• Operating Pressure< 150 PSI
• Temperature< 49 deg C

These cages are produced using the latest automatic welding machines. These products are characteristic of their finish, ensuring smooth surfaces devoid of any burrs and sharp edges. Moreover the automatic machines provide For accurate dimensions and strength. The filter bag cages are the support system of the critical filter bags in a dust collector. Its quality in terms of dimensions, finish etc define the life of the Filter bags and ultimately the emissions from the system. Poor quality filter bags can cause many failures like

• Temperature150 deg C
• Weight400, 500, 550, 600 gsm

The pleated filter bags and cartridges are an innovation over the conventional filter bags to address market requirements of higher efficiency and lower bag filter space requirement. These products are made up of spun bonded polyester, which works on the “surface filtration technology”. As the media is assembled in a pleated fashion, it provides 3 to 4 times higher filtration area compared to conventional bags.

• Mesh Size1.5mm to 4mm

The Granular Activated Carbon (GAC) of particle size 0.5 to 4mm are popularly used in processes running continuously – for instance GAC packed in columns inside a FRP tank. In R.O.technology, GAC is used to remove chlorine from the water that is intolerable to the R.O.Membrane. Moreover carbon polishing improves the taste of the water.

Filter bag cages also focuses on reducing the lead time for this product, owing to the high capacity of the machines. MMP cages are available in a variety of designs – top cap, length of cages, number of vertical wires and rings, moc of wires etc to suit custom requirements. The cages can be provided in a Range of outer diameter starting from 117 mm to 152mm. The Cage lengths can be made as per customer requirements. The possibility of cage joints in 3 configurations provide for greater Flexibility and reduction of transportation costs.

• Operating Pressure< 150 PSI
• Temperature< 49 deg C

These cages are produced using the latest automatic welding machines. These products are characteristic of their finish, ensuring smooth surfaces devoid of any burrs and sharp edges. Moreover the automatic machines provide For accurate dimensions and strength. The filter bag cages are the support system of the critical filter bags in a dust collector. Its quality in terms of dimensions, finish etc define the life of the Filter bags and ultimately the emissions from the system. Poor quality filter bags can cause many failures like

• Temperature150 deg C
• Weight400, 500, 550, 600 gsm

The pleated filter bags and cartridges are an innovation over the conventional filter bags to address market requirements of higher efficiency and lower bag filter space requirement. These products are made up of spun bonded polyester, which works on the “surface filtration technology”. As the media is assembled in a pleated fashion, it provides 3 to 4 times higher filtration area compared to conventional bags.

• Mesh Size1.5mm to 4mm

The Granular Activated Carbon (GAC) of particle size 0.5 to 4mm are popularly used in processes running continuously – for instance GAC packed in columns inside a FRP tank. In R.O.technology, GAC is used to remove chlorine from the water that is intolerable to the R.O.Membrane. Moreover carbon polishing improves the taste of the water.

Filter bag cages also focuses on reducing the lead time for this product, owing to the high capacity of the machines. MMP cages are available in a variety of designs – top cap, length of cages, number of vertical wires and rings, moc of wires etc to suit custom requirements. The cages can be provided in a Range of outer diameter starting from 117 mm to 152mm. The Cage lengths can be made as per customer requirements. The possibility of cage joints in 3 configurations provide for greater Flexibility and reduction of transportation costs.