a dense, uniform close textured surface free gravel nests and honey combing. Perma Plast AEA that we manufacture, export and supply is compatible with all types of cements, sands and avoids Efflorescence and bleed in concrete. Advanteges :

• It improves work ability thus Improving .
• Reduces water cement ratio thereby Increasing strength.
• Increases resistance of mortars to attack by deicing salts and freeze and thaw cycles .
• The concrete produced with PernaPlast AEA Is homogeneous and freefrom bleeding.
• Air entrainmentof microscopic bubbles assists In producing cohesive concrete freefrom bleed which reduces segregation.

Poly Carboxylic Ethers Admixture

HIGH RANGE HYPER PLASTICISING SUPERIOR QUALITY ADMIXTURE FOR HIGH QUALITY CONCRETE BASED ON POLY CARBOXYLIC ETHERS

DESCRIPTIONPerma Plast PC – 101 is based on hyper plasticising Poly Carboxylic Ethers. It may be dispensed at dosages varying between 0.4 to 3 percent by weight of cement depending upon type of concrete required.

PRIMARY USES

• Perma Plast PC – 101 is recommended in all high grade concrete which has a cement content of over 350 kg/m3.
• Perma Plast PC – 101 is recommended in hot weather concreting where workability retention over long periods is required.
• Perma Plast PC – 101 is recommended in pile foundations, bridge girders, caissons, high rise structures and such structures where quality of concrete is of prime importance.
• Perma Plast PC – 101 is also recommended where very high initial and ultimate strengths are expected.

ADVANTAGES

• Hyper plasticizing action of this product produces free flowing concrete, with most kinds of aggregates and varying fine aggregates.
• Perma Plast PC – 101 maintains the workability over long periods.
• Perma Plast PC – 101 helps in production of high quality concrete which exhibits superior compressive, tensile and flexural strengths and exhibits excellent resistance to chloride and sulphide attacks on concrete.
• Perma Plast PC – 101 is compatible with all types of cements including pozzolanic and fly ash / slag cements.
• Perma Plast PC – 101 is specially suggested in all high strength concrete and in construction of marine structures, pile foundations and bridge girders.
• Perma Plast PC – 101 enables production of dense impermeable and fair finish concrete.

DIRECTIONS FOR USEPerma Plast PC – 101 should be added to the mix along with water. Addition of plasticizers to the dry mix or dry cement should be avoided. During long transits of concrete fifty percent of the recommended dosage of Perma Plast PC – 101 can be added at the batching plant and the remaining fifty percent at site just before pouring.

DOSAGEField trials should be conducted to determine the optimum addition rates of Perma Plast PC – 101. However a dosage of 0.4 to 3 percent by weight of cement, depending upon type of concrete required, is recommended.

COMPOSITIONPerma Plast PC – 101 is based on hyper plasticizing Poly Carboxylic Ethers.

HEALTH AND SAFETYPerma Plast PC – 101 is not a health hazard or fire risk. Spillages should be washed immediately to avoid possibilities of slipping.

PACKINGPerma Plast PC – 101 is available in 25kg, 100kg and 200kg drum.

SHELE LIFEPerma Plast PC – 101 has a shelf life of 24 months if stored in manufacturer’s original drums. Perma Plast PC – 101 should be stored in place where temperature does not drop below + 5°C. If the product is frozen, thaw at + 30°C and agitate until completely reconstituted. Shake well before use.

Perma Plast PC- 600             

 

HIGH RANGE POLY CARBOXYLIC ETHER BASED ADMIXTURE FOR HYPERPLASTICIXING AND GOOD SLUMP RETENTION IN CONCRETE. 

 

DESCRIPTION

Perma Plast PC – 600 is based on hyper plasticising poly carboxylic ether. It may be dispensed at dosages varying between 0.5 to 2 percent by weight of cement depending upon type of concrete required.

 

PRIMARY USES

• Perma Plast PC – 600 is recommended in all high grade concrete which has a cement content of over 400 kg/m3.
• Perma Plast PC – 600 is recommended in hot weather concreting where workability retention over long periods is required.
• Perma Plast PC – 600 is recommended in marine structures, pile foundations; bridge girders, caissons, high rise structures and such structures where quality of concrete is of prime importance.
• Perma Plast PC – 600 is also recommended where very high initial and ultimate strengths are expected.

 

ADVANTAGES

• Hyper plasticizing action of this product produces free flowing concrete with most kinds of aggregates and varying fine aggregates.
• Perma Plast PC – 600 maintains the workability over long periods.
• Perma Plast PC – 600 helps in production of high quality concrete which exhibits superior compressive, tensile and flexural strengths and exhibits excellent resistance to chloride and sulphide attacks on concrete.
• Perma Plast PC – 600 is compatible with all types of cements including pozzolanic and fly ash / slag cements.
• Perma Plast PC – 600 is specially suggested in all high strength concrete and in construction of marine structures, pile foundations and bridge girders.
• Perma Plast PC -600 enables production of dense impermeable and fair finish concrete.

 

PACKING :

Perma Plast PC – 600 is available in 200 kg Drum.

PERMA PLAST PC-200        

PLASTICISING AND SLUMP RETENTION ADMIXTURE FOR CONCRETING IN TEMPERATE ZONE

DESCRIPTIONPerma Plast PC -200 is a medium range plasticizing and slum retaining admixture of use in temperate zones where workability retention is important on concreting sites. Perma Plast PC -200 is recommended in all general concreting.

PRIMARY USES

• Perma Plast PC -200  is   recommended  in all general concreting in elevated temperatures and in areas slump retention is desired.  
• Perma Plast PC -200 is recommended in hot weather concreting where workability retention over long  periods are required.
• Perma Plast PC -200 is recommended in pile foundations, bridge girders, caissons high rise structures and such structures where quality of concrete is of prime importance.

ADVANTAGES

• Perma Plast PC-200 is suitable for use with all types aggregates and cements.
• Perma Plast PC-200 maintains the workability over long periods.
• Perma Plast PC-200 helps in production of good quality of concrete continuously.
• Perma Plast PC -200 is compatible with all types of cements including puzzolonic and fly ash / slag cements.
• Perma Plast PC-200 is specially suggested in all high strength concrete and in construction of marine structures, pile foundations and bridge girders.
• Perma Plast PC-200 enables production of dense impermeable and fair finish concrete.

DIRECTIONS FOR USEPerma Plast PC -200 should be added to the mix along with water. Addition of plasticizers to the dry mix or dry cement should be avoided. During long transits of concrete fifty percent of the recommended dosage of Perma Plast PC-200 can be added at the batching plant and the remaining fifty percent at site just before pouring.

PACKING Perma Plast PC-200 is available in 25kg, 100Kg and 200 Kg drum.

PERMA PLAST PC-300        

SUPER PLASTICISING AND SLUMP RETENTION ADMIXTURE FOR CONCRETING IN TEMPERATE ZONE

DESCRIPTIONPerma Plast PC -300 is a high range plasticizing and slum retaining admixture of use in temperate zones where workability retention is important on concreting sites. Perma Plast PC -300 is recommended in production of high strength concrete.

PRIMARY USES

• Perma Plast PC -300  is   recommended  in production of high strength concrete in elevated temperatures and in areas slump retention is desired.  
• Perma Plast PC -300 is recommended in hot weather concreting where workability retention over long  periods are required.
• Perma Plast PC -300 is recommended in pile foundations, bridge girders, caissons high rise structures and such structures where quality of concrete is of prime importance.

ADVANTAGES

• Perma Plast PC-300 is suitable for use with all types aggregates and cements and in all weathers.
• Perma Plast PC-300 maintains the workability over long periods.
• Perma Plast PC-300 helps in production of good quality of concrete continuously.
• Perma Plast PC -300 is compatible with all types of cements including puzzolonic and fly ash / slag cements.
• Perma Plast PC-300 is specially suggested in all high strength concrete and in construction of marine structures, pile foundations and bridge girders.
• Perma Plast PC-300 enables production of dense impermeable and fair finish concrete.

DIRECTIONS FOR USE

Perma Plast PC -300 should be added to the mix along with water. Addition of plasticizers to the dry mix or dry cement should be avoided. During long transits of concrete fifty percent of the recommended dosage of Perma Plast PC-300 can be added at the batching plant and the remaining fifty percent at site just before pouring.

PACKING Perma Plast PC-300 is available in 25kg, 100Kg and 200 Kg drum.

High Range Poly Carboxylic Ether Based Admixture for Hyperplasticixing and Good Slump Retention in ConcreteWeather Concreting Admixtures is based on hyper plasticising poly carboxylic ether. It may be dispensed at dosages varying between 0.5 to 2 percent by weight of cement depending upon type of concrete required.

Primary Uses

• Perma Plast PC – 401 C is recommended in all high grade concrete which has a cement content of over 400 kg/m3.
• Perma Plast PC – 401 C is recommended in hot weather concreting where workability retention over long periods is required.
• Perma Plast PC – 401 C is recommended in marine structures, pile foundations; bridge girders, caissons, high rise structures and such structures where quality of concrete is of prime importance.
• Perma Plast PC – 401 C is also recommended where very high initial and ultimate strengths are expected.

Advantages

• Hyper plasticizing action of this product produces free flowing concrete with most kinds of aggregates and varying fine aggregates.
• Perma Plast PC – 401 C maintains the workability over long periods.
• Perma Plast PC – 401 C helps in production of high quality concrete which exhibits superior compressive, tensile and flexural strengths and exhibits excellent resistance to chloride and sulphide attacks on concrete.
• Perma Plast PC – 401 C is compatible with all types of cements including pozzolanic and fly ash / slag cements.
• Perma Plast PC – 401 C is specially suggested in all high strength concrete and in construction of marine structures, pile foundations and bridge girders.
• Perma Plast PC -401 C enables production of dense impermeable and fair finish concrete.

Packing

• Perma Plast PC – 401 C is available in 200 kg Drum.

High range poly carboxylic ether based admixture for hyperplasticixing and good slump retention in concrete.

 

DESCRIPTION : Perma Plast PC – 401 C is based on hyper plasticising poly carboxylic ether. It may be dispensed at dosages varying between 0.5 to 2 percent by weight of cement depending upon type of concrete required.

 

PRIMARY USES

• Perma Plast PC – 401 C is recommended in all high grade concrete which has a cement content of over 400 kg/m3.
• Perma Plast PC – 401 C is recommended in hot weather concreting where workability retention over long periods is required.
• Perma Plast PC – 401 C is recommended in marine structures, pile foundations; bridge girders, caissons, high rise structures and such structures where quality of concrete is of prime importance.
• Perma Plast PC – 401 C is also recommended where very high initial and ultimate strengths are expected.

 

ADVANTAGES

• Hyper plasticizing action of this product produces free flowing concrete with most kinds of aggregates and varying fine aggregates.
• Perma Plast PC – 401 C maintains the workability over long periods.
• Perma Plast PC – 401 C helps in production of high quality concrete which exhibits superior compressive, tensile and flexural strengths and exhibits excellent resistance to chloride and sulphide attacks on concrete.
• Perma Plast PC – 401 C is compatible with all types of cements including pozzolanic and fly ash / slag cements.
• Perma Plast PC – 401 C is specially suggested in all high strength concrete and in construction of marine structures, pile foundations and bridge girders.
• Perma Plast PC -401 C enables production of dense impermeable and fair finish concrete.

Perma Rheo Plast - 210

A HIGH RANGE, LOW DOSAGE, SUPER PLASTICISING ADMIXTURE FOR SLUMP RETENTION

DESCRIPTIONPerma Rheo Plast -210 is a high range, low dosage, super plasticising admixture for slump retention. It is a product based on refined naphthalene formaldehyde.

PRIMARY USESTo produce self- compacting flowing concrete. To produce high early strength concrete for delayed slump retention and for long over hauls. Ideally suited for commercial RMC plants and concrete made with crushed sand.

TYPICAL APPLICATIONSFor the production of high workability concrete where heavily congested reinforcements exist or poor access is available. To produce flowing self compacting concrete which requires minimal labour to place. For the production of high strength, high workability concrete. Particularly beneficial in hot climatic conditions and in ready mix concrete.

ACTIONPerma Rheo Plast - 210 dramatically increases the workability of concrete mixes by its powerful deflocculating and dispersing effect on the cement particles. This increase in workability can be utilized to produce high workability concrete or to enable significant reductions in free water content.

DOSAGEField trials should be conducted to determine the optimum addition rates of Perma Rheo Plast 210. However a dosage of 300 gms of 700 gms is recommended per 50 kg bag of cement depending upon requirements.

PACKINGPerma Rheo Plast -210 is available in 30 kg, 120 Kg & 250 kg HDPE Drum.

SHELF LIFEPerma Rheo Plast -210 has a shelf life of 24 months from the date of manufacturing if stored in a cool and dry place in original packing.

Retarding Admixtures is a liquid admixture for concrete based on refined Ligno sulphonate sand Naphthalene formaldehyde blends. Retarding Admixtures helps in production of super plasticised and set retarded concrete to enable the delayed pouring of concrete after its production or to get over the problems arising during hot weather concreting. Primary Uses :To produce concrete with delayed Initial and final setting times. Advantages :Use of Retarding Admixtures in hot weather ensures continuous pours resulting in monolithic sound concrete. Improves ultimate strengths significantly. Helps saving in cements in rich mixes. Packing : 10 Ltr., 25 Ltr, 100 Ltr & 210 Liters drum

Concrete is an extensively used construction material all over the world in construction and its advantages are estimated to elevate further. The Admixture is a kind of a chemical which is added to the concrete whilst making modification and making it stronger. Although concrete is very strong substance itself, adding our Admixture in concrete makes it stronger, resilient, water-resistant and immune to the all kinds of weather conditions. Our superior quality admixture in concrete provides best results for whichever construction types.With substantial industry experience and understanding, we are one of the leading Concrete Admixture suppliers and manufacturers. Our comprehensive ranges of Concrete admixture products comprise Concrete Admixtures, Concrete Construction Chemicals, and Concrete Repairing Chemicals. These products are manufactured with the help of high quality components, under the expert supervision of our personnel. Our quality control team examines products to deliver only flawless products to our clients.