Write a Review
Our Products
Stone Floor Tiles
2 Products availableWall Tiles
1 Products availableLeading Manufacturer, Supplier & Retailer of Marble Stone, interlocking blocks, Permeable Paver, zig zag tiles and flooring tiles.
Specifications
|
Description |
Ultra designer tiles |
heavy duty vitrified tiles |
|
Range |
Floor, wall, step & raiser |
generally floor |
|
Color |
20 colors with special cloudy effect. Available from light colors to bright colors |
Only maximum 3 colors available. Generally dull by nature |
|
Designs |
Various shapes with interlocking, combo tiles are available in different textures |
Generally in square in size of 300x300 or 200x200 |
|
impact resistance |
If sharp and heavy articles falls on laid ultra tiles, physically only small area chipping may occur |
poor impact resistance. The tiles may break in pieces and come out from the bonding |
|
Skid resistance |
As per ASTM E303 minimum requirement, for antiskid is 25 BPN whereas ultra more than 80 BPN coefficient of friction for skid resistance is > 0.8 |
Vitrified tiles as per standard requirement should be> 0.40 in coefficient of friction of skid resistance is far below than ultra-designer tiles |
|
Hardness (MOH's) |
> 6.0 |
>6.0 |
|
Breaking strength |
Ultra-designer tiles is >2850 N |
Generally it is > 1300 N |
|
Abrasion resistance |
generally 1.4 to 1.6 whereas, maximum allowed as per ISO standard for heavy duty tiles is 2.5 |
Generally this test of loss in thickness is done as per the ISO 1237 and it should be less than 175 mm cube (as per ISO 4457-2007) |
|
Density (gm/cc) |
>2.5 |
>2.0 |
|
Color Fastness |
No color change |
No color change |
|
Cost |
generally less than Rs 50/- per Sq ft. |
heavy duty exterior grade cost more than rs 85/- per sq ft |
|
Bondage with cement |
Cement to cement is very good |
Bonding for exterior is weak |
Specifications
|
Description |
Ultra designer tiles |
heavy duty vitrified tiles |
|
Range |
Floor, wall, step & raiser |
generally floor |
|
Color |
20 colors with special cloudy effect. Available from light colors to bright colors |
Only maximum 3 colors available. Generally dull by nature |
|
Designs |
Various shapes with interlocking, combo tiles are available in different textures |
Generally in square in size of 300x300 or 200x200 |
|
impact resistance |
If sharp and heavy articles falls on laid ultra tiles, physically only small area chipping may occur |
poor impact resistance. The tiles may break in pieces and come out from the bonding |
|
Skid resistance |
As per ASTM E303 minimum requirement, for antiskid is 25 BPN whereas ultra more than 80 BPN coefficient of friction for skid resistance is > 0.8 |
Vitrified tiles as per standard requirement should be> 0.40 in coefficient of friction of skid resistance is far below than ultra-designer tiles |
|
Hardness (MOH's) |
> 6.0 |
>6.0 |
|
Breaking strength |
Ultra-designer tiles is >2850 N |
Generally it is > 1300 N |
|
Abrasion resistance |
generally 1.4 to 1.6 whereas, maximum allowed as per ISO standard for heavy duty tiles is 2.5 |
Generally this test of loss in thickness is done as per the ISO 1237 and it should be less than 175 mm cube (as per ISO 4457-2007) |
|
Density (gm/cc) |
>2.5 |
>2.0 |
|
Color Fastness |
No color change |
No color change |
|
Cost |
generally less than Rs 50/- per Sq ft. |
heavy duty exterior grade cost more than rs 85/- per sq ft |
|
Bondage with cement |
Cement to cement is very good |
Bonding for exterior is weak |
Specifications
|
Description |
Ultra designer tiles |
heavy duty vitrified tiles |
|
Range |
Floor, wall, step & raiser |
generally floor |
|
Color |
20 colors with special cloudy effect. Available from light colors to bright colors |
Only maximum 3 colors available. Generally dull by nature |
|
Designs |
Various shapes with interlocking, combo tiles are available in different textures |
Generally in square in size of 300x300 or 200x200 |
|
impact resistance |
If sharp and heavy articles falls on laid ultra tiles, physically only small area chipping may occur |
poor impact resistance. The tiles may break in pieces and come out from the bonding |
|
Skid resistance |
As per ASTM E303 minimum requirement, for antiskid is 25 BPN whereas ultra more than 80 BPN coefficient of friction for skid resistance is > 0.8 |
Vitrified tiles as per standard requirement should be> 0.40 in coefficient of friction of skid resistance is far below than ultra-designer tiles |
|
Hardness (MOH's) |
> 6.0 |
>6.0 |
|
Breaking strength |
Ultra-designer tiles is >2850 N |
Generally it is > 1300 N |
|
Abrasion resistance |
generally 1.4 to 1.6 whereas, maximum allowed as per ISO standard for heavy duty tiles is 2.5 |
Generally this test of loss in thickness is done as per the ISO 1237 and it should be less than 175 mm cube (as per ISO 4457-2007) |
|
Density (gm/cc) |
>2.5 |
>2.0 |
|
Color Fastness |
No color change |
No color change |
|
Cost |
generally less than Rs 50/- per Sq ft. |
heavy duty exterior grade cost more than rs 85/- per sq ft |
|
Bondage with cement |
Cement to cement is very good |
Bonding for exterior is weak |
Specifications
|
Description |
Ultra designer tiles |
heavy duty vitrified tiles |
|
Range |
Floor, wall, step & raiser |
generally floor |
|
Color |
20 colors with special cloudy effect. Available from light colors to bright colors |
Only maximum 3 colors available. Generally dull by nature |
|
Designs |
Various shapes with interlocking, combo tiles are available in different textures |
Generally in square in size of 300x300 or 200x200 |
|
impact resistance |
If sharp and heavy articles falls on laid ultra tiles, physically only small area chipping may occur |
poor impact resistance. The tiles may break in pieces and come out from the bonding |
|
Skid resistance |
As per ASTM E303 minimum requirement, for antiskid is 25 BPN whereas ultra more than 80 BPN coefficient of friction for skid resistance is > 0.8 |
Vitrified tiles as per standard requirement should be> 0.40 in coefficient of friction of skid resistance is far below than ultra-designer tiles |
|
Hardness (MOH's) |
> 6.0 |
>6.0 |
|
Breaking strength |
Ultra-designer tiles is >2850 N |
Generally it is > 1300 N |
|
Abrasion resistance |
generally 1.4 to 1.6 whereas, maximum allowed as per ISO standard for heavy duty tiles is 2.5 |
Generally this test of loss in thickness is done as per the ISO 1237 and it should be less than 175 mm cube (as per ISO 4457-2007) |
|
Density (gm/cc) |
>2.5 |
>2.0 |
|
Color Fastness |
No color change |
No color change |
|
Cost |
generally less than Rs 50/- per Sq ft. |
heavy duty exterior grade cost more than rs 85/- per sq ft |
|
Bondage with cement |
Cement to cement is very good |
Bonding for exterior is weak |
Specifications
|
Description |
Ultra designer tiles |
heavy duty vitrified tiles |
|
Range |
Floor, wall, step & raiser |
generally floor |
|
Color |
20 colors with special cloudy effect. Available from light colors to bright colors |
Only maximum 3 colors available. Generally dull by nature |
|
Designs |
Various shapes with interlocking, combo tiles are available in different textures |
Generally in square in size of 300x300 or 200x200 |
|
impact resistance |
If sharp and heavy articles falls on laid ultra tiles, physically only small area chipping may occur |
poor impact resistance. The tiles may break in pieces and come out from the bonding |
|
Skid resistance |
As per ASTM E303 minimum requirement, for antiskid is 25 BPN whereas ultra more than 80 BPN coefficient of friction for skid resistance is > 0.8 |
Vitrified tiles as per standard requirement should be> 0.40 in coefficient of friction of skid resistance is far below than ultra-designer tiles |
|
Hardness (MOH's) |
> 6.0 |
>6.0 |
|
Breaking strength |
Ultra-designer tiles is >2850 N |
Generally it is > 1300 N |
|
Abrasion resistance |
generally 1.4 to 1.6 whereas, maximum allowed as per ISO standard for heavy duty tiles is 2.5 |
Generally this test of loss in thickness is done as per the ISO 1237 and it should be less than 175 mm cube (as per ISO 4457-2007) |
|
Density (gm/cc) |
>2.5 |
>2.0 |
|
Color Fastness |
No color change |
No color change |
|
Cost |
generally less than Rs 50/- per Sq ft. |
heavy duty exterior grade cost more than rs 85/- per sq ft |
|
Bondage with cement |
Cement to cement is very good |
Bonding for exterior is weak |
Specifications
|
Description |
Ultra designer tiles |
heavy duty vitrified tiles |
|
Range |
Floor, wall, step & raiser |
generally floor |
|
Color |
20 colors with special cloudy effect. Available from light colors to bright colors |
Only maximum 3 colors available. Generally dull by nature |
|
Designs |
Various shapes with interlocking, combo tiles are available in different textures |
Generally in square in size of 300x300 or 200x200 |
|
impact resistance |
If sharp and heavy articles falls on laid ultra tiles, physically only small area chipping may occur |
poor impact resistance. The tiles may break in pieces and come out from the bonding |
|
Skid resistance |
As per ASTM E303 minimum requirement, for antiskid is 25 BPN whereas ultra more than 80 BPN coefficient of friction for skid resistance is > 0.8 |
Vitrified tiles as per standard requirement should be> 0.40 in coefficient of friction of skid resistance is far below than ultra-designer tiles |
|
Hardness (MOH's) |
> 6.0 |
>6.0 |
|
Breaking strength |
Ultra-designer tiles is >2850 N |
Generally it is > 1300 N |
|
Abrasion resistance |
generally 1.4 to 1.6 whereas, maximum allowed as per ISO standard for heavy duty tiles is 2.5 |
Generally this test of loss in thickness is done as per the ISO 1237 and it should be less than 175 mm cube (as per ISO 4457-2007) |
|
Density (gm/cc) |
>2.5 |
>2.0 |
|
Color Fastness |
No color change |
No color change |
|
Cost |
generally less than Rs 50/- per Sq ft. |
heavy duty exterior grade cost more than rs 85/- per sq ft |
|
Bondage with cement |
Cement to cement is very good |
Bonding for exterior is weak |
Specifications
|
Description |
Ultra designer tiles |
heavy duty vitrified tiles |
|
Range |
Floor, wall, step & raiser |
generally floor |
|
Color |
20 colors with special cloudy effect. Available from light colors to bright colors |
Only maximum 3 colors available. Generally dull by nature |
|
Designs |
Various shapes with interlocking, combo tiles are available in different textures |
Generally in square in size of 300x300 or 200x200 |
|
impact resistance |
If sharp and heavy articles falls on laid ultra tiles, physically only small area chipping may occur |
poor impact resistance. The tiles may break in pieces and come out from the bonding |
|
Skid resistance |
As per ASTM E303 minimum requirement, for antiskid is 25 BPN whereas ultra more than 80 BPN coefficient of friction for skid resistance is > 0.8 |
Vitrified tiles as per standard requirement should be> 0.40 in coefficient of friction of skid resistance is far below than ultra-designer tiles |
|
Hardness (MOH's) |
> 6.0 |
>6.0 |
|
Breaking strength |
Ultra-designer tiles is >2850 N |
Generally it is > 1300 N |
|
Abrasion resistance |
generally 1.4 to 1.6 whereas, maximum allowed as per ISO standard for heavy duty tiles is 2.5 |
Generally this test of loss in thickness is done as per the ISO 1237 and it should be less than 175 mm cube (as per ISO 4457-2007) |
|
Density (gm/cc) |
>2.5 |
>2.0 |
|
Color Fastness |
No color change |
No color change |
|
Cost |
generally less than Rs 50/- per Sq ft. |
heavy duty exterior grade cost more than rs 85/- per sq ft |
|
Bondage with cement |
Cement to cement is very good |
Bonding for exterior is weak |
Specifications
|
Description |
Ultra designer tiles |
heavy duty vitrified tiles |
|
Range |
Floor, wall, step & raiser |
generally floor |
|
Color |
20 colors with special cloudy effect. Available from light colors to bright colors |
Only maximum 3 colors available. Generally dull by nature |
|
Designs |
Various shapes with interlocking, combo tiles are available in different textures |
Generally in square in size of 300x300 or 200x200 |
|
impact resistance |
If sharp and heavy articles falls on laid ultra tiles, physically only small area chipping may occur |
poor impact resistance. The tiles may break in pieces and come out from the bonding |
|
Skid resistance |
As per ASTM E303 minimum requirement, for antiskid is 25 BPN whereas ultra more than 80 BPN coefficient of friction for skid resistance is > 0.8 |
Vitrified tiles as per standard requirement should be> 0.40 in coefficient of friction of skid resistance is far below than ultra-designer tiles |
|
Hardness (MOH's) |
> 6.0 |
>6.0 |
|
Breaking strength |
Ultra-designer tiles is >2850 N |
Generally it is > 1300 N |
|
Abrasion resistance |
generally 1.4 to 1.6 whereas, maximum allowed as per ISO standard for heavy duty tiles is 2.5 |
Generally this test of loss in thickness is done as per the ISO 1237 and it should be less than 175 mm cube (as per ISO 4457-2007) |
|
Density (gm/cc) |
>2.5 |
>2.0 |
|
Color Fastness |
No color change |
No color change |
|
Cost |
generally less than Rs 50/- per Sq ft. |
heavy duty exterior grade cost more than rs 85/- per sq ft |
|
Bondage with cement |
Cement to cement is very good |
Bonding for exterior is weak |
Specifications
|
Description |
Ultra designer tiles |
heavy duty vitrified tiles |
|
Range |
Floor, wall, step & raiser |
generally floor |
|
Color |
20 colors with special cloudy effect. Available from light colors to bright colors |
Only maximum 3 colors available. Generally dull by nature |
|
Designs |
Various shapes with interlocking, combo tiles are available in different textures |
Generally in square in size of 300x300 or 200x200 |
|
impact resistance |
If sharp and heavy articles falls on laid ultra tiles, physically only small area chipping may occur |
poor impact resistance. The tiles may break in pieces and come out from the bonding |
|
Skid resistance |
As per ASTM E303 minimum requirement, for antiskid is 25 BPN whereas ultra more than 80 BPN coefficient of friction for skid resistance is > 0.8 |
Vitrified tiles as per standard requirement should be> 0.40 in coefficient of friction of skid resistance is far below than ultra-designer tiles |
|
Hardness (MOH's) |
> 6.0 |
>6.0 |
|
Breaking strength |
Ultra-designer tiles is >2850 N |
Generally it is > 1300 N |
|
Abrasion resistance |
generally 1.4 to 1.6 whereas, maximum allowed as per ISO standard for heavy duty tiles is 2.5 |
Generally this test of loss in thickness is done as per the ISO 1237 and it should be less than 175 mm cube (as per ISO 4457-2007) |
|
Density (gm/cc) |
>2.5 |
>2.0 |
|
Color Fastness |
No color change |
No color change |
|
Cost |
generally less than Rs 50/- per Sq ft. |
heavy duty exterior grade cost more than rs 85/- per sq ft |
|
Bondage with cement |
Cement to cement is very good |
Bonding for exterior is weak |
Specifications
|
Description |
Ultra designer tiles |
heavy duty vitrified tiles |
|
Range |
Floor, wall, step & raiser |
generally floor |
|
Color |
20 colors with special cloudy effect. Available from light colors to bright colors |
Only maximum 3 colors available. Generally dull by nature |
|
Designs |
Various shapes with interlocking, combo tiles are available in different textures |
Generally in square in size of 300x300 or 200x200 |
|
impact resistance |
If sharp and heavy articles falls on laid ultra tiles, physically only small area chipping may occur |
poor impact resistance. The tiles may break in pieces and come out from the bonding |
|
Skid resistance |
As per ASTM E303 minimum requirement, for antiskid is 25 BPN whereas ultra more than 80 BPN coefficient of friction for skid resistance is > 0.8 |
Vitrified tiles as per standard requirement should be> 0.40 in coefficient of friction of skid resistance is far below than ultra-designer tiles |
|
Hardness (MOH's) |
> 6.0 |
>6.0 |
|
Breaking strength |
Ultra-designer tiles is >2850 N |
Generally it is > 1300 N |
|
Abrasion resistance |
generally 1.4 to 1.6 whereas, maximum allowed as per ISO standard for heavy duty tiles is 2.5 |
Generally this test of loss in thickness is done as per the ISO 1237 and it should be less than 175 mm cube (as per ISO 4457-2007) |
|
Density (gm/cc) |
>2.5 |
>2.0 |
|
Color Fastness |
No color change |
No color change |
|
Cost |
generally less than Rs 50/- per Sq ft. |
heavy duty exterior grade cost more than rs 85/- per sq ft |
|
Bondage with cement |
Cement to cement is very good |
Bonding for exterior is weak |
Mr. Vineeth Gilda (Moderan Flooring Tiles Industry)
Bodhan Road, Arsapally Main Road, Nizamabad-503186, Telangana, India
Share us via
