Gurugram, Haryana, India
Our Products
Fatty Acids Distillation plant is broadly divided into three main section. vis. de-gasification, pre-cut system and main distillation system. These main process section are supported for optimum cooling based on thermostatised water system.
Crude fatty acids from battery limit is filtered, pre-heated and admitted to the de-gasifying unit operating under vacuum, where it is dried and de-gasified. Crude fatty acids, from de-gasifier is heated in thermic fluid exchanger and fed to the pre-cut column.
The pre-cut column operates under vacuum and is composed of various section; starting from bottom, the main sections are vaporization section, Two sections of distillation packing bed, pump-around section and scrubbing section. From bottom of the column, the product is sent to Fatty Acid Distillation column.
The main distillation column operates under vacuum and is composed of various section; starting from bottom the main sections are vaporization section, stripping section, one set of washing section, one pump-around section and one scrubbing section
Bio-diesel plant manufacturing in technical collaboration with Green Fuels Limited (UK, Germany).
Our bio-diesel system is an innovative technology which can use different kinds of fresh vegetable oils (e.g. sunflower, rape seed oil, palm oil) but also used vegetable oils and fats.
There is no need for any technological or process modification if another input material will be used.
The change from fresh vegetable oils to waste oils and vice versa can be done during normal operation; there is no need for a shutdown of the system. Only the software of the automatic process control has to be adjusted to the new input material.
The bio-diesel plant manufacturing system is able to use different cold- and hot pressed fresh vegetable oils as well as pre-treated used vegetable oils.
In all cases, if the operator of the plant follows the required qualities of the input materials and ensures a constant process operation, the product quality will be in correspondence with the requirements of the European bio-diesel standard DIN EN 14214 as well as with all other conventional international norms.
It has to be pointed out, that used vegetable oils and certain fresh oils like palm oil only can be used for the production of so-called summerbiodiesel because the winter stability can not be ensured yet. For all different raw materials a transesterification grade of > 98 % and constant product quality will be reached.
The system requires just low amounts of water (approx. 10 %). The produced soap water is fed into the glycerine phase. The control and monitoring system operates automatically due to the installed PLC-system.
