Air Fly Softwares

Saidapet, Chennai, Tamil Nadu

Introduction:model232d is a kind of rs-232 system communication extending product. This type of product auto sense serial ratetransmission rate, no external power needed, optic electric isolation 2500v, be applicable in tough environment. Transmission distance at 9, 600bps is 2, 000m, stable performance. Model232d has 2500 volts of isolation twice the rating of most isolators to protect rs-232 equipment from lightning strikes, accidental high voltage shorts and ground loops.Features:1. Extend rs-232 signal 2km2. Plug-and-play3. Port-powered, lowest consumption4. Auto sense serial signal rate5. Isolation serial device(rs-232)6. 2500v isolation

1. Complies with ieee 802.3i, ieee 802.3u, ieee802.3x , ieee802.3ab , ieee802.1q , ieee802.1p standards

2. Supports ieee802.3afieee802.3at standards

3. Supports poe power up to 30w for each poe port, all power up to 380w

4. Supports manage the poe port, support poe port power on/off and port output power restriction

5. Support web interface management

6. 24 x 10/100/1000mbps auto mdi/mdi-x ethernet port, support ports auto mdi/mdix

7. 8k entry mac address table of the switch with auto-learning and auto-aging

8. Supports ieee802.3x flow control for full-duplex mode and backpressure for half-duplex mode

9. Supports qos (quality of service), port mirror, link aggregation protocol

10. Supports packet length 9216bytes jumbo frame packet forwarding at wire speed

11. Led indicators for monitoring pse, link / activity/speed

RACK2000A for Media converter adapt integration management media converter Rack in machine room. Each Rack have 14 insert slots, can insert 1-14 different media converters. Redundant Power Supply, support hot-swappable, provide credibility, high effect and economic solutions for network system. Features 1.Adopt insert-draw design, Easy to load and unload, Plug-and-play, support hot-swappable 2. 19 inch 2U, easy to install 3. Each Rack have 14 insert slots, can insert 1-14 different media converters, high capability, easy to upgrade 4. Full aluminums metal shell, high shield, high anti-jamming 5. Adopt auto-adapt technology. Do not adjust electrics and optics when installation 6. Redundant Power Supply, Low consumption, and credibility 7. Full working indicator light, easy to maintenance 8. Average no MTBF is up to 50 thousands, accord to telecom standard Specification Parameter Working Temperature???0C to 50C Storage Temperature???-40C to 85C Relative Humidity???5%95% Dimension???482.6mm350mm88mm(LWH) 19 Inch 2U Power supply Require Input???AC 100260V, 5060HZ, or DC -48V Out put???DC +5V Consumption??????60W Wave???50mv Noise???50mv Warranty: 5 years Approvals: FCC, CE, RoHS approvals

We are leading in manufacturing and supplier of industrial pcs in chennai, tamilnadu, india.Introduction:sw4485 is a rs-485 bus segmentation hub, specially designed for conforming to rs-485s large-scale system requirements under the complex electromagnetic environment. Its supporting transmission rates reach up to 115.2kbps. It adopts transparent transmission in both directions. It can convert 1 rs-485 or rs-232 to 4 rs-485, or transparently transmit any intersected rs-485 signal to rs-485 or rs-232 on pc. Each rs-485 port of its lower position controller has reverse fault alarm and protection function, through which, the network reliability of rs-485 has been improved, and the maintenance time of network has been shortened efficiently. In order to ensure the safety and reliability of data communication, the rs-485 interfaces of sw4485 are supplied with 2kvac isolation protection, 3 levels of esd protection and 2 levels of electrostatic radiation protection; they can prevent lighting, common ground and radiated interference, safe and reliable, are suitable for outdoor application.Sw4485 also provide star-rs485 bus connection. Users can easily improve the rs-485 bus structure, split network segment. You can design a unique and reliable rs-485 system through making reasonable use of sw4485.Sw4485 adopts emc protection design, supports wall-mounting and panel-mounting installation, and can be used at the harsh environment from -40 to 85.Features:1.support two rs-232 and rs-485 pc interfaces , and 4 rs-485 lower position controller ports2.support baud rate from 300bps to 115200bps3.each lower machine interface can be connected to 32 standard rs-485 devices(nodes)4.unique automatic circuit reverse alarm detection5.have automatic transceiver conversion function with zero delay6.support hot swap function, plug and play7.interface has 2kvac isolation protection, 8kv esd protection(contact discharge) and 2-stage radiation immunity8.industrial design, ip40 protection9.support din-rail and wall mounting installation.

Model1100, 10/100M Media Converter, provides a cost effective plug-and-play solution for long-range 10Base-T or 100Base-TX Ethernet extensions and added benefit of 10/100 auto-negotiation, making it the perfect choice when planning future upgrades of 10Base-T networks. Model1100 Ethernet Fiber converters are ultra-miniature in size and feature a shielded RJ45 Ethernet jack, SC/ST/FC style fiber-optic connections. Built-in auto-sensing capabilities enable full or half-duplex Ethernet operation with no configuration required! Features 1. Accord to IEEE802.1 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3 100Base-FX 2. MDI/MDI-X auto negotiation, 10M/100M auto negotiation 3. Supports full /half duplex, Point-to-point transparent transfer 4. Power External 5VDC input 5. Plug-and-play, easy to installation 6. Can insert to 2U 19", 14 slots Rackmount Specification Standards: comply with IEEE802.1 10Base-T, IEEE802.3u 100Base-TX, IEEE802.3 100Base-FX RJ45 port rate: 10/100Mbps auto negotiation Optic port rate: 100Mbps Working: Asynchronous, point to point Transfer distance: RJ45port: 100m Fiber optic:20, 40, 60, 80, 100, 120km(SM), 2 km(MM) optional RJ45 port cable: UTP 5E Fiber connector: SC, ST, FC optional Fiber optic cables: Single Mode:8.3/125, 8.7/125, 9/125 or 10/125 um Muti-Mode:50/125, 62.5/125 um Wavelength:850nm, 1310nm, 1550nm Power Power supply: External 5VDC input Consumption: 4W Environment Operating temp:-10C to 65C Storage temperature: -20 to 70C Operating humidity: 5% to 95%(no condensation) Appearance Dimensions: 94.071.026.0mm(external power supply) Shell: Iron Color: White Weight: 230g(external power supply) Warranty: 5 years Approvals: FCC, CE, RoHS approvals

Cost-effective and efficient method of extending a standard RS232 line is by using our RS232 Repeater. We are a distinguished Manufacturer, Supplier and Exporter of RS232 Repeater from Chennai. The extenders are powered from the RS232 Repeater port so no external power supply, flow control and drivers are required. It is simply a plug-and-play. The offered RS232 Repeater is used with industrial, commercial and general office computer devices.

 Features

• Extend RS-232 signal 2Km
• Plug-and-play
• Port-powered, lowest consumption
• Auto sense serial signal rate
• Isolation serial device(RS-232)
• 2500V isolation

 Specifications

• Performance parameter
  • Standard : EIA RS-232 standard
  • RS-232 signal : TXD, RXD, GND
  • Working : Asynchronous, point to point
  • Transfer rate : 300-115200bps, auto sense serial signal rate
  • Isolate signal : TXD, RXD, GND
  • Transfer distance : 2Km(9600bps)
  • Isolation : 2500V
  • Port type : DB9F, DB9M(wire)

• Power
  • Input powered : No power supply needed, powered from TXD, RTS, DTR signal in RS-232 port
  • Consumption : Static consumption less than 10mA, dynamic consumption less than 40mA

• Environment
  • Working environment : -40^oC to 85^oC
  • Storage temperature : -40^oC to 85^oC
  • Relative humidity : 5% to 95%

• Appearance
  • L×W×H : 90mm×33mm×16.5mm (DB9)
  • Shell : Plastic
  • Color : White
  • Weight : 30g (DB9)

 Warranty : 5 years

Approvals : FCC, CE, RoHS approvals

Our USB Hub adopts the unique equipotential differential isolation and bus division concentration technology. Our company is a prominent Manufacturer, Supplier and Exporter of USB Hub from Chennai.  We offer the USB Hub in all shapes, sizes and numerous powered ports. The offered USB Hub has auto-turnaround and no flow control is required. The Optical isolation of our USB Hub is 3000V. Customers can purchase the USB Hub at market leading rates.

Features

• 8 ports cards insert optical isolation RS485/422 HUB
• Star structure, bi-directional Converter RS232 to RS485/422 or RS485/422 repeater
• Reach up to 3000m at the rate of 9600bps
• 600W surge protection, 15KV ESD protection, built-in short circuit protection
• Each port 3000V optical isolation separately
• Support stage connection, each port support 256 nodes loopback
• Data direction auto-turnaround, no flow control is necessary

 

Specifications

• Standards : EIA RS-232C, RS-485, RS422 standard
• RS-232 signal : TX, RX, GND
• RS-422 signal : RS-485 signal: D+, D-, GND
• Working mode : Asynchronism, point to point, 2 wire half-duplex, 4 wire full duplex
• Baud rate : 300115200bps, auto test serial signal rate detect signal speed automatically, zero delay time
• Flow control : Data direction auto-turnaround, no flow control is required
• Transfer distance : RS-485/422 side:1.8Km(9600bps), RS-232 side: no less than 15m
• Loading : Support 256 nodes loopback
• Optical isolation : 3000V
• Port protection : 600W surge protection, 15KV ESD protection
• Connector : 5 bit terminal block

• Power
  • Power input : 220VAC
  • Consumption : 5W

• Environment
  • Operating temperature : -10oC to 60^oC 
  • Storage temperature : -40^oC to 85^oC
  • Humidity : 5% to 95%(no condensation)

• Appearance
  • Dimensions : 227.0mm×146.0mm×43.0mm 
  • Material : Plastic  
  • Color : Black  
  • Weight : 1000g

Warranty : 5 years

Approvals : FCC, CE, RoHS approvals