GW1102-2D(RS-485) is an industrial Ethernet Modbus gateway that converts between Modbus TCP and Modbus RTU/ASCII protocols. It provides 2 port RS-485/422 serial (5 bit terminal block) and 1 port 10/100M Ethernet.Modbus TCP, Modbus RTU and Modbus ASCII protocol are integrated in the products, users can easily realize the seamless integration of Modbus Ethernet devices and Modbus serial devices and even multi master and slave hybrid networks. At the same time, the user can be set up by Web or Telnet. The simple design can not only realize the fast application, but also guarantee the application of the entire real industrial environment.The products using EMC protection design, can work in rugged environment.

1.Support Modbus TCP, Modbus RTU, Modbus ASCII, IP, ARP, DHCP and DNS protocol2.Support 1 port 10/100M Ethernet3.Support 2 Port RS-485/4224.Support WEB and Telnet configuration5.Convert between Modbus TCP and Modbus RTU/ASCII6.Support RTU Slave, RTU Master, ASCII Slave, ASCII Master four operating modes7.Support ID mapping function, to achieve the management of the host ID8.300bps115200bps baud rate and nonblocking communication9.Support IP address and MAC address filtering function10.Slave mode support 16 TCP master connections11.Master mode support 32 slave TCP connection requests12.Support Response Timeout and Interval Timeout setting13.Support cross-gateway and cross-router communication14.IP30 protection grade, metal shell, wall mounted installation15.No fan, low consumption design16.Working temperature: -4075

Ethernet portStandard: 10Base-T, 100Base-TXProtocol: Support Modbus TCP, Modbus RTU, Modbus ASCII, IP, APR, ICMP, DNS and DHCPSignal: Rx+, Rx-, Tx+, Tx-Speed: 10/100MbpsWorking: Full-duplex and half duplexTransfer distance: 100mConnector: RJ45Serial portSerial port number: 2 ports RS-485/422RS-485 signal: D+ (A), D- (B)RS-422 signal: T+, T-, R+, R-Parity bit: None, Even, Odd, Space, MarkData bit; 7bit, 8bitStop bit: 1bit, 2bitBaud rate: 300bps115200bpsRS-485/422 transfer distance: 1200mRS-485/422 connector: 5 bits terminal blockProtection: class 3 staticMaster mode: 32 TCP slavesSlave mode: 16 TCP mastersWork mode: RTU Slave, RTU Master, ASCII Slave, and ASCII MasterLED IndicatorPower (PWR)Ethernet port connect status (Link)Serial port data indicator: TX1TX2, RX1RX2;Power requirementsInput voltage: 948VDCNo-load consumption: 0.90W@9VDCFull-load consumption: 1.25W@9VDCEnvironment limitsWorking temperature: -4075Storage temperature: -4085Relative humidity: 5%95%non-condensingMechanicalShell: IP30 protection, metal shellInstallation: Wall mountingWeight: 250gSize (LWH): 100mm69mm22mmStandardEMI: EN 55022 Class A, FCC Part 15 Subpart B Class AEMS: EN 61000-4-2 (ESD), Level 3Shock: IEC 60068-2-27Free fall: IEC 60068-2-32Vibration: IEC 60068-2-6
WarrantyWarranty time: 3 yearsCertificatesCE, FCC, RoHS, UL508 (pending)Packing List1. GW1102-2D(RS-485)-P(948VDC) 12. User manual 13. Straight network cable 14. Power adapter 15. CD 16. Warranty card 17. Certificate of quality1Optional accessories:DIN-Rail Mounting Kit (35mm) 1

Interfaces

* Mobile Ports: 32 ports GSM/CDMA channels

* Two(2) 10/100Mbps Ethernet Interface (2xRJ45)

* USB: 1 port

Voice Processing

* Voice Codec: G.711a/u law, G.723.1, G726, G.729AB

* QoS: Diff Serve, ToS, VAD, PLC, CNG

Call Features

* Calling Type: Terminate/Originate calls

* IVR Voice Prompt: Two stage dialing, Customized IVR

* Call handling: One stage dialing, Configurable dial plan

* DTMF: RFC2833, SIP

Mobile Features

* General Feature: SMS, USSD, IMEI/PIN modify, Call minutes restriction, Carrier select, BCCH, Reversal Polarity Network

* Network Mode: NAT router or switch mode

* Network Protocols: IP, TCP, UDP, TFTP, FTP, RTP, RTCP, ARP, RARP, ICMP Ping, NTP, SNTP, Http, DNS, PPPoE, DHCP

* NAT traversal: Static NAT, STUN

Protocal

* Protocol: SIP V2.0 RFC3261

* SIP Characteristics: By port/device registration, Two 183 mode

Configuration Management

* Management: TFTP, HTTP, Sys log, CDR

* Web GUI: Configuration, firmware upgrade, call status, Configuration backup/restore

Hardware Specifications

* Power Supply:AC100240V 50/60HZ DC12V/1A

* Temperature: 040 (Operation), -2080 (storage)

* Humidity: 5%90% RH,

* Power Consumption: 35W

* Dimensions: 440(W) x 250(D) x 230(H) mm

* Net weight: 7.0kg

GW1102-2D(RS-232) is an industrial Ethernet Modbus gateway that converts between Modbus TCP and Modbus RTU/ASCII protocols. It provides 2 port RS-232 serial (RJ45) and 1 port 10/100M Ethernet.
Modbus TCP, Modbus RTU and Modbus ASCII protocol are integrated in the products, users can easily realize the seamless integration of Modbus Ethernet devices and Modbus serial devices and even multi master and slave hybrid networks. At the same time, the user can be set up by Web or Telnet. The simple design can not only realize the fast application, but also guarantee the application of the entire real industrial environment.
The products using EMC protection design, can work in rugged environment.

GW1102-2D(RS-485) is an industrial Ethernet Modbus gateway that converts between Modbus TCP and Modbus RTU/ASCII protocols. It provides 2 port RS-485/422 serial (5 bit terminal block) and 1 port 10/100M Ethernet.Modbus TCP, Modbus RTU and Modbus ASCII protocol are integrated in the products, users can easily realize the seamless integration of Modbus Ethernet devices and Modbus serial devices and even multi master and slave hybrid networks. At the same time, the user can be set up by Web or Telnet. The simple design can not only realize the fast application, but also guarantee the application of the entire real industrial environment.The products using EMC protection design, can work in rugged environment.

1.Support Modbus TCP, Modbus RTU, Modbus ASCII, IP, ARP, DHCP and DNS protocol2.Support 1 port 10/100M Ethernet3.Support 2 Port RS-485/4224.Support WEB and Telnet configuration5.Convert between Modbus TCP and Modbus RTU/ASCII6.Support RTU Slave, RTU Master, ASCII Slave, ASCII Master four operating modes7.Support ID mapping function, to achieve the management of the host ID8.300bps115200bps baud rate and nonblocking communication9.Support IP address and MAC address filtering function10.Slave mode support 16 TCP master connections11.Master mode support 32 slave TCP connection requests12.Support Response Timeout and Interval Timeout setting13.Support cross-gateway and cross-router communication14.IP30 protection grade, metal shell, wall mounted installation15.No fan, low consumption design16.Working temperature: -4075

Ethernet portStandard: 10Base-T, 100Base-TXProtocol: Support Modbus TCP, Modbus RTU, Modbus ASCII, IP, APR, ICMP, DNS and DHCPSignal: Rx+, Rx-, Tx+, Tx-Speed: 10/100MbpsWorking: Full-duplex and half duplexTransfer distance: 100mConnector: RJ45Serial portSerial port number: 2 ports RS-485/422RS-485 signal: D+ (A), D- (B)RS-422 signal: T+, T-, R+, R-Parity bit: None, Even, Odd, Space, MarkData bit; 7bit, 8bitStop bit: 1bit, 2bitBaud rate: 300bps115200bpsRS-485/422 transfer distance: 1200mRS-485/422 connector: 5 bits terminal blockProtection: class 3 staticMaster mode: 32 TCP slavesSlave mode: 16 TCP mastersWork mode: RTU Slave, RTU Master, ASCII Slave, and ASCII MasterLED IndicatorPower (PWR)Ethernet port connect status (Link)Serial port data indicator: TX1TX2, RX1RX2;Power requirementsInput voltage: 948VDCNo-load consumption: 0.90W@9VDCFull-load consumption: 1.25W@9VDCEnvironment limitsWorking temperature: -4075Storage temperature: -4085Relative humidity: 5%95%non-condensingMechanicalShell: IP30 protection, metal shellInstallation: Wall mountingWeight: 250gSize (LWH): 100mm69mm22mmStandardEMI: EN 55022 Class A, FCC Part 15 Subpart B Class AEMS: EN 61000-4-2 (ESD), Level 3Shock: IEC 60068-2-27Free fall: IEC 60068-2-32Vibration: IEC 60068-2-6
WarrantyWarranty time: 3 yearsCertificatesCE, FCC, RoHS, UL508 (pending)Packing List1. GW1102-2D(RS-485)-P(948VDC) 12. User manual 13. Straight network cable 14. Power adapter 15. CD 16. Warranty card 17. Certificate of quality1Optional accessories:DIN-Rail Mounting Kit (35mm) 1

Interfaces

* Mobile Ports: 32 ports GSM/CDMA channels

* Two(2) 10/100Mbps Ethernet Interface (2xRJ45)

* USB: 1 port

Voice Processing

* Voice Codec: G.711a/u law, G.723.1, G726, G.729AB

* QoS: Diff Serve, ToS, VAD, PLC, CNG

Call Features

* Calling Type: Terminate/Originate calls

* IVR Voice Prompt: Two stage dialing, Customized IVR

* Call handling: One stage dialing, Configurable dial plan

* DTMF: RFC2833, SIP

Mobile Features

* General Feature: SMS, USSD, IMEI/PIN modify, Call minutes restriction, Carrier select, BCCH, Reversal Polarity Network

* Network Mode: NAT router or switch mode

* Network Protocols: IP, TCP, UDP, TFTP, FTP, RTP, RTCP, ARP, RARP, ICMP Ping, NTP, SNTP, Http, DNS, PPPoE, DHCP

* NAT traversal: Static NAT, STUN

Protocal

* Protocol: SIP V2.0 RFC3261

* SIP Characteristics: By port/device registration, Two 183 mode

Configuration Management

* Management: TFTP, HTTP, Sys log, CDR

* Web GUI: Configuration, firmware upgrade, call status, Configuration backup/restore

Hardware Specifications

* Power Supply:AC100240V 50/60HZ DC12V/1A

* Temperature: 040 (Operation), -2080 (storage)

* Humidity: 5%90% RH,

* Power Consumption: 35W

* Dimensions: 440(W) x 250(D) x 230(H) mm

* Net weight: 7.0kg

GW1102-2D(RS-232) is an industrial Ethernet Modbus gateway that converts between Modbus TCP and Modbus RTU/ASCII protocols. It provides 2 port RS-232 serial (RJ45) and 1 port 10/100M Ethernet.
Modbus TCP, Modbus RTU and Modbus ASCII protocol are integrated in the products, users can easily realize the seamless integration of Modbus Ethernet devices and Modbus serial devices and even multi master and slave hybrid networks. At the same time, the user can be set up by Web or Telnet. The simple design can not only realize the fast application, but also guarantee the application of the entire real industrial environment.
The products using EMC protection design, can work in rugged environment.