MRG Natural P Pvt Ltd

Mansarovar, Jaipur, Rajasthan

We are offering gypsum powder.Mr plasto gypsum plaster can directly apply on the brick wall, rcc ceilings and blocks. This provides better finish in comparison to the commonly found plaster of paris.Mr plasto gypsum plaster is produced from the light powder-density rock sourced from the purest mines. Mr plasto gypsum plaster is made out of the highest grade of gypsum being pure white in color and having a hardness of about 40% more than any other gypsum plaster available in the indian market. Mr plasto gypsum plaster can be directly applied on all surface, . The coverage in a 25kg bag is 20 sq. Ft. With a thickness of 12mm. The fineness of 250 mesh and purity over 96% gives the best atomic bond and an absolute mirror finish.

Customers from across the globe can get in touch with us for availing our top-notch range of Mr Plasto Gypsum Tiles at modest rates. Located in Rajasthan, India, we are ranked amongst the credible Manufacturers, Exporters and Suppliers of Mr Plasto Gypsum Tiles. We manage a huge stock of the Tiles in our spacious warehouse to address the buyer’s bulk demands. We are proficient in timely delivery of the Mr Plasto Gypsum Tiles.

Mr Plasto Ready Mix Plaster is especially made to give a superior finish to the walls. A premix single application plaster, it is made to improve the performance and workability. Mr Plasto ready mix plaster works effectively on both even and uneven backgrounds, which means that this ready mix can be used for both fine surface finishing and thick base plastering as per the requirements. Mr Plasto Ready Mix Plaster made by Sand(Bajri) & Cement Ratio 5:1.

Features

• No wastage of water curing
• High Bond Strength
• No Crack
• Economical & Time Saving
• No solvent odour
• Fast Drying
• Premixed

Preparation & Application

• The application surface should be rigid, and free from oil, grease, paint or any other dirt particles.
• Dampen the wall before application of plaster.
• Pour 6-7 liters of potable water in a clean container and then add 1 bag (40 kg) of MR PLASTO Ready Mix Plaster.
• It can be mixed by hand. Use of mechanical mixer or electrical stirrer is recommended for better results.
• Mixing should be done for 5- 10 minutes depending upon the speed of the mixing equipment.
• Leave the mix to slake for 5- 10 min and remix before use.
• The mixture should be applied within one hour of preparation. If the concrete surface is smooth and dense, it's recommended that the surface is made rough for better sticking of the plaster layer.
• In normal weather, Mr PLASTO Ready Mix Plaster doesn't need watering for the first 24 hours. After the plaster is completely dry, curing should be done 2 - 3 times for 2 - 3 days. In abnormal weather conditions, curing for 5-7 days is required

Packing Details : 20 Kg, 40Kg.

We offer pure and flawlessly white Mr Plasto Plaster of Paris ( POP ). Mr Plasto is a superior quality Plaster of Paris ( POP ) as its manufacturing process includes many strong scientific tests. The major test is the calcium cooking process wherein each droplet of pure calcium sulphate is boiled at a predetermined temperature and the silica is separated. It makes Mr Plasto shrink less or crack less after drying. Mr Plasto P.O.P. covers more area with less material & after settling becomes strong thus it increases its longevity. Mr Plasto Plaster of Paris  is produced with isothermic micronic process, at predetermined temperature and controlled moisture.

Features & Advantages

• High Strength : High degree of compressive and tensile strength increases overall masonry and load-bearing capacity.
• Excellent Coverage : Due to lower density & higher volume, Mr Plasto covers 24 sqft / bag with a thickness of 13mm.
• Cracks Free Wall : Mr Plasto Plaster of Paris does not shrink or expand once setting process is complete. Hence, crack free walls are assured.
• Economical : Mr Plasto Plaster of Paris provides very smooth satin finish walls in single coat. Hence, saves money as well as time required for putty coating.
• Single Coat Application : It can be used directly on all internal surfaces like brickwork, hollow & solid concrete block.
• No Curing. Saves Water : Mr Plasto Plaster of Paris is self setting material hence once set does not need any more curing.
• High Thermal Insulation : R = 0.07 m2K/W at 13mm thickness.
• Faster Application : Its remarkable flowability allows faster MR PLASTO POP application. With the use of spray plaster machine, workability can be enhanced by 2 times.

Mr Plasto Pop Prepartion & Application

• The background to be plastered should be free from dust & loose mortar.
• For higher coverage pre wetting of background is recommended.
• For plaster mix, add gypsum to water not vice versa & water to MR PLASTO ratio should be 1:1.5.
• Stir the mixer with a mixing rod thoroughly.
• Prepare plaster mix which should not last more than 15 minutes.
• Do not mix additional dry material once the mix begins to set.
• A single coat should not exceed 13 mm, if more than 13 mm thickness desired than it can be done after drying of first layer.
• To enhance the workability plaster spray machine can be used.

Packing Details : 5KG / 25KG / 50KG

We are instrumental in manufacturing, exporting and supplying of Gypsum Boards from Rajasthan, India. We fabricate the Gypsum Boards in our fully equipped production unit under the guidance of professionals. To ensure customer satisfaction, our quality auditors check the Boards on various parameters before approving for delivery. Buyers in both national and international markets can rely on us for timely delivery of the Gypsum Boards.

Water Proofing Solution Water Proofing Solution Water Proofing Solution Water Proofing Solution

 

Services :

 

At MR PLASTO, we see ourselves as 'occupancy services experts'. This means transforming a bare shell into a ready-to-move-in office. An office that reflects our client's ideas, brand identity, current and future needs. Over the years, we have gone beyond addressing the needs of corporate offices to hospitals and hotels as well, and beyond interiors solutions to offer comprehensive fit out solutions that include networking, audio 'video systems, security systems, air-conditioning, electrical, plumbing, fire-fighting, and more

 

 

 

We also bring you a comprehensive portfolio of imported products such as carpets, chairs, soft seating, workstations, demountable partitions, acoustic panels, and more. Based on global trend-spotting, we introduce a new range every season. 
Most of these are European products, offering exceptional quality and high aesthetic value, and are ideal for use in offices, hotels and hospitals.
In most cases, these products are can be customized based on your specific need or the space available. Our products are characterized by exceptional comfort, design and ergonomics.

 

 

 

We Do :

 

-Small & Larger scale renovation

 

-Custom window covering design

 

-Space Planning: Furniture layout, integration and design; includes custom kitchen and bath layout & design

 

-Project buying & sourcing: Ranging from tile & stone, appliance & furniture, wall covering, window covering & fabric

 

-Design Consulting: Personal style consulting and room refresher services ; includes accessory style & acquisition and integration of individual items

 

-Project Management: Critical Path, Quality Control, Sub & Vendor Management

 

-Custom Furniture design: Individual Furniture items, kitchen & Bath cabinetry

 

-Personal shopping: Designer-guided shopping outings; includes retail shops, trade-only showrooms, flea

 

markets, estate sales

 

-Art acquisition: Identifying client's personal art style, shopping, sourcing and design integration

 

-Color consulting: Paint, Fabrics, art & accessories

 

-Organizational & storage solutions

 

-Renderings

 

 

 

Mr Plasto Wall Putty is a white cement based fine powder which provides an ideal base for concrete / cement plastered walls and ceilings. It gives you the most beautiful walls, is damp resistant and provides a smooth finish for further application of all kinds of paints. Its water repelling properties prevents flaking of your expensive paints. It is a perfect solution to cover the holes in the wall and make them look new again. The holes, cracks and imperfections can be very easily hidden with Mr Plasto wall putty before and after painting the walls. like it has a smooth and strong finish thus giving a fine and polished look to the walls. Mr Plasto Wall Putty is much better than ordinary putty as it becomes an integral part of the plaster due to its White Cement constitution. This gives better compatibility, adhesive-strength and a long-life to Mr Plasto Wall Putty.

Features :

• Highly Water Resistant
• Excellent Workability
• UV Resistance
• Smooth Finish
• Strong bonding
• Economical & easy to use

Mr Plasto Wall Putty Preparation & Application

• Apply Mr Plasto Wall Putty only on cement concrete/ cement plastered surfaces.
• Remove all dust /loose particles from the surface.
• Mix Mr Plasto Wall Putty powder with the water on desired consistency.
• Use Putty Blade to apply the Mr Plasto Wall Putty paste on prepared surface.
• Ideally 2coats with a maximum thickness of 1.5-2.5 mm are required for a smooth finish.
• Apply second coat only after the first coat is completely dry.
• Store Mr Plasto Wall Putty bag in dry place.
• Open the bag and inner liner only just before use.

Packaging : 5Kg, 20Kg, 40kg