GST : 07AASFM3267H1ZV
Verified
Write a Review
Our Products
Our trouble free series of Wave Spring Seals is non-clogging thus fits in all condition. The retainer type Wave Spring Seals are designed for dirty applications. Available in WO series, Wave Spring Seals is easily interchangeable and an easy solution for the industrial applications.
We are instrumental in offering superior quality Multi Spring Seals that are very commonly used in all kind of clear, non-corrosive and lubricating liquids in most of equipments. These Multi Spring Bi-Directional Mechanical Seals have many springs that cause uniform pressure all over seal faces and ensure the reliability under all conditions & result in better life. Our Multi Spring Bi-Directional Mechanical Seals are available in Series. Easy to Install, narrow cross-section area is very compact & simple. It is easy to install in smallest stuffing box and maintain. Our Multi Spring Bi-Directional Mechanical Seals are cost-effective because all parts are interchangeable, and can be converted from an unbalanced seals to a balanced seal by changing only the carbon. This means fewer spares to stock and much easier maintenance. These Multi Spring Bi-Directional Mechanical Seals can also be offered in double configuration for toxic, hazardous, costly & volatile liquids.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : WOODEN BOX.
Delivery Time : READY STOCK
mechanical seals manufacturer in delhi
We offer multi spring seals that are most commonly used mechanical seals for all kinds of fluids and non-corrosive liquids. These multi spring seals can be used with different equipment that has rotating shafts such as pumps, mixers and agitators. Multiple spring design ensures uniform loading of seal face and components for acceptable shaft misalignment. Our range of multi spring seals is offered in balance as well as in unbalance configuration. We use viton or PTFE as a secondary packing.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : WOODEN BOX.
Delivery Time : READY STOCK
single cartridge seal, suitable for petrochemical chemistry and paper making, medical industry.mechanical seal manufacture . Is the advanced designer & manufacturer of mechanical seal, the range involves in: industrial pump mechanical seal, mixer and agitator seal, cartridge seal, metal bellows seal, auto cooling pump seal and auto air-condition compressor lip seal.
cartridge seal
single cartridge seal, suitable for petrochemical chemistry and paper making, medical industry.mechanical seal manufacture . Is the advanced designer & manufacturer of mechanical seal, the range involves in: industrial pump mechanical seal, mixer and agitator seal, cartridge seal, metal bellows seal, auto cooling pump seal and auto air-condition compressor lip seal.
cartridge seal
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : WOODEN BOX.
Delivery Time : READY STOCK
Metal Bellow Seal Description : Has rotating bellows & stationary bellow assemblies Balanced for pressure up to 350 PS18 (24 Bar) & temperature up to 400oC
Metal Bellow Seal
Description :
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : WOODEN BOX.
Delivery Time : READY STOCK
Microtech Engineering Mechanical Seals Are Multi Spring, Pusher Type Balanced Seals Suiting High Pressure Application. The Seals Are Compact In Design Suiting All Type Of Rotating Equipments – Pumps And Mixers. Drive Lugs In The Retainer Will Provide Torque Transmission And Reduce Slippage On Shaft And Sleeve . A Snap Ring Holds All Components Together, Helping In Easy Installation. The Parts Are Interchangeable Qe500 Can Be Converted To Qe501 By Just Changing The Seal Ring And Secondary Member.
Seal Characteristics
Applications
Performance Range
| Shaft Diameter | 18…100mm |
|---|---|
| Pressure | 10 bar (max) |
| Temperature | -20…..4000C |
| Velocity | 20 m/sec |
Material
| Seal faces | Carbon, Ceramic, Sic, Tung, Carbide |
|---|---|
| Metal Parts | SS31, Hastelloy -C, Alloy 20 |
| Packing | Elastomers,(500) PTFE (501) |
Unbalanced mechanical seal, suitable for general purposes, good stablility and alignment between faces, suitable for abrasive fluids and others with polymerizing tendency.
Our trouble free series of Wave Spring Seals is non-clogging thus fits in all condition. The retainer type Wave Spring Seals are designed for dirty applications. Available in WO series, Wave Spring Seals is easily interchangeable and an easy solution for the industrial applications.
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : WOODEN BOX.
Delivery Time : READY STOCK
Teflon PTFE Bellow Seals are designed to handle highly corrosive liquids. PTFE Bellow seals are outside mounted with simple installation procedure and hence cost effective for corrosive media sealing. Teflon Bellow Mechanical seals has been designated as Fixed & replaceable bellow face respectively.For replaceable version there is flexibility for selection of face material as per the media to be sealed, which can be easily removed & replaced. Application used in acids, alkalis & extremely corrosive chemical , Strong Oxidising and all corrosive services . Operating Limits Pressure : 5 bars (Max) Temperature : (-)20c to (+)90c Speed : 2900 rpm (Max) Sizes : 16 mm to 100 mm
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : WOODEN BOX.
Delivery Time : READY STOCK
Eries Meqe502 Seals Specially Designed For High Temperature Application And Suitable For High Start – Up Toque Since The Bellows Unit Is Independent Of Torque Transmission. Graf Oil Is Secondary Member Having Excellent Temperature Rang Up To 4000c . Shrunk Fit Seal Face Design Minimize Face Distortion Restricting Leakage And Wear Rate To Very Low Level Under Of Condition.
Seal Characteristics
Applications
Performance Range
| Shaft Diameter | 18…100mm |
|---|---|
| Pressure | 20 bar (max) |
| Temperature | -20…..4000C |
| Velocity | 20 m/sec |
Material
| Seal faces | Carbon, Sic,Tung, Carbide |
|---|---|
| Metal Parts | SS316, Hastelloy -C, Alloy 20, Carpenter 42. |
| Packing | Graf oil |
We use extruded pipes and steel pipes to make compound pipes through special processing. PTFE compound pipes and fitting with steel linings work properly in the conditions with pressure -70kpa+1.6mpa, medium working temperature -100oC+25oC, they are anti-corrosive with almost all chemical media, including nitricacid and sulphuric acid, besides, they may work properly in the temperature between 230oC and 253oC for a long period while other pipes could not meet this condition. PTFE Bellows Specification
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : WOODEN BOX.
Delivery Time : READY STOCK
Microtech Engineering is single conical spring, unbalanced seal with O-ring provided for secondary sealing. Since the Torque transmission is done by the single coil springs the seals are dependent on the directions of rotation, which is seen from the drive end of the shaft. Right handed spring and left handed springs are provided for clockwise and anticlockwise rotating shafts respectively. These seals can carry a variety of seals faces, serving application in submersible, sewage, chemical transfer, water pumps etc. Seal Characteristics Single Seal Unbalanced Conical spring Dependent on directions of rotation Application Water pumps Submersible pump Sewage pump Performance Range Shaft Diameter dl : 10.100mm Pressure p : 10 bar (max) Temperature t : -20.1800C Velocity v : 10 msec Materials Seal Faces : Carbon, Ceramic, SiC, Tung. Carbide Metal Parts : SS304, SS316 O-rings : Elastomers, TTV
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : WOODEN BOX.
Delivery Time : READY STOCK
Series Meqe100 Is Single Conical Spring, Seal With O-ring Provided For Secondary Sealing. Since The Torque Transmission Is Done By The Single Coil Spring The Seals Are Dependent On The Direction Of Rotation, Which Is Seen From The Drive End Of The Shaft Right Handed Spring And Left Handed Springs Are Provided For Clockwise And Anticlockwise Rotating Shafts Respectively. These Seals Can Carry A Variety Of Seals Faces, Serving Application In Submersible, Sewage, Chemical Transfer, Water Pumps Etc.
Seal Characteristics
Applications
Additional Information:
Payment Terms : L/C, D/A, D/P, T/T, Western Union,
Packaging Details : WOODEN BOX.
Delivery Time : READY STOCK
Performance Range
| Shaft Diameter | 10…100mm |
|---|---|
| Pressure | 10 bar (max) |
| Temperature | -20…..1800C |
| Velocity | 10 m/sec |
Material
| Seal faces | Carbon, Ceramic Sic,Tung, Carbide |
|---|---|
| Metal Parts | SS304, SS316 |
| O- ring | Elastomers, PTFE |
Mr. Mahtab Khan (Microtech Engineering)
L-89, Near Bharat Shakti Public School, Krishna Vihar, delhi - 110086, India
Share us via
View Contact Number 
