Our Products #1936485

We are offering floating carriage diameter measuring machine. The instrument is made as per nabl standard and used for calibration of thread plug gauges. Mainly used during manufacturing of thread gauges and in calibration laboratories

Effective Diameter Measuring Micrometer (EDMM) is also commonly known as FCM or Floating Carriage Micrometer. This instrument is used for accurate measurement of 'Thread Plug Gauges'. Gauge dimensions such as Outside diameter, Pitch diameter, and Root diameter are measured with the help of this instrument. All these dimensions have a vital role in the thread plug gauges, since the accuracy and interchangeability of the component depends on the gauges used. To reduce the effect of slight errors in the micrometer screws and measuring faces, this micrometer is basically used as comparator.

Robust graded cast iron body. Seasoned for dimensional stability. Integrated V guide ways ground to finest accuracy. Micrometer least count - 0.0002 mm or 0.001 / 0.002 / 0.005 with non rotary spindle. Micrometer & fiducial have 8 mm dia spindle. Instrument accuracy maintained in accordance with NPL UK specifications The instrument is very useful for thread plug gauge manufacturers, gauge calibration laboratories, established under NABL accreditation and in standard room where inhouse gauge calibration is carried out. Standard Accessories Male and Female centers, Micrometer 0 - 25 mm (non rotary spindle), least count 0.0002 or 0.001 Sensitive Fiducial Indicator ( 375X ) NPL UK Design Patent No. 541308 or Dial Type Indicator (Optional) Set of required Allen - Keys / Other Tools. Odd Flute Attachment Hook and Pillars for Holding Measuring wires Packed in wooden box.

Model-DGCH - 25
It's universal design enables it to calibrate both plunger and lever DTI's (Dial Test Indicators). It can also be used for calibration of bore gauges. The unit also determines gauge hyteresis which is not possible using conventional gauge blocks. This dial gauge calibrator can be used in calibration laboratories and also be used for roaming shop floor gauge calibration checks as it is a portable device. The test is performed by comparison with the master gauge. The calibrator uses the Abbe's principle.

SPECIFICATIONS :25 mm travel covering the majority of common indicators Accepts lever indicators with stylus up to 40 mm long Computer interface for efficient calibration reports. Plunger dials with 8mm or 3/8 shank can be tested. Bore gauges up to 150 mm can be checked. The standard Kit incorporates, Cary case ModelDGC-25 calibrator Master gauge (Baker Electronic Dial Gauge ED1) RS 232 cable to transfer output to computer with software Magnifying glass 3/8 to 8 mm stem mounting sleeve. Bore Gauge holding bracket and extension rod. For more details and enquiry please contact.

Range 2-25mm
It's unique design enables to Grind small punches on a Surface Grinder. Most Suitable for Press Shops where slight modifications to available punches can be carried out in the shop.

This type of coupling are maintenance-free and therefore economical for the user. Only very slight restoring forces occur during all types of misalignments. Applications: Encoder, resolver, servo motors, machine tool, robot, packing machine, testing equipment, printing press and common mechanical engineering. Micron has wide range of shaft coupling products, which are suitable for particular motion control applications. Micron shaft couplings can handle big range torque, 0.10Nm up to 60Nm. Bore holes are equipped with fitting in accordance to ISO-H7. Several helical cuts are machined into one piece of material, thereby generating flexible properties which compensate for angular, parallel and axial misalignments.

Disk-Type Couplings have a set of Steel disks. Disks and hubs are precision riveted with spacers making it one piece. Disk type couplings are available in three models, Light duty, Medium duty and Heavy duty Servo or Motor Couplings, Heavy duty Couplings having similar design as stated above. Main change is in disk, i.e. in place of single disk these have multiple disk depending on the torque rating. In case the actual torque requirement is more then in case of nut & blot assembly additional disks can be added to suit torque. These couplings can be supplied in steel hubs and Aluminum hubs with AS or AF clamping, with or without keyway, as per customer's need.

Effective Diameter Measuring Micrometer is also commonly known asFCMor Floating Carriage Micrometer. This instrument is used for accurate measurement of 'Thread Plug Gauges'. Gauge dimensions such as Outside diameter, Pitch diameter, and Root diameter are measured with the help of this instrument. All these dimensions have a vital role in the thread plug gauges, since the accuracy and interchangeability of the component depends on the gauges used. To reduce the effect of slight errors in the micrometer screws and measuring faces, this micrometer is basically used as comparator.

It is a uniq design for checking Dial gauges having least count 0.01mm and 0.001mm this is aReal 2 in 1calibration tester, since both 0.01 & 0.001 dials can be tested in one cablibration tester. This tester is used in calibration laboratories for checking plunger dials, Lever type dials, bore gaugesAll these instruments have a vital role in the production shop, since quality of the product is directly dependent on the instruments used. The micrometer has a direct reading of 0.002mm and the least count of 0.0002mm on vernier scale having widly spaced lines making it quickly readable

Micron" Green sorce Monochromativ Light Unit is an "Echo Friendly" constant frequency light sorce to check Flatness.Normally yellow orange light from a sodium vapour lamp light sorce is used to check the flatness. The work experience shows this light takes much time to get constant light and working in this light sorse id tiresome to eyes. We have developed a green monochrometic light which have a power saving light sorce and ir ready instantantly when swithc on. The fringes in green monochromatic gives no fatiuge to eyes. Flatness calculations and checking is same.

These are used with monochromatic light unit for checking the flatness. Avalable sizes: 25mm 50mm and 100mm having lambda/4 to lambda/6 accuracy.(Checked with master with lambda/20 accuracy flat)

These are used as comparator samples having different patterns of flatness such as Optical Flat, Convex, Concave etc and mainly required for technical institutes and colleges and are used with monochromatic light unit. measuring faces, this micrometer is basically used as comparator.

Comparator Stands of different types and sizes, Punch Grinder Attachment for Small punches grinding on surface grinding.