Microtech Engineering

Krishna Vihar, delhi

Our AOD pump usually pumping several kind of fluid and liquids. Such as pumping paint, solvet, sluge, oil, acid, alkali and other chemical liquid. Max Flow Capacity: 180 Literper min. or 48 Gallonper min. Discharge Volume Per Cycle: 1.5 Liter or 0.4 Gallon Air inlet: 38" BSP(female) Air exhaust: 38" BSP(female) Air Supply Pressure: 15 to 120 PSI ( 1.0 to 8.3 kgfcm2) Fluid inletoutlet: 1" BSP(female) Max. operated pressure: 8.3 bar Max. suction Lift capability: 5.3m Max. diameter solids: 3 mm Product material: Aluminium-center body, S.S 316-housing, pipes Net Weight: 15kgs Gross Weight: 16kgs

Microtech Engineering Lobe pumps are used in a variety of industries including, pulp and paper, chemical, food, beverage, Pharmaceutical, and biotechnology. They are popular in these Diverse industries because they offer superb sanitary qualities, high efficiency, reliability, corrosion resistance, and good clean-in-place and sterilize-in-place (CIP/SIP) characteristics. These pumps offer a variety of lobe options including single, biwing, tri-lobe (shown), and multi-lobe. Rotary lobe pumps are Non-contacting and have large pumping chambers, allowing them to handle solids such as cherries or olives without damage. They are also used to handle slurries, pastes, and a wide variety of other liquids. If wetted, they offer self- priming performance. A gentle pumping action minimizes product degradation. They also offer reversible flows and can operate dry for long periods of time. Flow is relatively independent of changes in process pressure, so output is constant and continuous.

Specifications

• As the rotors start to rotate, an expanding cavity is formed by rotation of the lobes which creates a vacuum at the inlet port, drawing liquid in pumping chamber.
• The product liquid is carried between the lobes and positively displaced, thereby sealing itself against the internal faces of the pump casing.
• The other lobe chamber is filed with the product liquid and about to commence it's discharge cycle.
• Finally the product liquid is forced or pressed out of discharge port of the pump in continuous smooth flow and pressure generated by the meshing of the lobe rotors

How Lobe Pumps Work Liquid flows into the cavity and is trapped by the lobes as they rotate : Lobe pumps are similar to external gear pumps in operation in that fluid flows around the interior of the casing. Unlike external gear pumps, however, the lobes do not make contact. Lobe contact is prevented by external timinggears located in the gearbox. Pump shaft support bearings are located in the gearbox, and since the bearings are out of the pumped liquid, pressure is limited by bearing location and shaft deflection.

Advantages

• Pass medium solids
• No metal-to-metal contact
• Superior CIP/SIP capabilities
• Long term dry run (with lubrication to seals)
• Non-pulsating discharge

Disadvantages

• Requires timing gears
• Requires two seals
• Reduced lift with thin

Application : Alcohol - Apple pure Apricots - Baby food Batter Beans Beer Beetroot - Biscuit Cream Blackcurrants Brine Broth -Butter fat Caramel - Castor Oil - Cat food - Cheese curd - Cheese whey Cherries - Chicken paste - Chili con Carne Chocolate Chutney Cockles - Coconut oil - Cod oil Coffee liquor Cordials -Corn oil- Corn syrup Cottage cheese - Cotton seed oil Cranberry --- juice - Cream Cream cheese Custard - Dog food Dough Eggs whole - Egg yolk Essences Evaporated milk -Fish - Iodine - ointment etc

We are one of the prominent Manufacturers, Exporters and Suppliers of Dairy Pump. Under this range, we offer Beverage Pump, Food Processing Pump, Hygienic Pump, Milk Transfer Pump and Sparkler Filter Press Pump. Our clients have always appreciated our range of Dairy Pumps for their high efficiency and quality. These Dairy Pumps are manufactured from high grade components and technologically advanced machinery to ensure higher customer satisfaction. Specifications Head : 48 meter Capacity : 33 m3h Delivery size : 12mm to 65 mm Temperature : 10 to 95 degree Celsius Test pressure : 10 kgcm2 Standard Features Centrifugal single stage Flange as per din standard Design : Back pull out Impeller : Open close Shaft sealing : Single doable mechanical seal Sealed grease lubricated , deep grove ball bearing Pump handle liquid having viscosities up to 1500 centrioles Flame proof motor Optional Features Shaft sealing by gland packing Bearing lubricating by oil Ansi drilling on din flanges Trolley mounting arrangement Various type of connection Material Casing : St. Steel ( CF8 CF8M ) Shaft : St. Steel ( SS 410 SS 316 SS 304 ) Impeller : St. Steel ( SS 410 SS 316 SS 304 ) Back Plate : St. Steel ( SS 410 SS 316 SS 304 ) Mechanical Seal : TCTC , SICSIC TEFLON GFT Motor Cover : SS 304 , SS 316 Gasket : Viton Nitrile Silicon PTFE Applications Dairy industries Food processing plant Pharmaceutical industries Sugar & confectionery Bottling plants Distillery Beverages Water treatment plants Colors dies & pigments paints Descaling application Sagar industries Hot & cold water pumping Sparkling filter press Sugar syrup Chemical processing Reliability : The pump are hydraulically designed for maximum efficiency. Every pump passes through stringent process & quality control plans and is designed to give longer life with consistent performance and trouble free service.

Microtech manufacture a wide range of High Pressure Triplex Pump (Model 2) which can be customized as per the specifications of our clients. These are fabricated using superior quality raw material and possess following features:

Operates with GPM and 100 PSI to higher flows

Liquid-end construction in forged brass, nickel aluminum bronze and duplex stainless steel

Wide range of high pressure liquid pumping applications served with these pump