Our Products
Mirrors, Glassware & Glass Artware
1 Products availableAbrasives & Grains
1 Products availableSpray Nozzles
1 Products availableTapes
1 Products availableSewing Accessories
1 Products availableOur product range contains a wide range of Cellulose Nitrate Membrane Sheets
Individual sterile pack filters used for routine water microbiology, quality control, particulate and colony count. Grid printed on surface of membrane to facilitate counting of particular load and colonies especially for higher bacterial counts and for micro colonies. Printing does not influence the growth. It has out standing recovery rate for Micro organism. Membranes are pre sterilized and ready to use. Grided Membranes are also used for testing of fecal coli form concentration.
Technical Specifications
Block Size | Growth per motion test as Per ASTMD-4200-82 |
Thermal Stability | Gamma irradiation |
---|---|---|---|
3.1 mm2 | Membranes are tested and validated for no enhancement or inhibition by the Grid lines due to chemicals extractable. | 121 0C | 26.59 K. gray |
Ordering Information
Grade | Pore Size (μm) |
Diameter (mm) |
Pack Size |
---|---|---|---|
PS | 0.22 | 47 mm | 100 |
0.45 | 47 mm | 100 | |
0.8 | 47 mm | 100 | |
1.2 | 47 mm | 100 |
Please Specify Particulars Say For:
Minipore Blotting Membranes are thin white porous uniform structures, fabricated to suit transfer and hybridization of Biological molecules. Substrate based on support to enhance mechanical strength. Unsupported pure cellulose Nitrate Membrane is available in different sizes. Parameters to assure quality adhered strictly. Membrane fabricated under very control & sensitive atmosphere to keep pace with quality and critical requirement of customers.
Characteristics :
Ordering Information
Grade | Pore Size (μm) | Dimension | ||||
CN | 0.45,0.22 | Disc (mm) | Sheet (cm) | Roll (cm) | ||
90 | 142 | 20X20 | 30X30 | 30X300 | ||
CNJ | 0.45,0.22 | 90 | 142 | 20X20 | 30X30 | 30X300 |
NN | 0.45,0.22 | 90 | 142 | 20X20 | 30X30 | 30X300 |
Packaging | - | 25 | 25 | 25 | 25 | 1 |
Packing: Wettability is crucial part of whole binding exercise, our special packing helps to maintain good wettability over longer period.
Please Specify Particulars Say For
Cellulose Extraction Thimbles are manufactured from high quality cellulose. Only Virgin material is used. Seamless structure have excellent, retention and mechanical strength. High purity of material ensures reproducible result. Thimbles are used for quantization of single components in food, plastics and air.
Feature:
Specification
Grade | Pressure drop mmH2O@5lpm |
Weight g/pc |
Retention efficiency | Nominal rating (μm) |
Maximum Operating Temp. |
---|---|---|---|---|---|
CFT | 9 | 2.6 (28x100mm) | 89% | 7 | 120oC |
Ordering Information:
Grade | Size (IDxEL) mm | Packaging | |
---|---|---|---|
CFT | 22x80 | 25 /Pkg. | ID=Internal Diameter EL=External Length |
25x80 | 25 /Pkg. | ||
28x80 | 25 /Pkg. | ||
30x80 | 25 /Pkg. | ||
33x80 | 25 /Pkg. | ||
19x90 | 25 /Pkg. | ||
25x100 | 25 /Pkg. | ||
28x100 | 25 /Pkg. | ||
30x100 | 25 /Pkg. | ||
33x100 | 25 /Pkg. | ||
28x120 | 25 /Pkg. | ||
41x123 | 25 /Pkg. | ||
60x180 | 25 /Pkg. |
Please Specify Particulars Say For
Minipore Micro Glass Fiber Filter Tape is biologically and chemically inert material. It is manufactured from Pure Borosilicate Micro Glass fiber. Matrix is random oriented and bonded with organic binder. It is hydrophobic depth filter media and having high dirt holding capacity. It provides retention to most relevant size of particles 0.3 Micron. Mechanism of retention helps out by its depth in clean air filtration and air evacuation in the vent application.
Specification
Properties | GF T/1 | GF T/2 | |
---|---|---|---|
Basic Weight (g/m2 ) | 75 | 75 | |
Air Resistance | Low | Very low | |
Tensile | (MD) (g/inch) | 1800 | 1500 |
(CD) (g/inch) | 1800 | 1400 | |
pH | Neutral | Neutral | |
Thickness (micron) | 500 | 500 | |
Hydrophobic Head (mm) | >900 | >750 |
Please Specify Particulars Say For
Technical Data
Membrane Type |
Pore Dia (μm) |
Water Flow (Ml/min/cm2) |
Bubble Point (Psi) |
Thickness (μm) |
---|---|---|---|---|
CN | 0.22 | 20 | 55 | 125 |
CN | 0.45 | 60 | 35 | 130 |
CN | 0.65 | 150 | 24 | 145 |
CN | 0.8 | 290 | 16 | 160 |
CN | 1.2 | 300 | 13 | 160 |
CN | 3 | 400 | 9 | 170 |
CN | 5 | 650 | 6 | 170 |
CN | 8 | 800 | 5 | 170 |
Application :
Parenteral solution sterilization, Clarification of hazy solution, Sterility testing. Clarification of serum. Biological investigation of water & waste-water, Cytological examination, Cell harvesting, Colony hybridization, Micro biological analysis.
Ordering Information for Membrane Filter:
Type CN | ||||||
---|---|---|---|---|---|---|
Pore Size (μm) | 0.22, 0.45, 0.65, 0.8, 1.2, 3.0, 5.0, 8.0 | |||||
Diameter (mm) | 13 | 25 | 47 | 90 | 142 | 293 |
Pack Size(pcs) | 100,250 | 100,250 | 100,250 | 100 | 100 | 100 |
Please Specify Particulars Say For
Technical Data
Type | Pore Size | Water Flow (ml/min/ cm ) |
Bubble Point (psi) |
Maximum Operating Temperature |
---|---|---|---|---|
NN/NNZ | 0.22μ | 12 | 52 | 80 oC |
NN/NNZ | 0.45μ | 38 | 35 | 80 oC |
NN/NNZ | 0.8μ | 125 | 14 | 80 oC |
NN/NNZ | 1.2μ | 185 | 12 | 80 oC |
Features:
Application
Ordering Information:
Type | N-66 |
---|---|
Pore Size (μm) | 0.22, 0.45, 0.8, 1.2 |
Diameter (mm) | 293, 142, 90, 47, 25, 13 |
Packaging | 100 Pcs/Box. |
Please Specify Particulars Say For
Specification
Grade | Basic Wt. g/m2 |
Particle Liquid Retention(μm) |
Thickness (μm) |
Water flow Ml/min/cm2 at 10 psi |
Max. Operating Temp.0 C |
Tensile Strength(g) |
---|---|---|---|---|---|---|
GF/2 | 53 | 1.2 | 260 | 40 | 500 | 500 |
Application:
Ordering Information:
Grade | Size(mm) | Packing |
---|---|---|
GF/2 | 25 mm | 100/pkg |
37 mm | 100/pkg | |
47 mm | 100/pkg | |
90 mm | 100/pkg | |
125 mm | 100/pkg | |
203mm x 254mm ( 8”x10”inch) | 100/pkg |
Please Specify Particulars Say For:
Specification:
Grade | Basic Wt. g/m2 |
Particle Liquid Retention(μm) |
Thickness (μm) |
Pressure Drop CmH2O |
Max. Operating Temp.0 C |
Tensile Strength(g) |
---|---|---|---|---|---|---|
GF/1 | 52 | 1.6 | 260 | 3.5 | 500 | 410 |
Application :
Ordering Information :
Grade | Size(mm) | Packing |
---|---|---|
GF/1 | 25 mm | 100/pkg |
37 mm | 100/pkg | |
47 mm | 100/pkg | |
90 mm | 100/pkg | |
203mm x 254mm ( 8”x10”inch) | 100/pkg |
Please Specify Particulars Say For:
It is mainly used in stack monitoring of emission. It is most convenient and ideal for dust collection due to shape, which minimizes the loss of impurities in handling. Micro glass Fiber thimbles are produced from 100% Borosilicate glass fiber. It is binder free structure, no leaching of extractable occurred during critical analysis. High dust holding capacity of thimbles facilitates to achieve large through put. Unlike Cellulose thimble. It can be used at higher temperature (5000C).
Feature:
Specification:
Grade | Weight g/pc |
Nominal Rating (μm) |
Pressure drop (mm) |
%Retention efficiency |
Operating Temp. 0C |
Thickness (μm) |
---|---|---|---|---|---|---|
GFT | 1.6 | 1.0 | 25 | >99.9 | 500 | 450 |
Ordering Information:
Grade | GFT | ID=Internal Diameter EL=External Length |
Size (IDxEL)mm | 19X90, 25X90, 30X100 | |
Pack Size | 25/Pkg |
Please Specify Particulars Say For: