Post Buy Requirement
Minmax Electronics
Bangalore, Karnataka, India
gstGST : 29ACLPR6128B1ZG Verified Add Review

Testing Equipment #4693150

Our product range contains a wide range of MME ADIT 40 Analog and Digital IC Tester, Linear IC Functional Tester, electronic components tester, MME DIT 20 Digital IC Tester and MME-DIT 2040 Digital IC Tester

MME ADIT 40 Analog And Digital IC Tester

  • Voltage 230V 50Hz +/- 10%
  • Display 16x2 Backlit Alphanumeric LCD
  • Keyboard 24 Keys Membrane Keyboard
  • Package Digital ICs 14, 16, 20, 24, 28 & 40 Pin DIP and Analog/Linear ICs 6, 8, 14, 16 & 20 Pin DIP
  • Method Output Test with Simulated Inputs and At Nominal Load Truth Table Comparison
  • Sockets 20 Pin ZIF for Linear and 40 Pin Universal ZIF for Digital ICS.
  • Enclosure Sheet Metal Box with Powder Coating and Engraving.

MME-ADIT 40 is the latest MICROPROCESSOR based IC Tester from MINMAX ELECTRONICS. It functionally tests a wide variety of digital ICs up to 40 pins and Linear/Analog ICs up to 20 pins.

Digital IC Range:
74 series of TTL ICs, 40 and 45 series of CMOS ICs, Microprocessors (8085, 8086, 8088, Z80, 6502) Peripheral ICs (8255, 8253, 8251, 8259, 8155, 8279, Z80 PIO) EPROMs (blank check only), RAM ICs 6116, 6264, 62256 etc.

View Complete Details

Linear IC Functional Tester

  • Voltage 230 Volts +- 10% 50 Hz AC.
  • Weight 3.5 Kgs Approximately.
  • Package LINEAR ICs and Analog & Digital combined ICs of 6, 8, 10, 14, 16, 18, 20 pins dual in line.(also round pack if inserted after bending leads to suit DIP).
  • Method Output Test with Simulated Inputs and At Nominal Loads. It Performs Only Functional Test and Not Par
  • Socket 20 pin DIP ZIF
  • Keyboard 24 Feather Touch Keys
  • Display 16 Character LCD Dot Matrix Display.
  • Enclosure Sheet Metal Box with Powder Coating and Screen Printing.
  • Dimensions 25*24*6 cm^3

MME LICT 20 is the Microprocessor controlled LINEAR IC FUNCTIONAL TESTER from MINMAX ELECTRONICS. It functionally test a variety of linear ICs including commonly used Operational amplifiers, Comparators, Transistor arrays, Optocouplers, Analog switches, Multiplexer, Voltage followers, Timers, A to D converters, D to A converters, cross point switches and other selected special function analog ICs.

Features:

  • No personality cards/reference IC/IC data required
  • Automatically testing of IC after entering the IC number No wiring is required.
  • CONtinous mode for testing ICs until ABORTed. Number of times the test was successful is displayed.
  • STEP mode to locate faulty pin through discrete LED's for ICs up to 20 pins.
  • Auto Search to find the number of unknown good digital IC with facility to locate its functional equivalents for ICs up to 20 pins.
  • Buzzer to indicate bad IC
  • Separate field for display of mode of operation(ONE/CON/STP).
  • Remembers IC Numbers for repeated testing of same IC.
  • SELFTEST facility during power ON and through keyboard.
  • Potential free 20 pin and 40 pin ZIF(Zero Insertion Force) sockets.
  • HELP key for short description of the various key functions.
  • Computer interface through RS232C for enhancement of IC test library.

 

View Complete Details

Electronic Components Tester

  • Application Control Panels, Industrial Use, Power Grade Use
  • Color Green
  • Automatic Grade Automatic
  • Power Source Battery, Electric
  • Digital ICS Pin 40 Pins
  • Linear/Analog ICs Pin Up to 20 Pins
  • Quality Optimum Quality
  • Technical Name MME-ECT 20 Electronic Components Tester

MME-ADIT 40 is the latest MICROPROCESSOR based IC Tester from MINMAX ELECTRONICS. It functionally tests a wide variety of digital ICs up to 40 pins and Linear/Analog ICs up to 20 pins.

View Complete Details

MME DIT 20 Digital IC Tester

  • Type of ICs Covered Digital ICs and selected miscellaneous ICs of 14, 16 and 20 pin DIP (Dual In Line)
  • Socket Provided 20 pin DIP ZIF Socket
  • Test Range Logical Gates, Counters, Flip-flops, Buffers, Latches, Shift Registers, Encoders, Decoders Etc
  • Test Method One Mode Test Ic Once, Cont Mode to Continuously Test Ic in Loop, Step Mode Test Ic in Single Step
  • Duration of Testing Depends On the Complexity of the IC
  • Supply Votlage 230V AC 50Hz +- 10%
View Complete Details

MME-DIT 2040 Digital IC Tester

  • Voltage 230 volts + 10% 50Hz, AC
  • Weight 4.5 Kgs Approximately.
  • Package Digital ICs of 14, 16, 18, 20, 24, 28 & 40 pins dual in line.
  • Range Tristate, Open Collector & Bidirectional TTL/CMOS ICs.
  • Method Truth Table Comparison.
  • Sockets 20 and 40 pin ZIF.
  • Keyboard 24 Feather Touch Keys.
  • Display 16 Digit 0.5" Seven Segment LED Display.
  • Enclosure Sheet Metal Box with Power Coating and Engraving
  • Dimensions 31*30*8 cm^3.

It is microprocessor based digital IC tester from Minmax Electronics .Its functionality tests a variety of digital ICs including Microprocessor, Peripheral IC's, EPROMs, RAMs etc., apart from the standard 74 & 54 series of TTL ICs and 40 & 45 series of CMOS ICs.

Features:

  • No personality cards/reference IC/IC data required
  • Automatically testing of IC's at 4.75 & 5.25V to locate marginally bad ICs
  • Continous mode for testing ICs until ABORTED. Number of times the test was successful is displayed.
  • STEP mode to locate faulty pin through discrete LED's for ICs up to 20 pins.
  • Auto Search to find the number of unknown good digital IC with facility to locate its functional equivalents for ICs up to 20 pins.
  • Memory test for EPROM indicates non blank location address with data content. For RAMs bad location address is displayed.
  • Buzzer to indicate bad IC
  • Separate field for display of mode of operation(ONE/CON/STP).
  • Current drawn is displayed in a separate field for GOOD ICs.
  • Backspace, clear and double digit entry keys for editing IC number.
  • Remembers IC Numbers for repeated testing of same IC.
  • SELFTEST facility during power ON and through keyboard.
  • Potential free 20 pin and 40 pin ZIF(Zero Insertion Force) sockets.
  • Protection against wrong insertion of IC under test.

 

View Complete Details

MME-UIT 40 Universal IC Tester

  • Certification ISO 9001:2008 Certified
  • Application Ic Testing
  • Driven Type Battery, Electric
  • Serial Interface Type RS232 serial interface for expansion of IC Test Library
  • Buzzer Mode Yes Buzzer to Indicate Bad ICS
  • ZIF Socket Potential free 40 pin ZIF Socket for Easy Insertion of IC under Test
  • Display LCD Display

MME-UIT 40 is the latest Microcontroller based UNIVERSAL IC TESTER from Minmax Electronics. It functionally tests a wide variety of Analog/Linear ICs including ADC, DAC, DPM ICs, Op Amps, Transistor arrays, waveform generators and Digital ICs including Microprocessors, Microcontrollers, EPROMs, RAMs, Peripheral devices apart from 74 series of TTL ICs and 40/45 series of CMOS ICs.

View Complete Details

MME-UT 20 Universal Tester With LCR Meter

  • Application Indsustrial Usage, LCR Monitor
  • Power Source Battery, Electric
  • Voltage 230V AC 50 Hz+-10%
  • Display 40*2 Backlit Alphanumeric LCD
  • Keyboard 24 Keys Membrane Keyboard.
  • Test Range Digital & Linear ICs 6, 8, 14, 16, 20 pin in DIP pack. Active & Passive Components
  • Enclosure Sheet Metal Cabinet with Powder Coating and Engraving.

MME - UT 20 is the latest Microcontroller based Universal IC tester with LCR Meter from Minmax Electronics. It functionally tests 74 series of TTL ICs 40 & 45 series of CMOS ICs, Analog/Linear ICs op amps, comparators, timers, transistor arrays, ADC, DAC etc., It also tests components like diode, transistors, UJT, FET, SCR, Displays, Regulators (78/79) and DIP relays. It also measures the values of Inductance (L), Capacitance(C) and Resistance(R). MME-UT 20 has Rs232 Serial Interface through which IC test Library could be expanded.

View Complete Details

Universal Ic Testers

27,000 - 33,000 /Piece Get Latest Price
  • Min. Order (MOQ) 1 Piece(s)
  • Color Siemens Grey
  • Product components tester
  • MOQ 1 no.

universal ic tester functionally checks the ics for its goodness.

it is an automatic ic tester which require no details of the ic etc.,

also no wiring is required. to test an ic, just enter the number

and after inserting the ic in the zif socket, press test key to find

the goodness of the ic. if the ic passes the test, good is displayed

else bad is displayed in the lcd display with a buzzer sound.

it is easy to operate unit. it has to other functions also like cable tester,

word processor, incircuit ic testing (limited library) and pc interface.

Additional Information:

Payment Terms : T/T

Packaging Details : Cardboard box packing with all round theromocole is provided.

Delivery Time : 3 weeks

View Complete Details

MME HDIT 20 Hand Held Digital IC Tester

  • Automation Grade Automatic
  • Power Optional Adopter to Operate from 230v Ac
  • Operated Type Battery Operated
  • Function Compact and Easy to Operate
  • Keypad Number 12 Keys Keypad for Entering the IC Number
  • Display Type 16 Character high contrast LCD display
  • Quality Optimum Quality
  • Cabinet Compact, Light Weight Al Cabinet

MME-HDIT 20 is the latest Microcontroller controlled hand held digital IC Tester from MINMAX ELECTRONICS. It tests the standard 54/74/40/45 series of digital ICs, few linear ICs, analog switches and dynamic RAMs up to 20 pins. It is fully automatic requiring no reference IC etc., It is battery operated and compact making it ideal for field servicing.

View Complete Details

Linear Ic Tester

  • Voltage 230V 50Hz +/- 10%
  • MODEL NO MME-ADIT 40
MME-ADIT 40 is the latest MICROPROCESSOR based IC Tester from MINMAX ELECTRONICS. It functionally tests a wide variety of digital ICs up to 40 pins and LinearAnalog ICs up to 20 pins.Operational Amplifiers, Comparators, Transistor Arrays, Optocouplers, Analog Switches, Multiplexers, Voltage followers, timers, cross point switches, ADC, DAC etc.,
View Complete Details

Universal Ic Tester

  • MODEL NO MME-UIT 40
MME-UIT 40 is the latest Microcontroller based UNIVERSAL IC TESTER from Minmax Electronics. It functionally tests a wide variety of AnalogLinear ICs including ADC, DAC, DPM ICs, Op Amps, Transistor arrays, waveform generators and Digital ICs including Microprocessors, Microcontrollers, EPROMs, RAMs, Peripheral devices apart from 74 series of TTL ICs and 4045 series of CMOS ICs.
View Complete Details

Digital Ic Tester

  • MODEL NO MME-DIT 2040
  • Dimensions 31*30*8 cm^3.

It is microprocessor based digital IC tester from Minmax Electronics .Its functionality tests a variety of digital ICs including Microprocessor, Peripheral IC's, EPROMs, RAMs etc., apart from the standard 74 & 54 series of TTL ICs and 40 & 45 series of CMOS ICs. Sheet metal box with power coating and engraving, Tristate, Open Collector & Bidirectional TTLCMOS ICs.

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

Retailer of Testing Equipment from Bangalore, Karnataka by Minmax Electronics
Post Buy Requirement
Minmax Electronics
gstGST : 29ACLPR6128B1ZG Verified Add Review

Testing Equipment

We are leaders in the market for providing best range of MME ADIT 40 Analog and Digital IC Tester, Linear IC Functional Tester, electronic components tester, MME DIT 20 Digital IC Tester and MME-DIT 2040 Digital IC Tester

MME ADIT 40 Analog And Digital IC Tester

  • Voltage 230V 50Hz +/- 10%
  • Display 16x2 Backlit Alphanumeric LCD
  • Keyboard 24 Keys Membrane Keyboard
  • Package Digital ICs 14, 16, 20, 24, 28 & 40 Pin DIP and Analog/Linear ICs 6, 8, 14, 16 & 20 Pin DIP
  • Method Output Test with Simulated Inputs and At Nominal Load Truth Table Comparison
  • Sockets 20 Pin ZIF for Linear and 40 Pin Universal ZIF for Digital ICS.
  • Enclosure Sheet Metal Box with Powder Coating and Engraving.

MME-ADIT 40 is the latest MICROPROCESSOR based IC Tester from MINMAX ELECTRONICS. It functionally tests a wide variety of digital ICs up to 40 pins and Linear/Analog ICs up to 20 pins.

Digital IC Range:
74 series of TTL ICs, 40 and 45 series of CMOS ICs, Microprocessors (8085, 8086, 8088, Z80, 6502) Peripheral ICs (8255, 8253, 8251, 8259, 8155, 8279, Z80 PIO) EPROMs (blank check only), RAM ICs 6116, 6264, 62256 etc.

View Complete Details

Linear IC Functional Tester

  • Voltage 230 Volts +- 10% 50 Hz AC.
  • Weight 3.5 Kgs Approximately.
  • Package LINEAR ICs and Analog & Digital combined ICs of 6, 8, 10, 14, 16, 18, 20 pins dual in line.(also round pack if inserted after bending leads to suit DIP).
  • Method Output Test with Simulated Inputs and At Nominal Loads. It Performs Only Functional Test and Not Par
  • Socket 20 pin DIP ZIF
  • Keyboard 24 Feather Touch Keys
  • Display 16 Character LCD Dot Matrix Display.
  • Enclosure Sheet Metal Box with Powder Coating and Screen Printing.
  • Dimensions 25*24*6 cm^3

MME LICT 20 is the Microprocessor controlled LINEAR IC FUNCTIONAL TESTER from MINMAX ELECTRONICS. It functionally test a variety of linear ICs including commonly used Operational amplifiers, Comparators, Transistor arrays, Optocouplers, Analog switches, Multiplexer, Voltage followers, Timers, A to D converters, D to A converters, cross point switches and other selected special function analog ICs.

Features:

  • No personality cards/reference IC/IC data required
  • Automatically testing of IC after entering the IC number No wiring is required.
  • CONtinous mode for testing ICs until ABORTed. Number of times the test was successful is displayed.
  • STEP mode to locate faulty pin through discrete LED's for ICs up to 20 pins.
  • Auto Search to find the number of unknown good digital IC with facility to locate its functional equivalents for ICs up to 20 pins.
  • Buzzer to indicate bad IC
  • Separate field for display of mode of operation(ONE/CON/STP).
  • Remembers IC Numbers for repeated testing of same IC.
  • SELFTEST facility during power ON and through keyboard.
  • Potential free 20 pin and 40 pin ZIF(Zero Insertion Force) sockets.
  • HELP key for short description of the various key functions.
  • Computer interface through RS232C for enhancement of IC test library.

 

View Complete Details

Electronic Components Tester

  • Application Control Panels, Industrial Use, Power Grade Use
  • Color Green
  • Automatic Grade Automatic
  • Power Source Battery, Electric
  • Digital ICS Pin 40 Pins
  • Linear/Analog ICs Pin Up to 20 Pins
  • Quality Optimum Quality
  • Technical Name MME-ECT 20 Electronic Components Tester

MME-ADIT 40 is the latest MICROPROCESSOR based IC Tester from MINMAX ELECTRONICS. It functionally tests a wide variety of digital ICs up to 40 pins and Linear/Analog ICs up to 20 pins.

View Complete Details

MME DIT 20 Digital IC Tester

  • Type of ICs Covered Digital ICs and selected miscellaneous ICs of 14, 16 and 20 pin DIP (Dual In Line)
  • Socket Provided 20 pin DIP ZIF Socket
  • Test Range Logical Gates, Counters, Flip-flops, Buffers, Latches, Shift Registers, Encoders, Decoders Etc
  • Test Method One Mode Test Ic Once, Cont Mode to Continuously Test Ic in Loop, Step Mode Test Ic in Single Step
  • Duration of Testing Depends On the Complexity of the IC
  • Supply Votlage 230V AC 50Hz +- 10%
View Complete Details

MME-DIT 2040 Digital IC Tester

  • Voltage 230 volts + 10% 50Hz, AC
  • Weight 4.5 Kgs Approximately.
  • Package Digital ICs of 14, 16, 18, 20, 24, 28 & 40 pins dual in line.
  • Range Tristate, Open Collector & Bidirectional TTL/CMOS ICs.
  • Method Truth Table Comparison.
  • Sockets 20 and 40 pin ZIF.
  • Keyboard 24 Feather Touch Keys.
  • Display 16 Digit 0.5" Seven Segment LED Display.
  • Enclosure Sheet Metal Box with Power Coating and Engraving
  • Dimensions 31*30*8 cm^3.

It is microprocessor based digital IC tester from Minmax Electronics .Its functionality tests a variety of digital ICs including Microprocessor, Peripheral IC's, EPROMs, RAMs etc., apart from the standard 74 & 54 series of TTL ICs and 40 & 45 series of CMOS ICs.

Features:

  • No personality cards/reference IC/IC data required
  • Automatically testing of IC's at 4.75 & 5.25V to locate marginally bad ICs
  • Continous mode for testing ICs until ABORTED. Number of times the test was successful is displayed.
  • STEP mode to locate faulty pin through discrete LED's for ICs up to 20 pins.
  • Auto Search to find the number of unknown good digital IC with facility to locate its functional equivalents for ICs up to 20 pins.
  • Memory test for EPROM indicates non blank location address with data content. For RAMs bad location address is displayed.
  • Buzzer to indicate bad IC
  • Separate field for display of mode of operation(ONE/CON/STP).
  • Current drawn is displayed in a separate field for GOOD ICs.
  • Backspace, clear and double digit entry keys for editing IC number.
  • Remembers IC Numbers for repeated testing of same IC.
  • SELFTEST facility during power ON and through keyboard.
  • Potential free 20 pin and 40 pin ZIF(Zero Insertion Force) sockets.
  • Protection against wrong insertion of IC under test.

 

View Complete Details

MME-UIT 40 Universal IC Tester

  • Certification ISO 9001:2008 Certified
  • Application Ic Testing
  • Driven Type Battery, Electric
  • Serial Interface Type RS232 serial interface for expansion of IC Test Library
  • Buzzer Mode Yes Buzzer to Indicate Bad ICS
  • ZIF Socket Potential free 40 pin ZIF Socket for Easy Insertion of IC under Test
  • Display LCD Display

MME-UIT 40 is the latest Microcontroller based UNIVERSAL IC TESTER from Minmax Electronics. It functionally tests a wide variety of Analog/Linear ICs including ADC, DAC, DPM ICs, Op Amps, Transistor arrays, waveform generators and Digital ICs including Microprocessors, Microcontrollers, EPROMs, RAMs, Peripheral devices apart from 74 series of TTL ICs and 40/45 series of CMOS ICs.

View Complete Details

MME-UT 20 Universal Tester With LCR Meter

  • Application Indsustrial Usage, LCR Monitor
  • Power Source Battery, Electric
  • Voltage 230V AC 50 Hz+-10%
  • Display 40*2 Backlit Alphanumeric LCD
  • Keyboard 24 Keys Membrane Keyboard.
  • Test Range Digital & Linear ICs 6, 8, 14, 16, 20 pin in DIP pack. Active & Passive Components
  • Enclosure Sheet Metal Cabinet with Powder Coating and Engraving.

MME - UT 20 is the latest Microcontroller based Universal IC tester with LCR Meter from Minmax Electronics. It functionally tests 74 series of TTL ICs 40 & 45 series of CMOS ICs, Analog/Linear ICs op amps, comparators, timers, transistor arrays, ADC, DAC etc., It also tests components like diode, transistors, UJT, FET, SCR, Displays, Regulators (78/79) and DIP relays. It also measures the values of Inductance (L), Capacitance(C) and Resistance(R). MME-UT 20 has Rs232 Serial Interface through which IC test Library could be expanded.

View Complete Details

Universal Ic Testers

27,000 - 33,000 /Piece Get Latest Price
  • Min. Order (MOQ) 1 Piece(s)
  • Color Siemens Grey
  • Product components tester
  • MOQ 1 no.

universal ic tester functionally checks the ics for its goodness.

it is an automatic ic tester which require no details of the ic etc.,

also no wiring is required. to test an ic, just enter the number

and after inserting the ic in the zif socket, press test key to find

the goodness of the ic. if the ic passes the test, good is displayed

else bad is displayed in the lcd display with a buzzer sound.

it is easy to operate unit. it has to other functions also like cable tester,

word processor, incircuit ic testing (limited library) and pc interface.

Additional Information:

Payment Terms : T/T

Packaging Details : Cardboard box packing with all round theromocole is provided.

Delivery Time : 3 weeks

View Complete Details

MME HDIT 20 Hand Held Digital IC Tester

  • Automation Grade Automatic
  • Power Optional Adopter to Operate from 230v Ac
  • Operated Type Battery Operated
  • Function Compact and Easy to Operate
  • Keypad Number 12 Keys Keypad for Entering the IC Number
  • Display Type 16 Character high contrast LCD display
  • Quality Optimum Quality
  • Cabinet Compact, Light Weight Al Cabinet

MME-HDIT 20 is the latest Microcontroller controlled hand held digital IC Tester from MINMAX ELECTRONICS. It tests the standard 54/74/40/45 series of digital ICs, few linear ICs, analog switches and dynamic RAMs up to 20 pins. It is fully automatic requiring no reference IC etc., It is battery operated and compact making it ideal for field servicing.

View Complete Details

Linear Ic Tester

  • Voltage 230V 50Hz +/- 10%
  • MODEL NO MME-ADIT 40
MME-ADIT 40 is the latest MICROPROCESSOR based IC Tester from MINMAX ELECTRONICS. It functionally tests a wide variety of digital ICs up to 40 pins and LinearAnalog ICs up to 20 pins.Operational Amplifiers, Comparators, Transistor Arrays, Optocouplers, Analog Switches, Multiplexers, Voltage followers, timers, cross point switches, ADC, DAC etc.,
View Complete Details

Universal Ic Tester

  • MODEL NO MME-UIT 40
MME-UIT 40 is the latest Microcontroller based UNIVERSAL IC TESTER from Minmax Electronics. It functionally tests a wide variety of AnalogLinear ICs including ADC, DAC, DPM ICs, Op Amps, Transistor arrays, waveform generators and Digital ICs including Microprocessors, Microcontrollers, EPROMs, RAMs, Peripheral devices apart from 74 series of TTL ICs and 4045 series of CMOS ICs.
View Complete Details

Digital Ic Tester

  • MODEL NO MME-DIT 2040
  • Dimensions 31*30*8 cm^3.

It is microprocessor based digital IC tester from Minmax Electronics .Its functionality tests a variety of digital ICs including Microprocessor, Peripheral IC's, EPROMs, RAMs etc., apart from the standard 74 & 54 series of TTL ICs and 40 & 45 series of CMOS ICs. Sheet metal box with power coating and engraving, Tristate, Open Collector & Bidirectional TTLCMOS ICs.

View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us