Anaesthesia Machine " MED LIFE LINE " used for Anaesthesia is mounted on a Steel Tubular structure which stands on four heavy duty Antistatic Castor wheels bearing & breaks on two front wheels for mobility of the machine. Top tray is for monitoring Equipment middle shelf made of Stainless Steel is meant for Surgical Equipment & lower drawer for clinical storage. A back bar is fitted to rectangular rear bar to accommodate Rotameter Unit, Vaporizer, Non Return cum blow off Valve. Rotameter tubes 230 mm long are Calibrated in double triple scale of accuracy and clarity in reading O2 : 100 mlmin to 10 litrmin , N2O : 200 mlmin to 12 mlmin. MED LIFE LINE machine has a Changeover unit which allows the equipment to be used in both open and close mode and has an integrated Oxygen flush unit which operates through a push button. A battery operated audio Oxygen Failure Alarm activates when Oxygen pressure falls to 205 kPa. Non Return cum blow off valve is provided to ensure that pressure in patient circuit does not exceed 200cm water. Two heavy duty Nitrous Oxide regulators are actuated only when Oxygen regulators to prevent administration of N2O alone to patient circuit in the absence of Oxygen. A platform is provided at the back of machine for two 10 ltr water capacity gas cylinders. For close circuit anaesthesia a CO2 absorption unit (Circle Absorber) can be mounted on machine and used with economy of gas and minimum pollution at O.T. 63mm dia pressure gauges are used for better vision of scale reading and clarity. Provision for additional Oxygen is given in machine to allow use of ventilators, nebulisers, sprays etc.
Sinthi, Kolkata, West Bengal 