We hold expertise in manufacturing and supplying and exporting a superior quality range of water baths. M.K. Scientific Instruments water baths are heated chambers used for many industrial areas applications environmental applications, academic facilities, clinical laboratories, food technology, government research laboratories and waste water facilities etc. by M.K. Scientific Instruments are known as exceptional Water baths specially designed for testing applications.

• Double walled
• Inner Body: Inner chamber made of Stainless steel.
• Outer Body: outer chamber develop using high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches.
• Insulation between inner & outer wall with mineral wool/ glass wool thick to avoid any heat loss.
• Comes with glass mercury thermometer based temperature display provision
• Temperature Range: Temperature ranges from few degrees above ambient temperature to 97C 2C.
• Temperature Controller: The Temperature is totally microprocessor based P.I.D., /Thermostat or Digital Temperature Controller cum Indicator controlled for accurate temperature rating.
• It is Suitable for holding 2, 4, 6, 8 racks
• Power: Power input to be 220-230 Volts AC, 50/60 Hz fitted with Indian plug.
• Safety Feature: Thermostat based safety device.
• Perforated cover of stainless steel based diffuser shelf finish
• Shelves: Stainless steel perforated/wire road shelves adjustable and sliding.
• Heater : Tubular U type air heater

Temperature is totally microprocessor based PID digital temperature indicator-cum-controller. Temperature Range: Temperature ranges from few degrees above ambient temperature to 95C with temperature accuracy of 0.5C. The exterior chamber is made of high grade mild steel with powder coated finish and The internal chamber is made of high grade corrosion resistant stainless steel.

• Double walled
• Inner Body: Inner chamber made of Stainless steel.
• Outer Body: outer chamber develop using high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches.
• Insulation between inner & outer wall with mineral wool/ glass wool thick to avoid any heat loss.
• System coming fitted with drain plug for allowing easy cleaning support
• Temperature Range: Temperature ranges from few degrees above ambient temperature to 97C 2C.
• Temperature Controller: The Temperature is totally Microprocessor Based PID Digital Temperature Indicator-Cum-Controller based temperature for accurate temperature rating.
• It is Suitable for holding 2, 4, 6, 8 racks
• Power: Power input to be 220-230 Volts AC, 50/60 Hz fitted with Indian plug.
• Perforated cover of stainless steel based diffuser shelf finish
• Heater : Tubular U type air heater

We are manufacturer & supplier of Incubator/ Laboratory incubator. Incubator is one of most important lab equipment in many research centers, hospitals and other pharmaceutical labs, Clinical, Environmental, Biotechnology, Medical, Petroleum, Industrial Applications by M.K. Scientific Instruments are known as exceptional Incubator Shaker specially designed for testing applications. M.K. Scientific Instruments as an experienced manufacture in INDIA,

• Double walled
• Inner Body: Inner chamber made of Stainless steel.
• Outer Body: outer chamber develop using high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches.
• Insulation between inner & outer wall with glass wool/ mineral wool thick to avoid any heat loss.
• Temperature Range: Few degrees above ambient 70C with temperature accuracy of 1C.
• Temperature Controller: The Temperature is totally microprocessor based P.I.D. or Digital Temperature Controller cum Indicator controlled for accurate temperature rating.
• Ventilator: Placed on the middle of both side.
• Air Circulation: Forced convection system through use of blowers & motors that provides for superior mixing as well as strong dispersion.
• Power: Power input to be 220-230 Volts AC, 50/60 Hz fitted with Indian plug.
• Safety Feature: Thermostat based safety device
• Shelves: Stainless steel perforated/wire road shelves adjustable and sliding.
• Door: Door with synthetic rubber gasket & Door has a glass viewer window.
• Heater : Tubular U type air heater

Cooling Incubators by M.K. Scientific Instruments are come with durable and rugged design for delivering excellent quality performance. These units are made with double walled construction and are fully insulated with polyurethane foam to reduce running costs. The exterior chamber is made of high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches. The internal chamber is made of high grade corrosion resistant stainless steel. Each Cooling Incubator is delivered with number of shelves to keep the object in the units. The number of these shelves may vary model to model or size of the unit. Generally 2 to 6 shelves are provided with these units as per size and capacity. These shelves are made of aluminum sheets of stainless steel with polished layer.

• Double walled
• Inner Body: Inner chamber made of Stainless steel.
• Outer Body: outer chamber develop using high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches.
• Insulation between inner & outer wall with polyurethane foam (PUF) to reduce running costs.
• Temperature Range: 5C to 60C with temperature accuracy of 0.5C.
• Temperature Controller: The Temperature is totally microprocessor based P.I.D. or Digital Temperature Controller cum Indicator controlled for accurate temperature rating.
• Air Circulation: Forced convection system through use of blowers & motors that provides for superior mixing as well as strong dispersion.
• Power: Power input to be 220-230 Volts AC, 50/60 Hz fitted with Indian plug.
• Safety Feature: Thermostat based safety device
• Shelves: Stainless steel perforated/wire road shelves adjustable and sliding.
• Door: Door with synthetic rubber gasket & Door has a glass viewer window.
• Heater: Tubular U type air heater.
• Compressor: Hermetically Sealed Air Cooling Compressor (CFC Free).

B.O.D. incubators often called low temperature incubators are one of most important lab equipment in many research centers, hospitals and other pharmaceutical labs. BOD incubators by M.K. Scientific Instruments are known as exceptional lab incubators specially designed for a variety of incubation and testing applications. The series of BOD incubator is perfect for BOD testing and other related jobs of research. Designed to meet customized requirements of different customers, M.K. Scientific Instruments as an experienced BOD Incubator manufacture in INDIA, The Biochemical Oxygen Demand incubator comes in various sizes and capacities.

CONSTRUCTION:BOD incubators by M.K. Scientific Instruments are come with durable and rugged design for delivering excellent quality performance. These units are made with double walled construction and are fully insulated with polyurethane foam to reduce running costs. The exterior chamber is made of high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches. The internal chamber is made of high grade corrosion resistant stainless steel. Cabinet is mounted on castors for easy movement from one place to another.

Shelves:Each Biochemical Oxygen Demand incubator is delivered with number of shelves to keep the object in the units. The number of these shelves may vary model to model or size of the unit. Generally 2 to 4 shelves are provided with these units as per size and capacity. These shelves are made of aluminum sheets of stainless steel with polished layer.

COOLING:Cooling quality is one of important factors that need to be checked before choosing any BOD incubator for effective cooling, M. K. Scientific Instruments CFC free refrigerant.

Doors:The doors of these BOD incubators are available in Glass or solid doors. If you are looking for customized incubator you may ask your choice of doors. Furthermore glass door is more comfortable to use for easy viewing of object inside to be researched.

TEMPERATURE RANGE:These BOD incubators by M.K. Scientific Instruments are come in temperature ranges from 5C to 60C with temperature accuracy of +/- 0.5C and temperature uniformity of +/- 1C. The Controller is totally electronic controlled with Digital display for accurate temperature rating.

SAFETY:To provide proper safety at work place and to enjoy safe use, these units are equipped with various safeties protection devices such as over current protections, leakage breaker and temper controls.

OTHER FEATURES:These units are come with easy to view LED/LCD display, door lock interior lamp, and Tubular air heater with fins heating system and run with 220-230 Volts power supply.

Plant Growth Chamber by M.K. Scientific Instruments is come with durable and rugged design for delivering excellent quality performance. Plant Growth Chamber is made with double walled construction and are fully insulated with polyurethane foam to reduce running costs. The exterior chamber is made of high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches. The internal chamber is made of high grade corrosion resistant stainless steel. Each Plant Growth Chamber is delivered with number of shelves to keep the object in the units. The number of these shelves may vary model to model or size of the unit. Generally 2 to 4 shelves are provided with these units as per size and capacity. These shelves are made of aluminum sheets of stainless steel with polished layer.

• Double walled
• Inner Body: Inner chamber made of Stainless steel.
• Outer Body: outer chamber develop using high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches.
• Insulation between inner & outer wall with polyurethane foam (PUF) to reduce running costs.
• Temperature Range: 5C to 60C with temperature accuracy of 1C as well as humidity control from 55% to 95%
• Illumination: Exterior Illumination with 5 Levels Light Control (0%, 25%, 50%, 75% And 100%).
• Temperature Controller: The Temperature is totally microprocessor based P.I.D. or Digital Temperature Controller cum Indicator controlled for accurate temperature rating.
• Illumination: Exterior Illumination with Fluorescent Tubes.
• Programmable :Timer
• Air Circulation: Forced convection system through use of blowers & motors that provides for superior mixing as well as strong dispersion.
• Safety Feature: Thermostat based safety device
• Shelves: Stainless steel perforated/wire road shelves adjustable and sliding.
• Door: Door with synthetic rubber gasket & Door has a glass viewer window.
• Heater: Tubular U type air heater.
• Compressor: Hermetically Sealed Air Cooling Compressor (CFC Free).
• Humidity: By Steam Process
• Humidity Range: 5% above Ambient From 55% to 95% RH+5%RH at Cool Temperatures.
• Power: Power input to be 220-230 Volts AC, 50/60 Hz fitted with Indian plug.

Orbital Incubators Shaker are design for continues shaking for solution in Erynmeyer flask from 100 ml to 1000 ml at a constant set temperature range ambient + to 70 deg.C the outer body made mild steel, Inner chamber and shaking tray are made of SS 304G with fine finish. Plate- form is fitted with lotus clamps of nylon clamps. The motion of plate - form is by means of heavy duty DC motor with continues variable speed regulator , range 50 to 250 rpm.
. Size 9 Flasks 250-500 ml
. Size 16 Flasks 250-500 ml
. Size 25 Flasks 250-500 ml

We are manufacturer & supplier of Humidity (Stability) Chamber Humidity (Stability) Chamber is one of most important lab equipment in many research centers, hospitals and other pharmaceutical labs, Clinical, Environmental, Biotechnology, Medical, Petroleum, Industrial Applications by M.K. Scientific Instruments are known as exceptional Humidity (Stability) Chamber specially designed for testing applications. M.K. Scientific Instruments as an experienced manufacture in INDIA.

• Double walled
• Inner Body: Inner chamber made of Stainless steel.
• Outer Body: outer chamber develop using high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches.
• Insulation between inner & outer wall with polyurethane foam (PUF) to reduce running costs.
• Temperature Range: 5C above ambient to 60C with temperature accuracy of 0.5C.
• Temperature Controller: The Temperature is totally microprocessor based P.I.D. or Digital Temperature Controller cum Indicator controlled for accurate temperature rating.
• Air Circulation: Forced convection system through use of blowers & motors that provides for superior mixing as well as strong dispersion.
• Power: Power input to be 220-230 Volts AC, 50/60 Hz fitted with Indian plug.
• Safety Feature: Thermostat based safety device
• Shelves: Stainless steel perforated/wire road shelves adjustable and sliding.
• Door: Door with synthetic rubber gasket & Door has a glass viewer window.
• Heater: Tubular U type air heater.
• Compressor: Hermetically Sealed Air Cooling Compressor (CFC Free).

We hold expertise in manufacturing and supplying and exporting a superior quality range of Environmental Chamber. M.K. Scientific Instruments Environmental Chamber specially designed for drying environment of plant and animal growth, determination of di-electric strength, proofness of packed materials, insulation testes of electrical components and many other tests requiring an atmosphere of controlled temperature & humidity. M.K. Scientific Instruments as an experienced manufacture in INDIA.

• Double walled
• Inner Body: Inner chamber made of Stainless steel.
• Outer Body: outer chamber develop using high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches.
• Insulation between inner & outer wall with polyurethane foam (PUF) to reduce running costs.
• Temperature Range: The temperature can be controlled from 10C to 60C 2C and humidity 55% to 95% 5%.
• Temperature Controller: The Temperature is totally microprocessor based P.I.D. or Digital Temperature Controller cum Indicator controlled for accurate temperature rating.
• Compressor: Hermetically Sealed Air Cooling Compressor (CFC Free).
• Air Circulation: Forced convection system through use of blowers & motors that provides for superior mixing as well as strong dispersion.
• Shelves: Stainless steel perforated/wire road shelves adjustable and sliding.
• Door: Door with synthetic rubber gasket & Door has a glass viewer window.
• Heater: Tubular U type air heater.
• Power: Power input to be 220-230 Volts AC, 50/60 Hz fitted with Indian plug.

M.K. Scientific Instruments are come with durable and rugged design for delivering excellent quality performance. These units are made with double walled construction and are fully insulated with mineral wool to reduce running costs. The exterior chamber is made of high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches. The internal chamber is made of high grade corrosion resistant stainless steel.

• Double walled
• Inner Body: Inner chamber made of Stainless steel.
• Outer Body: outer chamber develop using high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches.
• Insulation between inner & outer wall with mineral wool/ glass wool thick to avoid any heat loss.
• System coming fitted with drain plug for allowing easy cleaning support
• Temperature Range: Temperature ranges from few degrees above ambient temperature to 97C 2C.
• Temperature Controller: The Temperature is totally microprocessor based P.I.D., /Thermostat or Digital Temperature Controller cum Indicator controlled for accurate temperature rating.
• It is Suitable for holding 2, 4, 6, 8 racks
• Power: Power input to be 220-230 Volts AC, 50/60 Hz fitted with Indian plug.
• Safety Feature: Thermostat based safety device.
• Perforated cover of stainless steel based diffuser shelf finish
• Heater : Tubular U type air heater

We are manufacturer & supplier of various types of incubators. Incubators are one of most important lab equipment in many research centers, hospitals and other pharmaceutical labs, Clinical, Environmental, Biotechnology, Medical, Petroleum, and Industrial Applications incubators by M.K. Scientific Instruments are known as exceptional lab incubators specially designed for a variety of incubation and testing applications. The series of incubators is perfect for testing and other related jobs of research. By M.K. Scientific Instruments as an experienced Incubator, BOD Incubator, Bacteriological Incubators, Cooling Incubator, Dry Bath Incubator, Incubator Shaker, Laboratory Incubators, Orbital Shaking Incubator manufacture in INDIA. These incubators come in various sizes and capacities such from 28 liters to 450 liters.

• Double walled
• Inner Body: Inner chamber made of Stainless steel.
• Outer Body: outer chamber develop using high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches.
• Insulation between inner & outer wall with glass wool/ mineral wool thick to avoid any heat loss.
• Temperature Range: Few degrees above ambient 70C with temperature accuracy of 1C.
• Temperature Controller: The Temperature is totally microprocessor based P.I.D. or Digital Temperature Controller cum Indicator controlled for accurate temperature rating.
• Ventilator: Placed on the middle of both side.
• Air Circulation: Forced convection system through use of blowers & motors that provides for superior mixing as well as strong dispersion.
• Power: Power input to be 220-230 Volts AC, 50/60 Hz fitted with Indian plug.
• Safety Feature: Thermostat based safety device
• Shelves: Stainless steel perforated/wire road shelves adjustable and sliding.
• Door: Door with synthetic rubber gasket & Door has a glass viewer window.
• Heater : Tubular U type air heater

We are manufacturer & supplier of Ovens. Ovens are one of most important lab equipment in many research centers, hospitals and other pharmaceutical labs, Environmental, Biotechnology, Medical, Petroleum, Industrial Applications by M.K. Scientific Instruments are known as exceptional Hot Air Oven specially designed for testing applications. M.K. Scientific Instruments as an experienced Hot Air Oven/ High Temperature Oven/Industrial Oven/Laboratory Oven/Vacuum Oven / Dying Oven /Bacteriological Oven manufacture in INDIA.

• Double walled.
• Inner Body: Inner chamber made of Stainless steel.
• Outer Body: outer chamber develop using high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches.
• Insulation between inner & outer wall with glass wool/ mineral wool (70 to 100 mm) thick to avoid any heat loss.
• Temperature Range: Temperature ranges from 50C to 250C with temperature accuracy of 2C.
• Temperature Controller: The Temperature is totally microprocessor based P.I.D. or Digital Temperature Controller cum Indicator controlled for accurate temperature rating.
• Air Circulation: Forced convection system through use of blowers & motors that provides for superior mixing as well as strong dispersion.

M.K. Scientific Instruments are come with durable and rugged design for delivering excellent quality performance. These units are made with double walled construction and are fully insulated with mineral wool to reduce running costs. The exterior chamber is made of high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches. The internal chamber is made of high grade corrosion resistant stainless steel.

• Double walled
• Inner Body: Inner chamber made of Stainless steel.
• Outer Body: outer chamber develop using high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches.
• Insulation between inner & outer wall with glass wool/ mineral wool thick to avoid any heat loss.
• Temperature Range: Few degrees above ambient 70C with temperature accuracy of 1C.
• Temperature Controller: The Temperature is totally microprocessor based P.I.D. or Digital Temperature Controller cum Indicator controlled for accurate temperature rating.
• Ventilator: Placed on the middle of both side.
• Air Circulation: Forced convection system through use of blowers & motors that provides for superior mixing as well as strong dispersion.
• Power: Power input to be 220-230 Volts AC, 50/60 Hz fitted with Indian plug.
• Safety Feature: Thermostat based safety device
• Shelves: Stainless steel perforated/wire road shelves adjustable and sliding.
• Door: Door with synthetic rubber gasket & Door has a glass viewer window.
• Heater : Tubular U type air heater

We are ranked amongst the foremost firms that are engaged in offering cooling/refrigerated/chiller water bath. Cooling/refrigerated/chiller water bath used for many industrial areas applications thermal control applications, analytical, diagnostic and research purposes etc. M.K. Scientific Instruments as an experienced Water Baths manufacture in INDIA.

• Double walled
• Inner Body: Inner chamber made of Stainless steel.
• Outer Body: outer chamber develop using high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches.
• Insulation between inner & outer wall with polyurethane foam (PUF) to reduce running costs.
• Temperature Controller: The Temperature is totally microprocessor based P.I.D. or Digital Temperature Controller cum Indicator controlled for accurate temperature rating.
• Safety Feature: Thermostat based safety device
• Compressor: Hermetically Sealed Air Cooling Compressor (CFC Free).
• Power: Power input to be 220-230 Volts AC, 50/60 Hz fitted with Indian plug

We are manufacturer & supplier of Dry Bath Incubator. We are offering Dry Bath Incubator to our valuable customer. The Temperature is totally microprocessor based P.I.D. or Digital Temperature Controller cum Indicator controlled for accurate temperature rating.

• Outer Body: outer chamber develop using high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches.
• Removable anodized aluminum block with provision of holes that can be customized as per the requirements.
• Temperature Range: Few degrees above ambient 60C with temperature accuracy of 0.5C.
• Temperature Controller: The Temperature is totally microprocessor based P.I.D. or Digital Temperature Controller cum Indicator controlled for accurate temperature rating.
• Dry bath has LCD screen that provides for visual indication of all parameters during running
• Block Size: 100mm x 80mm x 50mm.
• Block Capacity: 1.5ml x 8 Tubes, 2.0ml x 8 Tubes, 0.5ml x 8 Tubes.
• Overall Dimension: 130mm (W) x 240mm (D) x 100 mm (H).
• Power: Power input to be 220-230 Volts AC, 50/60 Hz fitted with Indian plug.

We hold expertise in manufacturing and supplying and exporting a superior quality range of water baths. M.K. Scientific Instruments water baths are heated chambers used for many industrial areas applications environmental applications, academic facilities, clinical laboratories, food technology, government research laboratories and waste water facilities etc. by M.K. Scientific Instruments are known as exceptional Water baths specially designed for testing applications. M.K. Scientific Instruments as an experienced Water Bath , Cooling /Refrigerated Water Bath , Lab Constant Temperature Refrigerated Liquid Water Bath , Serological Water Bath , Rectangular Water Bath Double , Rectangular Water Bath Single Wall Electric , Water Bath Shaker Incubator Deluxe , High Precision Water Bath , Tissue Flotation Bath , Oil Bath manufacture in INDIA.

• Double walled
• Inner Body: Inner chamber made of Stainless steel.
• Outer Body: outer chamber develop using high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches.
• Insulation between inner & outer wall with mineral wool/ glass wool thick to avoid any heat loss.
• Comes with glass mercury thermometer based temperature display provision
• Temperature Range: Temperature ranges from few degrees above ambient temperature to 97C 2C.
• Temperature Controller: The Temperature is totally microprocessor based P.I.D., /Thermostat or Digital Temperature Controller cum Indicator controlled for accurate temperature r ating.
• It is Suitable for holding 2, 4, 6, 8 racks
• Power: Power input to be 220-230 Volts AC, 50/60 Hz fitted with Indian plug.
• Safety Feature: Thermostat based safety device.
• Perforated cover of stainless steel based diffuser shelf finish
• Shelves: Stainless steel perforated/wire road shelves adjustable and sliding.
• Heater : Tubular U type air heater

Cooling Incubators by M.K. Scientific Instruments are come with durable and rugged design for delivering excellent quality performance. These units are made with double walled construction and are fully insulated with polyurethane foam to reduce running costs. The exterior chamber is made of high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches. The internal chamber is made of high grade corrosion resistant stainless steel. Each Cooling Incubator is delivered with number of shelves to keep the object in the units. The number of these shelves may vary model to model or size of the unit. Generally 2 to 6 shelves are provided with these units as per size and capacity. These shelves are made of aluminum sheets of stainless steel with polished layer.Temperature Controller: The Temperature is totally microprocessor based P.I.D. or Digital Temperature Controller cum Indicator controlled for accurate temperature rating.

We hold expertise in manufacturing and supplying and exporting a superior quality range of water baths. M.K. Scientific Instruments water baths are heated chambers used for many industrial areas applications environmental applications, academic facilities, clinical laboratories, food technology, government research laboratories and waste water facilities etc. by M.K. Scientific Instruments are known as exceptional Water baths specially designed for testing applications.

• Double walled
• Inner Body: Inner chamber made of Stainless steel.
• Outer Body: outer chamber develop using high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches.
• Insulation between inner & outer wall with mineral wool/ glass wool thick to avoid any heat loss.
• Comes with glass mercury thermometer based temperature display provision
• Temperature Range: Temperature ranges from few degrees above ambient temperature to 97C 2C.
• Temperature Controller: The Temperature is totally microprocessor based P.I.D., /Thermostat or Digital Temperature Controller cum Indicator controlled for accurate temperature rating.
• It is Suitable for holding 2, 4, 6, 8 racks
• Power: Power input to be 220-230 Volts AC, 50/60 Hz fitted with Indian plug.
• Safety Feature: Thermostat based safety device.
• Perforated cover of stainless steel based diffuser shelf finish
• Shelves: Stainless steel perforated/wire road shelves adjustable and sliding.
• Heater : Tubular U type air heater

Temperature is totally microprocessor based PID digital temperature indicator-cum-controller. Temperature Range: Temperature ranges from few degrees above ambient temperature to 95C with temperature accuracy of 0.5C. The exterior chamber is made of high grade mild steel with powder coated finish and The internal chamber is made of high grade corrosion resistant stainless steel.

• Double walled
• Inner Body: Inner chamber made of Stainless steel.
• Outer Body: outer chamber develop using high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches.
• Insulation between inner & outer wall with mineral wool/ glass wool thick to avoid any heat loss.
• System coming fitted with drain plug for allowing easy cleaning support
• Temperature Range: Temperature ranges from few degrees above ambient temperature to 97C 2C.
• Temperature Controller: The Temperature is totally Microprocessor Based PID Digital Temperature Indicator-Cum-Controller based temperature for accurate temperature rating.
• It is Suitable for holding 2, 4, 6, 8 racks
• Power: Power input to be 220-230 Volts AC, 50/60 Hz fitted with Indian plug.
• Perforated cover of stainless steel based diffuser shelf finish
• Heater : Tubular U type air heater

We are manufacturer & supplier of Incubator/ Laboratory incubator. Incubator is one of most important lab equipment in many research centers, hospitals and other pharmaceutical labs, Clinical, Environmental, Biotechnology, Medical, Petroleum, Industrial Applications by M.K. Scientific Instruments are known as exceptional Incubator Shaker specially designed for testing applications. M.K. Scientific Instruments as an experienced manufacture in INDIA,

• Double walled
• Inner Body: Inner chamber made of Stainless steel.
• Outer Body: outer chamber develop using high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches.
• Insulation between inner & outer wall with glass wool/ mineral wool thick to avoid any heat loss.
• Temperature Range: Few degrees above ambient 70C with temperature accuracy of 1C.
• Temperature Controller: The Temperature is totally microprocessor based P.I.D. or Digital Temperature Controller cum Indicator controlled for accurate temperature rating.
• Ventilator: Placed on the middle of both side.
• Air Circulation: Forced convection system through use of blowers & motors that provides for superior mixing as well as strong dispersion.
• Power: Power input to be 220-230 Volts AC, 50/60 Hz fitted with Indian plug.
• Safety Feature: Thermostat based safety device
• Shelves: Stainless steel perforated/wire road shelves adjustable and sliding.
• Door: Door with synthetic rubber gasket & Door has a glass viewer window.
• Heater : Tubular U type air heater

Cooling Incubators by M.K. Scientific Instruments are come with durable and rugged design for delivering excellent quality performance. These units are made with double walled construction and are fully insulated with polyurethane foam to reduce running costs. The exterior chamber is made of high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches. The internal chamber is made of high grade corrosion resistant stainless steel. Each Cooling Incubator is delivered with number of shelves to keep the object in the units. The number of these shelves may vary model to model or size of the unit. Generally 2 to 6 shelves are provided with these units as per size and capacity. These shelves are made of aluminum sheets of stainless steel with polished layer.

• Double walled
• Inner Body: Inner chamber made of Stainless steel.
• Outer Body: outer chamber develop using high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches.
• Insulation between inner & outer wall with polyurethane foam (PUF) to reduce running costs.
• Temperature Range: 5C to 60C with temperature accuracy of 0.5C.
• Temperature Controller: The Temperature is totally microprocessor based P.I.D. or Digital Temperature Controller cum Indicator controlled for accurate temperature rating.
• Air Circulation: Forced convection system through use of blowers & motors that provides for superior mixing as well as strong dispersion.
• Power: Power input to be 220-230 Volts AC, 50/60 Hz fitted with Indian plug.
• Safety Feature: Thermostat based safety device
• Shelves: Stainless steel perforated/wire road shelves adjustable and sliding.
• Door: Door with synthetic rubber gasket & Door has a glass viewer window.
• Heater: Tubular U type air heater.
• Compressor: Hermetically Sealed Air Cooling Compressor (CFC Free).

B.O.D. incubators often called low temperature incubators are one of most important lab equipment in many research centers, hospitals and other pharmaceutical labs. BOD incubators by M.K. Scientific Instruments are known as exceptional lab incubators specially designed for a variety of incubation and testing applications. The series of BOD incubator is perfect for BOD testing and other related jobs of research. Designed to meet customized requirements of different customers, M.K. Scientific Instruments as an experienced BOD Incubator manufacture in INDIA, The Biochemical Oxygen Demand incubator comes in various sizes and capacities.

CONSTRUCTION:BOD incubators by M.K. Scientific Instruments are come with durable and rugged design for delivering excellent quality performance. These units are made with double walled construction and are fully insulated with polyurethane foam to reduce running costs. The exterior chamber is made of high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches. The internal chamber is made of high grade corrosion resistant stainless steel. Cabinet is mounted on castors for easy movement from one place to another.

Shelves:Each Biochemical Oxygen Demand incubator is delivered with number of shelves to keep the object in the units. The number of these shelves may vary model to model or size of the unit. Generally 2 to 4 shelves are provided with these units as per size and capacity. These shelves are made of aluminum sheets of stainless steel with polished layer.

COOLING:Cooling quality is one of important factors that need to be checked before choosing any BOD incubator for effective cooling, M. K. Scientific Instruments CFC free refrigerant.

Doors:The doors of these BOD incubators are available in Glass or solid doors. If you are looking for customized incubator you may ask your choice of doors. Furthermore glass door is more comfortable to use for easy viewing of object inside to be researched.

TEMPERATURE RANGE:These BOD incubators by M.K. Scientific Instruments are come in temperature ranges from 5C to 60C with temperature accuracy of +/- 0.5C and temperature uniformity of +/- 1C. The Controller is totally electronic controlled with Digital display for accurate temperature rating.

SAFETY:To provide proper safety at work place and to enjoy safe use, these units are equipped with various safeties protection devices such as over current protections, leakage breaker and temper controls.

OTHER FEATURES:These units are come with easy to view LED/LCD display, door lock interior lamp, and Tubular air heater with fins heating system and run with 220-230 Volts power supply.

Plant Growth Chamber by M.K. Scientific Instruments is come with durable and rugged design for delivering excellent quality performance. Plant Growth Chamber is made with double walled construction and are fully insulated with polyurethane foam to reduce running costs. The exterior chamber is made of high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches. The internal chamber is made of high grade corrosion resistant stainless steel. Each Plant Growth Chamber is delivered with number of shelves to keep the object in the units. The number of these shelves may vary model to model or size of the unit. Generally 2 to 4 shelves are provided with these units as per size and capacity. These shelves are made of aluminum sheets of stainless steel with polished layer.

• Double walled
• Inner Body: Inner chamber made of Stainless steel.
• Outer Body: outer chamber develop using high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches.
• Insulation between inner & outer wall with polyurethane foam (PUF) to reduce running costs.
• Temperature Range: 5C to 60C with temperature accuracy of 1C as well as humidity control from 55% to 95%
• Illumination: Exterior Illumination with 5 Levels Light Control (0%, 25%, 50%, 75% And 100%).
• Temperature Controller: The Temperature is totally microprocessor based P.I.D. or Digital Temperature Controller cum Indicator controlled for accurate temperature rating.
• Illumination: Exterior Illumination with Fluorescent Tubes.
• Programmable :Timer
• Air Circulation: Forced convection system through use of blowers & motors that provides for superior mixing as well as strong dispersion.
• Safety Feature: Thermostat based safety device
• Shelves: Stainless steel perforated/wire road shelves adjustable and sliding.
• Door: Door with synthetic rubber gasket & Door has a glass viewer window.
• Heater: Tubular U type air heater.
• Compressor: Hermetically Sealed Air Cooling Compressor (CFC Free).
• Humidity: By Steam Process
• Humidity Range: 5% above Ambient From 55% to 95% RH+5%RH at Cool Temperatures.
• Power: Power input to be 220-230 Volts AC, 50/60 Hz fitted with Indian plug.

Orbital Incubators Shaker are design for continues shaking for solution in Erynmeyer flask from 100 ml to 1000 ml at a constant set temperature range ambient + to 70 deg.C the outer body made mild steel, Inner chamber and shaking tray are made of SS 304G with fine finish. Plate- form is fitted with lotus clamps of nylon clamps. The motion of plate - form is by means of heavy duty DC motor with continues variable speed regulator , range 50 to 250 rpm.
. Size 9 Flasks 250-500 ml
. Size 16 Flasks 250-500 ml
. Size 25 Flasks 250-500 ml

We are manufacturer & supplier of Humidity (Stability) Chamber Humidity (Stability) Chamber is one of most important lab equipment in many research centers, hospitals and other pharmaceutical labs, Clinical, Environmental, Biotechnology, Medical, Petroleum, Industrial Applications by M.K. Scientific Instruments are known as exceptional Humidity (Stability) Chamber specially designed for testing applications. M.K. Scientific Instruments as an experienced manufacture in INDIA.

• Double walled
• Inner Body: Inner chamber made of Stainless steel.
• Outer Body: outer chamber develop using high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches.
• Insulation between inner & outer wall with polyurethane foam (PUF) to reduce running costs.
• Temperature Range: 5C above ambient to 60C with temperature accuracy of 0.5C.
• Temperature Controller: The Temperature is totally microprocessor based P.I.D. or Digital Temperature Controller cum Indicator controlled for accurate temperature rating.
• Air Circulation: Forced convection system through use of blowers & motors that provides for superior mixing as well as strong dispersion.
• Power: Power input to be 220-230 Volts AC, 50/60 Hz fitted with Indian plug.
• Safety Feature: Thermostat based safety device
• Shelves: Stainless steel perforated/wire road shelves adjustable and sliding.
• Door: Door with synthetic rubber gasket & Door has a glass viewer window.
• Heater: Tubular U type air heater.
• Compressor: Hermetically Sealed Air Cooling Compressor (CFC Free).

We hold expertise in manufacturing and supplying and exporting a superior quality range of Environmental Chamber. M.K. Scientific Instruments Environmental Chamber specially designed for drying environment of plant and animal growth, determination of di-electric strength, proofness of packed materials, insulation testes of electrical components and many other tests requiring an atmosphere of controlled temperature & humidity. M.K. Scientific Instruments as an experienced manufacture in INDIA.

• Double walled
• Inner Body: Inner chamber made of Stainless steel.
• Outer Body: outer chamber develop using high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches.
• Insulation between inner & outer wall with polyurethane foam (PUF) to reduce running costs.
• Temperature Range: The temperature can be controlled from 10C to 60C 2C and humidity 55% to 95% 5%.
• Temperature Controller: The Temperature is totally microprocessor based P.I.D. or Digital Temperature Controller cum Indicator controlled for accurate temperature rating.
• Compressor: Hermetically Sealed Air Cooling Compressor (CFC Free).
• Air Circulation: Forced convection system through use of blowers & motors that provides for superior mixing as well as strong dispersion.
• Shelves: Stainless steel perforated/wire road shelves adjustable and sliding.
• Door: Door with synthetic rubber gasket & Door has a glass viewer window.
• Heater: Tubular U type air heater.
• Power: Power input to be 220-230 Volts AC, 50/60 Hz fitted with Indian plug.

M.K. Scientific Instruments are come with durable and rugged design for delivering excellent quality performance. These units are made with double walled construction and are fully insulated with mineral wool to reduce running costs. The exterior chamber is made of high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches. The internal chamber is made of high grade corrosion resistant stainless steel.

• Double walled
• Inner Body: Inner chamber made of Stainless steel.
• Outer Body: outer chamber develop using high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches.
• Insulation between inner & outer wall with mineral wool/ glass wool thick to avoid any heat loss.
• System coming fitted with drain plug for allowing easy cleaning support
• Temperature Range: Temperature ranges from few degrees above ambient temperature to 97C 2C.
• Temperature Controller: The Temperature is totally microprocessor based P.I.D., /Thermostat or Digital Temperature Controller cum Indicator controlled for accurate temperature rating.
• It is Suitable for holding 2, 4, 6, 8 racks
• Power: Power input to be 220-230 Volts AC, 50/60 Hz fitted with Indian plug.
• Safety Feature: Thermostat based safety device.
• Perforated cover of stainless steel based diffuser shelf finish
• Heater : Tubular U type air heater

We are manufacturer & supplier of various types of incubators. Incubators are one of most important lab equipment in many research centers, hospitals and other pharmaceutical labs, Clinical, Environmental, Biotechnology, Medical, Petroleum, and Industrial Applications incubators by M.K. Scientific Instruments are known as exceptional lab incubators specially designed for a variety of incubation and testing applications. The series of incubators is perfect for testing and other related jobs of research. By M.K. Scientific Instruments as an experienced Incubator, BOD Incubator, Bacteriological Incubators, Cooling Incubator, Dry Bath Incubator, Incubator Shaker, Laboratory Incubators, Orbital Shaking Incubator manufacture in INDIA. These incubators come in various sizes and capacities such from 28 liters to 450 liters.

• Double walled
• Inner Body: Inner chamber made of Stainless steel.
• Outer Body: outer chamber develop using high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches.
• Insulation between inner & outer wall with glass wool/ mineral wool thick to avoid any heat loss.
• Temperature Range: Few degrees above ambient 70C with temperature accuracy of 1C.
• Temperature Controller: The Temperature is totally microprocessor based P.I.D. or Digital Temperature Controller cum Indicator controlled for accurate temperature rating.
• Ventilator: Placed on the middle of both side.
• Air Circulation: Forced convection system through use of blowers & motors that provides for superior mixing as well as strong dispersion.
• Power: Power input to be 220-230 Volts AC, 50/60 Hz fitted with Indian plug.
• Safety Feature: Thermostat based safety device
• Shelves: Stainless steel perforated/wire road shelves adjustable and sliding.
• Door: Door with synthetic rubber gasket & Door has a glass viewer window.
• Heater : Tubular U type air heater

We are manufacturer & supplier of Ovens. Ovens are one of most important lab equipment in many research centers, hospitals and other pharmaceutical labs, Environmental, Biotechnology, Medical, Petroleum, Industrial Applications by M.K. Scientific Instruments are known as exceptional Hot Air Oven specially designed for testing applications. M.K. Scientific Instruments as an experienced Hot Air Oven/ High Temperature Oven/Industrial Oven/Laboratory Oven/Vacuum Oven / Dying Oven /Bacteriological Oven manufacture in INDIA.

• Double walled.
• Inner Body: Inner chamber made of Stainless steel.
• Outer Body: outer chamber develop using high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches.
• Insulation between inner & outer wall with glass wool/ mineral wool (70 to 100 mm) thick to avoid any heat loss.
• Temperature Range: Temperature ranges from 50C to 250C with temperature accuracy of 2C.
• Temperature Controller: The Temperature is totally microprocessor based P.I.D. or Digital Temperature Controller cum Indicator controlled for accurate temperature rating.
• Air Circulation: Forced convection system through use of blowers & motors that provides for superior mixing as well as strong dispersion.

M.K. Scientific Instruments are come with durable and rugged design for delivering excellent quality performance. These units are made with double walled construction and are fully insulated with mineral wool to reduce running costs. The exterior chamber is made of high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches. The internal chamber is made of high grade corrosion resistant stainless steel.

• Double walled
• Inner Body: Inner chamber made of Stainless steel.
• Outer Body: outer chamber develop using high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches.
• Insulation between inner & outer wall with glass wool/ mineral wool thick to avoid any heat loss.
• Temperature Range: Few degrees above ambient 70C with temperature accuracy of 1C.
• Temperature Controller: The Temperature is totally microprocessor based P.I.D. or Digital Temperature Controller cum Indicator controlled for accurate temperature rating.
• Ventilator: Placed on the middle of both side.
• Air Circulation: Forced convection system through use of blowers & motors that provides for superior mixing as well as strong dispersion.
• Power: Power input to be 220-230 Volts AC, 50/60 Hz fitted with Indian plug.
• Safety Feature: Thermostat based safety device
• Shelves: Stainless steel perforated/wire road shelves adjustable and sliding.
• Door: Door with synthetic rubber gasket & Door has a glass viewer window.
• Heater : Tubular U type air heater

We are ranked amongst the foremost firms that are engaged in offering cooling/refrigerated/chiller water bath. Cooling/refrigerated/chiller water bath used for many industrial areas applications thermal control applications, analytical, diagnostic and research purposes etc. M.K. Scientific Instruments as an experienced Water Baths manufacture in INDIA.

• Double walled
• Inner Body: Inner chamber made of Stainless steel.
• Outer Body: outer chamber develop using high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches.
• Insulation between inner & outer wall with polyurethane foam (PUF) to reduce running costs.
• Temperature Controller: The Temperature is totally microprocessor based P.I.D. or Digital Temperature Controller cum Indicator controlled for accurate temperature rating.
• Safety Feature: Thermostat based safety device
• Compressor: Hermetically Sealed Air Cooling Compressor (CFC Free).
• Power: Power input to be 220-230 Volts AC, 50/60 Hz fitted with Indian plug

We are manufacturer & supplier of Dry Bath Incubator. We are offering Dry Bath Incubator to our valuable customer. The Temperature is totally microprocessor based P.I.D. or Digital Temperature Controller cum Indicator controlled for accurate temperature rating.

• Outer Body: outer chamber develop using high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches.
• Removable anodized aluminum block with provision of holes that can be customized as per the requirements.
• Temperature Range: Few degrees above ambient 60C with temperature accuracy of 0.5C.
• Temperature Controller: The Temperature is totally microprocessor based P.I.D. or Digital Temperature Controller cum Indicator controlled for accurate temperature rating.
• Dry bath has LCD screen that provides for visual indication of all parameters during running
• Block Size: 100mm x 80mm x 50mm.
• Block Capacity: 1.5ml x 8 Tubes, 2.0ml x 8 Tubes, 0.5ml x 8 Tubes.
• Overall Dimension: 130mm (W) x 240mm (D) x 100 mm (H).
• Power: Power input to be 220-230 Volts AC, 50/60 Hz fitted with Indian plug.

We hold expertise in manufacturing and supplying and exporting a superior quality range of water baths. M.K. Scientific Instruments water baths are heated chambers used for many industrial areas applications environmental applications, academic facilities, clinical laboratories, food technology, government research laboratories and waste water facilities etc. by M.K. Scientific Instruments are known as exceptional Water baths specially designed for testing applications. M.K. Scientific Instruments as an experienced Water Bath , Cooling /Refrigerated Water Bath , Lab Constant Temperature Refrigerated Liquid Water Bath , Serological Water Bath , Rectangular Water Bath Double , Rectangular Water Bath Single Wall Electric , Water Bath Shaker Incubator Deluxe , High Precision Water Bath , Tissue Flotation Bath , Oil Bath manufacture in INDIA.

• Double walled
• Inner Body: Inner chamber made of Stainless steel.
• Outer Body: outer chamber develop using high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches.
• Insulation between inner & outer wall with mineral wool/ glass wool thick to avoid any heat loss.
• Comes with glass mercury thermometer based temperature display provision
• Temperature Range: Temperature ranges from few degrees above ambient temperature to 97C 2C.
• Temperature Controller: The Temperature is totally microprocessor based P.I.D., /Thermostat or Digital Temperature Controller cum Indicator controlled for accurate temperature r ating.
• It is Suitable for holding 2, 4, 6, 8 racks
• Power: Power input to be 220-230 Volts AC, 50/60 Hz fitted with Indian plug.
• Safety Feature: Thermostat based safety device.
• Perforated cover of stainless steel based diffuser shelf finish
• Shelves: Stainless steel perforated/wire road shelves adjustable and sliding.
• Heater : Tubular U type air heater

Cooling Incubators by M.K. Scientific Instruments are come with durable and rugged design for delivering excellent quality performance. These units are made with double walled construction and are fully insulated with polyurethane foam to reduce running costs. The exterior chamber is made of high grade mild steel with powder coated finish. This coating keeps safe the unit from rust and normal scratches. The internal chamber is made of high grade corrosion resistant stainless steel. Each Cooling Incubator is delivered with number of shelves to keep the object in the units. The number of these shelves may vary model to model or size of the unit. Generally 2 to 6 shelves are provided with these units as per size and capacity. These shelves are made of aluminum sheets of stainless steel with polished layer.Temperature Controller: The Temperature is totally microprocessor based P.I.D. or Digital Temperature Controller cum Indicator controlled for accurate temperature rating.