Ghaziabad, Uttar Pradesh, India
GST : 09AAUPS1721Q1ZS
Verified
Add Review
Our Products
Minipore PM2.5 PTFE Membrane is thin uniform Plastic structure to fulfil needs of monitoring particulate matter from ambient, size - 2.0 or less. Membrane is individually numbered in sequence of ascending order. Manufacturing and testing of PM2.5 filter is according to EPA acceptance criteria.
Technical Specification
| Property | Unit of Measurement | Value | Variation |
|---|---|---|---|
| Filter Media | N/A | PTFE | N/A |
| Filter Thickness | μm | 40 | + 10 |
| Filter Diameter | mm | 46.2 | + 0.25 |
| Pore Size | µm | 2 | Maximum |
| Support Ring Width | mm | 3.68 | + 0.51 |
| Support Ring Media | N/A | Polypropylene | N/A |
| Retention Efficiency (DOP) | % | 99.7 | Minimum |
| Pressure Drop | mm ,wc | 30 | Maximum |
| Weight Loss | µg | 20 | Maximum |
Ordering Information:
| Grade | Pore Size (μm) | Diameter (mm) | Pack Size |
|---|---|---|---|
| PTFE | 2.0 µm | 46.2 mm | 50 Pcs. |
Ordering Information
Specification & Ordering Information:
| MOC | Polypropylene |
|---|---|
| Type | PPCF |
| Size | 10”, 20” |
| Pore size | 0.2, 0.45, 1, 5, 10, Micron |
| End Cap | SOE, (Code-7), DOE |
| Maximum Operating Temp. | 80ºC |
| Gasket | Silicon, Neoprene. |
| O-ring | Silicone, Neoprene, Rubber |
Please Specify Particulars Say For:
Minipore manufactures membrane prefilter from pure Borosilicate Glass Fiber. Matrix is bonded with acrylic resin. Surface of filter having hill and valley. It has high dust holding capacity, which enhances life of Membrane, when nominal or coarser filtration is required it may be used as final filter.
Specification Of Membrane Prefilter
| Grade | Composition | Pore Size (μm) |
Flow (ml/min/ cm2 ) |
Thickness (μm) |
|---|---|---|---|---|
| PF1 | Micro Glass Fiber | 1.5 | 1250 | 450 |
| PF2 | Micro Glass Fiber | 2.0 | 1400 | 500 |
| PF3 | Micro Glass Fiber | 3.0 | 1600 | 500 |
Ordering Information:
| Grade | PF1, PF2, PF3 | ||||||
|---|---|---|---|---|---|---|---|
| Pore Size (μm) | 1.5, 2.0, 3.0 | ||||||
| Diameter (mm) | 25 | 47 | 90 | 127 | 142 | 279 | 293 |
| Pack Size (pcs) | 100 | 100 | 100 | 100 | 100 | 100 | 100 |
Please Specify Particulars Say For
Minipore STME membrane (specially treated mixed Easter) is thin structure. Pore geometry is critically fabricated to cater specific and accurate retention of particulate matter. Membrane is individually numbered and advance by one in sequence.
Feature :
Technical Specification
| Property | Unit of Measurement | Value | Variation |
|---|---|---|---|
| Filter Media | N/A | STME | N/A |
| Filter Thickness | μm | 180 | + 10 |
| Filter Diameter | mm | 46.2 | + 0.25 |
| Pore Size | µm | 2 | Maximum |
| Support Ring Width | mm | 3.68 | + 0.51 |
| Support Ring Media | N/A | Polypropylene | N/A |
| Retention Efficiency (DOP) | % | 99.7 | Minimum |
| Pressure Drop | mm ,wc | 25 | Maximum |
| Weight Loss | µg | 20 | Maximum |
Ordering Information:
| Grade | Pore Size (μm) | Diameter (mm) | Pack Size |
|---|---|---|---|
| STME | 2.0 µm | 46.2 mm | 50 Pcs. |
Ordering Information
Edge hydrophobic membrane typically used for colony count, sterility testing of drugs. Solution containing products which affect microbial growth and hydrophobic edge does not permit lateral flow. So that drug would not be able to penetrate under sealing area of filter holder. Residue of drug in the Effective filtration area is removed completely by consistent rinsing and micro organisms grow well During incubation.
Technical Specification
| Grade | Growth per motion test as Per ASTMD-4200-82 |
Thermal Stability | Gamma irradiation |
|---|---|---|---|
| RMCNG | Membranes are tested and validated for no enhancement or inhibition by the Grid lines due to chemicals extractable. | 121 oC | 26.59 K. gray |
| RMCNP | |||
| RMCNPS | |||
| RMCNGS |
Ordering Information
| Grade | Pore Size (μm) |
Diameter (mm) |
Pack Size |
|---|---|---|---|
| RMCNG | 0.2, 0.45 | 25, 47 | 250 |
| RMCNP | |||
| RMCNPS | |||
| RMCNGS |
Graphs Image
Please Specify Particulars Say For:
PTFE membrane filter is resistant to wide range of chemicals. Surface wetting by IPA should require prior to Liquid filtration.
It is mainly used for Air/Gas filtration. Membrane is supported on non woven base to improve handling of filter.
Features :
Specification:
| Pore Size (μm) | 0.22 | 0.45 |
|---|---|---|
| Thickness (μm) | 135 | 135 |
| Bubble Point (psi) | 15 | 7 |
| Air Flow (Lt./min./cm2 ) (at 10 psi) |
2 | 3 |
| Diameter (mm) | 25, 47 | |
Ordering Information:
| Grade | Pore Size (μm) | Diameter (mm) | Pack Size |
|---|---|---|---|
| PTFE | 0.22 | 47 mm | 100 |
| 25 mm | 100 | ||
| 0.45 | 47 mm | 50 | |
| 25 mm | 50 |
Please Specify Particulars Say For:
