Test Rig

Our offered Product range includes HFP 2000, DFP 3000 air filter test rig, MFP 3000 filter test rigs, MFP 4000 filter test rigs and MFP 1000 filter test rigs.

HFP 2000

The HFP 2000 can be used to determine: pressure loss curve for the new mediumfraction separation efficiency orburden and fraction separation efficiency during application of the burdenwithin shortest times reliably and therefore cost-effectively. The aerosol generators are easy to interchange and coordinated with the overall system. As a result, filter tests can be performed quickly and easily with the different test aerosols. With the aid of the light scattering spectrometer Promo 2000, clear and reliable determination of the aerosol concentration and the particle size and therefore a clear determination of the fraction separation efficiency can be ensured. The largely automated setup of the test sequence together with the clearly defined individual components and the individually adjustable sequence programs of the filter test software FTControl combine to deliver the high reliability of our measurement results. DATASHEETBENEFITS Measurement range (size): 0.2 40 mVolume flow: 6.3 75 m3hPower supply: 115230 V, 5060 HzDimensions: 140 150 80 cm (H W D)Inflow velocity: 10 cms 1.2 msTest area of the medium: 177 cm2Aerosols: Liquid aerosols, e. g. DEHSCompressed air supply: 6 8 barg Related Products Microbial air samplersOnline particle sensors

View Complete Details

Ask Latest Price & Details

DFP 3000 Air Filter Test Rig

The newly developed compressed air filter test rig DFP 3000 delivers fully-automated measurements of fraction separation efficiency for compressed air filters under overpressure up to 10 bar, offering better results in the process than ISO 12500. On request we can also supply an additional filter holder for flat filter media. The fraction separation efficiency is measured with the new aerosol spectrometer Promo 3000 P, which is equipped with pressure-resistant welasaerosol sensors for raw gas and clean gas measurements. The system offers the following advantages (among others): Clear determination of the particle size and concentration directly under overpressure up to 10 barAutomatic adjustment of the sampling volume flow in the event of pressure changesNo diffuser, no dilution required The DFP 3000 can be equipped with three different aerosol generators: For measurement of the fraction separation efficiency with oil: PLG 3000For burden tests, short burdening times with oil: AGF 3000For tests with solid particles up to 3 bar: RBG 1000 D The largely automated setup of the test sequence together with the clearly defined individual components and the individually adjustable sequence programs of the filter test software FTControl deliver the high reliability of our measurement results. All air volume flows and the overpressure in the system are automatically monitored and adjusted. The results are presented in detailed form in tables and diagrams and analyzed. With more than 120 complete filter test systems manufactured and delivered in over 16 different versions, Palasis the world-leading manufacturer of filter test systems.

View Complete Details

Ask Latest Price & Details

MFP 3000 Filter Test Rigs

The MFP filter test rig is a modular filter testing system for flat filter media and small mini-filters. This enables you to determine the pressure loss curve on the medium without a dust coating, fraction separation efficiency, orburden and fraction separation efficiency during application of the burdenand the gravimetric separation efficiency within shortest times reliably and therefore cost-effectively. The MFP 3000 operates in suction mode. This ensures a particularly uniform formation of the dust cake even at high inflow speeds. With the aid of the light scattering spectrometer Promo 3000, clear and reliable determination of the aerosol concentration and the particle size and therefore a clear determination of the fraction separation efficiency can be ensured. In addition, use of the welas digital 3000 or Promo 3000 with two sensors for virtually simultaneous particle measurement offers the following advantages: Fully-automatic measurement of fraction separation efficiency

View Complete Details

Ask Latest Price & Details

MFP 4000 Filter Test Rigs

The MFP 4000 operates in suction mode. This ensures a particularly uniform formation of the dust cake even at high inflow speeds. With the new FTControl test rig software of the MFP 4000, the aerosol spectrometer Promo10002000 is used for clear and reliable determination of the aerosol concentration and particle size and therefore clear determination of the fraction separation efficiency.The use of one aerosol spectrometer Promo 10002000 in raw gas and one in clean gas within simultaneous operation offers the following advantages: Fully-automatic simultaneous measurement of fraction separation efficiencyFaster determination of the beginning fraction separation efficiency because of bisection of the testing time for the fraction seperation efficiency.Higher temporal resolution for the measurement of fraction seperation efficiency during loading.Using the testing system for very high and very low aerosol concentrations. The largely automated setup of the test sequence in conjunction with the clearly defined individual components and the individually adjustable sequence programs of the filter test software FTControl combine to deliver the high reliability of our measurement results.

View Complete Details

Ask Latest Price & Details

MFP 1000 Filter Test Rigs

MFP filter test rigs from Palas have already proved themselves many times over all around the world in practical applications in development and quality control. The MFP filter test rig is a modular filter testing system for flat filter media and small mini-filters. The MFP 1000 can be used to determine: pressure loss curve on the medium without a dust coating, fraction separation efficiency, orburden and fraction separation efficiency during application of the burden within shortest times reliably and therefore cost-effectively. The corresponding aerosol generator can be used depending on the standard or application. With the aid of the new light scattering spectrometer Promo 1000, clear and reliable determination of the aerosol concentration and the particle size and therefore a clear determination of the fraction separation efficiency can be ensured. The largely automated setup of the test sequence together with the clearly defined individual components and the individually adjustable sequence programs of the filter test software FTControl combine to deliver the high reliability of our measurement results. As a result, filter tests can be performed quickly and easily with the different test aerosols.

View Complete Details

Ask Latest Price & Details

MFP 2000 Filter Test Rigs

The MFP 2000 can be used to determine: pressure loss curve on the medium without a dust coating, fraction separation efficiency, orburden and fraction separation efficiency during application of the burden within shortest times reliably and therefore cost-effectively. The aerosol generators are easy to interchange and coordinated with the overall system. As a result, filter tests can be performed quickly and easily with the different test aerosols. With the aid of the light scattering spectrometer Promo 2000, clear and reliable determination of the aerosol concentration and the particle size and therefore an accurate determination of the fraction separation efficiency can be ensured. The largely automated setup of the test sequence together with the clearly defined individual components and the individually adjustable sequence programs of the filter test software FTControl combine to deliver the high reliability of our measurement results.

View Complete Details

Ask Latest Price & Details