MEHTA CAD CAM SYSTEMS PVT. LTD

Sarkhej, Ahmedabad, Gujarat

Overview

FIBER LASER TECHNOLOGY

Briefly, fiber laser light is created by banks of diodes. The light is channeled and amplified through fiber optic cable similar to that used for data transfer. The amplified light, on existing the fiber cable, is collimated or straightened and then focused by a lens onto the material to be cut.

FIBER LASER CUTTING WORKING PRINCIPLE

Fiber laser cutting machine is equipped with the most advanced international imported fiber laser source which generates powerful laser focused on objects to cause instant melting and evaporation. Automatic cutting is controlled by digitalized mechanic system. This hi-tech machine has condensed the advance technologies of fiber laser, digital, and precise mechanics.

FIBER LASER CUTTING MACHINE APPLICATION FIELDS

Applicable to fast cutting on plate or tube in metal, mainly for cutting on SS, Carbon steel, Manganese steel, galvanized plate, alloy plate, rare metal; Widely used in kitchen appliance, electric control box, high-resolute device, mechanical equipment, hardware and metal processing.

FIBER LASER CUTTING ADVANTAGES

Fiber lasers are up to ten times more energy efficient than traditional YAG and Co2 laser systems. And, consuming little to no energy when not active, the annual energy savings can attract government grant funding for industrial energy efficiency programs.

Fiber laser have no mirrors to adjust or align, and no lamps to replace. Maintenance is minimal, so utilization and up-times are maximized. The laser really are designed as shop floor industrial tools.

Fiber laser machine is of low cost which consume very low electricity every hour. It has a lifespan of 1, 00, 000 hours. Fiber laser is maintenance free and its higher cutting speed and efficiency, speed of cutting plate can reach over 10 meters per minute.

ERICA available in three working area 1) 18 x 29 (457mm x 730mm), 2) 24 x 36 (610mm x 910mm), 3) 36 x 48 (910mm x 1220mm).
High speed, high accuracy thanks to AC servo motor from Mitsubishi, Japan.
The latest type of X-Y rails make it more stable, maintenance free operation for longer period.
Precision engraving and good quality of cutting, thanks to Synrads original all-metal laser tube technology.
ERICA available in 25w, 60w, 80w and 100w metal laser tube from Synrad U.S.A. for cutting different thickness of acyclic & MDF.
Table up & down facility up to 6.5 inch. Laser engraving can be done up to 6.5 inch height of materials.

Diamond Edge Polishing System

When using diamond edge polishing, edges on acrylic sheets are moved over sharp, fast-rotating diamonds. Properly done is the result so good that diamond polishing can be compared with cast surfaces. Moreover, the method is relatively inexpensive and can be performed on large batches.

Diamond edge polishing may be used on edges of shelves and signs that have previously been sawn to correct dimensions.

It should be noted that diamond edge polishing is exclusively for straight or sloping sides. Eg. it cannot be used on rounded corners

X, Y Axis adopt round rail and belt transmission to make machine more stableStable and full equipped design concept, equipped with advanced industrial cooling system with anhydrous alarm automatic protection system, improve the stability and safety of continuous work. Full-equipped dust, anti pollution exhaust system, more attention to environmental protection.

30 mm Acrylic0.8 mm Stainless Steel1.0 mm MS10 mm MDF

Pass Through Design for long length of work piece in Y-axis direction
Machine is Provided with Foot-mounting legs so that there is no vibration in machine can be adjusted on zero level.
As it is made in india No waiting period for spare parts & quick service support
Machine is provided with heavy duty compressor which has Air-assist combining adjustable focus systems in coaxial jet air to prevent cutting edge from burning down
Laser cut software with window based software enhance cutting speed & angle / curve performance
Laser seals the edges of fabric while cutting
Maximum cutting thickness of arcylic - 25mm
High quality of chiller unit for better performance and long life of laser tube.

Charactristics
(3 year outdoor)
Superior adhesion / scratch resistance / Alcohol Resistance
Long Years outdoor durability gauranteed
Free Cloggging / Banding / Over-Spraying / White Dot
High Ink Color Density and Bright, Vivid Colors
Same color Gamut as Original Ink
Available with original Ink ICC
Fast Drying Speed For High Speed Printing
HAPs-Free, NMP-Free, Nickle-Free, VOCs-Free
30% Ink Consumption saving
Low Odor

NENO Solvent based inkjet is specially designed for the large format printers with Piezo printhead. NENO ink is using high quality imported raw material and advanced prescription such as grinding, disprsion and packaging for mass production. With many years of developing market, our ink have been widely used in world.

Features & Advantage
Using high quality imported pigments from CIBA, CLARIANT etc.
Stabilized printability on the press
Achieve deep, brilliant color tone of remarkable dot reproduction without clogging up the printhead
Light smell with excellent adhesion

• The Fully automatic multifunction and double edge furring equipment.
• You can work with all foils (PVC, PET, PO etc.) high class foils as well as veneers or laminates.
• PVS film can be precisely pressed on uneven surfaces.
• Dual heater used for consistant heating.
• Stationary hot room reduces chances for damage to the heater assembly.
• Auto and manual both operations can be performed.
• Both side vacuum bed arrangement is possible for mass production

Mehtas sublimation metal sheet is highly qualitative with highest transfer printing ratio, vivid colour. We have wide range of colours. It can be widely used for signs, Advertising Decoration, Awards, Plaques, Labels, Nameplates, information board, metal Photos, Electrical Products Panel/Cover, Personalized Metal Gifts etc.

EMMA laser provide a fast, flexible and efficient way to permanently mark a wide variety of materials such as, metals, plastics, ceramics and silicon.EMMA lasers are commonly used for identification and traceability marks such as serial numbers, date codes, manufacturers info, material flow, barcodes, 2D data matrix, logos, graphics & more.EMMA fiber lasers can be easily integrated into tabletop marking system automated manufacturing cells, and customized multi-axis machine tools. Depending on the specific application requirements.

FeaturesFirst and last pulse equally useable.Bitmap marking compatible.High repeatability/stability design.Status monitoring and safe shut down.High speed marking (MHz repetition rate).Long using time : the average using time more than 80000 hours.Good Stability and free maintenance : No need to Maintenance for laser device.

1. USA MICROPUMP Gear Pump assures the stability of the Fluid delivery system and high print quality.2. PRIMA Special Printhead can be adjusted within 360 degree. The standard size of the nozzle plate is 60m. 40m/50m/55m/65m is also available3. Automatic Calibration adjusts jetting parameters automatically to help ensure high quality print.4. Advanced fluid delivery system resists ink buildup and maximizes uptime, eliminating spills and helping to ensure the correct fluids are recycled so that there is no fluid waste5. Automatic cleaning of printhead and fluid delivery system during start up and shutdown process. One key intelligent automatic cleaning function.6. Automatic Alarm system when the ink and solvent is below the warning line.7. Stainless steel cabinet with satin-finishing can prevent dust and water efficiently. IP 54 protection grade.8. English interface with English operation manual.9. Read USB Flash disk to load images.

ApplicationsFood & Beverage: Fruits, Vegetable, Baked Goods, Cereal, Candy, Confectionery, Fish, Seafood, Dairy, Snacks, Frozen Prepared Foods, Oil, condiment. Wine, Mineral Water, Cola, JuiceCosmetics, Personal and Home Care: Perfume, Shampoo, Face Cream, Soap, DetergentPharmacy & dietary supplement: PE Medicine Bottle, Glass Medicine Bottle, Medicine box.Electronic Industry: USB Interface, Mobile phone cover, Battery, Energy Saving Lamp, Printed circuit board, Nixie tube. Construction Industry: Wood Board, PVC Tube, PVC Slot, PPR Tube, Steel Tube, Aluminum SheetOthers: Toy, Pet food, Animal Feed, IC Card, Auto part, Paper, Label, Lubricating oil.

Fluid Consumption1. Ink 500ml/Bottle, 10 Bottles/Carton: The color can be Black, Red, Yellow, Green, Blue, UV ink (visible under an ultraviolet light in blacklight). High-adhesive ink can afford 180C high temperature steaming. Environmental with SGS PFOA and PFOS certificate. 500ML can print 7.2 millioncharacters.2. Solvent 500ml/Bottle, 10 Bottles/Carton: Environmental with SGS PFOA and PFOS certificate. 500ML can print 28 hours.3. Cleaning Agent 1L/ Bottle, 12 Bottles/Carton: Cleaning agent is used to clean the printhead during shutdown. Environmental with SGS PFOA and PFOS certificate

Keyboard:Membrane switch with tactile feedback and special function keys. Simple Chinese character, Traditional Chinese Character, English Alphabet, Arabic Numerals, Common Symbol and Custom Logo/ Graphics is available

Features :
German classic design.
Light weight and portable.
Manual cutting by hand no need power supply.
Alloy blade, durable & sharp.
Make cutting fast, easy and convenient.
Transparent acrylic guard plate to protect your hand.
30 cm or 12 inches ruler available.
Perfect cutting edge.

Specifications

Laser Fume Ventilator is designed for filtrating hazardous fumes and dusts which is generated in the process of laser processing, like laser cutting / engraving / marking/welding / cladding / coding etc. The main function of them is protecting the health of the employees, keeping the machines performance and decreasing environment pollution. Meantime, it can increase product quality, reduce potentional cost.

Principle & Characteristics

Fiber laser marking is a technique which uses computer-controlled laser beam to leave permanent mark on the surface of various kinds of object. The working principle of fiber laser marking machine is to use light amplication to cause chemical effect or burn part of the material to mark letters, symbols, bar codes, and other graphics on an object.

Fiber laser marking machine is mainly composed fiber laser, laser scanning galvanometer and controller. The fiber laser has the advantages of small size, high quality beam, no maintenance and etc. The output center wavelength of fiber laser is 1064 nm and the life time is around 100, 000 hours. Compared with other king of lasers, fiber laser has a long life.

Advance Features1. Can mark both metallic and nonmetallic materials, especially those materials with high hardness, high melting point or brittle materials.2. High processing speeds, low operation cost, constant high quality and durability of the results, high flexibility in automation. Laser marking is a perfect choice for mass production.3. Laser marking is non contact type of marking so it doesn't produce stress on the materials. It will not alter the physical properties of the materials processed.4. Laser is a clean and safe process as it is chemical-proof, water-proof, oil, grease & fuel proof.5. As the laser beam spot size (after focusing) is small, the heat-affected zone is much smaller, thus allowing it to achieve fine processing that other conventional methods cannot.6. Laser Marking is a flexible process as one can mark texts, alphanumeric, logos, bar codes, graphics, images, 2D data matrix code, etc.7. It is a user-friendly and cost effective marking solution as virtually no consumables.8. Laser marking enhances the aesthetical & monetary value of products by making it more attractive & eye catching

ApplicationsLaser marking machine is widely used in most kind of products in different industrials, such as integrated circuit chip, computer accessories, industrial bearings, watches and clocks, electronic and telecommunication products, aerospace parts, auto parts, home appliances, hardware tools, molding, wire and cable, food packaging, jewellery, tobacco and etc.

Hand Tool For Making Round Corners

ERICAs lastest laser engraving & cutting control system has better stable hardware with antistatic, resistance to high pressure. Based on 3.5-inch colorful screen, human-machine operation system, with better operation interface and stronger functions, excellent motion control functions, highcapacity file memory, with strong compatible 2-way independent adjustable laser power control interface, strong compatible U disk drive program, multiple ways general/dedicated IO control.

The linear guideway body consists of an anodized aluminum housing with a chrome steel gcr15 shaft which is of low friction, noise and vibration. The pulleys/pinion is equipped with maintenance free U shape bearings.
It redefine the classic belt drive, putting belts to work in an entirely new way that reduces the positioning errors and speed limitations of conventional belt drives.
Mehta's linear modules provides high load capacities, high speed, accuracy and repeatability. The linear bearing system is corrosion resistant, even after scratching.