micro pneumatics pvt. ltd

Vasai, Mumbai, Maharashtra

Designed & Manufactured as per Industry Standards

End Connection: ASME B 16.25

The stem assembly consists of Belleville Washer set over the gland and tightened by gland nut assured zero gland leakage, due to live loading of gland.

• Mounting InterfaceISO 5211
• MOC of the BodyCF8, CF8M, CF3, CF3M (Electropolished)
• TrimCF8, CF8M, CF3, CF3M (Mirror polished)
• SeatPTFE (Special on request)
• Cavity FillerPTFE

• Sizeto 4
• Pressure RatingPN 10
• ConstructionRB, 3 piece

Designed & Manufactured as per Industry Standards.

End Connection: ANSI / ASME B 1.20.1:1993 / BS 21.

The stem assembly consists of Belleville Washer set over the gland tightened by gland nut assured zero gland leakage, due to live loading of gland.

• Mounting InterfaceISO 5211
• MOC of the BodyWCB, CF8, CF8M, CF3, CF3M (special on request)
• TrimCF8, CF8M, CF3, CF3M (special on request)
• SeatPTFE, RPTFE, CFT, GFT(Special on request)
• Cavity FillerPTFE RPTFE CFT

Designed & Manufactured as per Industry Standards

End Connection: ASME B16.11

The stem assembly consists of Belleville Washer set over the gland and tightened by gland nut assured zero gland leakage, due to live loading of gland.

Designed & Manufactured as per Industry Standards

End Connection: ASME B16.25

The stem assembly consists of Belleville Washer set over the gland and tightened by gland nut assured zero gland leakage, due to live loading of gland.

2 Piece Designed ball Valve Body with minimum 3.5 mm thermoplastic lining of PFA, FEP and PVDF, one piece ball and Stem with minimum lining of 3 mm of PFA, FEP and PVDF universally used for highly corrosive and chemical application.

Full lining thickness in the sealing zone however provides security against permeating media. Live-loaded PTFE seat rings, a permanent tightness is ensured for pressure, temperature and vacuum.

• Designed and manufactured as per GMP Norms and ISO 2852.
• Mainly used in Pharmaceuticals, Food and Beverage Industries. Ease to separate from pipe line to flush out periodically.
• Valve surface roughness achieved with electro polish and a series of grit polish.

• Mounting InterfaceISO 5211
• MOC of the BodyCF8, CF8M, CF3, CF3M (Electro polished and internal surface Buffed )
• TrimCF8, CF8M, CF3 CF3M (Mirror Polished)
• SeatPTFE

• Sizeto 6
• Pressure RatingPN 10
• ConstructionFB, 3 piece

High Purity Ball Valve: Designed and manufactured as per GMP norms, ISO 2852 and ASME / BPE 1997 / API 6D

Typically used in Bio Pharma, Pharmaceuticals, Food & Beverage Industry.

A series of grit polishes is applied in a successively finer sequence until the desired finish or surface roughness achieved on the internal surface of the valve and components.

The integrated seat with cavity filler prevents fluids entrapment leading to contamination and cavity fillers ensures clean internals.

• • Designed & Manufactured as per Industry Standards
  • Pressure Testing API 6D, API 598, BS 6755.
  • Fire Test API 6FA, BS 6755 Part II

  Designs

  • Floating Ball Valve
  • Trunnion Mounted Ball Valve.

  Floating Design

  • Independent Ball and Stem to minimize the effect of the side thrust generated by the pressure acting on the Ball. Two independent Floating Seat Rings assure Bidirectional zero leakage at maximum rated pressure.

  Trunnion Mounted Ball Design

  • The ball is fixed and the seat rings are floating free to move along the Valve Axis. At low pressure the Seat Sealing action is achieved by the thrust of the springs actions on the seat rings. As the pressure increases the seat rings are pushed against the ball.
  • Mounting InterfaceISO 5211
  • MOC of the BodyWCB, CF8, CF8M, CF3, CF3M (Special on request)
  • TrimCF8, CF8M, CF3, CF3M (Special on request)
  • SeatPTFE, RPTFE, CFT, GFT, CO8023 (High Temperature), PCTFE (Cryogenic)
  • Sizeto 16
  • Pressure RatingASME 150# , ASME 300#(Higher rating on request )
  • ConstructionFB, 2 piece / 3 piece.RB, 2 piece

• Jacketed ball valves are used for high viscous Media like Resin or Slurry applications which solidifies at certain temperature range thereby affecting flow ability of media.
• The Jackets assure consistent valve heating or cooling of process media to prevent crystallization or siezing of flow media.
• The jacket covers the body from one flange to the other flange. Hence the valve body is modified by adding over size flanges than standard size of the valve flange.

The three way ball valve is configured with Shut-off. The three ports are configured as on at bottom and one each on the right and left of the valves. With this, three way shut-off ball valve, the two different Medias can flow separately from either of the two sides of the valve to the bottom side of the valve and can be stopped.Alternately the three way shut off ball valve is features for diverting single media from the bottom port of the valve is either side, with shutting off of the media.With a single three way ball valve shut off is also achieved.

The valve is compact segmented ball type designed to open directly in the Tank, Reactor, for 100% flushing or discharging of material. The cavity in-between ball and Body filled with PTFE or application suitable cavity filler to prevent fluids entrapment leading to contamination and production loss.he specified size consists of one higher size flange for the tank mounting and the valve is bolted to the tank bottom with gasket for ball opening into the tank.Designs: MPPL flush Bottom Valves are designed in single piece, two piece and three piece construction to suit tank design. The high end operational measurement and temperature sensing of the reaction is possible with MPPL Flush Bottom Valve.