FIBER LASER TECHNOLOGY

Briefly, fiber laser light is created by banks of diodes. The light is channeled and amplified through fiber optic cable similar to that used for data transfer. The amplified light, on existing the fiber cable, is collimated or straightened and then focused by a lens onto the material to be cut.

FIBER LASER CUTTING WORKING PRINCIPLE

Fiber laser cutting machine is equipped with the most advanced international imported fiber laser source which generates powerful laser focused on objects to cause instant melting and evaporation. Automatic cutting is controlled by digitalized mechanic system. This hi-tech machine has condensed the advance technologies of fiber laser, digital, and precise mechanics.

FIBER LASER CUTTING MACHINE APPLICATION FIELDS

Applicable to fast cutting on plate or tube in metal, mainly for cutting on SS, Carbon steel, Manganese steel, galvanized plate, alloy plate, rare metal; Widely used in kitchen appliance, electric control box, high-resolute device, mechanical equipment, hardware and metal processing.

FIBER LASER CUTTING ADVANTAGES

Fiber lasers are up to ten times more energy efficient than traditional YAG and Co2 laser systems. And, consuming little to no energy when not active, the annual energy savings can attract government grant funding for industrial energy efficiency programs.

Fiber laser have no mirrors to adjust or align, and no lamps to replace. Maintenance is minimal, so utilization and up-times are maximized. The laser really are designed as shop floor industrial tools.

Fiber laser machine is of low cost which consume very low electricity every hour. It has a lifespan of 1, 00, 000 hours. Fiber laser is maintenance free and its higher cutting speed and efficiency, speed of cutting plate can reach over 10 meters per minute.

Powerful Hardware Configuration

The hardware of closed- loop control system consists of BMC1214 four axis motion card and BCL3724 terminal board. The system adopts high- precision 16- bit DA chip with low- noise and low-drift coefficient signal; Powerful real- time computing power is provided by High-performance ARM processor and FPGA coprocessor; The system can run more fast and smooth owning to 32 large capacity SDRAM memory; Reliable communication can be still achieved in harsh industrial environment due to high- speed differential communication bus. The system is safe, reliable and easy to manage due to coming with its time encryption and decryption function without needing other dongle.

CYPCUT SOFTWARE

New function of CypCut cutting softwareBetter speed, better convenience, better security and better use:

Start processing immediately without waitingIt can operate with smooth, high-speed and precision due to leading high-speed NURBS real-time interpolation, and start processing in any position without waiting. Whenever stop, alarm or power-down happens, it can continue to work from the breakpoint.

One Graph, Numerous Processes

You can complete a variety of processes by drawing only one graph. Pre-piercing: Piercing in advance according to your graph. Cutting with a film: Cutting after eliminating the film by stripping process. Secondary cooling: Processing once following immediate cooling along track.

Fast & Practical Scanning Cutting

Now it is possible to scan and cut straight line in any direction, and to naturally and progressively cut circular arc of arbitrary arrangement. We can ensure the tangent between circular arc and scan with smooth and high-speed.

Convenient Seeking- Edge & Locating

Not only capacitive seeking- edge, but also infrared and visual orientation can be easily operated using BCS100. The position and angle can be simultaneously determined in any case mentioned above.

Q22 Is Special For High Precision Machinery Parts And Microelectronics And Jewelry Industries. Q22 Is Very High Speed And Higher Precision Professional Machine For Cutting Thin Metal Sheet Like Stainless Steel, M.S., Carbon Steel, Galvanized Steel, Copper, Aluminum, Brass, Gold, Silver Etc.

X, Y Axis adopt round rail and belt transmission to make machine more stableStable and full equipped design concept, equipped with advanced industrial cooling system with anhydrous alarm automatic protection system, improve the stability and safety of continuous work. Full-equipped dust, anti pollution exhaust system, more attention to environmental protection.

30 mm Acrylic0.8 mm Stainless Steel1.0 mm MS10 mm MDF

CNC Plasma Cutting machines are widely used for cutting Stainless Steel, Aluminum, Iron, Galvanized sheet, Titanium plate, M.S. plate for signs, architectural components, fabrication units etc.

Plasma Source :Mehta has selected the Hyperthem (U.S.A.) as our preferred plasma source. Hypertherm is the world leader in plasma cutting technology and has proven to be consistent, reliable products for all levels of production demands

Torch Height Controller (THC) :The Torch height control system ensures that the cutting torch stays at the right height from the work piece. THC helps to increase the life of consumable like nozzle and improves cutting quality.

Fume Extraction Bed :Plasma bed is fabricated by metal sheet with specialized water bed system which is helpful to fumes.

It is suitable for small area craft processing on wood, bamboo, color board, rubber, acrylic, clothing and leather. It is special designed for stamp, portrait, badges, chest cards and various small engraving and cutting.

FIBER LASER TECHNOLOGY

Briefly, fiber laser light is created by banks of diodes. The light is channeled and amplified through fiber optic cable similar to that used for data transfer. The amplified light, on existing the fiber cable, is collimated or straightened and then focused by a lens onto the material to be cut.

FIBER LASER CUTTING WORKING PRINCIPLE

Fiber laser cutting machine is equipped with the most advanced international imported fiber laser source which generates powerful laser focused on objects to cause instant melting and evaporation. Automatic cutting is controlled by digitalized mechanic system. This hi-tech machine has condensed the advance technologies of fiber laser, digital, and precise mechanics.

FIBER LASER CUTTING MACHINE APPLICATION FIELDS

Applicable to fast cutting on plate or tube in metal, mainly for cutting on SS, Carbon steel, Manganese steel, galvanized plate, alloy plate, rare metal; Widely used in kitchen appliance, electric control box, high-resolute device, mechanical equipment, hardware and metal processing.

FIBER LASER CUTTING ADVANTAGES

Fiber lasers are up to ten times more energy efficient than traditional YAG and Co2 laser systems. And, consuming little to no energy when not active, the annual energy savings can attract government grant funding for industrial energy efficiency programs.

Fiber laser have no mirrors to adjust or align, and no lamps to replace. Maintenance is minimal, so utilization and up-times are maximized. The laser really are designed as shop floor industrial tools.

Fiber laser machine is of low cost which consume very low electricity every hour. It has a lifespan of 1, 00, 000 hours. Fiber laser is maintenance free and its higher cutting speed and efficiency, speed of cutting plate can reach over 10 meters per minute.

Powerful Hardware Configuration

The hardware of closed- loop control system consists of BMC1214 four axis motion card and BCL3724 terminal board. The system adopts high- precision 16- bit DA chip with low- noise and low-drift coefficient signal; Powerful real- time computing power is provided by High-performance ARM processor and FPGA coprocessor; The system can run more fast and smooth owning to 32 large capacity SDRAM memory; Reliable communication can be still achieved in harsh industrial environment due to high- speed differential communication bus. The system is safe, reliable and easy to manage due to coming with its time encryption and decryption function without needing other dongle.

CYPCUT SOFTWARE

New function of CypCut cutting softwareBetter speed, better convenience, better security and better use:

Start processing immediately without waitingIt can operate with smooth, high-speed and precision due to leading high-speed NURBS real-time interpolation, and start processing in any position without waiting. Whenever stop, alarm or power-down happens, it can continue to work from the breakpoint.

One Graph, Numerous Processes

You can complete a variety of processes by drawing only one graph. Pre-piercing: Piercing in advance according to your graph. Cutting with a film: Cutting after eliminating the film by stripping process. Secondary cooling: Processing once following immediate cooling along track.

Fast & Practical Scanning Cutting

Now it is possible to scan and cut straight line in any direction, and to naturally and progressively cut circular arc of arbitrary arrangement. We can ensure the tangent between circular arc and scan with smooth and high-speed.

Convenient Seeking- Edge & Locating

Not only capacitive seeking- edge, but also infrared and visual orientation can be easily operated using BCS100. The position and angle can be simultaneously determined in any case mentioned above.

Q22 Is Special For High Precision Machinery Parts And Microelectronics And Jewelry Industries. Q22 Is Very High Speed And Higher Precision Professional Machine For Cutting Thin Metal Sheet Like Stainless Steel, M.S., Carbon Steel, Galvanized Steel, Copper, Aluminum, Brass, Gold, Silver Etc.

X, Y Axis adopt round rail and belt transmission to make machine more stableStable and full equipped design concept, equipped with advanced industrial cooling system with anhydrous alarm automatic protection system, improve the stability and safety of continuous work. Full-equipped dust, anti pollution exhaust system, more attention to environmental protection.

30 mm Acrylic0.8 mm Stainless Steel1.0 mm MS10 mm MDF

CNC Plasma Cutting machines are widely used for cutting Stainless Steel, Aluminum, Iron, Galvanized sheet, Titanium plate, M.S. plate for signs, architectural components, fabrication units etc.

Plasma Source :Mehta has selected the Hyperthem (U.S.A.) as our preferred plasma source. Hypertherm is the world leader in plasma cutting technology and has proven to be consistent, reliable products for all levels of production demands

Torch Height Controller (THC) :The Torch height control system ensures that the cutting torch stays at the right height from the work piece. THC helps to increase the life of consumable like nozzle and improves cutting quality.

Fume Extraction Bed :Plasma bed is fabricated by metal sheet with specialized water bed system which is helpful to fumes.

It is suitable for small area craft processing on wood, bamboo, color board, rubber, acrylic, clothing and leather. It is special designed for stamp, portrait, badges, chest cards and various small engraving and cutting.