Mewar Iron Works

Madri, Udaipur, Rajasthan

Derrick Crane is a combination of the Derrick and the Crane, capable for hoisting and swinging the load horizontally. Hydraulic Derrick Crane are the most suitable Cranes for mining and stone work industries.Welded L-iron used for making column, arm and rafterHinge attachment on upper part column for the rafters and multiple tackle supporting the armThe bottom of the column is joined to the winch the pivot fitted to this rotates on a special thrust bearing.The arm and hook can be raised or lowered simultaneously or independentlyElectro hydraulic provided brakes.Swivel steel pulleys on sealed roller bearing with ground steel pins.Block with steel pulleys and single or double hook (with anchor) rotating on a thrust bearing.A winch unit electric motors drive the gear speed reducers. These are case hardened, tempered and rotated in an oil bath

Capacity up to 50 Tones for Handling Blocks At processing UnitThe Industrial Gantry Crane, is just like a bridge crane, has a bridge supported by vertical structures that move along tracks. Gantries are used in stone, marble, granite processing industrie and shipyards.

It is a box like constructed structure, connected with bridge trolley that moves by motors connected to speed reducers. The Industrial Overhead Crane's structure is competently designed & strengthen by tough & stiff ribs. Placement of Crab Carriage is in the steel section consisting of special high duty motors paired with speed reducers & attached to a steel drum.
To control the smooth lifting of weight best quality Electromagnetic Brakes are attached. These industrial overhead cranes are forked revolving hooks made up of forged steel in the Block. The wire rope used is of Usha Martin make ( 6 x 37) construction. The independent Push button Control Unit controls the entire electric operation. Accident free cross & lifting operation is ensured by the Limit Switches.

• Welded L-iron used for making column, arm and rafter
• Hinge attachment on upper part column for the rafters and multiple tackle supporting the arm
• The bottom of the column is joined to the winch the pivot fitted to this rotates on a special thrust bearing.
• The arm and hook can be raised or lowered simultaneously or independently
• Electro hydraulic provided brakes.
• Swivel steel pulleys on sealed roller bearing with ground steel pins.
• Block with steel pulleys and single or double hook (with anchor) rotating on a thrust bearing.
• A winch unit electric motors drive the gear speed reducers. These are case hardened, tempered and rotated in an oil bath.

Jib cranes consist of a horizontal beam called "Jib" upon which ahoist is Placed. These hydraulic jib cranes may mounted either inside the side of awall, or upright in a floor or a foundation.div>

• Jib Type Crane 15 Tone Capacity Gadam made of M.S Gurder 10" x 5" fitted M.S. Gear and C.I Padestal and support made of M.S. Channel or gurder fitted with pattley and Jib made of M.S. Gurder 8"x 4" upto 32' length fitted with Pattley complete crane without wire rope.
• Jib Type Crane 20 Ton Capacity Gadam made of M.S. Gurder 12"x 5 " fitted with M.S. Gear and C.I Pulleys and support made of M.S. Gurder fitted pattley and Jib made of M.S Gurder 10" x 5" -32" length fitted with pulley complete crane without wore rope.
• Jib Type Crane 30 Ton Capacity Gadam made of M.S. Gurder 14" x 5 " fitted with M.S. Gear and C.I. Pulleys and support made of M.S. Double Gurder 12"x 5" fitted pattley and Jib made of M.S. Gurder 12" x 5"-40' length fitted with pulley complete crane with Base Plate & Foundation bolts without wore rope.
• Jib Type Crane 35 Ton Capacity Gadam 20' height Joist 400 mm and shaft 5" square with C.I Rope drum and M.S Gear 60" x 5", full plate type with all accessories comp. Fitting with I" dia bolts & nuts. Supports made by Double M.S Joist 300 mm with M.S angle 75x6 mm complete welded and fitted with pattley 75 mm x 250 mm & 75 mm x 225 m with I" dia bolts & nuts complete with foundation bolts, Jib made of M.S joist 350 mm with 75 x 6 mm M.S angle complete welded plates fitted by 1" dia bolts & nuts and M.S coupling welded for fitting of pulleys & Pins and Bas Plate fitted with pine 142 dia complete with foundation bolts.
• Engine air cooled Fueld Marshal Differencal (TATA) Old Gear Complete unit fitted on the Channel Frame All Respect.

Derrick Crane is a combination of the Derrick and the Crane, capable for hoisting and swinging the load horizontally. Hydraulic Derrick Crane are the most suitable Cranes for mining and stone work industries.Welded L-iron used for making column, arm and rafterHinge attachment on upper part column for the rafters and multiple tackle supporting the armThe bottom of the column is joined to the winch the pivot fitted to this rotates on a special thrust bearing.The arm and hook can be raised or lowered simultaneously or independentlyElectro hydraulic provided brakes.Swivel steel pulleys on sealed roller bearing with ground steel pins.Block with steel pulleys and single or double hook (with anchor) rotating on a thrust bearing.A winch unit electric motors drive the gear speed reducers. These are case hardened, tempered and rotated in an oil bath. derrick cranes manufacturers, jib cranes manufacturersderrick cranes manufacturers, jib cranes manufacturers