Construction :

3 to 5 layer co-extruded composite material made from UV & FR reinforced PP woven fabric with one side special highly reflective metalized film.

Applications :

Our Minaxi™ METW insulation are mainly used under roof decking, under attic rafters, over existing attic insulation, in floors, walls and crawl spaces, and in industrial and commercial buildings to block radiant heat coming into house through the roof during the summer and retain indoor heat generated during the winter. Also used as a moisture vapor barrier in air conditioning ductworks and cold rooms. It is used as packing material for big machine to prevent moisture and radiant heat to contact machine.

Product Benefits :

• Eco friendly, environment friendly and radiant barrier.
• PE woven fabric provides high tensile strength and durability
• Lightweight and easy handling and low cost waterproof type.
• Never use chemical bonding materials.
• PE woven fabric is used; you can sew it and easily install it on big building such a warehouse ceiling, factory building, super market, gm, container liner.
• For heavier basic weight based on order are also available.
• Different lengths and basic weight are available.

Construction :

35 to 7 layer co-extruded composite material made of Fiberglass Reinforced mesh in kraft paper with two side special highly reflective aluminum foil.

Applications :

Our Minaxi™ FSK-BOTH SIDES insulation are mainly used as aluminium foil roof insulation, reflective foil wall insulation and also could be applied as finishes onto rock wool, glass wool etc. Our product is used as a moisture vapor barrier facing in air conditioning ductwork and cold rooms. This flexible thermal insulation sheets also service as energy insulating barrier in aid duct and HVAC system.

Features :

• High reflected rate 97% aluminium foil as outer surface could reflect solar light and block thermal radiant energy; Kraft as liner made it much more stronger than single layer of pure aluminum foil, could be fold- ed into any shape so as to install easily.
• Core ID: 76mm (3inch) Standard

Construction : 5 to 7 layer co-extruded composite material made from UV & FR reinforced PP woven fabric with both side highly reflective Aluminium foil.

Applications :

Our MINAXI® AFWAF aluminum foil PE fabric insulation are mainly used under roof decking, under attic rafters, over existing attic insulation, in floors, walls and crawl spaces, and in industrial and commercial buildings to block radiant heat coming into house through the roof during the summer and retain indoor heat generated during the winter. Also used as a moisture vapor barrier in air conditioning ductworks and cold rooms. It is used as packing material for big machine to prevent moisture and radiant heat to contact machine.

Product Benefits :

• Eco friendly, environment friendly and radiant barrier.
• Aluminum foil woven fabric as a radiant barrier stops up to 97% of radiant heat transfer which improves the performance of the insulating material
• PE woven fabric provides high tensile strength and durabilityf
• Aluminum foil woven fabric provides an efficient, space saving, and healthy method of temperature control and energy savings.
• Lightweight and easy handling and low cost waterproof type.
• Never use chemical bonding materials.
• PE woven fabric is used; you can sew it and easily install it on big building such a warehouse ceiling, factory building, super market, gm, container liner.
• For heavier basic weight based on order are also available.
• Different lengths and basic weight are available.

Constructions : 5 to 7 layer co- extruded composite material made from UV FR reinforced PP nonwoven fabric with both side highly reflective Aluminium foil

Application :

Our MINAXI AFNWAF is consist of Nonwoven fabric which is a fabric-like material made from long fibers, bonded together by chemical, mechanical, heat or solvent treatment as backing, reflective aluminum foil as the outer surface laminated together by LDPE / acrylic adhesive, this foil insulation radiant barrier is lightweight, environment friendly, soft and easy to fold; usually be installed in dry environment to prevent heat conduction and thermal radiant.

Product Benefits :

• Eco-friendly, environment-friendly and radiant barrier.
• PE woven fabric provides high tensile strength and durability
• Lightweight and easy handling and low-cost waterproof type.
• Never use chemical bonding materials.
• PE woven fabric is used; you can sew it and easily install it on big building such a warehouse ceiling, factory building, supermarket, gym, container liner.
• For heavier basic weight based on order are also available.
• Different lengths and basic weight are available.

Construction :

3 to 5 layer co-extruded composite material made from UV & FR reinforced PP woven fabric with one side special highly reflective metalized film.

Applications :

Our Minaxi™ METW insulation are mainly used under roof decking, under attic rafters, over existing attic insulation, in floors, walls and crawl spaces, and in industrial and commercial buildings to block radiant heat coming into house through the roof during the summer and retain indoor heat generated during the winter. Also used as a moisture vapor barrier in air conditioning ductworks and cold rooms. It is used as packing material for big machine to prevent moisture and radiant heat to contact machine.

Product Benefits :

• Eco friendly, environment friendly and radiant barrier.
• PE woven fabric provides high tensile strength and durability
• Lightweight and easy handling and low cost waterproof type.
• Never use chemical bonding materials.
• PE woven fabric is used; you can sew it and easily install it on big building such a warehouse ceiling, factory building, super market, gm, container liner.
• For heavier basic weight based on order are also available.
• Different lengths and basic weight are available.

Construction :

35 to 7 layer co-extruded composite material made of Fiberglass Reinforced mesh in kraft paper with two side special highly reflective aluminum foil.

Applications :

Our Minaxi™ FSK-BOTH SIDES insulation are mainly used as aluminium foil roof insulation, reflective foil wall insulation and also could be applied as finishes onto rock wool, glass wool etc. Our product is used as a moisture vapor barrier facing in air conditioning ductwork and cold rooms. This flexible thermal insulation sheets also service as energy insulating barrier in aid duct and HVAC system.

Features :

• High reflected rate 97% aluminium foil as outer surface could reflect solar light and block thermal radiant energy; Kraft as liner made it much more stronger than single layer of pure aluminum foil, could be fold- ed into any shape so as to install easily.
• Core ID: 76mm (3inch) Standard

Construction : 5 to 7 layer co-extruded composite material made from UV & FR reinforced PP woven fabric with both side highly reflective Aluminium foil.

Applications :

Our MINAXI® AFWAF aluminum foil PE fabric insulation are mainly used under roof decking, under attic rafters, over existing attic insulation, in floors, walls and crawl spaces, and in industrial and commercial buildings to block radiant heat coming into house through the roof during the summer and retain indoor heat generated during the winter. Also used as a moisture vapor barrier in air conditioning ductworks and cold rooms. It is used as packing material for big machine to prevent moisture and radiant heat to contact machine.

Product Benefits :

• Eco friendly, environment friendly and radiant barrier.
• Aluminum foil woven fabric as a radiant barrier stops up to 97% of radiant heat transfer which improves the performance of the insulating material
• PE woven fabric provides high tensile strength and durabilityf
• Aluminum foil woven fabric provides an efficient, space saving, and healthy method of temperature control and energy savings.
• Lightweight and easy handling and low cost waterproof type.
• Never use chemical bonding materials.
• PE woven fabric is used; you can sew it and easily install it on big building such a warehouse ceiling, factory building, super market, gm, container liner.
• For heavier basic weight based on order are also available.
• Different lengths and basic weight are available.

Constructions : 5 to 7 layer co- extruded composite material made from UV FR reinforced PP nonwoven fabric with both side highly reflective Aluminium foil

Application :

Our MINAXI AFNWAF is consist of Nonwoven fabric which is a fabric-like material made from long fibers, bonded together by chemical, mechanical, heat or solvent treatment as backing, reflective aluminum foil as the outer surface laminated together by LDPE / acrylic adhesive, this foil insulation radiant barrier is lightweight, environment friendly, soft and easy to fold; usually be installed in dry environment to prevent heat conduction and thermal radiant.

Product Benefits :

• Eco-friendly, environment-friendly and radiant barrier.
• PE woven fabric provides high tensile strength and durability
• Lightweight and easy handling and low-cost waterproof type.
• Never use chemical bonding materials.
• PE woven fabric is used; you can sew it and easily install it on big building such a warehouse ceiling, factory building, supermarket, gym, container liner.
• For heavier basic weight based on order are also available.
• Different lengths and basic weight are available.