Using premium packaging materials, we secure our products properly for transportation and label it properly to provide information such as address of manufacturer/distributors, MRP, quantity, etc. Our raw materials are essential bottleneck assets and thus these are carefully selected by our expert quality auditors after checking against varied quality parameters.

Range :

• Pointing machine
• Wire drawing machine
• Straightening and cutting machine
• Thread rolling machine
• Galvanised or zinc plant

We maintain proper schedules for the delivery of bulk or urgent consignments so as to deliver the range in set time and gain utmost customer satisfaction. The offered array of products is examined on the basis of quality of raw material and other inputs used for the manufacturing. Rest assured us for the raw material used, as we have most updated technologies to examine the quality.

Liquid Painting Plant having following items :

• Liquid Paint Tanks – 1 Nos.
• Dripping Tray - 1 no
• Oil Fired Curing oven (Straight Type) – 1 Nos.
• Overhead Motorized Conveyor, with support Structure – 1 Set.
• Electrical Control Panel – 1 Set.
• Painting, and Finishing etc. – 1 Lot.

We make sure that the packaging of products is done using qualitative material in order to deliver the products safely. Only after complete inspection, we deliver the products in the dedicated time span. We are a noteworthy name and work hard to attain complete client satisfaction. And, for achieving this objective, we facilitate them with easy payment modes.

Details :

• Features of the Multi-Spindle Drilling Machine Specially designed for Scaffolding pipes drilling operation.
• Machine will have the capacity to load 40 NB, 2000mm length pipes, for auto mode and 3000mm in semi auto mode
• Drilling Pitch will be 120mm Please note that our machine has 14 spindles fixed in particular pitch. They are not adjustable. If any change in, pitch and no of holes to be drilled, is required please specify in your enquiry.
• For Drill height adjustment-adjustable Sleeves Type Din 6327 with MT-2 Taper will be provided. (Max drill size 17.5 mm with MT2 taper shank)
• Machine will be equipped with automatic loading of the pipe from loading table to the V-Block for drilling.

• Machine will have Manual/semi-auto and Automatic Mode Selection in operation. In manual mode, individual functions of the machine can be operated manually during initial machine setup.
• After machine setup is completed, it can be run in Semi auto or Automatic-mode by selecting Semi auto or Auto Mode Automatic cycle sequence is as below :
  • Positioning of the pipe.
  • Clamping of the pipe.
  • Slide up with rapid movement till the drill point.
  • Coolant ON & Slide up with feed movement to drill the pipe on one side.

Our product is available in nontoxic and industrial-grade packaging materials that ensure the products are safe from damage and reach buyers in brand new conditions. To make our transactions secure, we allow our clients to make payment through both offline and online mediums.

Cutting : The end of the reinforcement bars is sawn square. Cold Forging : With the help of cold forging, the sawn end of the reinforcing bar is then enlarged. With this the core diameter of the bar is increased to pre-determined diameter. Threading : An ISO standard metric thread is then cut. Specialties Of Our Rebar Couplers

• Technically Perfect :Concrete structures need to be reinforced to improve their load bearing capacity and our Rebar Couplers are perfectly designed for that. Our Rebar Couplers impart unmatched mechanical strength to the RCC structures thus ensuring complete safety even in the rugged conditions of seismic activity. The continuity of our Rebar Couplers allows for grounding electrical current.
• Flawless Design :Rebar Couplers, offered by us, are exemplary for their flawless design that allows better concrete flow and consolidation while at the same time reducing rebar congestion. Such designing minimizes reinforcement fixing errors and offers greater flexibility in structuring RCC.
• Simple Installation :Simple mechanical ways are adopted for installation of Rebar Couplers. The simplicity of the installation process saves significant amount of time and labor. The benefits are immediately reflected in the reduced costs of the construction project.
• Installation Of Rebar Couplers :
  • Good quality shear cut bars with sharp perpendicular cutting or saw cutting may be used. The threading is provided on bar ends with proprietary branded threading equipment and thread cutting tools.
  • Threading of reinforcement bars must be carried out as per NCT RE-BAR COUPLERS by trained operator. The thread checking gauge is used for checking the threads. The threads shall be covered by thread protection plastic cap while storing.
  • The bent bars may be threaded on threading machine provided straight length of the bent bar-end to be threaded is more than 0.5 m. If not so, the bars may be threaded in straight lengths, connected thoroughly and bar bending is carried out subsequently. The bent must be minimum 100mm apart from thread bar end.
  • The bar is connected to coupler sleeve initially by hand tightening and then with pipe wrench.
  • The NCT RE- BAR Couplers full strength threaded butt joining that achieves strength with fully engaged threading of coupler and reinforcement bars. Therefore, it is essential to ensure adequate tightening of joining connection for effective load transfer.

Our organization assures distribution of wholesale as well as retail consignments of the goods as per the jointly decided period. After the goods are sternly examined by the experts, the picking, checking, labeling and packing commences in the substantial warehouse. Sprawling over a large area, we ensure that the goods are packed with utmost proficiency.

Features :

• User-friendly
• Precision engineered
• QC verified
• High productivity

Our organization assures distribution of wholesale as well as retail consignments of the goods as per the jointly decided period. We have massive warehouse with Individual stock keeping units (SKUs). We are capable of sorting the products in an efficient way and can easily entertain bulk requirements of the customers.

Features :

• User-friendly
• Precision engineered
• QC verified
• High productivity

Conforming to international quality management systems, our product range is of unparalleled value. We make certain that the offered array of products is sternly tested for the raw material as well. This makes our offered array of products completely reliable and genuine.

Features :

• User-friendly
• Precision engineered
• QC verified
• High productivity

Our organization is positioned at Ludhiana(India) and has gained immense acknowledgement and a respected place in the market. We have a well-developed all the in-house storage facility, laced with all the modern facilities. Also, we have hired a team of professionals who efficiently manage and maintain it.

Bed : The Bed of Pipe Beveling Machine is made of Cast Iron. It is Very Rigid and sturdy in construction so as to take maximum Load and absorb maximum vibrations. It is provided with four Nos. Foundation Holes of Dia M20 at four corners of the bed. It is also provided with Four Tapped holes of 5/8 BSW near the Foundation Holes. The Head Stock and Clamping Vice is fitted on the Bed. Head Stock : he Head Stock body of Pipe Beveling Machine is made of Cast Iron. It is Very rigid and sturdy in design. The Head Stock is designed for Four Nos. Spindle speeds. All the Gears are of helical type made out of Axle Forging. The width of gears is 50 mm. The Shifting Gears slide on Splined Shafts. The Shafts are mounted on Heavy Duty Ball Bearings. The Input Shaft will be provided with a pulley having three grooves for C-Section V-belts. The Main Spindle is mounted on two Taper Roller Bearings mounted in Hard Chrome Plated Ground Sleeve. The Sleeve along with main spindle fitted with Beveling Head is mounted in the Head Stock body and is movable To and Fro along its axis. A Hyd. Cylinder actuated electrically makes the movement of the sleeve in the Head Stock. The Movement of the Sleeve can also be made manually. The Head Stock is Oil Filled. It is provided with Oil Filling hole, Oil Drain hole and Oil Level Indicator. Clamping Vice : The Box Type Clamping Vice is fitted on the Bed. The Vice is provided with Round Clamping Jaws for each size (4, 5, 6, 7, 8, ). The Vice will be Self-centering type. The movement of the Clamping Jaws is made by Pneumatic cylinder fitted on the Vice actuated electrically. The Vice will be very rigid and sturdy in design. Machine will be supplied with single clamping vice. Beveling Head : A special Beveling Head will be provided with the machine. Two Tools of HSS will be used, One for Beveling and second for Root Face. The Beveling Tool will be mounted in a special Spring Loaded Tool Holder with a Roller device. It is fitted on the main spindle that is then mounted in the traveling Sleeve.

Our organization is endowed by a massive circulation system that allows us to reach purchasers wherever and distribute orders on schedule. Superior raw materials are essential for the development of a quality product. Thus, we obtain these materials only from the dependable sources available in the market.

Rolling Key : Is fitted in the two parts of EN-34 alloy steel duty tempered and property ground and give a perfect service. All are being taken that the key may not break and is suitable to stand the jerks. Alignment : Heighest degree of precision maintained during the fitting of ram and it's base is checked very property on 90 angel with the dail indicator. Horizontally & Perpendicularly. Body : The press bodies are manufactured out of the close grain casting and steel fabricated as well.

We do not have to worry about stock-out situations or meeting bulk requirements, as we have an equipped warehouse facility. It has the latest inventory control and management software and helps us maintain continuous product availability. We provide customized as well as standard packaging of the products. With the assistance of our streamlined packing system, we are able to provide damage-free products to the clients.

Features :

• Thread - TPI or Pitch : 1/8 in - 27 NPT, 1/4 in - 18 NPT, 3/8 in - 18 NPT, 1/2 in - 14 NPT, 3/4 in - 14 NPT, 1 in - 11 1/2 NPT

• Material : Carbon Steel, HSS

• Includes : Wooden Case, Taps, Dies

• Type : Tap & Die

Special Taps :

• Your tapping requirement may be unique for various reasons, but one common requirement in all applications is successful tapping. Some examples of why your application may be special.

• Material characteristic such as swarf type, elasticity, strength and hardness. depth of hole thread size pitch thread form reach holding.

• There are essentially four qualities in successfully designing and manufacturing a tap.

• Theoretical knowledge and practical experience are intrinsic in this process.

• Size form geometry texture or finish

• Base material, its heat treatment, and final surface coating are significant factors; but they would be irrelevant without the correct geometry. Tap geometry involves a combination of features tailored to all the above. thread and flute cutting angles, flute pattern, cutting force reduction features. The culmination of these geometrical features is the knowledge we refer to. Our knowledge combined with processes and equipment, allow consideration of all these variables.

Due to our secure and hassle-free payment procedures, clients stay satisfied with us. We undertake both online and offline payment processing methods including cash and bank transfers. Purchasers can rest secure; our entire range is premium, as they are wholesaled by us after subjecting them to a string of quality control tests.

Features :

• User-friendly
• Precision engineered
• QC verified
• High productivity

Using premium packaging materials, we secure our products properly for transportation and label it properly to provide information such as address of manufacturer/distributors, MRP, quantity, etc. Our raw materials are essential bottleneck assets and thus these are carefully selected by our expert quality auditors after checking against varied quality parameters.

Range :

• Pointing machine
• Wire drawing machine
• Straightening and cutting machine
• Thread rolling machine
• Galvanised or zinc plant

We maintain proper schedules for the delivery of bulk or urgent consignments so as to deliver the range in set time and gain utmost customer satisfaction. The offered array of products is examined on the basis of quality of raw material and other inputs used for the manufacturing. Rest assured us for the raw material used, as we have most updated technologies to examine the quality.

Liquid Painting Plant having following items :

• Liquid Paint Tanks – 1 Nos.
• Dripping Tray - 1 no
• Oil Fired Curing oven (Straight Type) – 1 Nos.
• Overhead Motorized Conveyor, with support Structure – 1 Set.
• Electrical Control Panel – 1 Set.
• Painting, and Finishing etc. – 1 Lot.

We make sure that the packaging of products is done using qualitative material in order to deliver the products safely. Only after complete inspection, we deliver the products in the dedicated time span. We are a noteworthy name and work hard to attain complete client satisfaction. And, for achieving this objective, we facilitate them with easy payment modes.

Details :

• Features of the Multi-Spindle Drilling Machine Specially designed for Scaffolding pipes drilling operation.
• Machine will have the capacity to load 40 NB, 2000mm length pipes, for auto mode and 3000mm in semi auto mode
• Drilling Pitch will be 120mm Please note that our machine has 14 spindles fixed in particular pitch. They are not adjustable. If any change in, pitch and no of holes to be drilled, is required please specify in your enquiry.
• For Drill height adjustment-adjustable Sleeves Type Din 6327 with MT-2 Taper will be provided. (Max drill size 17.5 mm with MT2 taper shank)
• Machine will be equipped with automatic loading of the pipe from loading table to the V-Block for drilling.

• Machine will have Manual/semi-auto and Automatic Mode Selection in operation. In manual mode, individual functions of the machine can be operated manually during initial machine setup.
• After machine setup is completed, it can be run in Semi auto or Automatic-mode by selecting Semi auto or Auto Mode Automatic cycle sequence is as below :
  • Positioning of the pipe.
  • Clamping of the pipe.
  • Slide up with rapid movement till the drill point.
  • Coolant ON & Slide up with feed movement to drill the pipe on one side.

Our product is available in nontoxic and industrial-grade packaging materials that ensure the products are safe from damage and reach buyers in brand new conditions. To make our transactions secure, we allow our clients to make payment through both offline and online mediums.

Cutting : The end of the reinforcement bars is sawn square. Cold Forging : With the help of cold forging, the sawn end of the reinforcing bar is then enlarged. With this the core diameter of the bar is increased to pre-determined diameter. Threading : An ISO standard metric thread is then cut. Specialties Of Our Rebar Couplers

• Technically Perfect :Concrete structures need to be reinforced to improve their load bearing capacity and our Rebar Couplers are perfectly designed for that. Our Rebar Couplers impart unmatched mechanical strength to the RCC structures thus ensuring complete safety even in the rugged conditions of seismic activity. The continuity of our Rebar Couplers allows for grounding electrical current.
• Flawless Design :Rebar Couplers, offered by us, are exemplary for their flawless design that allows better concrete flow and consolidation while at the same time reducing rebar congestion. Such designing minimizes reinforcement fixing errors and offers greater flexibility in structuring RCC.
• Simple Installation :Simple mechanical ways are adopted for installation of Rebar Couplers. The simplicity of the installation process saves significant amount of time and labor. The benefits are immediately reflected in the reduced costs of the construction project.
• Installation Of Rebar Couplers :
  • Good quality shear cut bars with sharp perpendicular cutting or saw cutting may be used. The threading is provided on bar ends with proprietary branded threading equipment and thread cutting tools.
  • Threading of reinforcement bars must be carried out as per NCT RE-BAR COUPLERS by trained operator. The thread checking gauge is used for checking the threads. The threads shall be covered by thread protection plastic cap while storing.
  • The bent bars may be threaded on threading machine provided straight length of the bent bar-end to be threaded is more than 0.5 m. If not so, the bars may be threaded in straight lengths, connected thoroughly and bar bending is carried out subsequently. The bent must be minimum 100mm apart from thread bar end.
  • The bar is connected to coupler sleeve initially by hand tightening and then with pipe wrench.
  • The NCT RE- BAR Couplers full strength threaded butt joining that achieves strength with fully engaged threading of coupler and reinforcement bars. Therefore, it is essential to ensure adequate tightening of joining connection for effective load transfer.

Our organization assures distribution of wholesale as well as retail consignments of the goods as per the jointly decided period. After the goods are sternly examined by the experts, the picking, checking, labeling and packing commences in the substantial warehouse. Sprawling over a large area, we ensure that the goods are packed with utmost proficiency.

Features :

• User-friendly
• Precision engineered
• QC verified
• High productivity

Our organization assures distribution of wholesale as well as retail consignments of the goods as per the jointly decided period. We have massive warehouse with Individual stock keeping units (SKUs). We are capable of sorting the products in an efficient way and can easily entertain bulk requirements of the customers.

Features :

• User-friendly
• Precision engineered
• QC verified
• High productivity

Conforming to international quality management systems, our product range is of unparalleled value. We make certain that the offered array of products is sternly tested for the raw material as well. This makes our offered array of products completely reliable and genuine.

Features :

• User-friendly
• Precision engineered
• QC verified
• High productivity

Our organization is positioned at Ludhiana(India) and has gained immense acknowledgement and a respected place in the market. We have a well-developed all the in-house storage facility, laced with all the modern facilities. Also, we have hired a team of professionals who efficiently manage and maintain it.

Bed : The Bed of Pipe Beveling Machine is made of Cast Iron. It is Very Rigid and sturdy in construction so as to take maximum Load and absorb maximum vibrations. It is provided with four Nos. Foundation Holes of Dia M20 at four corners of the bed. It is also provided with Four Tapped holes of 5/8 BSW near the Foundation Holes. The Head Stock and Clamping Vice is fitted on the Bed. Head Stock : he Head Stock body of Pipe Beveling Machine is made of Cast Iron. It is Very rigid and sturdy in design. The Head Stock is designed for Four Nos. Spindle speeds. All the Gears are of helical type made out of Axle Forging. The width of gears is 50 mm. The Shifting Gears slide on Splined Shafts. The Shafts are mounted on Heavy Duty Ball Bearings. The Input Shaft will be provided with a pulley having three grooves for C-Section V-belts. The Main Spindle is mounted on two Taper Roller Bearings mounted in Hard Chrome Plated Ground Sleeve. The Sleeve along with main spindle fitted with Beveling Head is mounted in the Head Stock body and is movable To and Fro along its axis. A Hyd. Cylinder actuated electrically makes the movement of the sleeve in the Head Stock. The Movement of the Sleeve can also be made manually. The Head Stock is Oil Filled. It is provided with Oil Filling hole, Oil Drain hole and Oil Level Indicator. Clamping Vice : The Box Type Clamping Vice is fitted on the Bed. The Vice is provided with Round Clamping Jaws for each size (4, 5, 6, 7, 8, ). The Vice will be Self-centering type. The movement of the Clamping Jaws is made by Pneumatic cylinder fitted on the Vice actuated electrically. The Vice will be very rigid and sturdy in design. Machine will be supplied with single clamping vice. Beveling Head : A special Beveling Head will be provided with the machine. Two Tools of HSS will be used, One for Beveling and second for Root Face. The Beveling Tool will be mounted in a special Spring Loaded Tool Holder with a Roller device. It is fitted on the main spindle that is then mounted in the traveling Sleeve.

Our organization is endowed by a massive circulation system that allows us to reach purchasers wherever and distribute orders on schedule. Superior raw materials are essential for the development of a quality product. Thus, we obtain these materials only from the dependable sources available in the market.

Rolling Key : Is fitted in the two parts of EN-34 alloy steel duty tempered and property ground and give a perfect service. All are being taken that the key may not break and is suitable to stand the jerks. Alignment : Heighest degree of precision maintained during the fitting of ram and it's base is checked very property on 90 angel with the dail indicator. Horizontally & Perpendicularly. Body : The press bodies are manufactured out of the close grain casting and steel fabricated as well.

We do not have to worry about stock-out situations or meeting bulk requirements, as we have an equipped warehouse facility. It has the latest inventory control and management software and helps us maintain continuous product availability. We provide customized as well as standard packaging of the products. With the assistance of our streamlined packing system, we are able to provide damage-free products to the clients.

Features :

• Thread - TPI or Pitch : 1/8 in - 27 NPT, 1/4 in - 18 NPT, 3/8 in - 18 NPT, 1/2 in - 14 NPT, 3/4 in - 14 NPT, 1 in - 11 1/2 NPT

• Material : Carbon Steel, HSS

• Includes : Wooden Case, Taps, Dies

• Type : Tap & Die

Special Taps :

• Your tapping requirement may be unique for various reasons, but one common requirement in all applications is successful tapping. Some examples of why your application may be special.

• Material characteristic such as swarf type, elasticity, strength and hardness. depth of hole thread size pitch thread form reach holding.

• There are essentially four qualities in successfully designing and manufacturing a tap.

• Theoretical knowledge and practical experience are intrinsic in this process.

• Size form geometry texture or finish

• Base material, its heat treatment, and final surface coating are significant factors; but they would be irrelevant without the correct geometry. Tap geometry involves a combination of features tailored to all the above. thread and flute cutting angles, flute pattern, cutting force reduction features. The culmination of these geometrical features is the knowledge we refer to. Our knowledge combined with processes and equipment, allow consideration of all these variables.

Due to our secure and hassle-free payment procedures, clients stay satisfied with us. We undertake both online and offline payment processing methods including cash and bank transfers. Purchasers can rest secure; our entire range is premium, as they are wholesaled by us after subjecting them to a string of quality control tests.

Features :

• User-friendly
• Precision engineered
• QC verified
• High productivity