Metasafe Trading Corporation

Fort, Mumbai, Maharashtra

Safety Helmet ( Fibre glass / Polyethylene / H.D.P / P.V.C any) with face shield of acrylic sheet. Face Shield of various sizes viz - 6"x9", 9"x9" or 12"x9" New "Quick Lock" Face shield attachment No more drilling holes on Helmet. This Quick Lock fits to any standard helmet.

"LAPP CABLE" range of spiral cable suit the extreme flexible applications. These cable have permanently high restoring force with long service life. Spiral cable have proved thier value in all situvations where cables are exposed to serve wear under very rugged operational conditions. They are suitable for cont cable and supply cables for machinery in machine tool, machinery and process plant manufacturing industries. Also available with polyuratine outer sheet.

These cables are used where extremely high and low temperature cause Cable insulation to become brittle and flexible. These cables are essential elements in Electric Motor manufacturing , Ship building and Aircraft construction. They also become indispensable elements in Iron and Steel works and Hot rolling mills, Foundries, Cement, Coking, Glass and Ceramics factories, On Extruders in heating and lighting units, Bakery machinery, Oil Burners, Solaria & Sauna Systems. The cables are made up of fine wire strands of tinned copper wire, conductor insulation and outer sheath of silcon based special compound

These connecting and control cables are used in machines and plants for instrument engineering.These cables are universally applicable, resistant to many oils and chemicals and are highly flexible and strudy. There are a wide range of flexible cables such as colour coded, number coded, copper screened, steel wire braided, polyurathene cables, neoprene rubber cables, robotic cables, super flexible cables with minimum bending radius and all types of weather resistant cables.

The welding cable type "HOIN2-D" is specially designed for transmission of high current from the electric welding machines to the welding tool. It is suitable for use under rugged conditions and it retains it high flexiblity even when subjected to light, Ozone, Oxgen, Inert Gas, Oil, and also to effects of heat and fire, Hence it is known as 'HOFR" (Heat-oil-flame retardant), The Cable is made from super fine strands of plane copper wire, seperator of synthetic film and outer sheath of Neoprene rubber (Flame Retardant)

The Jacket is made out of natural and synthetic fibres, It amounts less wear to strokes of Abrasion and withstands at about 7 kg/cm² Working Pressure. It meets to IS:636-88 specifucations.

The single core PVC insulations stranded conductors which form the basic for most multi-core cables and lines have varied uses. They play a vital roal in installations, cable harness and a multitude of other applications in large, medium and small industries. These cables are most suitable in the power engineering sector. They comply with the relavant European Harmonisation Regulations (>2.5 mm). These wiring cables are UL and CSA approved and are used for wiring Swithch Gear cabinets (Panel Boards) and for installation in protective sheathing for mechanical engineering purposes. They are widely resistant to Acid, Alkali and fungal attack as well as to Moisture and Many Oils. These cables generally conform to IS 694/1900. The green-yellow protective conductor is available with colour branding.

The Protective conduit consists of a flexible PVC sheet with a rigid PVC spiral welded in. The inner wall is however smooth and enables cable and single wires to be pulled through easily. This all plastic protective conduit is very flexible and yet retains its shape. Applications are to be found in engineering, vehicle and automatic machine tool manufacture.

This is fully insulated spring loaded electrode holder is designed for maximum safety, comfort and high productivity. Minimum contact area of conductivity and high grip cable connection avoids heat transfer to the handle of the holder. Available in 400 and 600 amps capacity.

These easy to assemble cable glands with its many good featured is made of polyamide and is suitable for universal applications especially in Machinery and Equipment manufacture, in Automation, Electrical engineering and Robot manufacture. These Cable glands also come with reducing seal indent, which enables Leads & Cables of smaller outside diameter to be sealed.

Carbide Tipped Tools Brazed with silver on Automatic Machine and laped on Dimon Wheel. Carbide tools are available in standard sizes and shapes as per ISO : Specification - Turning, Threading, Boring, Parting Tools for various industries coverved with grade P-30, P-40, K-20 etc. We manufactured any type of carbide tipped tools as per your drawing, samples and specification. Also available bare Carbide, like Round, flat and square in any sizes finished or unfinished as per your requirement.

These hammers have a capacity of upto 14mm in concrete, 13mm in steel & 20mm in wood. This tool is also suitable for light chiseling. It has a high capacity NiCd battery pack with NTC temperature monitor for long life and can be recharged upto 1000 times. Equipped with automatic safety clutch.

Water Gel is used whereever there is a potential for fire or burns. It is available in various sizes and it comes packaged in heat-seal pouches or air-tight containers that keeps the product ready for use.

MAJOR AREAS IT IS USED :Industrial, Hospital/Medical, Military, Goverment Facilities

Crash helmet for motorcycle / scooter riders, IS:4151 marked, with or without visor. Available in various shapes and colours, Also available with Sun peak or with full face cover.

"A" Type Full face shield with plastic / Fibre Retchat head band "Darvic" Type. Rugged crown for chin and neck protection with clear side extended to give extra vision.
Protect full face against dust and flying articles. Available on clear, Blue and Green visor.

This tool reveals its strength both in tight curves and in straight cuts. The full 360 turning circle of the cutting punch and the die location provide a broad spectrum of possible applications.

This face-shields are specially designed for working near furnace. These are made from tough vulcanized heat resisting fibre with Cobalt blue visor/mica

visor for radiation and heat resistance. Avialable with or without ventilation holes

These tools are useful for drilling in concrete.
Different models with capacity of upto 24mm in concrete can be provided .

This tool is suitable for stripping old paints without creating dust, drying new coats of paint, thawing frozen water pipes, de-icing of fridges, welding plastic, repairing tents and many similar jobs. It has a automatic electronic maintenance of constant air temperature.

Angle grinders are avialable in various models ranging from 4" - 9". The fibre body of the tool makes it very light in weight so that the tool can be handled easily.

A useful tool for light grinding and cutting jobs with grinding wheel capacity of 4" or 5".Weight less than 2 kgs

Safety Helmet (Fibre glass / Polyethylene / H.D.P / P.V.C any) with Ear-Muffs. Slot provided for Ear-Muff attachment gives dual protection (Ear and Head) perfect fitting and adjustment for wearer comfort.

Industrial Safety face shields with clear acrylic visor and elastic head bands or rachet type head band in various sizes 3" x 9", 6" x 9", 9" x 9", 12" x 9". Avialable in clear Blue and Green visor.

These tools are used for cutting wood, non-ferrous metals, Steel sheets etc.
Dust removal, removable base-plate, lower guide roller, adjustable saw dust blower, and naturally 4 stage orbital

motion, electronic control systems and powerful motor are the special features.