Our Product / Services
Our product range contains a wide range of Cylinder pressure regulators, Industrial oxygen regulator, Plasma Automation Solutions, High Vacuum and HOUSE SINGLE PROPANE
Based on experience from more than 2, 000 individual welding installations, we can provide straightforward and reliable standard solutions for PLASMA process; ready for integration with new as well as old robots and automated devices. Interdependent peripheral equipment for Migatronic robotic and automated solutions makes the technical integration uncomplicated.
Designed primarily for welding applications where capture at source is not sufficient. Optimized to achieve highest possible capture rates where single or multiple units are used to achieve very low levels of particle concentration.
The fume eliminator 840/841 is a small, lightweight, portable extraction unit designed to be carried to the working area. Connected to a welding torch or to an extraction nozzle,
Blasting is the simplest and most effective way to remove rust, old paint and other materials from various surfaces. The Nederman vacuum blaster is a clean
High quality, functional and easy to use hose reel for industrial use or for DIY workshops. Robust design in high-impact composite ma-terials.
Inner tube: Synthetic rubber resistant to the welding gasesReinforcement: High tensile synthetic textile.External cover: Red synthetic rubber resistant to abrasion and weatherTemperature: -20C / +60CSafety factor: 3 : 1Marking: In compliance with the below mentioned standard.Working pressure: 20 barBursting pressure: 60 bar
Inner tube: Synthetic rubber resistant to LPG and Propane/Butane gasesReinforcement: High tensile synthetic textileExternal cover: Orange synthetic rubber resistant to abrasion and weatherTemperature: -20C / +60CSafety factor: 3 : 1Marking: In compliance with the below mentioned standard.Working pressure: 20 barBursting pressure: 60 bar
Inner tube:Synthetic rubber resistant to the welding gasesReinforcement: High tensile synthetic textile.External cover:Blue synthetic rubber resistant to abrasion and weatherNON RETURN VALVE in the outletTemperature: -20C / +60CSafety factor: 3 : 1Marking:In compliance with the below mentioned standard.Working pressure: 20 barBursting pressure: 60 barStandards: ISO 3821 (hose) EN 1256 (hose assembly)
Inner tube: Synthetic rubber resistant to the welding gasesReinforcement:High tensile synthetic textile.External cover: Red synthetic rubber resistant to abrasion and weatherNON RETURN VALVE in the outletTemperature: -20C / +60CSafety factor: 3 : 1Marking:In compliance with the below mentioned standard.Working pressure: 20 barBursting pressure: 60 barStandards: ISO 3821 (hose) EN 1256 (hose assembly)
Inner tube: Synthetic rubber resistant to LPG and Propane/Butane gasesReinforcement: High tensile synthetic textileExternal cover: Orange synthetic rubber resistant to abrasion and weatherTemperature: -30 C / +70 CSafety factor: 3 : 1Marking: In compliance with the below mentioned standardsWorking pressure: 30 barBursting pressure: 75 barStandards: EN 16436-1 (hose) EN 1256 (hose assembly)Standard EN 16436-1 replaces DIN 4815-1, during 2015
Inner tube: Synthetic rubber resistant to the welding gasesReinforcement: High tensile synthetic textileExternal cover: Blue/Red synthetic rubber resistant to abrasion and weatherNON RETURN VALVE in the outletTemperature: -20C / +60CMarking: In compliance with the below mentioned standardWorking pressure: 20 barBursting pressure: 60 barIn compliance with EN 1256 (hose assembly), ISO 3821 (hose)
Inner tube: Synthetic rubber resistant to the welding gasesReinforcement: High tensile synthetic textile.External cover: Blue/Red synthetic rubber resistant to abrasion and weatherWith terminal clampTemperature: -20C / +60CMarking: In compliance with the below mentioned standardsWorking pressure: 20 barBursting pressure: 60 barIn compliance with EN 1256 (hose assembly), ISO 3821 (hose)
SAFE-GUARD - 5 / 5 FUNCTION FLASHBACK ARRESTOR
FEATURESMaximum number of safety features defined by EN730-1High visibility trip/reset lever coupled with quick acting reset even when pressurisedAngled inlet to minimise hose damage100% production flame tested for Flashback resistanceInspection dates can be marked on product for easy reference FUNCTIONSFlame arresting element FANon return valve NVPressure sensitive cut off valve PVTemperature sensitive cut off valve TVReset mechanism to clearly advise unit activation RM
FEATURESMaximum number of safety features defined by EN730-1High visibility trip/reset lever coupled with quick acting reset even when pressurisedAngled inlet to minimise hose damage100% production flame tested for Flashback resistanceInspection dates can be marked on product for easy reference FUNCTIONSFlame arresting element FANon return valve NVPressure sensitive cut off valve PVTemperature sensitive cut off valve TVReset mechanism to clearly advise unit activation RM
Safe Guard 2 / mv93 - 2 Function Flashback Arrestors
FOUR MODELS ARE AVAILABLE FOR CONNECTION TO:Regulator (model RP)Hose line to Hose line (model TT)Torch to hose line (model TF)Torch threaded inlet/outlet (model FF)
Max service pressure is 16 bar within a temperature range of -30C to +50C. The design is compact, not bigger than an ordinary hose nipple. Still the pressure losses involved are insigni cant and the set working pressure therefore stay unchanged. GCE SAFE GUARD 1 / BV 12 is manufactured in accordance with European standard EN730-2.
FOUR MODELS ARE AVAILABLE FOR CONNECTION TO:Regulator (model RP)Hose line to Hose line (model TT)Torch to hose line (model TF)Torch threaded inlet/outlet (model FF)
Safe Guard 3 hf / gva 90 - 3 Function Flashback Arrestor
FA Sintered flame arresting elementNV Non return valve to prevent reverse flow of gasesTV Thermal trip device, activated by heat to permanently cut off the gas supply
AdvantagesFlexible supply hoseBend protection at the torch and plug viewGas nozzle with rugged trapezoidal threadOptimum gas coverage by recessed contact tipGas reduction by laminar gas flow and design of the tip adapterNo gas loss due to separate shield gas feed
AdvantagesTorch heads can be changed quickly360 revolving torch headsFlexible supply hoseBend protection at the plug viewGas nozzle with rugged trapezoidal threadOptimum gas coverage by recessed contact tipGas reduction by laminar gas flow and design of the tip adapterNo gas loss due to separate shield gas feed
AdvantagesTorch heads can be changed quickly360 revolving torch headsFlexible supply hoseBend protection at the plug viewGas nozzle with rugged trapezoidal threadOptimum gas coverage by recessed contact tipGas reduction by laminar gas flow and design of the tip adapterNo gas loss due to separate shield gas feed
AdvantagesFlexible supply hoseBend protection at the torch and plug viewGas nozzle with rugged trapezoidal threadOptimum gas coverage by recessed contact tipGas reduction by laminar gas flow and design of the tip adapterNo gas loss due to separate shield gas feed
AdvantagesNew revolutionary cooling systemintelligent selection of materialsAbsolute dimensional stabilityPerformance-optimised wear parts
AdvantagesEfficient dual-circuit coolingoutstanding parts accessibilityDurable and high-precisionHigh-performance 100% duty cycle
Torch Head, Torch Brackets, Shock Sensor
AdvantagesSetting of the tungsten electrode outside the production cyclesQuick replacement of wear parts
AdvantagesPrecise cold wire feeder for the TETZ 400 (L) or TAZ 400 torch headsModular designFlexibly expandable
AdvantagesSecure connectionHigh current-carrying capacityMinimal wearSeries cross-compatibility
AdvantagesSecure connectionHigh current-carrying capacityMinimal wearSeries cross-compatibility
AdvantagesSecure connectionHigh current-carrying capacityMinimal wearSeries cross-compatibility
AdvantagesSecure connectionHigh current-carrying capacityMinimal wearSeries cross-compatibility
AdvantagesSecure connectionHigh current-carrying capacityMinimal wearSeries cross-compatibility
AdvantagesSecure connectionHigh current-carrying capacityMinimal wearSeries cross-compatibility
Filter Cart Mobile Extraction / Filter Units
The FilterCart W3 mobile filter unit for extraction applications in light production facilities is very advanced, with every conceivable function. This includes a warning signal when the filter is full. The W3 model meets the legal requirements for W3 in BGIA. The specially designed metal hood with integrated spotlight provides maximum air speed at the weld point.
Manual filter cleaning with hand crank. For simple welding and dust applications not requiring automation. N.B. When connected to a fan, a separate starter is needed.
| PW13 | 65 | 12600163 |
| PW 13 (white) | 65 | 12606263 |
Semi-automated filter cleaning with manual start-up. Can be combined with compressed air cleaning. For welding and dust applications.
| Filter Cartridge | Filter Cleaning | Voltage, V | Phases* | Weight, kg | Part no. |
|---|---|---|---|---|---|
| No filter | Motor | 400 | 3 | 65 | 12630463 |
| PW 13 | Motor | 110 | 1 | 65 | 12631063 |
| PW 13 | Motor | 230 | 1 | 65 | 12631163 |
| PW 13 | Motor | 230 | 3 | 65 | 12631363 |
| PW 13 | Motor | 400 | 3 | 65 | 12631463 |
| PW 13 | Motor + Compresse air | 230 | 1 | 65 | 12632163 |
| PW 13 | Motor + Compresse air | 400 | 3 | 65 | 12632463 |
| PWHE 15 | Motor + Compresse air | 400 | 3 | 65 | 12635463 |
The FilterBox unit is also available in white for applications in the food and chemical industries.
| Filter Cartridge | Filter Cleaning | Voltage, V | Phases* | Weight, kg | Part no. |
|---|---|---|---|---|---|
| PW 13 | Motor | 230 | 3 | 65 | 12630463 |
| PW 13 | Motor | 230 | 3 | 65 | 12631063 |
| PW 13 | Motor | 400 | 3 | 65 | 12631163 |
| PWA HE15 (antistatic) | Motor | 400 | 3 | 65 | 12637463 |
The unit consists of a separate filter cartridge and a N3 fan. It is designed for extraction and filtration of fumes and vapours emitted when soldering, gluing or working with solvents. For use in different combinations with the FX arms
Easy to install.The standard filter cartridge consists of particle, HEPA and gas filters.The gas filter cartridge is a pure carbon filter.The filter cartridges are disposable and easy to change.
The Nederman extension arm, 4.2 m or 6.0 m, is designed to be used when extra reach is needed. Combine it with fume or dust extraction arms, or exhaust extraction equipment for cars or trucks. Made of robust steel profiles. Suspended by a pivoting wall bracket and equipped with a joint in the middle, which makes it flexible in all directions. It is possible to add other equipment to the extension arm, such as welding machines, and hose and cable reels. Robust swivel, which allows the product to rotate 360o.Support mechanism of the arms is a capsulated which protects against dirt.Can be mounted in combination with different brackets, extension arms or on rail systems.Equipped with a damper in the hood as standard.The hose is easy to remove for cleaning.Minimized pressure drop and a low noise level.
The Nederman fume extractor trolley with extractor arm, is intended to be used in combination with the rail Nederman ALU 150 when extraction from long working areas is required. One extraction arm can serve several work places.The trolley is easily moved along the rail.The trolley fits Nederman extraction arms shown below.
Industrial welding and grinding table for extracting fumes, dust and particles from welding and grinding operations. It can also be used in explosive environments, if earthed accordingly. The table is not suitable for cutting. The table can be used to suspend the welding torch when not in use. Underne-ath the working area a dust drawer takes care of the heavy dust. The drawer can easily be emptied from the front of the table. The duct connection for the external fan is located on top of the table and it is recommendable to use a filter device between the table and the fan. Easy to install.Sturdy industrial design.Flexible in terms of installation possibilities.Flexible extraction capacity.Maintenance friendly
E-PAK is intended for extracting welding fumes, grinding dust, swarf, composite material, dust and particles. E-PAK can also be used as a central extraction unit and cleaning system for workstations and machines. Suitable for one to six simultaneous users depending on the application. Contact Nederman for information about our E-PAK that is suitable for explosive dust.
RBU units are used for cleaning, swarf removal, grinding, sanding, welding and in installations where extra extraction power is needed e.g. heavy material or long piping systems. Powerful vacuum units with V-belt driven roots pump. Equipped with accoustic enclosure. As standard supplied with vacuum and discharge silencers, universal valve including vacuum regulator, safety valve and back flush valve. Inlet 0 200 mm. Discharge 0 200 mm.
The crusher is fed with chips in the inlet box. The chips are then dragged into the screw, where they are partly broken against the longitudinal "break edge". When the chips are fed into the inlet they are forced against a rotating "cutting tool" which cuts them up against a fixed tool. Low wear due to low crushing speeds ./ and few moving parts.Rejects bar ends in separate outlet (optional).Very low energy consumption and low maintenance costs.Easy replaceable cutting tools with reversible edges.
The crushers can accept large quantities and then reduce the swarf to an even flow of chips. This makes the crushers ideal for installation in a swarf handling system. The crusher is used in industries where the amount of swarf is an issue and before long swarf should be extracted, centrifuged or briquetted. An integrated bar end rejecter ensures high functionality and efficiency of the system. Very low operating costs. Versatile loading. Low noise level. Carbon steel. Stainless steel. Other alloyed steel with tensile strength up to 1200 N/mm2 or higher. Aluminium alloys. Sponge iron. Titanium.
Very compact and robust with a minimum of floor space requirement. The blowing action eliminates the need for an output chip conveyor. The chips are continuously removed from the machining area keeping the working area clean. Ideal for high speed chip removal at machining centres and similar high productive machines. The compact and solid design in combination with vibrations mounts, makes the wringer silent in operation.
Highest G-force of the existing chip Ni centrifuges on the market and, consequently, also highest separation of coolant and chips. The horizontal design will mean low operation and maintenance costs. All the components are easily accessible. Cleaning of the drum will take about 5-6 minutes, compared with other centrifuges, about 3-4 hours. Automatic emptying of the centrifuge after each working cycle allows easy cleaning and multiple materials to be processed in batch.
Tramp oil separator HM For separating tramp oils from coolants The Nederman tramp oil Separators have been designed to both effectively and economically remove harmful tramp oils resulting in both the extension of the fluid life and a reduction in the problems normally associated with tramp oil contamination. Prolongs useful life of machining V and washing fluids.Greatly reduces hazardous waste.Operates in a wide temperature range.
