Our Products
Oscilloscopes
2 Products availableGenerators
1 Products availableAnemometer
1 Products availableMeasurement Gauges & Fittings
1 Products availableElectrical & Electronic Testing Devices
1 Products availableMultimeter
1 Products availableTachometers
1 Products availableWe offer the best product range of Digital Insulation Tester, DIGITAL SURFACE ROUGHNESS TESTER, Digital Earth Resistance Tester and Digital Insulation Resistance Tester.
Specifications
MODEL | DIT-5100 | |
Testing Voltage | 100/250/500V | 1000/2500/5000V |
Insulation Resistance | 0.1~20GΩ ±(3%+5) | 0.1~200GΩ ±(5%+10) |
Resolution | 0.01MΩ | |
Auto Range | yes | |
Function Symbol Display | yes | |
Data Hold | yes | |
Low Battery Warning | yes | |
Max. Diplay | 1999 | |
LCD Backglight | yes |
General Characteristics
Power | AA1.5V*8 |
Product Size | 190*155*75 mm |
Product Net Weight | 900g |
Standard Accessories | Insulation Test Lead, Carry case |
Standard individual packing | Carry case |
Digital Surface Roughness Tester is compatible with four standards of ISO, DIN, ANSI and JIS and is widely used in production site to measure surface roughness of various machinery-processed parts, calculate corresponding parameters according to selected measuring conditions and clearly display all measurement parameters.
FEATURESThis instrument is compatible with four standards of ISO, DIN, ANSI and JIS and is widely used in production site to measure surface roughness of various machinery-processed parts, calculate corresponding parameters according to selected measuring conditions and clearly display all measurement parameters.When measuring the roughness of a surface, the sensor is placed on the surface and then uniformly slides along the surface by driving the mechanisminside the tester. The sensor gets the surface roughness by the sharp built-in probe. This roughness causes displacement of the probe which results in change of inductive amount of induction coils so as to generate analogue signal, which is in proportion to the surface roughness at output end of phase-sensitive rectifier. The exclusive DSP processes and calculates and then outputs the measurement results on LCD. * Very easy to operate * Multiple parameter measurement: Ra, Rz * Highly sophisticated inductance sensor * Built-in lithium ion rechargeable battery and control circuit with high capacity * Small in size, light in weight and easy to use * Can communicate with PC computer for statistics, printing and analysing by the optional cable and the software for RS232C interface. *Manual or automatic shut down. The tester can be switched off by pressing the Power key at any time. On the other hand, the tester will power itself off about 5 minutes after the last key operation. SPECIFICATIONS:-
Display 4 digits, 10 mm LCD, with blue backlight Parameters: Ra, Rz Display Range: Ra: 0.05-10.00um/1.000-400.0uinch Rz: 0.020-100.0um/0.780-4000uinch Accuracy: Not more than 10% Fluctuation of display value: Not more than 6% Sensor : Test Principle: Inductance type Radius of Probe Pin: 10um Material of Probe Pin: Diamond Measurement Force of Probe: 16mN(1.6gf) Probe Angle: 90 Vertical Radius of Guiding Head: 48mm Driving speed: sampling length = 0.25mm Vt=0.135mm/s sampling length = 0.8mm Vt=0.5mm/s sampling length = 2.5mm Vt=1mm/s returning Vt=1mm/s Resolution : 0.001m if reading 10m 0.01m if 10mreading100m 0.1m if reading 100m Power Li-ion battery: rechargeable Operating conditions: Temp. 0-50 Humidity View Complete Details Digital Earth Resistance Tester
We are the leading exporter and supplier of this products.
Digital Insulation Resistance Tester
Three test voltages, measure insulation resistance 3 Digits Jumbo LCD display with unit annunciator & backlit, max reading 3999. General Specifications:-
Technical Specifications:-
Short circuit output: ≥ 15mA Measuring time: 1/2/10 min selectable Tell Us What are you looking for? Will call you back
Contact Us
|