Microteknik

Ambala Cantt, Ambala, Haryana

Laminar Air Flow Cabinets Vertical works on laminar flow principle involves double filtration of air through coarse Pre Filters (upto 5 microns) and Hepa filters (down to 0.3 microns) for filtration of Biological & Particulate contaminants. A constant uni-directional air flows either Horizontally or Vertically, is drawn from atmosphere and passed through pre and Hepa filters on to the work surface. Fabricated out of reinforced pest and weather resistant Duro-board which is clad in from outside in laminated sheet and inner exposed areas are finished in Epoxy paint. Table top stainless steel sheet. Side panels are fixed and made of clear plexiglass. Front door is folding & made of clear plexiglass.

Pre filters:-DOP tested as per Standard BS: 2831 with efficiency 90% down to 5 microns. Made of Washable synthetic material.Hepa Filters:-Made of Microglass fibre with corrugated aluminium foil separators. DOP tested as per US Standard 209B. Efficiency 99.97% down to 0.3 microns.Blower Units:-Assembly of AU or equivalent motor workable on 220V AC 50Hz single phase, dynamically balanced blowers making the unit least vibrant with minimum noise level.Features:-

• Lighting : Fluorescent tube lights
• Sterilization : Germicidal Ultra Violet (UV) tube
• Manometer : Static pressure thick Acrylic block type

Available in following sizes :-Working Chamber: 2 x 2 x 2Working Chamber: 3 x 2 x 2Working Chamber: 4 x 2 x 2Working Chamber: 6 x 2 x 2Working Chamber: 8 x 2 x 2Optional K-System:-The K-System encompasses the specialist requirement of ocyte, sperm and embryo handling during procedures in both animal and human reproduction. The K-system is often built into a Laminar Flow Cabinet. The utensils are warmed by the heating of part of the table plate of the cabinet.The transmitted light source and the regulation transformer for the stereo microscope are located under the stainless steel table plate, with a window for transmitted light built into the table plate.

LAMINAR AIR FLOW CABINETS- HORIZONTAL : JCA-07A

Laminar Air Flow Cabinets works on laminar flow principle involves double filtration of air through coarse Pre Filters (upto 5 microns) and HEPA filters (down to0.3microns) for filtration of Biological & Particulate contaminants. A constant uni-directional air flows either Horizontally or Vertically, is drawn from atmosphere and passed through pre and HEPA filters on to the work surface. Fabricated out of reinforced pest and weather resistant Duro-board which is clad in from outside in laminated sheet and inner exposed areas are finished in Epoxy paint. Table top stainless steel sheet. Side panels are fixed and made of clear plexiglass. Front door is folding & made of clear plexiglass.

Prefilters:-DOP tested as per Standard BS:2831with efficiency90%down to5microns. Made of Washable synthetic material.

HEPA Filters:-Made of Microglass fibre with corrugated aluminium foil separators. DOP tested as per USStandard209B.Efficiency99.97%down to 0.3microns.

Blower Units:-Assembly of AU or equivalent motor workable on220VAC50Hzsingle phase, dynamicallybalanced blowers making the unit least vibrant with minimum noise level.

Features:-

• Lighting: Fluorescent tube lights
• Sterilization: Germicidal Ultra Violet (UV) tube
• Manometer: Static pressure thick Acrylic block type

Available in following sizes :-Working Chamber: 2 x 2 x 2Working Chamber: 3 x 2 x 2Working Chamber: 4 x 2 x 2Working Chamber: 6 x 2 x 2Working Chamber: 8 x 2 x 2

me Hoods are designed to contain and exhaust toxic, obnoxious, pungent smelling gasses to protect personnel and equipment in the laboratories. The fume hood comprise with international standard on fume handling systems. A motor driven dynamically balanced blower with minimal vibration and noise level creates negative pressure and sucks contaminated air from work area and throws the same in high-up atmosphere through ductings.
Fabricated out of thick Duro-board clad from outside in laminated sheet and inside finished in non-corrosive, chemical resistant Epoxy paint. An up & down sliding Sash made of Teakwood mounted in thick glass sheet and workable on weights & pulleys system counter balanced is provided. Fluorescent lighting is provided in the chamber. A gas tap and electric power plug also provided in addition to stainless steel wash basin and suitable water tap.
A work-bench with cupboard is provided to hold the hood at suitable level from ground :

• Chamber : 3x2x2'
• Chamber : 4x2x2'
• Chamber : 6x2x2'
• Chamber : 8x3x3'

V.D.R.L. Rotator Shaker : JEQ-5E
Used for V.D.R.L. and other agglutination tests, blood grouping tests and for mixing of solutions in small flasks, beakers or bottles. Large platform 300300 mm can take cavity slides, blood bottles, flasks by use of spring holders. It runs at fixed speed of 180 RPM. 60 minutes automatic timer has been provided to control shaking duration.Complete with cord-plug to work on 220 V AC 50 Hz single phase.

Model No : JEQ-6D

The Refrigerated Centrifuge is a compact andpowerful high-speed centrifuge used in physical and chemistry analysis, biochemistry, cellular and molecular biology, clinical Labs and blood donation centers, and is ideal for high-end research applications.Brush less motor drive, maintenance free. High quality aluminum alloy bio-containment rotors, safe and auto cleavable. Special double cooling air design, minimizes rotor heating. Pulse operation for quick spins. Automatic door lock. Timer 0-15min.Works on 220volt A.C.single phase.

COOLING: Powerful compressor and cooling system, fast cooling. -8C temperature range.

LCD DISPLAY: Temperature controller, timer, Run time.

MODEL NO: JEQ-6D

• Maximum speed 2000 to 16000rpm.
• Rotors include a 121.5/2ml eppendorf tubes.
• Rotors include a 8 x 15ml.
• Rotors include a 4 x 50ml. ANY ONE

MODEL NO: JEQ-6DT

LCD DISPLAY: Temperature controller, timer, Run time, Speed indicator, RCF Indicator.

DETECTOR: Imbalance detector.Maximum speed 20000 rpm.

Rotors:

• 12 x 0.5ml
• 12 x 1.5/2ml
• 10 x 15ml
• 6 x 50ml
• 4 x 50ml
• 4 x 100ml ANY ONE

Model No: JEQ-31

Specification :

• Fitted with well balanced universal motor.
• Digital LCD display shows set time/run time/RPM
• Preset speed controller through microproccessor from 2000 to
• 13000 RPM
• Including following accessories.
• Rotor to accommodate 24 cappilaries of 75 mm
• Heparinised Cappilary tube 100nos
• NON Heparinised Cappilary tube 100nos

Model No: JEQ-4E

EGG INCUBATOR : JEQ-4EMicroprocessor Based, PID Digital Temperature Indicator-cum-controller. Double walled with outer chamber made of M.S. Sheet epoxy powder coated and Inner chamber made up of SS 304 grade steel. A High grade glass wool insulation.

• Temperature range: ambient to 40C Accuracy of 5C
• Humidity Controller. Manual tilting device, Incubator door with glass window.
• Air ventilation, air circulation.
• Power: 220 volts A.C., 50 Hz.
• Door gasket: Neoprene rubber.

Capacity:

• 50 eggs.
• 100 eggs.
• 200 eggs.
• 250 eggs.

Doctor Centrifuge: JEQ-6
Item code: JEQ-6

Having a defined quality management system, we are regarded as the noteworthy manufacturer and supplier of an extensive gamut of Doctor Centrifuges. The product offered by us designed using excellent quality raw material and advanced technology as per set industry norms. This product is meticulously tested on various quality parameters and is widely demanded in chemistry labs. In line with international standard, we provide this product in various customized options and at reasonable price.

Specifications:

Capacity(ml) :

• 4 x 15
• 6 x 15
• 8 x 15

HEAMATOCRITE CENTRIFUGES JEQ-31

Specification of Heamatocrite Centrifuge :

• Fitted with well balanced universal motor.
• Digital LCD display shows set time/run time/RPM.
• Preset speed controller through microproccessor from 2000 to 13000 RPM.
• Including following accessories.
• Rotor to accommodate 24 cappilaries of 75 mm.
• Heparinised Cappilary tube 100 nos.
• NON Heparinised Cappilary tube 100 nos.

DISSOLUTION RATE TEST EQUIPMENT : P-D3

Dissolution Rate Test Equipment : This equipment is used to determine dissolution rate of tablets and complies with US-Pharmacopoeia-XVII standard with water constantly moving and holding temp. constant at 37C 0. 5C throughout the test. A 1000 ml capacity cylindrical vessel with flanges near the top is provided to accept 4 parts cover. Motor speed is controlled by a speed controller within a range of 25 to 150 RPM.A stainless steel basket is provided to hold samples. The machine works on 220V AC 50Hz single phase.

A. Single testB. Double testC. Combined unit for 3 tests.

Actophotometer (Activity cage):It consist of six built in photo senser and 4 digit digital counter to indicate the locomotor activity. It measures the spontaneous and indicated activity with digital totalizer. It also incorporates electric shock of upto 100 volts for activating rats. The stimulus is variable from 0 to 100V & indicating on meter.

COD Digesteris the most accepted Thermoreactor for Determination of Chemical Oxygen Demand in Various Substances. Chemical Oxygen Demand (COD) is a Measure of the Capacity of Water to Consume Oxygen During the Decomposition of Organic Matter and the Oxidation of Inorganic Chemicals such as Ammonia and Nitrite. COD Measurements are Commonly made on Samples of Waste Waters or of Natural Waters Contaminated by Domestic or Industrial Wastes. Chemical Oxygen Demand is Measured as a Standardized Laboratory assay in which a closed Water Sample is Incubated with a Strong Chemical Oxidant Under Specific Conditions of Temperature and for a Particular Period of Time.High Performance and User Friendly Controls Combine to Produce a Specification Which Offers Exceptional Efficiency and Reliability. The Benefit to you-convenient, No Fuss Heating! Excellent Temperature Control. Uniform And Stable Heating New Compact Size

Technical Specification:

Sliding Microtome is a jung type sturdy sectioning equipment for paraffin, cellodine & embedded specimen or in natural form. It is suitable to cut sections upto 40 microns in steps of 2 microns each.

Technical Features:-

• Length of sliding track : 27 cms
• Total feed excursion : 25 mm
• Object stage opening : 31X26 mm

Accessories supplied with Equipment:-

1. Razor-120 mm-on
2. Object holders-set of three
3. Oilcan-one
4. Packed in card board box

Wood Microtome (Jung Type) is a heavy duty microtome for sectioning hard materials like wood, bone etc. upto 8 x 5 cm size in steps of 1 micron each upto 30 microns.
Technical features:-

• Feed adjustment - 30 microns
• Vertical object displacement - 30mm
• Opening of object vice - 80x50 mm
• Length of slide ways - 42 cm
• Overall dimensions (horizontal) 85x40 cm

Accessories supplied with equipment:-

• Special heavy duty razor with back-one
• Object holders-set of three
• Vices-two
• Spanner for tightening razor-one
• l-keys-two
• Screw driver-one
• Oilcan-one

Blood Roller Mixer:

• The product is used for mixing and blending of the blood, powder reagents, total blood control materials in the anticoagulation tube or bottle.It is proved of being more accurate and effective than the manual mixing by the Delhi Clinical Inspection Center as well as the Big Hospital all over that India.According to different requirements, it can be rolling mixing, anticlockwise rolling and speed adjustable. It is an ideal instrument for clinical lab.
• Technical parameter:

The ERMA type is a simple but versatile Rotary Microtome for cutting of uniform sections upto 25 microns in steps of 1 micron each. The internal structure is completely encased in a metallic cover. The selected alloys are used in fabrication of the machine and razor.
Accessories supplied with equipment:-

• Razor-120 mm with back & handle-one
• Object holders-set of three
• Honing plate-one
• Oilcan-one
• Packed in card board box and thermocol packing

Item code : JEQ-6E
Specification:

• Microprocessor based.
• Fitted with brushless automatic balanced motor.
• Digital timer of range 0-99 minutes.
• Digital speed indicator.
• Digital RCF indicator.
• Programmable speed regulator.
• Electronic safe lid lock.
• Imbalance detector.
• RPM 5000.
• Rotor.

4 x 100ml, 4 x 50ml, 8 x 50ml32 x 10ml, 32 x 7ml, 48 x 5 ml4 x 250ml, Any One From Above

Model JEQ-6E1Same As Above.RPM 16000 With rotor for 12 X 1.5/2ML.

Item code: JEQ-5
Shaking Machine Wrist Action has a heavy cast iron base with sturdy construction with two side arms for holding flasks. A fractional H.P. Heavy duty motor with variable speed through continuously variable speed controller is provided. To hold flasks of capacity 100 to 1000 ml. Complete with cord plug etc. To work on 220V AC 50Hz single phase. Automatic 0-60 minutes timer.

Available in :

• Model to hold 6 flasks
• Model to hold 8 flasks
• Model to hold 16 flasks

Shaking Machine Wrist Action & Platform Shaker : It is Same as JEQ-5A but provided a plateform at the top of thebody to hold the flask through clamps for 9/16 flasks more.

Item code: JAQ-6A
Dome type, sturdy, stable, heavy body with silentlymounted motor for vibration-free performance with builtin 5-speed regulator and one non-removeable swing out rotor.Complete with tube carriers. Maximum speed 3500 RPM. Neatlyfinished in stoving enamel paint.Medical/Clinical (i) (ii) (iii)Capacity (ml.) 4 x 15 6 x 15 8 x 15Max. RCF 'g' 1850 1600 1600DoctorMax. RCF 'g' 1250 1250 1250

Item code: JRS-B35

Double walled construction with inner S.S. argon welded one piece pot which avoids leakages. 2 Thick Insulation ensures stable temperature with reduced energy consumption.CFC Free hermitically sealed compressor for better cooling with time delay to safe guard compressor. Circulation pump is provided for better uniformity of Temperature instead of stirrer. Side mounted circulating pump 15 ltr. /min capacity, single phase, 230 Volts. Top mounted removable lid. S.S. Tubular heater (water immersion type) is used at bottom for better heat distribution.Temperature : -20C
Temperature Control :

• Microprocessor based auto tuned PID controller dual display of set value & process value.

Safety Features :

• Safety audio visual alarms for temperature overshoot & undershoot.
• Compressor ON delay timer (2 min.) to safe guard the compressor.

Optional :

• Digital temp. indicator-cum-controller with computer data logger.

Plant Growth Chamber is a useful to conduct experiments on plant growth in certain controlled environmental conditions. Double walled construction, inner made of anodized aluminum or stainless steel sheet and outer made of mild steel sheet duly finished in powder coated.

In addition to a double walled outer door. A full-view clear acrylic door has been provided for inspection of material without disturbing chamber conditions. Three perforated adjustable shelves are provided. Temperature range from 5C to 50C 2C is controlled by a Digital Temperature Controller and Indicator. Heating is achieved by insulated elements and cooling by a sealed compressor unit. Inner cyclic illumination is controlled by a 0-24 hrs. Timer and light intensity by a controller.

Humidity created in a stainless steel chamber heated by an immersion heater below the chamber, from ambient to 95% 3% RH and is controlled by a humidistat.

Item code: JEQ-20
Vortex mixer : Adjustable speed, Vortex genie short, rapid, eccentric stroke motor ribin neoprene cup imparts vigorous agitation to tubes. With speed control indicator and on-off switch.

Our company is enrolled in manufacturing and supplying extensive variety ofObject Drawing Modelto our valuable clients. Manufactured using high quality raw material, these equipments are known for their durability and reliability. The list of products includes:Rectangular Pyramid, Pentagonal Prism, Octagonal Pyramid, Cube Cut in Two Right Angles, Triangular Prism Cut in Two Parts Parallel to Base, Geometrical Model Kit Set of 16 Wooden Models in Wooden Box.

Compact rectangular body made of mild steel duly powder coated, with clear acrylic lockable lid, continuously variable speed regulator, safety fuse, pilot lamp etc. provided on streamlined panel. With plug-cord to work on 220 V AC 50 Hz single phase. Maximum speed 4000 RPM. A special safety mode is provided that when lid is open instrument will stop working. Capacity (ml.) 4 x 50 6 x 50 8 x 15 12 x 15 16 x 15 Optionals : 1. Automatic 0-60 minutes Timer. 2. Speedometer Digital. 3. Maximum speed 10000 can also be provided.

Microteknik offers an extensive range ofStandard I.S. Testing Sievesfor all types of sieve testing applications, from sampling and classification of soils, aggregates and other powdered and granular materials to specific ASTM standard tests. We provide highest quality of testing sieves which ensure consistent fit, accurate specifications and durable construction. Products include:Standard test sieves, Coarse series G.I test sieves as per I.S. standards , Test Sieves.

We offer a reliable and cost effective range of Vacuum Centrifuge, which is known for its smooth performance and efficiency. Designed under the supervision of engineers, these are well tested on quality basis to give a final touch. Equipped with Vacuum pump, motor and equipments, these are used to discharge controllable fumes mixed with running water. However, these Vacuum Centrifuge are also provided with Ammeter, Voltmeter, RPM meter, vacuum pressure controler, vacuum gauge for superior performance.

Incubator (Memmert type) JEQ-4 (A) : Standard double walled construction. Inner chamber made of aluminum or stainless steel sheet and outer made of mild steel sheet finished in powder Coated color combination. Gap filled with glass wool for temp. insulation. Double walled door with double glass window for observation in the chamber. Temperature range 5^oC above ambient to 80^oC - 10^oC controlled by a thermostat. L-shaped thermometer provided along with pilot lamps, on-off switch Temp

Parameters

WBC Lymph# Mid# Gran# Lymph% Mid% Gran% RBC HGB HCT MCV MCH MCHC RDW-CV RDW-SD PLT MPV PDW PCT and Histogram for WBC, RBC, PLT

Principle

Electrical resistance for counting and SFT method for HGB.

Performance

Display

Large Color LCD, displays all parameters result with histogram of WBC, RBC and PLT Resolution 640480.

Menu

Count, Sample Models, Review, Quality Control, System setting, Reference value, System Service, Calibration copyright, Shutdown.

Alert

25 sets of alert message.

Input/Output

USB(keyboard, mouse, flash disk), RS 232, parallel.

Print

Power Requirement

AC110-240V, 60/50 Hz. 2AGraphic thermal printer with various printing format optional external printer.

Sample Volume

Specification :

• Fitted with well balanced universal motor.
• Digital LCD display shows set time/run time/RPM
• Preset speed controller through microproccessor from 2000 to 13000 RPM
• Including following accessories.
• Rotor to accommodate 24 cappilaries of 75 mm
• Heparinised Cappilary tube 100nos
• NON Heparinised Cappilary tube 100nos

Used for V.D.R.L. and other agglutination tests, blood grouping tests and for mixing of solutions in small flasks, beakers or bottles. Large platform 300300 mm can take cavity slides, blood bottles, flasks by use of spring holders. It runs at fixed speed of 180 RPM. 60 minutes automatic timer has been provided to control shaking duration.Complete with cord-plug to work on 220 V AC 50 Hz single phase.

Laminar Air Flow Cabinetsworks on laminar flow principle involves double filtration of air through coarse Pre Filters (upto 5 microns) and HEPA filters (down to0.3microns) for filtration of Biological & Particulate contaminants. A constant uni-directional air flows either Horizontally or Vertically, is drawn from atmosphere and passed through pre and HEPA filters on to the work surface. Fabricated out of reinforced pest and weather resistant Duro-board which is clad in from outside in laminated sheet and inner exposed areas are finished in Epoxy paint. Table top stainless steel sheet. Side panels are fixed and made of clear plexiglass. Front door is folding & made of clear plexiglass.

Prefilters:-DOP tested as per Standard BS:2831with efficiency90%down to5microns. Made of Washable synthetic material.

HEPA Filters:-Made of Microglass fibre with corrugated aluminium foil separators. DOP tested as per USStandard209B.Efficiency99.97%down to 0.3microns.

Blower Units:-Assembly of AU or equivalent motor workable on220VAC50Hzsingle phase, dynamicallybalanced blowers making the unit least vibrant with minimum noise level.

Features:-

• Lighting: Fluorescent tube lights
• Sterilization: Germicidal Ultra Violet (UV) tube
• Manometer: Static pressure thick Acrylic block type

Available in following sizes :-Working Chamber: 2 x 2 x 2Working Chamber: 3 x 2 x 2Working Chamber: 4 x 2 x 2Working Chamber: 6 x 2 x 2Working Chamber: 8 x 2 x 2

Soxhlet And Digestion UnitsAnd Soxhlet Extraction Units (without glass parts) : Standard mild steel housing with heating mantles or hot plates for surface temperature upto 300C. Provided with two horizontal and two vertical rods complete with sockets and screws to hold flasks, individual pilot lamps and energy regulators etc.

Models:
JEQ-15 :3 tests mantle type
JEQ-15A :6 tests mantle type
JEQ-15B :3 tests hot plate type
JEQ-15C :6 tests hot plate type

It consist of six built in photo senser and 4 digit digital counter to indicate the locomotor activity. It measures the spontaneous and indicated activity with digital totalizer. It also incorporates electric shock of upto 100 volts for activating rats. The stimulus is variable from 0 to 100V & indicating on meter.