Our Products #704309

Avail the best quality rod draw bench machine from us. Rod draw bench machine is used for straight length die-drawing of rod for producing straight lengths of shaped rods. specificationsmodel no.minimum od (mm)maximum od (mm)mrdb-15515mrdb-20820mrdb-251025mrdb-301230mrdb-351535mrdb-602060mrdb-903090mrdb-12550125

We are one of the top Rotary Swager Manufacturers, Suppliers, and Exporters. The company manufactures different kind of hydraulic-based fully automatic & manual Rotary Swaging Machines. The Rotary Swager is used for different tubes or pipes, depending on the size & design of swaged tubes. Rotary Swager follows no heating process. The Rotary Swager is known for lesser power consumption, which makes it highly suitable for industries engaged in mass production of swaged parts/ components. The machine circuit is designed as per the international standards. MechanismRotary Swaging is a process for reducing the diameter of a length of tubing. The reduced diameter can be any length, from a short end up to the entire length of the tube, or any length in between. The tubing is fed by hand, or mechanically, into custom made hardened steel dies. Through the reciprocating action of the die halves, the tube is worked into the shape cut in the dies. Features

• Externally rigid construction
• Temper-free alignment
• Excellent finishes & accuracy
• Fast set-up & change over.
• User-friendly machines
• Cost-effective process
• Increased tensile strength
• An improved surface finish
• Less material wastage
• Less time
• Better finish
• Higher strength

ApplicationsThe Rotary Swager has various applications in such manufacturing units where processes like metal forming are involved. A few of the applications as mention below :

• Compacting electrical tubular heaters to eliminate trapped air and improve life of heaters
• Pointing tubes, rods and wires prior to drawing
• Front tapering and hole closing on gas welding nozzles, spot welding tips, etc.
• Bicycle fork, seat steam, and hub manufacture
• For manufacturing thermometer refrigerator gas bottle, fire extinguisher, bulbs, etc.
• For manufacturing box and tubular spanners, gas bottle openers
• Assembly operations such as terminal swaging on cables, forming square on speedometer cables and various other operations
• Forming square shoulder flat points for screw drives files
• For manufacturing umbrella sticks, fountain pen caps, jotter refills, and similar parts
• Tapering of steel and aluminum tabular furniture legs
• Reducing the ends of automobile tie rods and other similar components

SpecificationsModel No.Min. Dia mmMax. Dia mmMax Wall ThicknessMotor CapacityMRS-8280.51.5MRS-1451413MRS-226221.55MRS-3083037.5MRS-501550410MRS-652065520MRS-803080630

We are offering tube draw bench machine.avail the best quality tube draw bench machine from us. Tube draw bench machine is used for straight length die-drawing of tube for producing straight lengths of shaped tubes. specificationsmodel no.minimum od (mm)maximum od (mm)

We offer high quality Tube Coiler Machine, having high capacity with the minimum space requirements. These Tube Coiler Machines can be provided to clients in customized sizes and specifications as per their requirements. The Coiler Machines are easy to use and the compact size enables easy transportation. The clearly structured concept of Tube Coiler Machine with integrated control unit is its highlight. Known For

• Rapid change-over
• Easy operation
• Short training period
• Simple usage

Technical Specifications

• Pancake Coil Size : From 18 to 34" Diameter Tube
• Ideal For : Hard and Soft Annealing Tube

.

We offer Bar Pointing Turning Machine in India and abroad. Our high quality Bar Pointing Machine is regarded as the most preferable among all the other brands as it is extremely efficient. The company is one of the leading Bar Pointing Machine Manufacturers, Suppliers, and Exporters. We offer Bar Pointing Machine at affordable prices. Details

• Construction of the Machine : The body & base of the machine will be of rigid casting.
• Head Stock : The machine has geared head with four speed change systems.
• Cutting Operation & Feeding : The cutting tool is mounted on a cutter head, which in turn is fixed on a revolving spindle. The bar, to be turned, is moved by slide against the revolving cutter head. During the cutting operation the feeding of the material will be automatic.
• Coolant Pump : For all the models coolant pump is used

SpecificationsModel No.Turning Dia (Max) mmChuck SizeBar Length (Max.) MeterSpindle Speed StandardPowerSpindle ToolsMBPT-4015 to 40125100 to 15o200 to 3003hp 1440rpm4 toolsMBPT-65 25 to 65150100 to 200150 to 2505hp 1440rpm4 toolsMBPT-10040 to 100225100 to 250100 to 2007.5hp 1440rpm4 toolsMBPT-125 60 to 125250100 to 200100 to 20010hp 1440rpm4 toolsMBPT-15090 to 15027575 to 150100 to 20015hp 1440rpm4 tools.

Meraj multi- cross roll tube straightening machine allows the tube to be rounded straight during straightening. The machines provide all the advantage and meet the requirement of modern industries. We offer two types of straightening machine with 6 roll and 10 roll design respectively, each of which meets a particular requirement of straightness tolerance. The 6 roll tube straightening machine caters to straightening tolerance of 1mm in 1 mtr length and the 10 roll tube straightening machine caters to straightening tolerance upto 1mm in 5 mtr lengths depending on material specifications features

• machines comprise of six / ten work rolls arranged in pairs
• rolls are quickly and easily adjusted angularly to give a perfect contact between the tubes and roll over the maximum effective roll profile
• setting of the machine for different sizes of tube is simple
• all rolls are driven by two identical electric motors
• machines are fitted with indicators for vertical and angular setting of rolls
• accuracy
• long-life straightening rolls

specificationsmodel no.capacity (od) range mmmax dia mmmax. Wall thicknessmin. Wall thicknessspeed mtr.mts-803/08/12920.540mts-1303/13/12152.50.538mts-2004/20/12202.50.535mts-3006/30/12323.2132mts-4008/01/40454.5130mts-6513-657561.528mts-10020-1001158.1225mts-12525-1251408.5225mts-15030-1501659.5318mts-20040-20021510416

Cut To Length Machine is the equipment, mainly used for strip cutting and loading. Except manual punching, all the other processes of the production line of Cut To Length Machine are under PLC Control, resulting in a high level of automation. These Cut To Length Machine have continuous movement for accurate and complete ordering. The electrical system is designed in such a way to that the Hydraulic Pressure System and Pneumatic System efficiently executed. Main Components

• Uncoiler
• Clamp
• Leveling device
• Cut to length unit
• Shearing machine

Devices For

• Loading
• Feeding
• Guiding
• Moving

Specifications

Item	Parameters
Suitable material	Copper alloy, aluminium, brass
Plate thickness	2 30mm
Plate width	25 300mm
Cutting range	600 18000mm Lenth
Cutting accuracy	0.31
Max. working speed	adjustable

Avail the best quality strip profile draw bench machine from us. Strip profile draw bench machine is used for straight length die-drawing of strip for producing straight lengths of shaped stripe. specificationsmodel no.minimum thickness (mm)maximum thickness (mm)minimum width (mm)maximum width (mm)msdb-10x20210520msdb-08x30481030msdb-10x406102040msdb-12x608123060msdb-15x7510153575msdb-20x100122050100msdb-25x150152580150msdb-40x2501540140250

Wire Pointing Machine is used to point the starting end of wire. The Wire Pointing Machine has two rollers, having different sizes of grooves on their periphery. As the Wire Pointing Machine starts, the rollers rotate in opposite direction of each other. The end of the wire, to be pointed, is pushed between the two rollers which tend to point the wire. The Rollers of our Wire Pointing Machine are made out of high quality alloy steel, duly hardened and ground to give longer working life. MechanismBefore the wire is pushed through the die hole of wire drawing machine, to put in the wire in the die it should be pointed at the starting end. This ensures that it passes through the die hole easily. The pointed end of the wire is then pulled by the means of pull-in tong in order to draw it. Details

• Wire and Bar : 1mm to 6mm and 7mm to 20mm
• Material : Ferrous and Non Ferrous

Salient Features

• Rollers are made from hardened & grounded Alloy
• All Gears & Shafts are made from EN8 & EN9 Material
• Main Shaft Rotate in spherical bearing
• All gears are fully covered
• Body & structure made from steel plates

.

We offer the single bull block non-slip type drawing machines designed for drawing of metals like copper, aluminium, mild steel, brass. It is a vertical & horizontal bull block machine with multi speed & variable drives suitable for ferrous& non-ferrous tube & wire ranging from 1mm to 30mm inlets. descriptionbull block wire drawing machine is used to draw tube & wire size from 30mm to 1mm. This machine is also continuous type for multiple pass, the body of the machine is made up of graded cast iron or it can be made up of mild steel plates. The drum is made up of graded cast iron with surface hardening at its drawing portion with smooth grinded finish. capacity

• tube : 25mm
• rod : 16mm
• material : ferrous and non ferrous

We offer hydraulic shearing machine. the company takes immense pleasure in presenting hydraulic shearing machine in india and abroad. The hydraulic shearing machine is manufactured in a hi-tech manufacturing setup following the highest quality standards. We are regarded among the top hydraulic shearing machine manufacturers, suppliers, and exporters in india. The hydraulic shearing machines are made available at affordable prices. highlights

• superior quality
• robust construction
• corrosion resistant
• extremely durable

as per your product/service range and package, we have selected template number - in - to develop your website. In order to view the presentation of the selected template, please copy and paste the below mentioned link in internet explorer or any other browser (in address bar).

We are offering Hydrostatic Tube Testing Equipment. Meraj Engineering Hydrostatic Testing Unit is a safety-oriented product, which used to pressure test tubing and premium connections up to 10, 000 PSI, in order to meet API standards. The Hydrostatic Tube Testing Equipment utilizes test plugs with motorized rotation, allowing for appropriate torque application, ultimately enabling quality test operations. Features

• Tube clamping through pneumatic system
• Easy changeable tooling system
• Motorized mechanism for movement of front and back seal holder
• Length setting for different length of tubes can be set by quick adjustable moveable testing head
• Different tube diameter can be tested just by changing the rubber seal
• Seal Holder Unit- Movable Type
• Tube Ejecting System- Pneumatically

Operations

• Auto
• Semi Auto
• Manual

SpecificationsModel No.Max. OD in mmMin. OD in mmMax. Press. In Kg/cm2Max. Tube Length in Mtr.MHT-405062008MHT-100110253008MHT-150150404008.