Our Products
Separators & Strainers
2 Products availablePVC Sheets
2 Products availableSpray Nozzles
1 Products availableMachines And Equipments
1 Products availableFilter Media
1 Products availableDosing Pumps
1 Products availableRoad Safety Products
1 Products availableLaboratory Equipments
1 Products availableWe offer a complete product range of Cooling Tower Film Fill, Splash Fill, Drift Eliminator and Pvc Drift Eliminator
MM Aqua is into manufacture and marketing of various types of fill design suitable for different water quality. These fill Media are manufactured meeting CTI standards.
Fill Media manufacturted is of international quality and are prefered by leading consultants like NTPC, Fitchner, M N Dastur, Desein, TCE, EIL and NPC etc and is used by all leading Cooling Towers manufacturers.
Fill media manufacture by MM Aqua is exported to countries like Malaysia, Singapore, Thailand, Middle East, Canada, Australia, South Africa, Brazil, UK etc.
MM Aqua has big production capacity to meet large order Qty in required project schedule.
MM Aqua offers following type of fill media.
Film Fill: C10.12 / C10.19 / C10.27
In Conventional vacuum forming the sheets being formed needs anchoring both ends of the sheet, which results in stretching of material. Weak spots of lower tickness at crest and trough and at times also on flute surface are formed. Vacuum-formed sheets suffer from unpredictable thikness due to material stretching during the process. reduction in thickness is to the tune of 40%. However, by leaving one end free during continuous roll forming, MM Aqua avoids the undesirable results.
In conventional vacuum forming, the raw sheet is drawn. If corrugations are at 60, then the sheet must be stretched to cover about 1.4 times its original area. This results in a minimum thinning of 30% thereby compromising on the crush, impact and erosion resistance properties of the finished product. We have a continuous vacuum forming machine.
Type | C 10.12 | C 10.19 | C 10.27 |
---|---|---|---|
Flute size | 12 mm | 19 mm | 27 mm |
Surface of Exchange | 243 m2/m3 | 148 m2/m3 | 112 m2/m3 |
Min. Water Load | 8 m3/m2 h | 5 m3/m2 h | 3 m3/m2 h |
Standard Dimentions | L = 1200 W = 300 H = 300 |
L = 1200 W = 300 H = 300 |
L = 1200 W = 300 H = 300 |
Distance of Support | Max. 1000 mm | Max. 1000 mm | Max. 1000 mm |
Width of Supports | 50 mm | 50 mm | 50 mm |
Material Thickness | 0.20 mm | 0.25 mm | 0.40 mm |
Materials | PVC | PVC | PVC |
Drainage System | HVT /AT | AT | – |
Weight | 35kg/m3 | 28kg/m3 | 28kg/m3 |
Fields of Application | Cross-flow and counter-flow processes |
V bartype Splash bars are manufactured out of a very modern extrusion line to ensure properly formed strengthening rib and perfect fittingV-barsupport to bench tie.
V barSplash fill is manufactured in option of rhombus and round punches.
TurbosplashTurbosplash fill is very suitable fill for brackish water quality and ambinent prone to algae growth and thus leading to clogging of fill. Turbosplash fill has baffel approx 50mm wide apart and thus do not clog. Spalsh actions makes the fill self cleaning adn thus provide longer life.
MM Aqua Drift Eliminator has successfully operated in cooling tower of all types.There are 3 different design of Drift Eliminator are availableto meet any customers requirement.