Air Fly Softwares

Saidapet, Chennai, Tamil Nadu

RS232 Fiber Optic Converter can work in the abominable and dangerous environment effectively. It carries transparent optical fiber modem for data transmission. RS232 Fiber Optic Converter is the best choice to connect RTU to HOST or SCADA controller. It adopts optic fiber transmit and has isolate protection and advanced data privacy feature. RS232 Fiber Optic Converter finds wide usage in various industrial controls, course controlling, traffic controlling and intellectual district, banks, electricity and interfering with environment department and systems with the special requirements.

Features

• Extend RS-232 transmission up to 120Km with single-mode
• Transmit asynchronously, point to point, speed reach 120Kbps
• Plug-and-Play(hot-pluggable, data format auto-sensing & self-adjusting)
• 600W surge protection, 15KV ESD protection
• Power External 5VDC

Specifications

• RS-232
• Standards : EIA RS-232C standard
• RS-232 signal : OUT(TX), IN(RX), GND
• Baud rate : 0115.2Kbps, auto test serial signal rate detect signal speed automatically, zero delay time
• Transfer distance : no less than 5m
• Port protect : 600W surge protection, 15KV ESD protection

Fiber Optic

• Connectors : SC, FC or ST, optional
• Fiber optic cables : Single Mode:8.3/125, 8.7/125, 9/125 or 10/125 um
• Muti-Mode : 50/125, 62.5/125 or 100/125 um
• Transmission : 20, 40, 60, 80, 100, 120km(SM), 2 km(MM) optional
• Wavelength : 850nm, 1310nm, 1550nm

Power

• Power input : Power External 5VDC
• Consumption : 120mA

Environment

• Operating temperature : -40^oC to 85^oC
• Storage temperature : -40^oC to 85^oC
• Humidity : 5% to 95%(no condensation)

Appearance

• Dimensions : 94.0×71.0×26.0mm(power external)
• Material : Iron(shell) 
• Color : White  
• Weight : 230g(power external), 260g(power internal)
• Warranty : 5 years
• Approvals : FCC, CE, RoHS approvals

Introduction: model277 is one kind can offer rs-232485422 serial port carry transparent optical fiber modem of transmission to get end to user, no need patch cords set up, switch over automatically, and can detect and examine the signal speed automatically, zero delays time to transmit automatically. model277 adopt optic fiber transmit, have isolate protection, data privacy is fine, working steady, data, such threats to communication equipment as the wave is welled up and interfered with electromagnetically that the effective one has prevented the abominable environment from being struck by lightning, can work in the abominable and dangerous environment reliably.Can be used in occasions such as various industrial control, course controlling, traffic controlling and intellectual district , especially suit the bank, electricity and interfering with environment department and system with the special requirement electromagnetically. Features:1. Extend rs-232485422 transmission up to 120km with single-mode2. Transmit asynchronously, point to point, speed reach 500kbps3. Examine signal speed automatically, zero delay time 4. Plug-and-play(hot-pluggable, data format auto-sensing & self-adjusting)5. Support rs-232485422 interface type, but only one rs-232 rs-485 rs-422 port can be connected at a given time6. 936vdc power supply input(2 bit terminal block)specifications:rs-232485422standards: eia rs-232c, rs-485, rs422 standardrs-232 signal: out(tx), in(rx), gndrs-422 signal: t+, t-, r+, r-, gndrs-485 signal: d+, d-, gndworking mode: asynchronism, point to point or multi point, 2 wire half-duplex, 4 wire full duplexbaud rate:0115.2kbps, auto test serial signal rate detect signal speed automatically, zero delay timetransfer distance: rs-485422 side:1.2km(9600bps)rs-232 side: no less than 5mmax number of drops: 128 nodes(rs-485422)

RS485/422 Fiber Optic Converter carries transparent optical fiber modem for data transmission, no need patch cords set up and can detect and examine the signal speed automatically. It adopts optic fiber transmit, has isolate protection and data privacy features. RS485/422 Fiber Optic Converter can work in the abominable and dangerous environment effectively. RS485/422 Fiber Optic Converter is used in different sectors such as various industrial controls, course controlling, traffic controlling and intellectual district, banks, electricity and interfering with environment department and system with the special requirements.

Features

• Extend RS-485/422 transmission up to 120Km with single-mode
• Transmit asynchronously, point to point, speed reach 500Kbps
• Examine signal speed automatically, zero delay time
• Plug-and-Play(hot-pluggable, data format auto-sensing & self-adjusting)
• Power External 5VDC
• 600W surge protection, 15KV ESD protection

Specifications

• RS-485/422
• Standards : EIA RS-485, RS422 standard
• RS-422 signal : T+, T-, R+, R-, GND
• RS-485 signal : D+, D-, GND
• Working mode : Asynchronism, point to point or multi point, 2 wire half-duplex, 4 wire full duplex
• Baud rate : 300500Kbps, auto test serial signal rate detect signal speed automatically, zero delay time
• Transfer distance : RS-485/422 side:1.2Km(9600bps)
• Max number of drops : 128 nodes(RS-485/422)
• Port protect : 600W surge protection
• 15KV ESD protection

Fiber Optic

• Connectors : SC, FC or ST, optional
• Fiber optic cables : Single Mode:8.3/125, 8.7/125, 9/125 or 10/125 um
• Muti-Mode : 50/125, 62.5/125 or 100/125 um
• Transmission : 20, 40, 60, 80, 120km(SM),
• 2 km(MM) optional
• Wavelength : 850nm, 1310nm, 1550nm

Power

• Power input : Power External 5VDC
• Consumption : 120mA

Environment

• Operating temperature : -10^oC to 60^oC
• Storage temperature : -40^oC to 85^oC
• Humidity : 5% to 95%(no condensation)

Appearance

• Dimensions : 94.0×71.0×26.0mm(power external)
• Material : Iron(shell)
• Color : White
• Weight : 230g(power external)
• Warranty : 5 years
• Approvals : FCC, CE, RoHS approvals

RS232/485/422 Fiber Optic Converter has RS-232/485/422 serial port that carries transparent optical fiber modem for data transmission and no need patch cords set up. The salient attributes of RS232/485/422 Fiber Optic Converter are it switches over automatically, can detect and examine the signal speed automatically, zero delays time to transmit automatically. It has isolate protection, data privacy feature and can work in the abominable and dangerous environment effectively. RS232/485/422 Fiber Optic Converter is used in various industrial controls, course controlling, traffic controlling and intellectual district, electricity and interfering with environment department and system with the special requirements.

 

Features

• Extend RS-232/485/422 transmission up to 120Km with single-mode
• Transmit asynchronously, point to point, speed reach 500Kbps
• Examine signal speed automatically, zero delay time
• Plug-and-Play(hot-pluggable, data format auto-sensing & self-adjusting)
• Support RS-232/485/422 interface type, but only one RS-232/ RS-485/ RS-422 port can be connected at a given time
• 936VDC power supply input(2 bit terminal block)

Specifications

• RS-232/485/422
• Standards : EIA RS-232C, RS-485, RS422 standard
• RS-232 signal : OUT(TX), IN(RX), GND
• RS-422 signal : T+, T-, R+, R-, GND
• RS-485 signal : D+, D-, GND
• Working mode : Asynchronism, point to point or multi point, 2 wire half-duplex, 4 wire full duplex
• Baud rate:0115.2Kbps, auto test serial signal rate detect signal speed automatically, zero delay time
• Transfer distance : RS-485/422 side:1.2Km(9600bps)
• RS-232 side : no less than 5m
• Max number of drops : 128 nodes(RS-485/422)
• Port protect : 600W surge protection
• 15KV ESD protection

Fiber Optic

• Connectors : SC, FC or ST, optional
• Fiber optic cables : Single Mode:8.3/125, 8.7/125, 9/125 or 10/125 um
• Muti-Mode:50/125, 62.5/125 or 100/125 um
• Transmission : 20, 40, 60, 80, 100, 120km(SM),
• 2km(MM) optional
• Wavelength : 850nm, 1310nm, 1550nm

Power

• Power input : 936VDC power input(2 bit terminal block)
• Consumption : 120mA

Environment

• Operating temperature : -40^oC to 85^oC
• Storage temperature : -40^oC to 85^oC
• Humidity : 5% to 95%(no condensation)

Appearance

• Dimensions : 100.0mm×69.0mm×22.0mm
• Material : Iron(shell)
• Color : White
• Weight : 230g
• Warranty : 5 years
• Approvals : FCC, CE, RoHS approvals

We offer CAN to Fiber optic converter.Introduction:MC201 is a CAN bus to fiber converter. It designs specially to deal with the short transmission distance of CAN bus, the subjection to electromagnetic interference and other issues. CAN bus transfer to fiber is able to provide the user with transparent data transmission of CAN bus to fiber. It is working in pairs, is more convenient to put the CAN signal revert to the CAN signal through fiber transmission.MC201 serial converter integrates an optical interface and a 2KVAC electrically isolated CAN bus interface, is able to receivestoretransmit different rates between 2 CAN network data. CAN bus interface of MC201 supports various of standard communication baud rate recommended by CiA, is capable for detecting and matching automatical baud rate and defining baud rate by user, the baud rate ranges from 2.5Kbps to 1Mbps; it can connect external termination resistors at the same time.Its single-model fiber interface can be used in high-interference environment and has concentrated energy , which is more suitable for long-distance transmission , is better to extend the network communication distance.MC201 adopts EMC protection design, supports wall and panel mounting. It can be used at the harsh environment from -40 to 85.Features:1.Support CAN2.0A and CAN2.0B protocol, conform to the ISODIS 118982.Integrate1 UTD CAN interface and 1 optical interface3.CAN interface supports auto-detect baud rate and user-definedbaud rate, the baud rate matches the range of 2.5k1Mbps4.Support optic fiber transmit CAN network data5.Extend transmission distance to 15 KM6.CAN interface has electrical isolation protection with 2KVACisolation voltage; Supports 8KV ESD protection(air discharge)7.Port Data Throughput: 1000fps8.Optional installation of external termination resistors9.Industrial design, IP40 protection10.Support DIN-Rail and wall mounting installation11.Working Temperature: -4085

We offer 2 port 100base-fx+4 channel rs-485 redundancy ring rs485 to fiber conv.Introductionimf204-2f-4di(rs-485)-p(5vdc) is a high performance, unmanaged, redundancy ring rs485 to fiber converter, it used in industry application. It supports point to point two fiber port backup for each other, fiber line(ring) transmission, supports 4 channel rs-485(rs-485 adopted 5 bits terminal block) and 2 port 100base-fx fiber port, meantime, 2 fiber port support redundancy ring function, network fault recovery time20ms, it can easy and convenience manage the disperse serial device, main engine through serial port, take the intelligent redundancy for your network.It has high performance exchange engine, low consumption design, 3 different type power supply input and overload current and voltage protection. It special designed for industry high available data communication in power automation, industry automation, transportation, telecommunication area etc.It supported wall mounting and rack mount installation, easy to use for your project.Features1.support 4 channel rs-4852.support 2 port 100base-fx fiber3.support dual(single) ring line, stscfc optional 4.support redundancy ring, recovery time20ms5.support 0bps115200bps6.support windows serial driver procedure format7.provide windows configuration tools, easy to use and install in bath8.support 3 types power supply input9.industry grade design, ip30 protection level10.no fan, low consumption design11.working temperature:-10-7012.storage temperature: -10-70