Write a Review
Our Products
Jigs, Casting Dies, Die Casting Moulds & Moulding Tools
2 Products availableTables
2 Products availableMeasurement Gauges & Fittings
2 Products availableWe offer the best product range of Rapid Moisture Meter, Plastic Limit Set, Sand Pouring Cylinder and Digital Planimeter.
Using a speedy moisture meter, the moisture content of soils, sand and other fine-grained material can be obtained quickly with reasonable accuracy. The test technique is based on the fact that water will react with calcium carbide to form acetylene gas and the quantity of gas formed is directly proportional to the water present, leaving a surplus of the chemical used in the test. The quantity of acetylene gas produced is indicated on a built-in pressure gauge, which is calibrated in percentage of moisture on wet weight basis.
Moisture contents at which soil has smallest plasticity is called limit. For determination purpose plastic limit is defined as the water content at which a soil will just begin to crumble when rolled in to a thread of 3mm dia. Specification : The complete set consists of one each :
This Apparatus is used for determination of the dry density of compact, fine, medium grained soils and for layers not exceeding 50 cm thickness. A circular hole is dug into the ground, all the soil from within it collected, weighed and dried, and the hole back-filled with a standard uniform sand or fine gravel, poured from a calibrated container for calculating the volume of hole.
Sand Pouring Cylinder, fitted with conical. Funnel and Shutter,
N-Series with the most advanced functions and perfect reliability. The most standard model of "PLACOM" N-Series has made the excitingly highest attainment in the history of Planimeter ever made.Measuring capacity is remarkably enlarged. Measuring by 6-digit pulse count enables to measure 100 times larger accumulative area than ordinary planimeters. Easy calculations of Cumulative and Average Value Measurement. Conversion of Unit and Scale value is made by easy operation. "WONDER", it is a most worthy word to be given to this "PLACOM" N-Series.
Specifications of PLACOM N-Series
| KP-90N | KP-92N | |
|
Type |
Roller Type | |
| With Computing Function | Single Function | |
|
Display |
Liquid Crystal, 8-digit Figures | |
| 13 Symbols | 6 Symbols | |
|
Symbol |
Batt-E, SCALE Memo, Hold cm2, m2, km2, in2, ft2, acre etc. |
Batt-E Memo, Hold cm2, in2, etc. |
|
Converting Function |
Unit and Scale value | Unit(in2, cm2) |
|
Accumulated Measuring Value |
Maximum 10m2(Scale 1:1) | |
|
Measuring Range |
Maximum vertical width: 325mm Horizntal roller rotating length: 30m |
|
|
Accuracy |
Within +/-0.2%(Within +/-2/1000pluses) | |
|
Power Supply |
|
|
|
Operating Duration |
Approx. 30 hours of continuous operation | |
|
Battery Charging Time |
Approx. 15 hours | |
|
Main Unit Weight |
750g | |
|
Accessories |
Supplied AC Adapter and Plastic Case | |
Rajiv H. Kansara (M. K. Instruments)
# 23, Block - A,
First Floor, Radhe Mall,
Gayatri Dairy Road,
Khokhra Circle,
Khokhra,
AHMEDABAD – 380 008.
Gujarat - India. - 380008
Share us via
