Other Products / Services #1855772

We are offering Guillotine Dampers.guillotines employ a sliding blade inserted into the duct from an external frame to block flow inrectangular and round ducting. guillotines provide a mechanized means of inserting a duct blanking plate and offer superior isolation of fluegas applications containing heavy particulate loads and are ideal for tight shut off applications. applications : * scrubbers* precipitators* oxidizers* bag houses* heaters miteck performance advantages :: * low pressure drop due to full blade retraction from flow stream* dual chain or rack and pinion drive designed for actuator maximum stall output* reliable man safe isolation with optional seal air system standard design features* self cleaning blade seats for 99.99% sealing efficiency* self lubricated sleeve bearings* maintenance-free drive design* corrosion resistant drive and follower shafts* clean out access* actuator is directly coupled to the drive shaft options* push rod/chest style for high temperature or pressure* spectacle designs* enclosed bonnets* dual blade* seal air systems* position indicators.

We are offering butterfly dampersmiteck offers a complete line of heavy-duty butterfly dampers to meet your requirements. We have installed butterfly dampers as small as 2 diameter, to as large as 120 diameters and more. Our butterfly dampers can be found in some of the harshest environments where abrasion, corrosion and dust-loading are prevalent. Butterfly dampers are not as precise as louver dampers for flow control but can be used for modulation when precision is not critical. For more precise flow control applications, opposed multi blade circular louver dampers can be used. miteck offers many configurations to meet your application.also offering guillotine dampers, industrial damper, damper valves, louver damper, air damper, motorized damper, diverter valve and duct damper. isolation applications: round butterfly: sealing efficiencies for rectangular butterfly dampers range from 99.00% to 99.75% and 100% with seal air multi-blade louver dampers offer sealing efficiencies from 98.00% to 99.50% and 100% in double louver configurationsguillotine dampers provide sealing efficiencies from 99.75% without seal air and 100% with seal air operating times range from to 1 sec. For louvers, 1 sec. For butterflies, and 10 sec min and are size dependent for guillotines static pressure loss is minimal with guillotine dampers and greatest with louver damperslouver dampers are available in parallel or opposed blade configurations for improved flow control where sealing efficiency is important but improved control is also desired. rectangular butterfly: sealing efficiencies for rectangular butterfly dampers range from 99.00% to 99.75% and 100% with seal airmulti-blade louver dampers offer sealing efficiencies from 98.00% to 99.50% and 100% in double louver configurations (w/seal air)operating times range from to 1 sec. For louvers, 1 sec. For butterflies, and 10 sec min and are size dependent for guillotineslouver dampers are more costly than butterflies but less than guillotines control applications: round flange butterfly damper: flow control of gas in round ducts is best accomplished with round opposed-blade butterfly dampers provide excellent control of static pressure and volume in mid-range, but less than adequate low-flow control when compared to opposed-blade louvers radial vane dampers are preferred for control of gas entering centrifugal or radial fans flap diverter dampers are designed to control flow during startup of waste heat equipment positioning devices with analog or digital inputs are available to maintain reliable flow control on most damper configurations rectangular flange butterfly damper : opposed-blade louver dampers provide superior control of static pressure and volume for rectangular duct applications increasing the number of opposed-blades between 2 through 6 generally improves flow control characteristicsdesigned to control flow during startup of waste heat equipment positioning devices with analog or digital inputs are available to maintain reliable flow control on most damper configurations.

Miteck Systems

Miteck Systems

HomeDampersGuillotine Dampers

Guillotine Dampers

Introduction

Guillotine damper are typically specified for gas shut-off of ducts and they are commonly installed in furnaces, heaters, reformers and other chemical and petrochemical application or cement industry as well as isolators downstream diverters in GT exhaust systems or any other heavy duty industrial application.

Guillotine damper employ a sliding blade inserted into the duct from an external frame to block flow in

rectangular and round ducting. Guillotine damper provide a mechanized means of inserting a duct

blanking plate and offer superior isolation of flue gas applications containing heavy particulate

loads and are ideal for tight shut off applications.

Technical Specification

Features

Downloads

Since 1996 Miteck systems have earned a reputation on designing & manufacturing of guillotine dampers also we have expertise in Butterfly damper, poppet damper, lover damper, Hoisting damper, Recently we have supplied Marine ship scrubber gas dampers which are approved by American Bureau of the society of shipping,

please send us an email on info@mitecksystems.com for more information

Guillotine DamperGuillotine Damper 2 1guillotine2

1

2

3

Previous

Next

2023 Miteck Systems. All rights reserved.

Shopping Basket

Baghouse Dust Collectors can be used for a variety of applications while providing dependable, long life-cycle, maintenance free performance. These are some of the most efficient and cost effective dust collector models for capture of heavy dust quantities such as from bin venting and for applications like product reclamation. In Baghouse Dust Collectors, the dust filled air stream passes through fabric bags that filter the dust particles. High-pressure cleaning air is also blown periodically in the reverse or opposite direction of the dust-laden stream, to clean the dust cake that would form on the filter surface. This system known as a reverse pulse jet system is continuous or online. In these dust collectors, cleaning will be done continuously without interrupting the process.

We are offering Screw Sampler Type SMX is designed to create an average sample from continuous extraction of dry, non-sticky powdered material from a free falling flow of materials. The continuously operating sampler is driven by a geared motor, coupled to a transport screw crossing the flow of material. The screw transports the extracted material to a mixing tank, where it is homogenized by mixer wings connected to the through going screw conveyor shaft. The sampler can be delivered with the drive unit installed next to the mixing tank for installation on the opposite side of the chute. The mixed test sample is extracted manually from the mixing tank into a beaker. (Volume approx. 1.4 liters) and the mixing tank content is manually discharged afterwards. This mixer design ensures that the material at any time present in the mixer tank will represent a true average of the material having passed the sampler, since the mixing tank was last emptied. The mixing tank has an overflow to safeguard against overfilling. Excess sample material is returned to the main material stream by gravity. The mixing tank is provided with an observation window. The standard SMX sampler is not suited for installation in pressure systems. As an option the screw sampler can be provided with a pneumatic cylinder for automatic discharge of the mixer tank content into the reject chute where optional equipment like dosing unit for automatic tube post sending/receiving station can be installed. For special purposes the SMX sampler can be provided with variable speed drive. The sampler can be mounted in a chute with max. 30 inclination, either rectangular or circular. * BUILT FOR HEAVY-DUTY SERVICE IN APPLICATIONS INVOLVING : 1. Elevated Temperatures 2. Highly Abrasive Products 3. Wide Pressure Differentials 4. Irregularly Shaped Products 5. Oversized Materials Standard outside chute dimensions :A = 250, 315, 355, 400, 450, 500, 560, 630 or 710 mm.

The Miteck systems pug mill is applicable to many industries. Where pollution control is a factor, the mill effectively blends dustrecovered from such equipment as electrostatic precipitators, mechanical collectors and bag houseswith various liquids, thus allowing transport without the particulate matter escaping into the air. The Miteck systems also lets yourecover valuable elements such as lead, iron and copper and return them to the process stream. This is especially beneficial in sintering, as it returns the recovered dust to the processproviding a closed circuit. DESIGN FEATURES AND BENEFITS : * The Miteck systems pug mill is fabricated from steel plate /Mild steel with a rigid base frame. Removable cover plates provide easy access to internal section. * Top feed opening can be modified to mate with equipment supplied by other manufactures. * Paddle shafts, flanged at both ends, simplify maintenance; permit removal of entire assembly. * Reversible paddle bases are bolted in pairs to paddle shafts. Abrasion-resistant, bolt-on paddles insure maximum wear life. * Positive, grease-lubricated dual seals are used on stub shafts where they pass through the mixer box at both feed and discharge ends. * Timing gears are sealed in a heavy duty oil bath case which features fill and drain points and an oil level gauge. These gears allow for paddle intermeshing which provides a vigorous mixing action. * The four spray pipes are connected to a common header and are equipped with spray nozzles. Individual control valves meter the proper amount of various wetting agents to each pipe. Relevant Industries : * CEMENT* STEEL* POWER GENERATION

We are offering Cone Valve.Double Cone type Flap Valves are basically Bulk Material Handling equipment.They are used for the Feeding/discharging of powders, chips, or any type of granules. They are capable of discharging material without disturbing the system pressure. As thedust particles collects in the hopper, the weight of the material pushes down on the counter weight of the top flap and dust discharges down wards. The top flange closes and the bottom flap opens to allow material to fall out and be removed. These can be motorizedor pneumatically actuated. They can be made in various types of materials of constructionas- Stainless steel, Mild steel, Wear resistant steel etc. depending upon the application. The photograph shown below gives the basic construction idea of the Double cone type Flap Valve.