Air Fly Softwares

Saidapet, Chennai, Tamil Nadu

We are leading in manufacturing and supplier of 8 Port Ethernet Converters in Chennai, Tamilnadu, India. Introduction: NP308 series can conveniently connect up to 8 serial devices to an Ethernet, allowing you to network your existing serial devices with only basic configuration. With NP308 series, you can both centralize the management of your serial devices, and distribute management hosts over the network. NP308 series can be used to connect different devices for remote management, each serial port operates independently to provide maximum versatility, each port can be operate in Driver, TCP Server, and TCP Client mode independently. Features: 1. Adopt 32 bit ARM processor, 125 DMIPS manage ability 2. 8 serial ports, with support for RS-232/RS-485/RS-422 3. Support 10/100M Ethernet 4. Support 300bps-460.8Kbps 5. Support TCP, UDP, ARP, ICMP, HTTP, TELNET and DHCP protocol 6. Support across gateway, router communication 7. Support standard TCP/IP SOCKET 8. Support Virtual serial driver access and auto connect after the network disconnect 9. Choice of configuration methods: Windows, TELNET and WEB 10. Support DIN-Rail or wall mounting installation Specifications: Ethernet Number of ports:1 Standard:10/100Base-T(X) Speed:10/100M auto-sensing Working mode: half /full duplex Working: TCP Server, TCP Client, UDP and Real COM driver Memory: Most 32Kbyte Transmission: 100m Electromagnetism isolate: 1KV Connector: RJ45 Serial Standard: RS-232/RS-485/RS-422 Number of ports:8 Signals: RS-232:DCD, RXD, TXD, DTR, GND, DSR, RTS, CTS RS-485:Data+, Data-, GND RS-422:TXD+, TXD-, RXD+, RXD-, GND Parity: None, Even, Odd, Space, Mark Data bits: 5bit, 6bit, 7bit, 8bit Stop bits: 1, 1.5, 2 Baud rate: 300bps 460.8Kbps Flow control: RTS/CTS or XON/XOFF Direction control: RS485 side adopt ADDC technology, auto text and control data transfer direction Loading: RS-485/422 side support 32 nodes (customize 128 nodes) loopback Transmission: RS-485/422 side 1200M,

We are leading in manufacturing and supplier of 16-Port RS232/485/422 to Ethernet Converter in Chennai, Tamilnadu, India. For the miscellaneous requirements of our clients, we are engaged in offering a range of 16-Port RS232/485/422 to Ethernet Converter. Specifications: Ethernet: Number of ports:1(NP31 6E:2) Standard:10/100Base-T(X) Speed:10/100M auto-sensing Working mode: half /full duplex Working: TCP Server, TCP Client, UDP and Real COM driver Memory: Most 32Kbyte Transmission: 100m Electromagnetism isolate: 1KV Connector: RJ45 Serial: Standard: RS-232/RS-485/RS-422 Number of ports:16 Signals: RS-232:DCD, RXD, TXD, DTR, GND, DSR, RTS, CTS RS-485:Data+, Data-, GND RS-422:TXD+, TXD-, RXD+, RXD-, GND Parity: None, Even, Odd, Space, Mark Data bits: 5bit, 6bit, 7bit, 8bit Stop bits: 1, 1.5, 2 Baud rate: 300bps 460.8Kbps Flow control: RTS/CTS or XON/XOFF Direction control: RS485 side adopt ADDC technology, auto text and control data transfer direction Loading: RS-485/422 side support 32 nodes (customize 128 nodes) loopback Transmission: RS-485/422 side 1200M, RS-232 port 15M Interface protection1500W surge protection, 15KV ESD protection Software: Network protocols: Support TCP, UDP, ARP, ICMP, HTTP, TELNET and DHCP Driver support: Windows Real COM driver(Windows NT/2000, Windows XP/2003) Configuration options: Windows, TELNET and WEB Power: Power input: AC/DC 85265V Consumption:

We are main supplier of this product.

We are leading in manufacturing and supplier of RS232 to Ethernet Converter in Chennai, Tamilnadu, India. Introduction: serial device server is designed to make your serial devices internet ready instantly. It provides 1 port RS232/485/422 (RS232, DB9M; RS485/422, 5 bit terminal block) and 1 port 10/100Base-T(X).It makes them ideal choice for connecting decentral serial devices and Host computer to an IP based Ethernet, making it easily and conviniently for your management. Its software can be setting and updating by serial program group in the application. It supports TCP, UDP, ARP, ICMP, DHCP and Windows Native COM, LLF functions. What's more, NP301 serial devices server provides powerful management configuration tools based on Windows, guiding users configuration of the devices step by step. All configurations can be done by network and serial port, supporting communication across gateway and router. In addition, it allows users to configurate flexibly IP address, Server or Client mode, size of packet, etc. NP301 serial device sever is designed with EMC protection, and power supply have overcurrent and overvoltage protection. These make it woking stably in hazardous environment. Easy wall and DIN-Rail mounting.

We are leading in manufacturing and supplier of Serial To Ethernet Converters in Chennai, Tamilnadu, India. Introduction: Serial To Ethernet Converterse is designed to make your Serial To Ethernet Converterse internet ready instantly. It provides 1 port RS232/485/422 (RS232, DB9M; RS485/422, 5 bit terminal block) and 1 port 10/100Base-T(X).It makes them ideal choice for connecting decentral Serial To Ethernet Converterse and Host computer to an IP based Ethernet, making it easily and conviniently for your management. Its software can be setting and updating by serial program group in the application. It supports TCP, UDP, ARP, ICMP, DHCP and Windows Native COM, LLF functions. What's more, Serial To Ethernet Converterse provides powerful management configuration tools based on Windows, guiding users configuration of the devices step by step. All configurations can be done by network and serial port, supporting communication across gateway and router. In addition, it allows users to configurate flexibly IP address, Server or Client mode, size of packet, etc. Serial To Ethernet Converterse is designed with EMC protection, and power supply have overcurrent and overvoltage protection. These make it woking stably in hazardous environment.

We are the main supplier of this product.

Technical specifications: all in one converter it can convertethernet to zigbeeethernet to rs-485ethernet to rs-422rs-232 to zigbeers-232 to rs-485industry ethernet with modbustcpip protocolrs232, rs485, zigbee with modbus protocolrs485 port can attach 254 slave rs485 devicethe maximum zigbee communication distance up to 3000 metersthe zigbee radio can configure as master, terminal and repeatercan build zigbee network with thousands zigbee products by setup zigbee wireless signal channel and device addressa lot of spare flash can be used to store users parametersa lot of ramrom can use to add more featurescan update firmware through rs23 port by userleds indicate each port and system work statusintegrate clock can do some schedule according to user requirementdin rail support available.

Introduction:model7211 bridge provides easy conversion from itu-t g.703 e1 channel to ethernet interface. Can used widely in connecting between wan and lan, monitoring, etc. The ethernet interface is 10100mbps auto negotiation and can be fullhalf duplex. The e1 is transparent and in full rate, which can support the e1 unframed mode, including fractional e1 per request. A pair of model7211 offer a cost effective solution for using existing e1 leased lines for transparent ethernet service. Local management of the model7211 converter is provided via dip switches. Front panel leds monitor the g.703 link, ethernet lan and serial ports for status and loss of sync. Model7211 compact g.703 access converter provides e12.048 mbps network termination as well as serial or ethernet lan interface conversion in a standalone or rack mount package. Model7211 terminates the g.703 telco interface and converts the data for transmission to a user-oriented 10100baset(x) interface.Features:1.using e1 line transparent transfer ethernet data2.support local clock and line clock3.support pretend random coding loop test4.e1(g.703)interface support 120ohm(rj-45)and 75ohm(bnc double coaxial)5.ethernet mac address percolate function6.support vlan over length data bag7.ethernet port support 10m100m full-duplexhalf-duplex specifications:e1 interfacestandard: comply with itu-t g.703output tingle displace: accord itu-tg.735 adviceinput tingle limit: accord itu-tg.823 adviceoutput tingle: accord itu-t g.823 adviceframe format: unframedinterface rate: 2.048mbpscrc checkout: noport coding: hdb3port transmission: 2km port protection: 1500v electromagnetism isolate port connector: 120 ohm(rj-45) and 75 ohm(bnc double coaxial)ethernet portinterface types: 10100baset, fullhalf duplexstandards compliance: ieee 802.3bit rate: 10100baset limited to max 2.048 mbpsconnectors: rj45 (10100 base-t electrical)

Introduction
IMC101GT-1GF is a kind of industrial gigabit media converter, it support 1 10Base-T/100Base-TX/1000 Base-TX port and 1 1000Base-FX Fiber port. It support LFP function, it is easy to check the network connection status, it also support CE, FCC standard, IMC101-GF adopt industry standard design, IP40 protection, rugged high-strength metal case, power supply input(12V48VDC), -40 to 85C working temperature.
Features
1.Support 1 10Base-T/100Base-TX/1000 Base-TX port and 1 1000Base-FX port
2.Support IEEE802.3/802.3u/802.3x/802.3z, store and forward
3.Ethernet port support 10/100/1000M self-adaption
4.Support LFP (Link Fault Pass-Through)
5.DC1248V power input, reverse connection protection
6.IP40 protect grade, high strength iron shell, DIN Rail installation

Specification
Technology:
Standard: IEEE802.3, IEEE802.3u, IEEE802.3x, IEEE802.3z
Flow control: IEEE802.3x, back pressure control
Interface:
Gigabit Ethernet port:10Base-T/100Base-TX/1000Base-TX Self-adaption
Gigabit fiber port: 1000Base-F(SC/FC/ST)
Transmission:
Twisted pair: 100M (Standard CAT5/CAT5e cable)
Multi mode fiber: 1310nm, 500m
Single mode fiber: 1310nm, 20/40/60Km
1550nm, 20/40/60/80/100/120Km
Exchange of attribute:
100M forward speed: 148810pps
1000M forward speed: 1488100pps
Transmission: Store and forward
Memory: 1Mbits
MAC address: 1K
LED Indicator:
System: RUN
Ethernet port: G1 LINK
Fiber port: G2 LINK
Remote Ethernet port alarm: G1 LFP
Remote Fiber port alarm: G2 LFP
Power supply:
Power input: 24VDC(1248VDC)
Terminal block: 3 bits 7.62mm terminal block
No-load power consumption:1.512W@24VDC
Full-load power consumption: 1.800W@24VDC
Support reverse connection protection
Mechanical:
Shell: IP40, high strength iron shell.
Installation: DIN Rail
Weight: 346.6g
Dimension(WHD): 110mm35mm95mm
Environmental:
Operating Temperature: -40 to 85C
Storage Temperature: -45C to 85C
Ambient Relative Humidity:
10 to 95% (non-condensing)
Standard:
EMI: FCC Part 15, CISPR (EN55022) class A
EMS: EN61000-4-2 (ESD), Level 1
EN61000-4-4 (EFT), Level 4
EN61000-4-5 (Surge), Level 3
Shell: IEC 60068-2-27
Warranty:
Warranty time: 5 years
Certification
CE, FCC, RoHS, PAL, UL508(pending)