STO Adjustable pallet racking is probably the most widely used type of pallet racking, and offers free access to every pallet held. It can be built to match the lift height of any fork-lift truck Stackers. It consists of upright end frames and pairs of horizontal beams on which the pallets are located, and beam heights are adjustable to suit the height of the pallet loads being stored.

In theory, to optimize the use of vertical space, beam heights can be altered if pallet load heights change. In practice, this does not often occur because of the cost and disruption to the operation. Typically, two pallets are stored per bay (ie between rack uprights). The conventional way of laying out APR is to have one row single deep against the wall at each end of the installation, with back-to-back rows in between. This gives every truck aisle access to two rows of racking, and minimizes the number of aisles required. APR is a flexible, versatile storage system, which gives excellent stock access.

In theory, to optimize the use of vertical space, beam heights can be altered if pallet load heights change. In practice, this does not often occur because of the cost and disruption to the operation. Typically, two pallets are stored per bay (ie between rack uprights). The conventional way of laying out APR is to have one row single deep against the wall at each end of the installation, with back-to-back rows in between. This gives every truck aisle access to two rows of racking, and minimizes the number of aisles required. APR is a flexible, versatile storage system, which gives excellent stock access.

Shelvingis generally made from standard modular components that allow installations of different heights, vertical shelf spacing and shelf depths. The typical standard span width is 1 Ft, 1.5 Ft2 Ft for Medium Duty & 2 Ft to 4 Ft Heavy duty. But long span shelving is also available that facilitates the holding of longer items of stock.

This is suitable for light and medium duty work. Mostly used as shelving, adjustable units can be assembled rapidly and adapted to change and expansion. Each shelf can be adjusted independently; used efficiently, this allows the storage space to be used to the full. Most adjustable shelving can be altered without tools.

Many companies buy adjustable racking and never use this potential the additional investment must be justified Load/level can be designed upto 500 Kgs for Medium duty racks & Upto 3000 Kgs for Heavy duty racks. Shelving can be accessed in various ways - from ground-floor level, from mezzanine levels (Multi Tier racking).

Slotted angle Shelving Racks are Light Duty Storage System, fabricated; thereafter the sheets are systematically tested, degreased, de-resulted and chemically treated. These are applied in departmental store shelving, multi-tiers shelving, drawer racks, tool cabinet etc.

Before meeting us and seeing our work, our customers had never experienced Slotted angle Shelving Racks of this kind, which is high in terms of workmanship, quality and reliability.

Accessories :

• These are suitable for partitions plates, cladding sheets,
• These are suitable for corner plates, nuts and bolts, plastic fleet, label holders etc.
• Ideal for Palletized and Non-Palletized Stores.

STO Adjustable pallet racking is probably the most widely used type of pallet racking, and offers free access to every pallet held. It can be built to match the lift height of any fork-lift truck Stackers. It consists of upright end frames and pairs of horizontal beams on which the pallets are located, and beam heights are adjustable to suit the height of the pallet loads being stored.

In theory, to optimize the use of vertical space, beam heights can be altered if pallet load heights change. In practice, this does not often occur because of the cost and disruption to the operation. Typically, two pallets are stored per bay (ie between rack uprights). The conventional way of laying out APR is to have one row single deep against the wall at each end of the installation, with back-to-back rows in between. This gives every truck aisle access to two rows of racking, and minimizes the number of aisles required. APR is a flexible, versatile storage system, which gives excellent stock access.

In theory, to optimize the use of vertical space, beam heights can be altered if pallet load heights change. In practice, this does not often occur because of the cost and disruption to the operation. Typically, two pallets are stored per bay (ie between rack uprights). The conventional way of laying out APR is to have one row single deep against the wall at each end of the installation, with back-to-back rows in between. This gives every truck aisle access to two rows of racking, and minimizes the number of aisles required. APR is a flexible, versatile storage system, which gives excellent stock access.

Shelvingis generally made from standard modular components that allow installations of different heights, vertical shelf spacing and shelf depths. The typical standard span width is 1 Ft, 1.5 Ft2 Ft for Medium Duty & 2 Ft to 4 Ft Heavy duty. But long span shelving is also available that facilitates the holding of longer items of stock.

This is suitable for light and medium duty work. Mostly used as shelving, adjustable units can be assembled rapidly and adapted to change and expansion. Each shelf can be adjusted independently; used efficiently, this allows the storage space to be used to the full. Most adjustable shelving can be altered without tools.

Many companies buy adjustable racking and never use this potential the additional investment must be justified Load/level can be designed upto 500 Kgs for Medium duty racks & Upto 3000 Kgs for Heavy duty racks. Shelving can be accessed in various ways - from ground-floor level, from mezzanine levels (Multi Tier racking).

Slotted angle Shelving Racks are Light Duty Storage System, fabricated; thereafter the sheets are systematically tested, degreased, de-resulted and chemically treated. These are applied in departmental store shelving, multi-tiers shelving, drawer racks, tool cabinet etc.

Before meeting us and seeing our work, our customers had never experienced Slotted angle Shelving Racks of this kind, which is high in terms of workmanship, quality and reliability.

Accessories :

• These are suitable for partitions plates, cladding sheets,
• These are suitable for corner plates, nuts and bolts, plastic fleet, label holders etc.
• Ideal for Palletized and Non-Palletized Stores.