With an experience of many years, we are manufacturing and supplying wide range of Linear IC Trainer. Offered product is used to measure input & output resistance, slew rate, frequency response, input offset voltage & current and input bias current. This is also tested on various predefined parameters to conform its flawless functionality. Additionally, clients can easily avail this Linear IC Trainer to customers at reasonable prices.

Features:

1. Corrosion resistance
2. Smooth finish
3. Easy to use
4. Highly accurate

Digital Electronic Trainer Kit, is most widely demanded Teaching Equipment. Precision engineered with the latest technology, Digital Electronic Trainer Kit provided by us is well-known for giving high performance. Students can easily understand the concept with this Digital Electronic Trainer Kit.

Features:

1. Corrosion resistance
2. Smooth finish
3. Easy to use
4. Highly accurate

Specifications:

• 7 segment LED display (2 nos.)
• Logic input switches (10 nos.)
• Bounce less Pulsar 1 Hz to 100 KHz TTL clocks.
• Bread Board - 2 Nos.
• Power LED Indication.
• Built in Regulated Power Supply: 5V/1A , 12V/1A DC
• AC Input : 230V AC, 50 Hz, 10%.
• Mounted on a Sophisticated Cabinet.

Process Control Trainer offered by us is known for high performance and is very easy to understand. The set up of our Process Control Trainer consists of a centrifugal pump coupled with electrical motor, supply tank, measuring tank & pipe fittings for closed loop water circulation.

Features:

1. Water Circulation Closed loop.
2. Compact & stand-alone set up
3. Powder Coated Painted structure
4. Simple to operate & maintain

Specifications:

• Pump : HP Centrifugal Pump.
• AC Motor : HP 230V AC.
• Measuring tank : 40 Ltrs. Made of MS with FRP Lining and fitted with piezo meter tube & scale.
• Piping & Fittings : GI/PVC with necessary Valves.
• Control Unit : PID Controller.
• Fitted with DP Transmitter, Capacitive type Level Transmitter, Temperature Transmitter with PT100Sensor, Pressure Transmitter, Pneumatic Operated Control Valves, I/P Converter, P/I Converter, Thyrister Drive for Heater Control, Pressure Gauges.
• Control panel : 1HP DOL Starter. Digital Timer. MCB Load and Line Indicator.

Required Utilities :

• Electric supply Provide : 230 +/-10 VAC, 50 Hz, Single phase
• Electric supply with proper earthing. (Neutral . Earth voltage less than 5 VAC.)
• E5A, Three pin socket with switch for pump. Water supply Tap water connection . BSP

We are a well-known Electrical Machine Trainer Manufacturer and Supplier. We offer quality assured Electrical Machine Trainer that is made with top quality components. Our Electrical Machine Trainer is manufactured with premium grade components with the latest technology. We have become a preferred name in market for availing Electrical Machine Trainer.

Features:

1. Completely self-contained stand alone unit.
2. Test points provided on panel at various stages in the circuit.
3. Set of required number of Patch cords.
4. Strongly supported by a comprehensive instruction manual complete with theory and operating details.

Specifications:The Panel Consists of

• Wattmeter : Range-Voltage-AC : 0-440V Current-AC - 5A.
• Voltmeter : Range- AC : 0-440V
• Current Meter Range : AC - 25A / CT for higher Current Measurement.
• AC Varic Voltage Input : 440V AC , Output : 0-470V .Current : 2A
• Built in DC Rectifier.
• Built in RPM Indicator.
• DOL Starter and 4 Point DC Starter.
• Power supply requirement : 440V , AC, 50Hz

With an experience of many years, we are manufacturing and supplying wide range of Linear IC Trainer. Offered product is used to measure input & output resistance, slew rate, frequency response, input offset voltage & current and input bias current. This is also tested on various predefined parameters to conform its flawless functionality. Additionally, clients can easily avail this Linear IC Trainer to customers at reasonable prices.

Features:

1. Corrosion resistance
2. Smooth finish
3. Easy to use
4. Highly accurate

Digital Electronic Trainer Kit, is most widely demanded Teaching Equipment. Precision engineered with the latest technology, Digital Electronic Trainer Kit provided by us is well-known for giving high performance. Students can easily understand the concept with this Digital Electronic Trainer Kit.

Features:

1. Corrosion resistance
2. Smooth finish
3. Easy to use
4. Highly accurate

Specifications:

• 7 segment LED display (2 nos.)
• Logic input switches (10 nos.)
• Bounce less Pulsar 1 Hz to 100 KHz TTL clocks.
• Bread Board - 2 Nos.
• Power LED Indication.
• Built in Regulated Power Supply: 5V/1A , 12V/1A DC
• AC Input : 230V AC, 50 Hz, 10%.
• Mounted on a Sophisticated Cabinet.

Process Control Trainer offered by us is known for high performance and is very easy to understand. The set up of our Process Control Trainer consists of a centrifugal pump coupled with electrical motor, supply tank, measuring tank & pipe fittings for closed loop water circulation.

Features:

1. Water Circulation Closed loop.
2. Compact & stand-alone set up
3. Powder Coated Painted structure
4. Simple to operate & maintain

Specifications:

• Pump : HP Centrifugal Pump.
• AC Motor : HP 230V AC.
• Measuring tank : 40 Ltrs. Made of MS with FRP Lining and fitted with piezo meter tube & scale.
• Piping & Fittings : GI/PVC with necessary Valves.
• Control Unit : PID Controller.
• Fitted with DP Transmitter, Capacitive type Level Transmitter, Temperature Transmitter with PT100Sensor, Pressure Transmitter, Pneumatic Operated Control Valves, I/P Converter, P/I Converter, Thyrister Drive for Heater Control, Pressure Gauges.
• Control panel : 1HP DOL Starter. Digital Timer. MCB Load and Line Indicator.

Required Utilities :

• Electric supply Provide : 230 +/-10 VAC, 50 Hz, Single phase
• Electric supply with proper earthing. (Neutral . Earth voltage less than 5 VAC.)
• E5A, Three pin socket with switch for pump. Water supply Tap water connection . BSP

We are a well-known Electrical Machine Trainer Manufacturer and Supplier. We offer quality assured Electrical Machine Trainer that is made with top quality components. Our Electrical Machine Trainer is manufactured with premium grade components with the latest technology. We have become a preferred name in market for availing Electrical Machine Trainer.

Features:

1. Completely self-contained stand alone unit.
2. Test points provided on panel at various stages in the circuit.
3. Set of required number of Patch cords.
4. Strongly supported by a comprehensive instruction manual complete with theory and operating details.

Specifications:The Panel Consists of

• Wattmeter : Range-Voltage-AC : 0-440V Current-AC - 5A.
• Voltmeter : Range- AC : 0-440V
• Current Meter Range : AC - 25A / CT for higher Current Measurement.
• AC Varic Voltage Input : 440V AC , Output : 0-470V .Current : 2A
• Built in DC Rectifier.
• Built in RPM Indicator.
• DOL Starter and 4 Point DC Starter.
• Power supply requirement : 440V , AC, 50Hz