MPS rotary tillers are made using innovative state of the art technology to tackle the toughest chores. In a single shot, bull rotary tiller ploughs, pulverizes & levels the soil to make a perfect seed bed. This 3 in 1 mechanized process is used for land preparation, the job faster than other conventional methods and it helps the farmers to save their valuable time, tractor fuel, manpower & money. Rotary tillers are designed specially with interchangeable gear and chain. This helps the farmer to do their work easily in a short time without changing the other parts of the rotary tiller.

The power steering unit is an essential component for steering of the heavy duty vehicles, which provide higher steering power, reliability, comfort and safety.

The power steering unit is classified asa hydrostatic steering system. This is not a mechanical connection between a steering column and steered wheels but the connection between a power steering unit and steering cylinders by use of hydraulic hoses and pipes.

By the power steering unit the drivers steering operation controls the directions and pressure of the oil from the pump.

The oil flows into the steering cylinders(left or right) and the same volume goes back to tank. The steering wheel controls the direction and wheels are turned proportionally as steering wheel turns.

The power steering unit is used normally for industrial vehicles, constructional equipments, marine ships, and servo-type systems that are needed to control directions and positions.

The advantages of the power steering unit :

• Minimization of the steering linkage (by replacing the mechanical link with flexible hose) - Design flexibility and cost-down

• Preventing the wheels from transferring the load to the steering column- Reducing the drivers fatigue
• Low input torque and continuous steering function- Oil output directly proportional to the steering speed
• Wide range of choices of gerotor displacement
• Various hydraulic systems available to fit the optimum system design

The automotive steering column is a device intended primarily for connecting the steering wheel to the steering mechanism or transferring the driver's input torque from the steering wheel.

A steering column may also perform the following secondary functions:

• Energy dissipation management in the event of any frontal collision.
• Provide mounting for: the multi-function switch, column lock, column wiring, column shroud(s), transmission gear selector, gauges or other instruments as well as the electro motor and gear units found in EPAS and SBW systems.
• Offer (height and/or length) adjustment to suit driver preference

Gear pump is one of the most common types of pumps for hydraulic fluid power applications. They carry pressurized hydraulic fluid to drive actuator such as hydraulic cylinder and hydraulic motor, etc. As the gears rotate they separate on the intake side of the pump, creating suction which is filled by fluid.

The fluid is carried by the gears to the discharge side of the pump, where the meshing of the gears displaces the fluid.

Directional control valvesare one of the most fundamental parts inhydraulic machineryas well and pneumatic machinery. They allow fluid flow into different paths from one or more sources. They usually consist of a spool inside a cylinder which is mechanically or electrically controlled. The movement of the spool restricts or permits the flow, thus it controls the fluid flow.

The spool (sliding type) consists of lands and grooves.The lands block oil flow through the valve body. The grooves allow oil or gas to flow around the spool and through the valve body. There are two fundamental positions of directional control valve namelynormal positionwhere valve returns on removal of actuating force and other isworking positionwhich is position of a valve when actuating force is applied. There is another class of valves with 3 or more position that can be spring centered with2working positionand anormal position.

Directional control valves can be classified according to-

• Number of ports
• Number of positions
• Actuating methods
• Type of spool.

Example: A 5/2 directional control valve would have five ports and two spool positions.

TheTool Kitsmanufactured by us are specially developed keeping in view the various requirements of the user. We fabricate these Industrial Hand Tool Kits from excellent quality material after stringent quality control. We have marked our specialization in agricultural equipments and industrial tool kits as per the requirement of the customer that too in special models.

Complete Range of Tool Kits :

Our company offers all kinds of industrial tool kits, which includes general service tool set, basic service tool set, mechanics tool set, machine shop maintenance tool set, Electrician Tool set, Garage Maintenance tool set, Master Mechanic General Service Tools Set and Water Drilling Ring Tool Set.

Features :

• Number of Tools varies from the type of tools set
• Highly Durable Tools
• Requires low Maintenance
• Easy to Carry
• Divided in Various Sections

MPS rotary tillers are made using innovative state of the art technology to tackle the toughest chores. In a single shot, bull rotary tiller ploughs, pulverizes & levels the soil to make a perfect seed bed. This 3 in 1 mechanized process is used for land preparation, the job faster than other conventional methods and it helps the farmers to save their valuable time, tractor fuel, manpower & money. Rotary tillers are designed specially with interchangeable gear and chain. This helps the farmer to do their work easily in a short time without changing the other parts of the rotary tiller.

Product Range :

1) Double holes rotary blade *2) Tiller hoe*3) Rotary tiller blade*
* all sizes available

Micron supplies customized solutions in Hydraulic Cylinders to OEMs based on their requirements

MICRON Hydraulic Cylinders product range :

Single acting Cylinders
Double acting Cylinders,
Single acting and double acting telescopic Cylinders
Technical Specifications:
Tube Bore 40mm to 300mm, rod Dia-16mm to 200 mm, strokes up to 8000mm and working pressure up to 450Bar with various mounting options.

Apart from this MICRON also offers special application cylinders like:
3 stage and 4 stage Double Acting Telescopic Cylinders for Refuse Compactors.
Military Application Cylinders for -40 C Ambient Temperatures
High Pressure Extrusion Press - Working Fluid Distilled Mineral Water (98%)
Large bore Double acting Press Cylinder, Test Pressure @ 400Bar
Cylinders with position sensors and integrated valves.

MPS rotary tillers are made using innovative state of the art technology to tackle the toughest chores. In a single shot, bull rotary tiller ploughs, pulverizes & levels the soil to make a perfect seed bed. This 3 in 1 mechanized process is used for land preparation, the job faster than other conventional methods and it helps the farmers to save their valuable time, tractor fuel, manpower & money. Rotary tillers are designed specially with interchangeable gear and chain. This helps the farmer to do their work easily in a short time without changing the other parts of the rotary tiller.

The power steering unit is an essential component for steering of the heavy duty vehicles, which provide higher steering power, reliability, comfort and safety.

The power steering unit is classified asa hydrostatic steering system. This is not a mechanical connection between a steering column and steered wheels but the connection between a power steering unit and steering cylinders by use of hydraulic hoses and pipes.

By the power steering unit the drivers steering operation controls the directions and pressure of the oil from the pump.

The oil flows into the steering cylinders(left or right) and the same volume goes back to tank. The steering wheel controls the direction and wheels are turned proportionally as steering wheel turns.

The power steering unit is used normally for industrial vehicles, constructional equipments, marine ships, and servo-type systems that are needed to control directions and positions.

The advantages of the power steering unit :

• Minimization of the steering linkage (by replacing the mechanical link with flexible hose) - Design flexibility and cost-down

• Preventing the wheels from transferring the load to the steering column- Reducing the drivers fatigue
• Low input torque and continuous steering function- Oil output directly proportional to the steering speed
• Wide range of choices of gerotor displacement
• Various hydraulic systems available to fit the optimum system design

The automotive steering column is a device intended primarily for connecting the steering wheel to the steering mechanism or transferring the driver's input torque from the steering wheel.

A steering column may also perform the following secondary functions:

• Energy dissipation management in the event of any frontal collision.
• Provide mounting for: the multi-function switch, column lock, column wiring, column shroud(s), transmission gear selector, gauges or other instruments as well as the electro motor and gear units found in EPAS and SBW systems.
• Offer (height and/or length) adjustment to suit driver preference

Gear pump is one of the most common types of pumps for hydraulic fluid power applications. They carry pressurized hydraulic fluid to drive actuator such as hydraulic cylinder and hydraulic motor, etc. As the gears rotate they separate on the intake side of the pump, creating suction which is filled by fluid.

The fluid is carried by the gears to the discharge side of the pump, where the meshing of the gears displaces the fluid.

Directional control valvesare one of the most fundamental parts inhydraulic machineryas well and pneumatic machinery. They allow fluid flow into different paths from one or more sources. They usually consist of a spool inside a cylinder which is mechanically or electrically controlled. The movement of the spool restricts or permits the flow, thus it controls the fluid flow.

The spool (sliding type) consists of lands and grooves.The lands block oil flow through the valve body. The grooves allow oil or gas to flow around the spool and through the valve body. There are two fundamental positions of directional control valve namelynormal positionwhere valve returns on removal of actuating force and other isworking positionwhich is position of a valve when actuating force is applied. There is another class of valves with 3 or more position that can be spring centered with2working positionand anormal position.

Directional control valves can be classified according to-

• Number of ports
• Number of positions
• Actuating methods
• Type of spool.

Example: A 5/2 directional control valve would have five ports and two spool positions.

TheTool Kitsmanufactured by us are specially developed keeping in view the various requirements of the user. We fabricate these Industrial Hand Tool Kits from excellent quality material after stringent quality control. We have marked our specialization in agricultural equipments and industrial tool kits as per the requirement of the customer that too in special models.

Complete Range of Tool Kits :

Our company offers all kinds of industrial tool kits, which includes general service tool set, basic service tool set, mechanics tool set, machine shop maintenance tool set, Electrician Tool set, Garage Maintenance tool set, Master Mechanic General Service Tools Set and Water Drilling Ring Tool Set.

Features :

• Number of Tools varies from the type of tools set
• Highly Durable Tools
• Requires low Maintenance
• Easy to Carry
• Divided in Various Sections

MPS rotary tillers are made using innovative state of the art technology to tackle the toughest chores. In a single shot, bull rotary tiller ploughs, pulverizes & levels the soil to make a perfect seed bed. This 3 in 1 mechanized process is used for land preparation, the job faster than other conventional methods and it helps the farmers to save their valuable time, tractor fuel, manpower & money. Rotary tillers are designed specially with interchangeable gear and chain. This helps the farmer to do their work easily in a short time without changing the other parts of the rotary tiller.

Product Range :

1) Double holes rotary blade *2) Tiller hoe*3) Rotary tiller blade*
* all sizes available

Micron supplies customized solutions in Hydraulic Cylinders to OEMs based on their requirements

MICRON Hydraulic Cylinders product range :

Single acting Cylinders
Double acting Cylinders,
Single acting and double acting telescopic Cylinders
Technical Specifications:
Tube Bore 40mm to 300mm, rod Dia-16mm to 200 mm, strokes up to 8000mm and working pressure up to 450Bar with various mounting options.

Apart from this MICRON also offers special application cylinders like:
3 stage and 4 stage Double Acting Telescopic Cylinders for Refuse Compactors.
Military Application Cylinders for -40 C Ambient Temperatures
High Pressure Extrusion Press - Working Fluid Distilled Mineral Water (98%)
Large bore Double acting Press Cylinder, Test Pressure @ 400Bar
Cylinders with position sensors and integrated valves.