Metters Private Limited

Spencer Road, Bangalore, Karnataka

PET bottle manufacturing, Bottle filling, Injection molding machines, Textile/Spinning and weaving, Tool room, Drilling, Paper Etc.

FIAC offer various models and capacities from 5.5.HP to 100 HP. These have an FAD delivery ranging from 410 lpm (14.5 cfm) to 12600 lpm (445 cfm).

Lubricating product range

FIAC have introduced a range of products for lubrication and such applications including for automotive industry.

Lubricating product range

FIAC offer a wide range of accessories as well as spare parts for their Pumps and compressors.

FLEXBALL ITALIANA s.r.l, Italy design, engineer and manufacture "Flexball" ball bearing controls since 1960, wire cables since 1970 as well as Control Lever Boxes, Foot Pedals and other products for many different kind of applications for various industries in Italy, Europe and other countries in the world.

The main business areas are:

• construction machinery
• railways, metro, tramways, marine and transportation in general
• agricultural machinery
• professional and pleasure boats
• motor vehicle industry

Flexball manufacture controls, both mechanical and electronic, for all applications which need the transfer of a motion either linear or rotary.

All design and development is carried out with Solidworks, 2D and 3D Mechanical CADs, in order to accomplish the following tasks:

• development of a product concept
• perform fully associated top-down and bottom-up design
• weight analysis
• animations to analyse how the product will work
• carry out of prototype design and industrialization

Flexball have the full capability to design, test and qualify all its equipment. Specific tests like endurance, friction, vibration, sand, dust or salt spray are carried on the products before their final release.

All the critical parts of their controls are produced internally. Three assembly lines and two manufacturing workshops permit full quality control during all the production processes and detailed information of each component produced. This kind of organisation is essential to fulfil the On Time Delivery and Quality requirements requested by their customers.

Flexball Italiana can offer the widest range of controls available in the market covering all types of product and application: light and heavy-duty control cables, throttle cables, pull cables, brake cables, throttle lever controls, heavy-duty control levers for gearboxes, gear shifters and hydrostatic pumps, joysticks for hydraulic valve and Equipments, multifunctional handles and throttle pedals.

The Flexball cable, is an extremely flexible and sliding cable. It is very reliable and of robust construction which guarantees very high performances. If mounted properly, it will last for ever

In the last 20 years Electronic Throttle Pedals have been developed and offered to producers of Agriculture Machinery, Construction Equipment Machinery, Moving Cranes, Trucks, Defence and Special Vehicles. Flexballs Electronic Pedals can interface with all brands and types of electronic engines available on the market.

Made of nylon reinforced with 20% Fibreglass, the Pedal 1200 series is very robust and reliable, therefore it can be mounted also on heavy duty construction machines or military vehicles.

Environmental contamination is minimized due to the joint combination of the gasket with the mounting flange which segregate the cabin from the engine area

Empire Motor Co., Ltd. was established over 100 years ago, in 1913, in Nihonbashi-ku, Tokyo City (today, chuo-ku, Tokyo). They have been stocking and selling automobiles and automotive parts and accessories as well as offering genuine parts for Komatsu Construction and mining machinery. Constantly changing to meet the market needs, EMC have become an industry leader with a global market footprint and are continuously widening their product range and innovating.

Their product range includes Auto Parts, Automobile Parts, Automotive Accessories, Brake Pedal, Clutch Parts, Motor Vehicle Parts, Motor Vehicle Tools, Engine Parts, Diesel Engines, and Used Engine Parts.

Their main lines handled include Engine Parts, Chassis parts, Electrical parts, Tuning parts and Construction Machinery parts for which some of the make that they offer include such as::

Instantaneous search for applicable parts from among an enormous list of parts

The global perspective of Empire Motor has led to building an advanced part search system that can handle the enormous quantity of parts available in Japan and overseas.

Empire Motor developed a part search system to resolve this problem. This is a revolutionary system that can instantaneously search for applicable parts (product numbers), just by inputting the model designation and grade classification numbers.

Distribution system connected on-line will produce even further growth.

Empire Motor have also developed distributions centres across the world in order to give greater reach and support to customers.

These are used in Automobile Service stations, Car manufacturers, Tyre inflating, automated painting, Industrial applications, Chemical industry, Interior decoration, packaging industry etc.

The product range available is from 0.65 HP up to 10 HP. These have an air delivery ranging from 99 lpm (3.5 cfm) to 912 lpm (32 cfm)

Upto 3 HP, they are available as direct driven pumps and beyond that, as belt driven pumps.

Next Hydraulics srl, Italy was set up in 1989. The two founding shareholders who still manage the company, broke the typical clich of former employees who become self-employed to manufacture, in competition, the same products made by the companies they used to work for. Instead, using their long experience in the field of hydraulics and lifting equipment, they chose to design, develop and manufacture new products not yet available in the market and for which they perceived a growing demand.

This led to the establishment of the MAXISTAB range supplementary outriggers, and subsequently, the MAXILIFT range of telescopic cranes, which became and still remains the global benchmark in their respective fields.

In 1996, Next Hydraulics began the production of COBRA service cranes, designed for North America and Asia-Pacific markets, standing out above the existing products thanks to its several technical and manufacturing innovations.

Next Hydraulics moved to its present modern premises in 1999, located in Boretto, close to Reggio Emilia.

In June 2013 Next Hydraulics obtained AEO certificate Customs simplifications issued by the Italian Customs Authority and valid throughout the Community. The AEO status is recognised after the Customs Authority has verified that customs obligations are fulfilled, accounting criteria met, financial solvency granted. By achieving this important result, Next Hydraulics confirms the commitment to ensure its customers a high level of service, providing additional motivation to count us in the list of reliable suppliers.

The company has achieved and maintained the ISO 9001 certification since 1995, with TUV-CERT.

PIUSI Spa, Italy - Fluid Handling Products :

Established in 1953 as a pump manufacturer, Piusi's aim has been to offer solutions and not simply a product thereby stimulating research and design in specific fields such as :

• fuel transfer and measurement (FUEL)
• lubricant transfer and measurement (OIL)
• pumps and compressors for agriculture (PTO)

The company's constant growth in all the international markets is the result of a few simple guidelines:

• Dependable easy-to-use products
• Innovative solutions combining high performance, long life and low cost
• Attention to market demands and requirements
• Streamlined efficient company organisation
• Reliability in any relationship.

Today, PIUSI has a 14, 000 Sq.mtrs new and modern industrial indoor facility, spread across a 30, 000 sq. mtr area.

PIUSI use a certified Quality System for control of its design and production processes, the latest production equipment, a well-stocked and efficient warehouse together with an advanced organisational system for managing all the company activities and, in particular, a team of trained qualified persons.

They are therefore organised to offer high quality products in compliance with current regulations with complete control of the production process, efficient management of relations with the company and the services supplied, quick punctual deliveries and awareness of market requirements based on a profitable and friendly partnership with its customers.

PIUSI is focused on the future and to continuous development of new improved products with special focus on the production of UREA supply products (Ad Blue, DEF, ARLA).

Fuel and Lubricant transfer and handling equipment:

For Earth Moving and Construction machinery, Lubricating stations, Automobile Service stations, Fleet Operators

Complete Range for Crankshafts 4 or 6 cylinders, for 95 to 170 Engine models. ETP offer a complete range including Engine Bearing products, Bushings and Thrust Washers for high-performance Diesel Engines.

Propellor Shafts and U Joints for Off Highway Applications

Dana Italia Spa - Spicer Italcardano Division, Italy

Europe Tractor Parts Srl, Italy manufacture and offer various Engine, Transmission parts, Pumps and other parts for Komatsu machines. They were established in 1978 and are able to offer more than 20, 000 different parts for Komatsu machines including Excavators in range of PC100 to PC650, Dozers, some Motor Graders and other machines. They believe in continuous product improvement and in enlarging their product range.

They have a modern state of the art factory equipped with CNC machines and are supported internally by their Technical Office, Heat Treatment, and updated Quality Control Departments

Since inception, ETP have built up a big experience in manufacturing technology, materials, process machining and heat treatment. Strict quality control is maintained over production. ETP believes that Quality is an integral part of the system at every step when developing production.

Complete range available for Komatsu engine models like 95, 102, 105, 108, 110, 114, 120, 125, 130, 140, 155, 170, NH220, Liners, Piston Assy, Piston Ring, Valves, Cylinder Head, Overhaul Gasket kit, Engine Bearing, Con Rod, Crankshaft and more

Liners:

ETP Liners come with Nitriding. This is an important heat treatment process that alloys nitrogen onto the surface of a metal to create a case hardened surface. They can offer Liner Kit or Engine Kit, depending on customers needs.

Pistons:

Complete range of Pistons and Piston Rings. Pistons are sold complete with pin and snap rings. Aluminium or cast iron pistons are available, depending on the specific engine they have to fit.

Valve & Guide Valve:

For all Valves and related parts, ETP use only certified Steel and materials that allow to conform to the stringent production tolerances and performances.

Connecting Rods:

ETP are in the process of developing complete range of Connecting Rods for the most common engines.

Erma RTMO were established in 1943 and are located in Modena, the heart of Italys mechanical engineering industry. They are a leader in under carriage parts market earthmoving and construction machines.

During the first 20 years the company became well known in the Italian market selling Fiat, Caterpillar and Ansaldo parts, and had its first contact with Berco. Thereafter, it took its first step in the foreign markets. In 1976 they became the Berco dealer and in 1991 purchased RTMO, ERMAs main competitor. Presently, ERMA-RTMO is known as one of BERCOs most important stockists and dealers in the world.

The Company boasts the longest experience in the industry, guarantees the highest product quality and the best customer service. They are Partners with the largest undercarriage system manufacturers in the world.

Berco - world largest iron undercarriage manufacturer.

Bridgestone - world largest rubber track manufacturer.

ERMA is also a manufacturer, in collaboration with small Asian partners, of "ET - ERMA Track" branded components, specific to a medium range of earthmoving machines.

ERMA is not only a business partner, it rests on an approach to the profession that is not only restricted to spare part offering, but also to providing solutions to the clientele's needs, aimed at efficiency and optimization of the machine performance.

ERMA selects and offers the best solutions to everyone's business.

The Products:

ERMA-RTMOs product range includes all parts manufactured by BERCO, from the smallest screw to the biggest chain, for all kind of tractors, loaders and excavators, and also a wide stock of miscellaneous spare parts for various models of agricultural and industrial vehicles of FIAT and LANDINI-MF (of which is authorized dealer), CATERPILLAR and KOMATSU. ERMA-RTMOs range includes also rubber chains BRIDGESTONE, of which they are the exclusive dealer for Italy, and AVON steel chains, rollers, idlers and sprockets for all types of mini-excavators.

ERMA-RTMO are well known all over the world for the excellent service offered to customers. They offer high quality products, prompt and exhaustive answers and qualified technical assistance. ERMA-RTMO sell to small and big retailers, trading companies as well as very well known BERCO dealers and to some selected OEMs. They carry stocks of 45000 different items for prompt deliveries within Italy and across the world.

ERMA manufacture and supply a comprehensive range of under carriage parts and spare parts for various Construction and Mining machinery

In collaboration with small Asian partners, ERMA manufacture "ET - ERMA Track" branded components, specific to a medium range of earthmoving machines.

La Leonessa Spa, Italy/ Leonessa Brevini (Yancheng) Slewing Bearings Co., Limited - Slewing Rings.ISO/TUV Certification for both Italy and China.

Slewing Rings are used in many traditional applications such as Excavators, Tower Cranes, Mobile Cranes, Rail Cranes, Ship Deck Cranes, Stackers and Reclaimers, Concrete Mixers and Pumps, Tunneling machines, access platforms, Wind and Solar Energy Mills, ecological and water treatment equipment, robots, off-shore machinery, winches and general static and mobile industrial machines and other applications. Generally speaking, they are used in any application with rotating, turning or slewing functions.

The Slewing Rings are designed to transmit and transfer axial or radial forces and tilting moments.

In most cases the bearings are assembled in compression. In situations where the bearings are fitted for a special traction application, please send us details.

The bearing races can be ground for increased precision in the rotation and lifetime,

All bearing types can be supplied with or without internal or external gear.

A wide range of products with inch moduli and threads are available, and special items can be

Trasmital Division, the Mobile Solutions Division of Bonfiglioli Riduttori Spa, Italy

The Trasmital Bonfiglioli Division caters mainly to the needs of the mobile machinery market. Their range of products includes :

Production of planetary drives at Trasmital Bonfiglioli benefits from a highly specialised and automated manufacturing plant with its output of planetary drives representing a significant share of the total production of power transmission equipment from the Bonfiglioli Group.

Single component parts are produced with modern, state-of-the-art CNC machinery. Assembling and final testing are also conducted on automated work stations providing consistently high quality standards and excellent cost effectiveness.

300 Series Multi-Purpose Planetary Gear boxes :

The 300 series planetary gear units can be driven by hydraulic motors. They can be used for both self-propelled vehicles and fixed plants where hydraulic power is used.

Their compactness combined with high transmittable power is ideal for the high specific power that can be transmitted from hydraulic units. This is an ideal choice for all severe duty applications where shock loads and impacts are high and also because they offer several options for mounting, gear layout, output shaft and motor interface.

The range covers 16 different sizes for torque of up to 450, 000 Nm. The modular construction enables a wealth of versions to be obtained both in output and input for coupling to the main makes of hydraulic motor on the market whether high-speed, low-speed or orbital.

Their compactness combined with high transmittable power is ideal for the high specific power that can be transmitted from hydraulic units. This is an ideal choice for all severe duty applications where shock loads and impacts are high and also because they offer several options for mounting, gear layout, output shaft and motor interface.

The range covers 16 different sizes for torque of up to 450, 000 Nm. The modular construction enables a wealth of versions to be obtained both in output and input for coupling to the main makes of hydraulic motor on the market whether high-speed, low-speed or orbital.

500 Series Hydraulic Drives for Truck Mixers:

Dynax Corporation, Japan - Friction Plates & Reaction Plates

Dental and Medical use, R&D labs, Food processing, Bottle filling, Chemical industry, Interior decoration, Pharmaceuticals, Gas Chromatography, Electron Microscope, CNC Machines, Gas filling, Textile/Spinning and many more.

These Pumps and Compressors are available up to 2 HP (Air delivery of 200 lpm/7 cfm) as a single unit or upto 4 HP by using 2 units. These have an air delivery ranging upto 200 lpm/7 cfm.