Verified
Write a Review
Our Products
Level Transmitters
2 Products availableLaboratory Equipments
1 Products availableGas Analyzers
1 Products availableProcess Control Systems & Equipment
1 Products availableTransducer
1 Products availableLeading Manufacturer, Supplier & Retailer of Online Panel Mounted Transmitter, PH Transmitters MS PH 27 B, PH Sensor Flow Cell, DO Sensor Housing and Field Mounted PH Indicating Transmitters.
On-line Panel Mounted pH Indicator cum Transmitter MS pH 19
INTRODUCTION : MicroSet Digital pH meter Type MS pH 19 is a precise and compact pH Indicating System using latest technology of electronics for direct measurement of pH. The high input impedance, accuracy and the stability of its measuring circuit enable it to make the measurements with precision and reproducibility.
| Specification | ||
| Range | : | 0 14 pH |
| Accuracy | : | 0.01 pH |
| Display | : | 3 Digit, 14 mm Red LED |
| Repeatability | : | 1 LSB |
| Retransmission | : | 4 to 20 mA Isolated |
| Power Supply | : | 220-240 VAC, 50-60 Hz |
| Enclosure | : | ABS |
| Size | : | 96 x 96 mm |
These reliable transmitters provide a simple solution for monitoring or as part of an advanced control solution. The MicroSet pH transmitter offers a simple yet effective solution to your fluid monitoring needs and can also be used as a component within a more advanced system.
| Specification | ||
| Range | : | 0.00 to 14.00 pH |
| Input | : | pH Combination Sensor with BNC Connector Female |
| Accuracy | : | 0.05 pH |
| Calibration | : | 2 points Manual ( 4.00 & 7.00 pH Buffers) |
| Output | : | 4 to 20 mA DC Isolated |
| Load | : | 600 Ohm |
| Mounting | : | Wall Mounted |
| Enclosure | : | ABS Weatherproof IP 65 |
| Dimensions | : | 80 x 120 x 55 mm |
| Glands | : | PVC PG 9 02 Nos. |
| Power | : | 240 VAC |
Note : Due Continues improvement in Product the Specifications may vary
Table Top pH Meter Microprocessor based design MS pH 644
MicroSet pH meter is highly precision Instrument using latest art of technology. It Displays three function constantly on 16x 2 LCD i.e. Temp., pH & mill volt on selection. It has the facility for Auto Temp. compensation as well as manually using keys. In mVs mode the instrument can be used for Redox Potential measurement. Automatic standardization using buffers & keys is made by selecting 7.00, 4.00 & 9.20 pH value. Buffers / Electrode slope error are indicated on screen.Optinal printer interface is available for pH & Temp.The Instrument is housed in a very compact ABS plastic cabinet with attractive finish & light weight for handling.pH & Temp. Sensor if open or contact problem is displayed as OPEN
| Specifications | |||
| pH Mode | mV Mode | ||
| Range | : | 0 to 14 pH | 0 to 1900 mV |
| Resolution | : | 0.01 pH | 1 mV |
| Accuracy | : | 0.01 pH 1 digit | 1 mV 1 digit |
| Buffer calibration | : | 7.00, 4.00, 9.20 pH | |
| Temp. Range | : | 0 to 100C with continuous display | |
| Resolution | : | 0.1C | |
| Temp.Compensation | : | Automatic & Manual | |
| Display | : | 16 characters x 2 Line LCD Backlit | |
| Polarity & Decimal | : | Automatic | |
| Supply | : | 230 VAC | |
| Dimensions | : | 180 mm x 130 mm | |
| Weight | : | 750 gm | |
| Technical Specification | ||
| MOC | : | HDPE |
| Temp Range | : | 0-80C |
| Process Connection for Sensor | : | BSP Female |
| Process Connection for Sensor | : | BSP Female |
ORP Indicator - MS ORP 19
| Specification | ||
| Range | : | 2000 mV |
| Resolution | : | 1mV |
| Repeatability | : | 1mV |
| Accuracy | : | 0.2 % of Range |
| Display | : | 4 digit LED with auto decimal & Polarity |
| Power Supply | : | 220-240 VAC, 50/60 Hz |
| Enclosure | : | ABS |
| Size | : | 96 x 96 x 100 mm |
DO Sensor Housing for Fermentors Model 9232
| Specification | ||
| Body | : | S 316 L |
| Pressure | : | 6 Bar |
| Temperature | : | 0150C |
| Process Connection | : | DN 25 ( Ingold) |
Flow Rate Indicating Totalizer cum Batcher MS FL 27
| Specification | ||
| Type | : | 4 to 20 mA DC |
| Range | : | Programmable |
| Unit | : | Programmable |
| Set Points | : | 02 Nos. |
| Output | : | 02 Nos. Potential Free Relay |
| Retransmission Output | : | 420 mA DC Isolated |
| Mounting | : | Panel Mounted |
| Dimensions | : | 96 x96 x 100 mm |
| Supply | : | 230 VAC |
Ultrasonic Level Indicating Transmitter 2-Wire - MS LL 18
INTRODUCTION2-Wire display system with Ultrasonic Level Transmitter is developed by MicroSet with advantages of a variety of similar products, using the latest energy-saving components, the whole current is less than 3.5 mA, it can work in the 932 V dc power supply voltage reliably. With LCD display for setting the scene easily. APPLICATION Water and Sewage Treatment, Pumping Stations, Collection Wells, Chemical and Biological Reaction Tanks, Sedimentation Tanks, etc. Power, Mining, Slurry pool, Coal Slurry Ponds, Water Treatment, etc.
| Specification | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Performance Indicators | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Range | : | 05 m | ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
| Blind Spot | : |
View Complete Details
 Ultrasonic Level TransmitterSALIENT FEATURES
DESCRIPTIONMicroSet series MS ULT - 311 is a 4 wire Ultrasonic Level Transmitters specially designed for non contact type level measurement. Ultrasonic level measurement is based on the time required by ultrasonic pulses to travel from sensor & surface of liquid & back to sensor. Ultrasonic level transmitters are the best for applications such as slurries, corrosive liquids & waste water. The transmitter provides 4-20 mA DC continuous output with local indication through LCD. The measuring range is available from 0.6 to 8 meter.
NOTE : Process temperature & pressure exceeding specified limits, kindly consult with factory.  Field Mounted PH Indicating Transmitters
 PH Indicators
It is an economical meter for online measurement of specific TDS of solution using a TDS cell for R.O plant or D.M plant applications. It enables to measure the TDS without manual balancing and specific TDS is read directly on a digital panel. This is available in panel mounting facility in compact size.
 PH Sensor HousingpH Sensor Housing For Fermentors Model 330
Tell Us What are you looking for? Will call you back
Contact Us
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Sangamvadi, Pune, Maharashtra 
