Microtech Engineering

Krishna Vihar, delhi

tomato ketchup transfer pump

microtechengineering

lobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, pharmaceutical, and biotechnology. They are popular in these diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (cip/sip) characteristics.these pumps offer a variety of lobe options including single, biwing, tri-lobe (shown), and multi-lobe.rotary lobe pumps are non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self- priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.

microtechengineering

lobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, pharmaceutical, and biotechnology. They are popular in these diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (cip/sip) characteristics.these pumps offer a variety of lobe options including single, biwing, tri-lobe (shown), and multi-lobe.rotary lobe pumps are non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self- priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.

how lobe pumps work liquid flows into the cavity and is trapped by the lobes as they rotate.

lobe pumps are similar to external gear pumps in operation in that fluid flows around the interior of the casing. Unlike external gear pumps, however, the lobes do not make contact. Lobe contact is prevented by external timinggears located in the gearbox. Pump shaft support bearings are located in the gearbox, and since the bearings are out

of the pumped liquid, pressure is limited by bearing location and shaft deflection.

application

alcohol - apple pure apricots - baby food batter beans beer beetroot - biscuit cream blackcurrants brine broth -butter fat caramel - castor oil - cat food - cheese curd - cheese whey cherries - chicken paste - chili con carne chocolate chutney cockles - coconut oil - cod oil coffee liquor cordials -corn oil- corn syrup cottage cheese - cotton seed oil cranberry --- juice - cream creamcheese custard - dog food dough eggs whole - egg yolk essences evaporated milk -fish- iodine - ointment etc

ss lobe pump manufacturer in indiamicrotechengineering lobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, pharmaceutical, and biotechnology. They are popular in these diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (cip/sip) characteristics.these pumps offer a variety of lobe options including single, biwing, tri-lobe (shown), and multi-lobe.rotary lobe pumps are non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self- priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.

application

alcohol - apple pure apricots - baby food batter beans beer beetroot - biscuit cream blackcurrants brine broth -butter fat caramel - castor oil - cat food - cheese curd - cheese whey cherries - chicken paste - chili con carne chocolate chutney cockles - coconut oil - cod oil coffee liquor cordials -corn oil

- corn syrup cottage cheese - cotton seed oil cranberry --

- juice - cream creamcheese custard - dog food dough eggs whole - egg yolk essences evaporated milk -fish - iodine - ointment etc

lobe pump for transferring cream

we are involved in manufacturinglobe pump for transferring creamin order to cater to the requirements of the clients. These pumps are used in pharmaceutical, food and beverage, cosmetics, dairy and chemical industries. The functions of the pump is the transfer of liquids and products like pastes, creams and gels. Features of the product are as follows:

quick and easy dismantlingeasy to cleanlong life

microtech engineringlobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, pharmaceutical, and biotechnology. They are popular in these diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (cip/sip) characteristics.these pumps offer a variety of lobe options including single, biwing, tri-lobe (shown), and multi-lobe.rotary lobe pumps are non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self- priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.

how lobe pumps work liquid flows into the cavity and is trapped by the lobes as they rotate.

lobe pumps are similar to external gear pumps in operation in that fluid flows around the interior of the casing. Unlike external gear pumps, however, the lobes do not make contact. Lobe contact is prevented by external timinggears located in the gearbox. Pump shaft support bearings are located in the gearbox, and since the bearings are out

of the pumped liquid, pressure is limited by bearing location and shaft deflection.

applicationalcohol - apple pure apricots - baby food batter beans beer beetroot - biscuit cream blackcurrants brine broth -butter fat caramel - castor oil - cat food - cheese curd - cheese whey cherries - chicken paste - chili con carne chocolate chutney cockles - coconut oil - cod oil coffee liquor cordials -corn oil

- corn syrup cottage cheese - cotton seed oil cranberry --- juice - cream creamcheese custard - dog food dough eggs whole - egg yolk essences evaporated milk -fish - iodine - ointment etc

microtechengineering

lobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, pharmaceutical, and biotechnology. They are popular in these diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (cip/sip) characteristics.these pumps offer a variety of lobe options including single, biwing, tri-lobe (shown), and multi-lobe.rotary lobe pumps are non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self- priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.

how lobe pumps workliquid flows into the cavity and is trapped by the lobes as they rotate.

lobe pumps are similar to external gear pumps in operation in that fluid flows around the interior of the casing. Unlike external gear pumps, however, the lobes do not make contact. Lobe contact is prevented by external timinggears located in the gearbox. Pump shaft support bearings are located in the gearbox, and since the bearings are out

of the pumped liquid, pressure is limited by bearing location and shaft deflection.

applicationalcohol - apple pure apricots - baby food batter beans beer beetroot - biscuit cream blackcurrants brine broth -butter fat caramel - castor oil - cat food - cheese curd - cheese whey cherries -chicken paste - chili con carne chocolate chutney cockles - coconut oil - cod oil coffee liquor cordials -corn oil- corn syrup cottage cheese - cotton seed oil cranberry -- juice - cream creamcheese custard - dog food dough eggs whole - egg yolk essences evaporated milk -fish flavorings - fondants-fruit juice - fruit pulp - fruit whole fruit -yogurt- gelatin gherkins glucose glycerin gooseberries gravy -- - hand cream honey horseradish - ice cream icings - iodine - ointment etc

horizontal lobe pump

microtechengineering

lobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, pharmaceutical, and biotechnology. They are popular in these diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (cip/sip) characteristics.these pumps offer a variety of lobe options including single, biwing, tri-lobe (shown), and multi-lobe.rotary lobe pumps are non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self- priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.

application

alcohol - apple pure apricots - baby food batter beans beer beetroot - biscuit cream blackcurrants brine broth -butter fat caramel - castor oil - cat food - cheese curd - cheese whey cherries - chicken paste - chili con carne chocolate chutney cockles - coconut oil - cod oil coffee liquor cordials -corn oil- corn syrup cottage cheese - cotton seed oil cranberry --

- juice - cream creamcheese custard - dog food dough eggs whole - egg yolk essences evaporated milk -fish flavorings - fondants-fruit juice - fruit pulp - fruit whole fruit -yogurt- gelatin gherkins glucose glycerin gooseberries gravy -- - hand cream honey horseradish - ice cream icings - iodine - ointment etc

microtechengineering lobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, pharmaceutical, and biotechnology. They are popular in these diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (cip/sip) characteristics.these pumps offer a variety of lobe options including single, biwing, tri-lobe (shown), and multi-lobe.rotary lobe pumps are non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self- priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.

how lobe pumps work liquid flows into the cavity and is trapped by the lobes as they rotate.

lobe pumps are similar to external gear pumps in operation in that fluid flows around the interior of the casing. Unlike external gear pumps, however, the lobes do not make contact. Lobe contact is prevented by external timinggears located in the gearbox. Pump shaft support bearings are located in the gearbox, and since the bearings are out

of the pumped liquid, pressure is limited by bearing location and shaft deflection.

microtechengineering lobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, pharmaceutical, and biotechnology. They are popular in these diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (cip/sip) characteristics.these pumps offer a variety of lobe options including single, biwing, tri-lobe (shown), and multi-lobe.rotary lobe pumps are non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self- priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.

how lobe pumps work liquid flows into the cavity and is trapped by the lobes as they rotate.

lobe pumps are similar to external gear pumps in operation in that fluid flows around the interior of the casing. Unlike external gear pumps, however, the lobes do not make contact. Lobe contact is prevented by external timinggears located in the gearbox. Pump shaft support bearings are located in the gearbox, and since the bearings are out

of the pumped liquid, pressure is limited by bearing location and shaft deflection.

High Viscosity paste transfer pump

Lobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, Pharmaceutical, and biotechnology. They are popular in these Diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (CIP/SIP) characteristics.These pumps offer a variety of lobe options including single, biwing, tri-lobe (shown), and multi-lobe.Rotary lobe pumps are Non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self- priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.rotary lobe pump

cosmetic cream transfer pump

microtechengineering
lobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, pharmaceutical, and biotechnology. They are popular in these diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (cip/sip) characteristics.these pumps offer a variety of lobe options including single, biwing, tri-lobe (shown), and multi-lobe.rotary lobe pumps are non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self- priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.

horizontal rotary lobe pump

horizontal rotary lobe pump

lobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, pharmaceutical, and biotechnology. They are popular in these diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (cip/sip) characteristics.these pumps offer a variety of lobe options including single, biwing, tri-lobe (shown), and multi-lobe.rotary lobe pumps are non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self- priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.

application

alcohol - apple pure apricots - baby food batter beans beer beetroot - biscuit cream blackcurrants brine broth -butter fat caramel - castor oil - cat food - cheese curd - cheese whey cherries - chicken paste - chili con carne chocolate chutney cockles - coconut oil - cod oil coffee liquor cordials -corn oil- corn syrup cottage cheese - cotton seed oil cranberry --

- juice - cream creamcheese custard - dog food dough eggs whole - egg yolk essences evaporated milk -fish flavorings - fondants-fruit juice - fruit pulp - fruit whole fruit -yogurt- gelatin gherkins glucose glycerin gooseberries gravy -- - hand cream honey horseradish - ice cream icings - iodine - ointment etc .

microtechengineering lobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, pharmaceutical, and biotechnology. They are popular in these diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (cip/sip) characteristics.these pumps offer a variety of lobe options including single, biwing, tri-lobe (shown), and multi-lobe.rotary lobe pumps are non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self- priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.

how lobe pumps work liquid flows into the cavity and is trapped by the lobes as they rotate.

lobe pumps are similar to external gear pumps in operation in that fluid flows around the interior of the casing. Unlike external gear pumps, however, the lobes do not make contact. Lobe contact is prevented by external timinggears located in the gearbox. Pump shaft support bearings are located in the gearbox, and since the bearings are out

advantages

pass medium solids

no metal-to-metal contact

superior cip/sip capabilities

long term dry run (with lubrication to seals)

non-pulsating discharge

disadvantages

requires timing gears

requires two seals

reduced lift with thin

tooth paste transfer pump microtech engineering

lobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, pharmaceutical, and biotechnology. They are popular in these diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (cip/sip) characteristics.these pumps offer a variety of lobe options including single, biwing, tri-lobe (shown), and multi-lobe.rotary lobe pumps are non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self- priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.

application -corn syrup cottage cheese - cotton seed oil cranberry - juice - cream cream cheese custard - dog food dough eggs whole - egg yolk essences evaporated milk -fish - iodine - ointment etc alcohol - apple pure apricots - baby food batter beans beer beetroot - biscuit cream blackcurrants brine broth -butter fat caramel - castor oil - cat food - cheese curd - cheese whey cherries - chicken paste - chili con carne chocolate chutney cockles - coconut oil - cod oil coffee liquor cordials -corn oil-ect

thick liquid transfer pump

lobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, pharmaceutical, and biotechnology. They are popular in these diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (cip/sip) characteristics.these pumps offer a variety of lobe options including single, biwing, tri-lobe (shown), and multi-lobe.rotary lobe pumps are non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self- priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.applicationalcohol - apple pure apricots - baby food batter beans beer beetroot - biscuit cream blackcurrants brine broth -butter fat caramel - castor oil - cat food - cheese curd - cheese whey cherries - chicken paste - chili con carne chocolate chutney cockles - coconut oil - cod oil coffee liquor cordials -corn oil- corn syrup cottage cheese - cotton seed oil cranberry --- juice - cream creamcheese custard - dog food dough eggs whole - egg yolk essences evaporated milk -fish flavorings - fondants-fruit juice - fruit pulp - fruit whole fruit -yogurt- gelatin gherkins glucose glycerin gooseberries gravy -- - hand cream honey horseradish - ice cream icings - iodine - ointment etc

• item code: methltp

wing lobe pumpswing lobe pumps

lobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, pharmaceutical, and biotechnology. They are popular in these diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (cip/sip) characteristics.these pumps offer a variety of lobe options including single, biwing, tri-lobe (shown), and multi-lobe.rotary lobe pumps are non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self- priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.

application

alcohol - apple pure apricots - baby food batter beans beer beetroot - biscuit cream blackcurrants brine broth -butter fat caramel - castor oil - cat food - cheese curd - cheese whey cherries - chicken paste - chili con carne chocolate chutney cockles - coconut oil - cod oil coffee liquor cordials -corn oil- corn syrup cottage cheese - cotton seed oil cranberry --

- juice - cream creamcheese custard - dog food dough eggs whole - egg yolk essences evaporated milk -fish flavorings - fondants-fruit juice - fruit pulp - fruit whole fruit -yogurt- gelatin gherkins glucose glycerin gooseberries gravy -- - hand cream honey horseradish - ice cream icings - iodine - ointment etc

• item code: mewlp

Wing Lobe PumpsWing Lobe Pumps

Lobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, Pharmaceutical, and biotechnology. They are popular in these Diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (CIP/SIP) characteristics.These pumps offer a variety of lobe options including single, biwing, tri-lobe (shown), and multi-lobe.Rotary lobe pumps are Non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self- priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.

Application

Alcohol - Apple pure Apricots - Baby food Batter Beans Beer Beetroot - Biscuit Cream Blackcurrants Brine Broth -Butter fat Caramel - Castor Oil - Cat food - Cheese curd - Cheese whey Cherries - Chicken paste - Chili con Carne Chocolate Chutney Cockles - Coconut oil - Cod oil Coffee liquor Cordials -Corn oil- Corn syrup Cottage cheese - Cotton seed oil Cranberry --

- juice - Cream Creamcheese Custard - Dog food Dough Eggs whole - Egg yolk Essences Evaporated milk -Fish Flavorings - Fondants-Fruit juice - Fruit pulp - Fruit whole Fruit -yogurt- Gelatin Gherkins Glucose Glycerin Gooseberries Gravy -- - Hand cream Honey Horseradish - Ice cream Icings - Iodine - ointment etc

Microtechengineering Lobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, Pharmaceutical, and biotechnology. They are popular in these Diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (CIP/SIP) characteristics.These pumps offer a variety of lobe options including single, biwing, tri-lobe (shown), and multi-lobe.Rotary lobe pumps are Non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self- priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.

microtechengineering lobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, pharmaceutical, and biotechnology. They are popular in these diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (cip/sip) characteristics.these pumps offer a variety of lobe options including single, biwing, tri-lobe (shown), and multi-lobe.rotary lobe pumps are non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self- priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.

how lobe pumps work liquid flows into the cavity and is trapped by the lobes as they rotate.lobe pumps are similar to external gear pumps in operation in that fluid flows around the interior of the casing. Unlike external gear pumps, however, the lobes do not make contact. Lobe contact is prevented by external timing gears located in the gearbox. Pump shaft support bearings are located in the gearbox, and since the bearings are out of the pumped liquid, pressure is limited by bearing location and shaft deflection.

application

alcohol - apple pure apricots - baby food batter beans beer beetroot - biscuit cream blackcurrants brine broth -butter fat caramel - castor oil - cat food - cheese curd - cheese whey cherries - chicken paste - chili con carne chocolate chutney cockles - coconut oil - cod oil coffee liquor cordials -corn oil- corn syrup cottage cheese - cotton seed oil cranberry --

- juice - cream creamcheese custard - dog food dough eggs whole - egg yolk essences evaporated milk -fish flavorings - fondants-fruit juice - fruit pulp - fruit whole fruit -yogurt- gelatin gherkins glucose glycerin gooseberries gravy -- - hand cream honey horseradish - ice cream icings - iodine - ointment etc

• item code: meblp

yogurt transfer pump

microtech engineeringlobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, pharmaceutical, and biotechnology. They are popular in these diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (cip/sip) characteristics.these pumps offer a variety of lobe options including single, biwing, tri-lobe (shown), and multi-lobe.rotary lobe pumps are non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self- priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.

application- corn syrup cottage cheese - cotton seed oil cranberry --- juice - cream cream cheese custard - dog food dough eggs whole - egg yolk essences evaporated milk -fish - iodine - ointment etc alcohol - apple pure apricots - baby food batter beans beer beetroot - biscuit cream blackcurrants brine broth -butter fat caramel - castor oil - cat food - cheese curd - cheese whey cherries - chicken paste - chili con carne chocolate chutney cockles - coconut oil - cod oil coffee liquor cordials -corn oil

microtech engineering

lobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, pharmaceutical, and biotechnology. they are popular in these diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (cip/sip) characteristics.these pumps offer a variety of lobe options including single, biwing, tri-lobe (shown), and multi-lobe.rotary lobe pumps are non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. they are also used to handle slurries, pastes, and a wide variety of other liquids. if wetted, they offer self- priming performance. a gentle pumping action minimizes product degradation. they also offer reversible flows and can operate dry for long periods of time. flow is relatively independent of changes in process pressure, so output is constant and continuous.

steam jacketed rotary lobe pumpsteam jacketed rotary lobe pump

lobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, pharmaceutical, and biotechnology. They are popular in these diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (cip/sip) characteristics.these pumps offer a variety of lobe options including single, biwing, tri-lobe (shown), and multi-lobe.rotary lobe pumps are non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self- priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.

pplicationalcohol - apple pure apricots - baby food batter beans beer beetroot - biscuit cream blackcurrants brine broth -butter fat caramel - castor oil - cat food - cheese curd - cheese whey cherries - chicken paste - chili con carne chocolate chutney cockles - coconut oil - cod oil coffee liquor cordials -corn oil

- corn syrup cottage cheese - cotton seed oil cranberry --- juice - cream creamcheese custard - dog food dough eggs whole - egg yolk essences evaporated milk -fish - iodine - ointment etc

lobe pump

• item code: mesjlp

steam jacketed lobe pumpsteam jacketed lobe pump
microtechengineering lobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, pharmaceutical, and biotechnology. They are popular in these diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (cip/sip) characteristics.these pumps offer a variety of lobe options including single, biwing, tri-lobe (shown), and multi-lobe.rotary lobe pumps are non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self- priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.applicationalcohol - apple pure apricots - baby food batter beans beer beetroot - biscuit cream blackcurrants brine broth -butter fat caramel - castor oil - cat food - cheese curd - cheese whey cherries - chicken paste - chili con carne chocolate chutney cockles - coconut oil - cod oil coffee liquor cordials -corn oil- corn syrup cottage cheese - cotton seed oil cranberry --- juice - cream creamcheese custard - dog food dough eggs whole - egg yolk essences evaporated milk -fish flavorings - fondants-fruit juice - fruit pulp - fruit whole fruit -yogurt- gelatin gherkins glucose glycerin gooseberries gravy -- - hand cream honey horseradish - ice cream icings - iodine - ointment etc

• item code: mesl

BUMP LOBE PUMP

Application- Corn syrup Cottage cheese - Cotton seed oil Cranberry --- juice - Cream Cream cheese Custard - Dog food Dough Eggs whole - Egg yolk Essences Evaporated milk -Fish - Iodine - ointment etc Alcohol - Apple pure Apricots - Baby food Batter Beans Beer Beetroot - Biscuit Cream Blackcurrants Brine Broth -Butter fat Caramel - Castor Oil - Cat food - Cheese curd - Cheese whey Cherries - Chicken paste - Chili con Carne Chocolate Chutney Cockles - Coconut oil - Cod oil Coffee liquor Cordials -Corn oil MICROTECH ENGINEERING Lobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, Pharmaceutical, and biotechnology. They are popular in these Diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (CIP/SIP) characteristics.These pumps offer a variety of lobe options including single, biwing, tri-lobe (shown), and multi-lobe.Rotary lobe pumps are Non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self- priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.

microtechengineering

lobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, pharmaceutical, and biotechnology. They are popular in these diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (cip/sip) characteristics.these pumps offer a variety of lobe options including single, biwing, tri-lobe (shown), and multi-lobe.rotary lobe pumps are non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self- priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.

how lobe pumps work liquid flows into the cavity and is trapped by the lobes as they rotate.lobe pumps are similar to external gear pumps in operation in that fluid flows around the interior of the casing. Unlike external gear pumps, however, the lobes do not make contact. Lobe contact is prevented by external timing gears located in the gearbox. Pump shaft support bearings are located in the gearbox, and since the bearings are out of the pumped liquid, pressure is limited by bearing location and shaft deflection.

1. As the lobes come out of mesh, they create expanding volume on the inlet side of thepump

2. Liquid travels around the interior of the casing in the pockets between the lobesand the casing it does not pass between the lobes.

applicationalcohol - apple pure apricots - baby food batter beans beer beetroot - biscuit cream blackcurrants brine broth -butter fat caramel - castor oil - cat food - cheese curd - cheese whey cherries - chicken paste - chili con carne chocolate chutney cockles - coconut oil - cod oil coffee liquor cordials -corn oil- corn syrup cottage cheese - cotton seed oil cranberry --

- juice - cream creamcheese custard - dog food dough eggs whole - egg yolk essences evaporated milk -fish flavorings - fondants-fruit juice - fruit pulp - fruit whole fruit -yogurt- gelatin gherkins glucose glycerin gooseberries gravy -- - hand cream honey horseradish - ice cream icings - iodine - ointment etc

Microtech engineering Lobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, Pharmaceutical, and biotechnology. They are popular in these Diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (CIP/SIP) characteristics. These pumps offer a variety of lobe options including single, biwing, tri-lobe (shown), and multi-lobe.Rotary lobe pumps are Non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self- priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.

How Lobe Pumps Work Liquid flows into the cavity and is trapped by the lobes as they rotate : 

• Lobe pumps are similar to external gear pumps in operation in that fluid flows around the interior of the casing. Unlike external gear pumps, however, the lobes do not make contact. Lobe contact is prevented by external timing gears located in the gearbox. Pump shaft support bearings are located in the gearbox, and since the bearings are out of the pumped liquid, pressure is limited by bearing location and shaft deflection.
  • As the lobes come out of mesh, they create expanding volume on the inlet side of the pump
  • Liquid travels around the interior of the casing in the pockets between the lobes and the casing it does not pass between the lobes.
  • Finally, the meshing of the lobes forces liquid through the outlet port under pressure.

• Lobe pumps are frequently used in food applications because they handle solids without damaging the product. Particle size pumped can be much larger in lobe pumps than in other Positive Displacement Pump types. Since the lobes do not make contact, and clearances are not as close as in other Positive Displacement Pump, this design handles low viscosity liquids with diminished performance. Loading characteristics are not as good as other designs, and suction ability is low. High-viscosity liquids require reduced speeds to achieve satisfactory performance. Reductions of 25% of rated speed and lower are common with high-viscosity liquids.

Advantages

• Pass medium solids
• No metal-to-metal contact
• Superior CIP/SIP capabilities
• Long term dry run (with lubrication to seals)
• Non-pulsating discharge

Disadvantages

• Requires timing gears
• Requires two seals
• Reduced lift with thin

Application : Alcohol - Apple pure – Apricots - Baby food – Batter – Beans – Beer Beetroot - Biscuit Cream – Blackcurrants – Brine –Broth -Butter  fat Caramel - Castor Oil - Cat food - Cheese curd - Cheese whey – Cherries - Chicken paste - Chili con – Carne –Chocolate – Chutney – Cockles - Coconut oil - Cod oil – Coffee –liquor – Cordials -Corn oil - Corn syrup – Cottage – cheese - Cotton seed – oil –Cranberry  --- juice - Cream – Cream cheese – Custard - Dog food – Dough – Eggs – whole - Egg yolk – Essences – Evaporated –milk -Fish –- Iodine - ointment etc.

industrial rotary lobe pump

industrial rotary lobe pump
microtechengineeringlobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, pharmaceutical, and biotechnology. They are popular in these diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (cip/sip) characteristics.these pumps offer a variety of lobe options including single, biwing, tri-lobe (shown), and multi-lobe.rotary lobe pumps are non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self- priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.industrial rotary lobe pump

• chemical recirculation process pump
• head : 48 meter
• capacity : 33 m3/h
• delivery size : 12mm to 65 mm
• temperature : -10 to 95 degree celsius
• test pressure : 10 kg/cm2

• application
• milk, cream, butter milk condensed milk
• fruit juice, beer, wine, sugar syrup
• vitamin solutions, sugar & confectionery.
• r o water, dm water, pure water.
• water for injection (wfi)
• vegetable oil, mineral oil, lub oil etc.
• pharmaceutical formulations, syrup etc.
• alkaline solutions / alcoholic drinks
• acids, fine chemicals
• textile sizing, dyeing & finishing systems
• natural cellulose fiber / synthetic fiber system
• hot & cold water pumping.
• bottling plants, soft drinks & distillery
• food processing / liquid food stuffs

microtechengineering

lobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, pharmaceutical, and biotechnology. They are popular in these diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (cip/sip) characteristics.these pumps offer a variety of lobe options including single, biwing, tri-lobe (shown), and multi-lobe.rotary lobe pumps are non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self- priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.

• item code: meotp

microtech engineering

lobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, pharmaceutical, and biotechnology. they are popular in these diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (cip/sip) characteristics.these pumps offer a variety of lobe options including single, biwing, tri-lobe (shown), and multi-lobe.rotary lobe pumps are non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. they are also used to handle slurries, pastes, and a wide variety of other liquids. if wetted, they offer self- priming performance. a gentle pumping action minimizes product degradation. they also offer reversible flows and can operate dry for long periods of time. flow is relatively independent of changes in process pressure, so output is constant and continuous.

Microtechengineering Lobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, Pharmaceutical, and biotechnology. They are popular in these Diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (CIP/SIP) characteristics.These pumps offer a variety of lobe options including single, biwing, tri-lobe (shown), and multi-lobe.Rotary lobe pumps are Non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self- priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.
How Lobe Pumps Work Liquid flows into the cavity and is trapped by the lobes as they rotate.

Lobe pumps are similar to external gear pumps in operation in that fluid flows around the interior of the casing. Unlike external gear pumps, however, the lobes do not make contact. Lobe contact is prevented by external timinggears located in the gearbox. Pump shaft support bearings are located in the gearbox, and since the bearings are out

of the pumped liquid, pressure is limited by bearing location and shaft deflection.

Application:

Alcohol - Apple pure Apricots - Baby food Batter Beans Beer Beetroot - Biscuit Cream Blackcurrants Brine Broth -Butter fat Caramel - Castor Oil - Cat food - Cheese curd - Cheese whey Cherries - Chicken paste - Chili con Carne Chocolate Chutney Cockles - Coconut oil - Cod oil Coffee liquor Cordials -Corn oil- Corn syrup Cottage cheese - Cotton seed oil Cranberry --

- juice - Cream Creamcheese Custard - Dog food Dough Eggs whole - Egg yolk Essences Evaporated milk -Fish - Iodine - ointment etc

Industrial Rotary Lobe Pump

Microtechengineering Lobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, Pharmaceutical, and biotechnology. They are popular in these Diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (CIP/SIP) characteristics.These pumps offer a variety of lobe options including single, biwing, tri-lobe (shown), and multi-lobe.Rotary lobe pumps are Non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self- priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.Industrial Rotary Lobe Pump

• Item Code: MERLP

microtechengineering

lobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, pharmaceutical, and biotechnology. They are popular in these diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (cip/sip) characteristics.these pumps offer a variety of lobe options including single, biwing, tri-lobe (shown), and multi-lobe.rotary lobe pumps are non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self- priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.

how lobe pumps work liquid flows into the cavity and is trapped by the lobes as they rotate.lobe pumps are similar to external gear pumps in operation in that fluid flows around the interior of the casing. Unlike external gear pumps, however, the lobes do not make contact. Lobe contact is prevented by external timing gears located in the gearbox. Pump shaft support bearings are located in the gearbox, and since the bearings are out of the pumped liquid, pressure is limited by bearing location and shaft deflection.

application

alcohol - apple pure apricots - baby food batter beans beer beetroot - biscuit cream blackcurrants brine broth -butter fat caramel - castor oil - cat food - cheese curd - cheese whey cherries - chicken paste - chili con carne chocolate chutney cockles - coconut oil - cod oil coffee liquor cordials -corn oil

- corn syrup cottage cheese - cotton seed oil cranberry --

- juice - cream creamcheese custard - dog food dough eggs whole - egg yolk essences evaporated milk -fish flavorings - fondants-fruit juice - fruit pulp - fruit whole fruit -yogurt- gelatin gherkins glucose glycerin gooseberries gravy -- - hand cream honey horseradish - ice cream icings - iodine - ointment etc

Microtechengineering

Lobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, Pharmaceutical, and biotechnology. They are popular in these Diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (CIP/SIP) characteristics.These pumps offer a variety of lobe options including single, biwing, tri-lobe (shown), and multi-lobe.Rotary lobe pumps are Non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self- priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.
How Lobe Pumps Work Liquid flows into the cavity and is trapped by the lobes as they rotate.

Lobe pumps are similar to external gear pumps in operation in that fluid flows around the interior of the casing. Unlike external gear pumps, however, the lobes do not make contact. Lobe contact is prevented by external timinggears located in the gearbox. Pump shaft support bearings are located in the gearbox, and since the bearings are out

of the pumped liquid, pressure is limited by bearing location and shaft deflection.

Aapplication

Alcohol - Apple pure Apricots - Baby food Batter Beans Beer Beetroot - Biscuit Cream Blackcurrants Brine Broth -Butter fat Caramel - Castor Oil - Cat food - Cheese curd - Cheese whey Cherries - Chicken paste - Chili con Carne Chocolate Chutney Cockles - Coconut oil - Cod oil Coffee liquor Cordials -Corn oil

- Corn syrup Cottage cheese - Cotton seed oil Cranberry --

- juice - Cream Cream cheese Custard - Dog food Dough Eggs whole - Egg yolk Essences Evaporated milk -Fish - Iodine - ointment etc