Post Buy Requirement
MI
Navi Mumbai, Maharashtra, India
Add Review

Our Products

  1. Transducer 8 Products available
  2. Measuring Instruments & Equipment 20 Products available
  3. Transformers 4 Products available
  4. Calibrators 3 Products available
  5. Multimeter 4 Products available
  6. Testing Equipment 9 Products available
  7. Others 10 Products available

Measuring Instruments & Equipment #4494841

SWITCHBOARD METERS

  • Material Case: Complies to DIN 43700, Colour : White, Front Glass : Flat glass on standard models. Anti-glare glass available on request Etc.
These instruments consist of a moving piece of ferro magnetic material, which is under influence of a current carrying fixed coil. Considering the quadratic nature of the deflecting torque, the scale of these instruments is non-linear. Considering the above mentioned operating process, these instruments are ideally suited for measuring TRMS current and voltage in alternating current circuits. Ammeters are mostly used alongwith externally mounted current transformers, though ammeter upto 100A for direct connection are also provided. Voltmeters upto 750V can be provided. Ammeters with over scale suppressed scale of 2xIn and 6xIn to withstand high and very high motor starting currents can also be provided. Accuracy for these meters is applicable only within the nominal working range and not in the overscale range.However please note that all Ammeters can withstand an overload of 10 times the rated range for maximum 5 sec. and 2 times rated currents continuously. When using external current transformer, please ensure that the secondary current value of the CT must be the rated current of the Ammeter i.e., In.
View Complete Details

Solar Power Meter

  • Applications Solar Power Plant, Windows performance - calculate the rate of daylight penetration Physics and optical laboratories Etc.
This instrument is designed to measure Solar Power in the range from 400 to 1100 nanometers. The good Spectral Range, Orientation and Angular detection of meter allow users to conduct the most precise quantitative measurements of Solar Power RadiationSolar Power Measurement with Orientation and Tilt AngleEasy measurement for rate of daylight penetrationAuto change for measuring rangeAuto power off with disable functionInstantaneous display AveMinMax values20 points memorySocket of tripod mountingMagnetic mountBacklit LCD and 4 digits triple display
View Complete Details

Solar Module Analyzer

  • Dimension 257 x 155 x 57 mm (approx.)
  • Environment 5ºC ~ 50ºC, ≤ 85% RH (Operating) , -20ºC ~ 60ºC, ≤ 75% RH (Storage) Etc.
I-V Curve Test for Solar Panel Module CellMax. Solar CellModule Power Cell Power(Pmax) search by Auto-ScanCapability: 60V, 12ABest Resolution: 1mV , 1mAManual Single Point I-V TestMax. Voltage (Vmaxp) at PmaxMax. Current (Imaxp) at PmaxVoltage at Open Circuit (Vopen)Current at Short Circuit (Ishort)I-V Curve with Cursor to Display each Data PointEfficiency (%) Calculation of Solar Panel
View Complete Details

MULTIFUNCTION AUTOMOTIVE METER

2 in 1 Automotive Auto Ranging DMM & Power Probe (MAM6120)3 in 1 Automotive Auto Ranging DMM, Power Probe & Logic ProbeHands - Free Test Leads for Excellent ConvenienceFlashlight for Operation of Automotive DiagnosisAuto Range, Auto Power Off, Low Battery Warning & Data Hold
View Complete Details

Battery Meter

Meco bm63 is a portable battery tester which can check the capacity condition of different types of batteries from 4 to 500ah.the product consists of a dc voltmeter, load resistor and testing clip. The state of the battery is indicated on the meter dial as 'ok'(green), 'weak' (yellow) and 'bad' (red) directly.
View Complete Details

12V BATTERY METER

  • Technical Specifications Rated Voltage of Battery to be Tested : 2, 6, 12V DC, Rated Capacity of Battery to be Tested : 2 - 200Ah Etc.
MECO ABM18 is a portable Automobile Battery Tester which can check the capacity condition of different types of Motorcycle and Motorcar batteries from 2 to 200Ah. The product consists of a DC Voltmeter, Load Resistor and Testing Clip. The state of the battery is indicated on the meter dial as 'FULLUP' (White), 'NORMAL' (Green), 'RECHARGE' (Yellow), 'DISCHARGE' (Red) directly.
View Complete Details

3 PHASE ADAPTER POWER METER

  • General Specifications : Numerical Dual Display : 4 Digit 999 Count LCD, Battery Life : 32 hours approx. Etc.
4 Digit LCD, 9999 Count, AutorangingData Hold, Auto Power OffDual display KW + PF, KVA + , KW + HP, KW + KVAR, V + A, A + Hz, V + HzCable of Diameter upto 43mm Busbar upto 65mm x 16mm3 Phase Adapter.
View Complete Details

3 PHASE AUTOMATIC COMPUTATION POWER METER

  • General Specification Numerical Dual Display : 4 Digit 999 Count LCD, Battery Life : 32 hours approx. Etc
4 Digit LCD, 9999 Count, AutorangingData Hold, Auto Power OffDual Display KW + HP, KW + PF, KW + KVAR, KVA + , V + A, A + Hz, V + HzCable of Diameter upto 43mm Busbar upto 65mm x 16mm.
View Complete Details

CLAMP TRMS POWER METER

  • Feature TRMS Measurement, 4 Digit LCD, 9999 Count, Autoranging Etc.
Check Motors and Compressors, Check for Energized Circuits & Loads, Ideal for Electrical Energy Audit of Heating, Ventilation & Aircom Systems (HVAC, To Identify Low Voltage Control Signal, To Identify Power Sources, 1 3 (3p3w 3p4w) Power Calculations, Evaluate Electrical Contacts, Verify the Stability of Voltage
View Complete Details

3 AXIS ELECTROSMOG METER

Frequency Range 50MHz to 3.5GHzFor Isotropic Measurement of Electro Magnetic FieldsNon-Directional (Isotropic) Measurement with Three - Channel Measuremen SensorHigh Dynamic Range due to Three Channel Digital Results ProcessingConfigurable Alarm Threshold and memory FunctionEasy and Safety to use
View Complete Details

3 AXIS ELECTROSMOG METER

Frequency Range 10 MHz to 8.0 GHzTriaxial Isotropic Measurement of EMFNon-Directional (Isotropic) Measurement with Three - Channel Measurement SensorHigh Dynamic RangeConfigurable Alarm Threshold and Memory FunctionEasy & Safety to Use
View Complete Details

Lcr Meter

  • Dimension 193 x 93 x 48mm (approx.)
  • Weight 395gms (approx.)
  • AC Adaptor Input : 220V (1 ± 10%), 50Hz (1 ± 5%) : Output 12V DC
Basic measurement accuracy 0.1% & speed upto 10 meas secLarge LCD display with bright white backlightUltra low power consumption, battery powered for 2 hours of continuous useAutomatic identification function (Ai).Percentage display & 4 tolerance comparator : 1%, 5%, 10% & 20%9V battery & External power supplyAutomatic correction function with datahold, max. min. average recordingUtility function configuration & current setup recovery after power offStandard Mini-USB interface, SCPI compatibleAuto power OffConstant output impedance : 100 ohm
View Complete Details

Transformer Turns Ratio Meter

  • Accesssories Test Leads x 1 Pair, Alligator Clips x 4, Rechargeable Lithium Battery x 1, Instruction Manual x 1, AC Adaptor x 1, Power Cord x 1, Software CD & Manual x 1, Carrying Bag x 1.
Transformer is a very important Element in the Electric Power Distribution System. It needs to be maintained from time to time to Guarantee Smooth Power Supply at Consumer end. MECO TTR8100 is Portable instrument for accurate measurement of 1-Phase & 3-Phase Transformer VT CT Turned Ratio, Excitation Voltage, Current, Phase Angle and Deviation. TTR8100 ensure the Correct Turn Ratio & Quality of the Transformer. It Check Live Test Point, Short Circuit, Open Circuit and Revers Polarity before each measurement.
View Complete Details

3 PHASE VIF METER

  • Ordering Information Model, Input Voltage, Input Current, Input Frequency, System 3R3E4W and Auxiliary Supply
TRMS MeasurementsMeasures V, A, Hz, Run, Hour, On Hour and RPMRUN Hour On Hour (Max.99999 Hours, 59 Minutes, 59 Seconds)RUN Hour On Hour Reset FacilityAuto Scroll Manual Scroll Display3 Phase 4 Wire3 Rows of 3 Digits Super Bright Red LED DisplayProgrammable CTR, PTR, Number of Pole SettingAuto Indication for 'KV' and 'KA'Auto Selection of Decimal Point
View Complete Details

Switchboard Instruments Multifunction Meters

12 Parameters, 68 Values on 22 Pages3 Phase 4 Wire Complete with Standard AccessoriesProgrammable CTR & PTR, Instr. Address, Password & MD PeriodColoured Input Terminals for Phase IdentificationPOWER MASTER Software Datalogging, Tabulation & GraphsBuilt-In 20 Energy Meter of 8 Digit ResolutionTRMS MeasurementRugged & Portable CasingRS 485 Port, 5kV Isolated Port (Standard)Max. Demand, THD, Password Protection & Auto Scroll FacilitiesEnergy Retention & Energy Reset FacilityClamp-On CT's for Current InputFull Annunicators on Display
View Complete Details

1 PHASE MULTIFUNCTION APPLIANCE METER

  • Feature Measures V, A, PF, Hz, KW, KVA, KVAr, Kwh, KVAh & KVArh, Auto / Manual Scroll Display (User Selectable) Etc.
Appliances Testing (AC, Refrigerator, Washing Machine, Air Cooler, Microwave Oven etc.)LED Light TestingCan be given to field technicians in their tool kitAt the point of sale to demonstrate energy efficiency of your product over competitionCan be used by R & D Dept in Designing Energy Efficient ProductsStudy of Energy Efficiency of Electrical EquipmentProduct Quality TestingEnergy Audit and Plant MaintenanceBuilding Management SystemsPower Management
View Complete Details

1 PHASE MULTIFUNCTION METER

  • Application Appliance Testing, Energy Audit Testing, Studying Energy Efficiency of Electrical Equiptment, Generator / Motor Characteristics Etc;
10 Parameters on 10 Display PagesMeasures V, A, PF, Hz, KW, KVA, KVAr, KWh, KVAh and KVArhAuto Manual Scroll Display (User Selectable)Reduce Panel Space & Wiring TimePortable Type, Desk Top Case with Tilt Stand for EM-08DState of the Art Microcontroller DesignTRMS MeasurmentIdeal for Testing of Electrical AppliancesUser Programmable CT Ratio (1.00 - 99.99) for (1A5A)LCD Display with Backlight (20mm Digit Height) RS 485 Port (5KV Isolated) MODBUS RTU Protocol & POWER MASTER Software (Optional) for EM-08S (1A5A), EM-08 (20A) SMPS Power Supply (85-265 V ACDC) for EM-08S (1A5A), EM-08 (20A) Auxillary Power Supply (230 V AC) for EM-08 (1A5A), EM-08D
View Complete Details

3 PHASE MULTIFUNCTION POWER METER

  • Applications These MFM's are ideal for Power Distribution Sector, PLC/SCADA, Power& Energy Management, Telemetering for Remote, QC Testing, Energy Audit Local as well as Central Monitoring Systems
  • Ordering Information Model, Input Voltage, Input Current, Input Frequency, System 3P3E4W / 3P2E3W, CTR/PTR (if any), Auxiliary
TRMS Measurments12 Parameters, 68 Values on 44 Pages (SPVR-96)3 Group of 4 digit LCD with Backlight & Annunciations (SPVR-96)12 Parameters, 68 Values on 22 Pages (MFM)4 Rows of 4 Digit Super Bright Red LED Display (MFM)3 Phase 4 WireProgrammable CTR, PTR & Instr. Address, Password & MD PeriodEnergy Import - Export (4 Quadrant Operation)IP54 (For Meter Front)POWER MASTER Software (Optional)RS 485 Port, 5kV Isolated with MODBUS RTU Protocol (Optional)CE Compliance with EN61010-1, EN61326-1Inbuilt memory to store CTR, PTR, Instrument Address, Password & MD PeriodAuto Scroll (5 Sec.) Manual Scroll Display Built in 20 Energy Meters of 8 Digit ResoulationEnergy Retention & Password Protected Energy Reset Facility#Additional features for SPVR-96UMT & SPVR-96UMT and MFM-144x192UMTMax. Demand for KW & KVA with User Selectable Demand Interval 5-30 min.THD for Voltage & CurrentPassword for Protection of Programmable Parameters
View Complete Details

3 PHASE MULTIFUNCTION POWER METER

  • Ordering Information Model, Input Voltage, Input Current, Input Frequency, System 3P3E4W / 3P2E3W, CTR/PTR (if any), Auxiliary Supply and RD485 MODBUS Communication Port (Optional)
10 Paramters, 48 Values on 16 Pages (MFM-96S)10 Parameters, 50 Values on 34 Pages (SPVR-96S & MFM-DIN RAIL)TRMS Measurement3 Phase 3 Wire 3 Phase 4 Wire (User Selectable)CTR, PTR, Inst. Address, Password & Energy Reset (Programmable)Energy Import - Export (4 Quadrant Operation)POWER MASTER Software (Optional)RS485 Port, 5KV Isolated with MODBUS RTU Protocol (Optional)CE Compliance as per EN61010- 1, EN61326- 1Inbuilt Memory to Store CTR, PTR, Inst. Address and PasswordAuto Manual Scroll Display (Programmable)Energy RetentionEnergy Reset Programmable Parameters (Password Protected).
View Complete Details

3 PHASE MULTIFUNCTION POWER METER

  • Ordering Information Model, Input Voltage, Input Current, Input Frequency and RS485 MODBUS Communication (Optional)
TRMS Measurement23 Parameters on 46 Pages4 Rows of 4 Digit Super Bright RED LED Display3 Phase 3 Wire 3 Phase 4 Wire System (User Selectable)Programmable CTR, PTR, Instrument Address, Password and MD PeriodEnergy Import - Export (4 Quadrant Operation)IP54 (For Meter Front)POWER MASTER Software (Optional)RS485 Port, 5KV Isolated with MODBUS RTU Protocol (Optional)CE Compliance with EN61010- 1, EN61326- 1Inbuilt Memory to Store CTR, PTR, Instrument Address, Password and MD periodAuto Scroll (5 sec.) Manual Scroll DisplayBuilt in 20 Energy Meters of 8 Digit ResolutionEnergy Retention and Password Protected Energy Reset FacilityMax. Demand for KW or KVA with user Selectable Demand Interval 5-30 MinutesTHD for Voltage and CurrentPassword for Protection of Programmable ParametersRUN Hours, ON HoursPhase Angle and Phasor Angle MeasurementDisplay Previous EnergiesSet Date and TimeMeasurement of Min. and Max. Voltage and Current Values
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us

Retailer of Measuring Instruments & Equipment from Navi Mumbai, Maharashtra by MECO Instruments Pvt. Ltd.
Post Buy Requirement
MI
Navi Mumbai, Maharashtra, India
Add Review

Our Products

  1. Transducer 8 Products available
  2. Measuring Instruments & Equipment 20 Products available
  3. Transformers 4 Products available
  4. Calibrators 3 Products available
  5. Multimeter 4 Products available
  6. Testing Equipment 9 Products available
  7. Others 10 Products available

Measuring Instruments & Equipment #4494841

SWITCHBOARD METERS

  • Material Case: Complies to DIN 43700, Colour : White, Front Glass : Flat glass on standard models. Anti-glare glass available on request Etc.
These instruments consist of a moving piece of ferro magnetic material, which is under influence of a current carrying fixed coil. Considering the quadratic nature of the deflecting torque, the scale of these instruments is non-linear. Considering the above mentioned operating process, these instruments are ideally suited for measuring TRMS current and voltage in alternating current circuits. Ammeters are mostly used alongwith externally mounted current transformers, though ammeter upto 100A for direct connection are also provided. Voltmeters upto 750V can be provided. Ammeters with over scale suppressed scale of 2xIn and 6xIn to withstand high and very high motor starting currents can also be provided. Accuracy for these meters is applicable only within the nominal working range and not in the overscale range.However please note that all Ammeters can withstand an overload of 10 times the rated range for maximum 5 sec. and 2 times rated currents continuously. When using external current transformer, please ensure that the secondary current value of the CT must be the rated current of the Ammeter i.e., In.
View Complete Details

Solar Power Meter

  • Applications Solar Power Plant, Windows performance - calculate the rate of daylight penetration Physics and optical laboratories Etc.
This instrument is designed to measure Solar Power in the range from 400 to 1100 nanometers. The good Spectral Range, Orientation and Angular detection of meter allow users to conduct the most precise quantitative measurements of Solar Power RadiationSolar Power Measurement with Orientation and Tilt AngleEasy measurement for rate of daylight penetrationAuto change for measuring rangeAuto power off with disable functionInstantaneous display AveMinMax values20 points memorySocket of tripod mountingMagnetic mountBacklit LCD and 4 digits triple display
View Complete Details

Solar Module Analyzer

  • Dimension 257 x 155 x 57 mm (approx.)
  • Environment 5ºC ~ 50ºC, ≤ 85% RH (Operating) , -20ºC ~ 60ºC, ≤ 75% RH (Storage) Etc.
I-V Curve Test for Solar Panel Module CellMax. Solar CellModule Power Cell Power(Pmax) search by Auto-ScanCapability: 60V, 12ABest Resolution: 1mV , 1mAManual Single Point I-V TestMax. Voltage (Vmaxp) at PmaxMax. Current (Imaxp) at PmaxVoltage at Open Circuit (Vopen)Current at Short Circuit (Ishort)I-V Curve with Cursor to Display each Data PointEfficiency (%) Calculation of Solar Panel
View Complete Details

MULTIFUNCTION AUTOMOTIVE METER

2 in 1 Automotive Auto Ranging DMM & Power Probe (MAM6120)3 in 1 Automotive Auto Ranging DMM, Power Probe & Logic ProbeHands - Free Test Leads for Excellent ConvenienceFlashlight for Operation of Automotive DiagnosisAuto Range, Auto Power Off, Low Battery Warning & Data Hold
View Complete Details

Battery Meter

Meco bm63 is a portable battery tester which can check the capacity condition of different types of batteries from 4 to 500ah.the product consists of a dc voltmeter, load resistor and testing clip. The state of the battery is indicated on the meter dial as 'ok'(green), 'weak' (yellow) and 'bad' (red) directly.
View Complete Details

12V BATTERY METER

  • Technical Specifications Rated Voltage of Battery to be Tested : 2, 6, 12V DC, Rated Capacity of Battery to be Tested : 2 - 200Ah Etc.
MECO ABM18 is a portable Automobile Battery Tester which can check the capacity condition of different types of Motorcycle and Motorcar batteries from 2 to 200Ah. The product consists of a DC Voltmeter, Load Resistor and Testing Clip. The state of the battery is indicated on the meter dial as 'FULLUP' (White), 'NORMAL' (Green), 'RECHARGE' (Yellow), 'DISCHARGE' (Red) directly.
View Complete Details

3 PHASE ADAPTER POWER METER

  • General Specifications : Numerical Dual Display : 4 Digit 999 Count LCD, Battery Life : 32 hours approx. Etc.
4 Digit LCD, 9999 Count, AutorangingData Hold, Auto Power OffDual display KW + PF, KVA + , KW + HP, KW + KVAR, V + A, A + Hz, V + HzCable of Diameter upto 43mm Busbar upto 65mm x 16mm3 Phase Adapter.
View Complete Details

3 PHASE AUTOMATIC COMPUTATION POWER METER

  • General Specification Numerical Dual Display : 4 Digit 999 Count LCD, Battery Life : 32 hours approx. Etc
4 Digit LCD, 9999 Count, AutorangingData Hold, Auto Power OffDual Display KW + HP, KW + PF, KW + KVAR, KVA + , V + A, A + Hz, V + HzCable of Diameter upto 43mm Busbar upto 65mm x 16mm.
View Complete Details

CLAMP TRMS POWER METER

  • Feature TRMS Measurement, 4 Digit LCD, 9999 Count, Autoranging Etc.
Check Motors and Compressors, Check for Energized Circuits & Loads, Ideal for Electrical Energy Audit of Heating, Ventilation & Aircom Systems (HVAC, To Identify Low Voltage Control Signal, To Identify Power Sources, 1 3 (3p3w 3p4w) Power Calculations, Evaluate Electrical Contacts, Verify the Stability of Voltage
View Complete Details

3 AXIS ELECTROSMOG METER

Frequency Range 50MHz to 3.5GHzFor Isotropic Measurement of Electro Magnetic FieldsNon-Directional (Isotropic) Measurement with Three - Channel Measuremen SensorHigh Dynamic Range due to Three Channel Digital Results ProcessingConfigurable Alarm Threshold and memory FunctionEasy and Safety to use
View Complete Details

3 AXIS ELECTROSMOG METER

Frequency Range 10 MHz to 8.0 GHzTriaxial Isotropic Measurement of EMFNon-Directional (Isotropic) Measurement with Three - Channel Measurement SensorHigh Dynamic RangeConfigurable Alarm Threshold and Memory FunctionEasy & Safety to Use
View Complete Details

Lcr Meter

  • Dimension 193 x 93 x 48mm (approx.)
  • Weight 395gms (approx.)
  • AC Adaptor Input : 220V (1 ± 10%), 50Hz (1 ± 5%) : Output 12V DC
Basic measurement accuracy 0.1% & speed upto 10 meas secLarge LCD display with bright white backlightUltra low power consumption, battery powered for 2 hours of continuous useAutomatic identification function (Ai).Percentage display & 4 tolerance comparator : 1%, 5%, 10% & 20%9V battery & External power supplyAutomatic correction function with datahold, max. min. average recordingUtility function configuration & current setup recovery after power offStandard Mini-USB interface, SCPI compatibleAuto power OffConstant output impedance : 100 ohm
View Complete Details

Transformer Turns Ratio Meter

  • Accesssories Test Leads x 1 Pair, Alligator Clips x 4, Rechargeable Lithium Battery x 1, Instruction Manual x 1, AC Adaptor x 1, Power Cord x 1, Software CD & Manual x 1, Carrying Bag x 1.
Transformer is a very important Element in the Electric Power Distribution System. It needs to be maintained from time to time to Guarantee Smooth Power Supply at Consumer end. MECO TTR8100 is Portable instrument for accurate measurement of 1-Phase & 3-Phase Transformer VT CT Turned Ratio, Excitation Voltage, Current, Phase Angle and Deviation. TTR8100 ensure the Correct Turn Ratio & Quality of the Transformer. It Check Live Test Point, Short Circuit, Open Circuit and Revers Polarity before each measurement.
View Complete Details

3 PHASE VIF METER

  • Ordering Information Model, Input Voltage, Input Current, Input Frequency, System 3R3E4W and Auxiliary Supply
TRMS MeasurementsMeasures V, A, Hz, Run, Hour, On Hour and RPMRUN Hour On Hour (Max.99999 Hours, 59 Minutes, 59 Seconds)RUN Hour On Hour Reset FacilityAuto Scroll Manual Scroll Display3 Phase 4 Wire3 Rows of 3 Digits Super Bright Red LED DisplayProgrammable CTR, PTR, Number of Pole SettingAuto Indication for 'KV' and 'KA'Auto Selection of Decimal Point
View Complete Details

Switchboard Instruments Multifunction Meters

12 Parameters, 68 Values on 22 Pages3 Phase 4 Wire Complete with Standard AccessoriesProgrammable CTR & PTR, Instr. Address, Password & MD PeriodColoured Input Terminals for Phase IdentificationPOWER MASTER Software Datalogging, Tabulation & GraphsBuilt-In 20 Energy Meter of 8 Digit ResolutionTRMS MeasurementRugged & Portable CasingRS 485 Port, 5kV Isolated Port (Standard)Max. Demand, THD, Password Protection & Auto Scroll FacilitiesEnergy Retention & Energy Reset FacilityClamp-On CT's for Current InputFull Annunicators on Display
View Complete Details

1 PHASE MULTIFUNCTION APPLIANCE METER

  • Feature Measures V, A, PF, Hz, KW, KVA, KVAr, Kwh, KVAh & KVArh, Auto / Manual Scroll Display (User Selectable) Etc.
Appliances Testing (AC, Refrigerator, Washing Machine, Air Cooler, Microwave Oven etc.)LED Light TestingCan be given to field technicians in their tool kitAt the point of sale to demonstrate energy efficiency of your product over competitionCan be used by R & D Dept in Designing Energy Efficient ProductsStudy of Energy Efficiency of Electrical EquipmentProduct Quality TestingEnergy Audit and Plant MaintenanceBuilding Management SystemsPower Management
View Complete Details

1 PHASE MULTIFUNCTION METER

  • Application Appliance Testing, Energy Audit Testing, Studying Energy Efficiency of Electrical Equiptment, Generator / Motor Characteristics Etc;
10 Parameters on 10 Display PagesMeasures V, A, PF, Hz, KW, KVA, KVAr, KWh, KVAh and KVArhAuto Manual Scroll Display (User Selectable)Reduce Panel Space & Wiring TimePortable Type, Desk Top Case with Tilt Stand for EM-08DState of the Art Microcontroller DesignTRMS MeasurmentIdeal for Testing of Electrical AppliancesUser Programmable CT Ratio (1.00 - 99.99) for (1A5A)LCD Display with Backlight (20mm Digit Height) RS 485 Port (5KV Isolated) MODBUS RTU Protocol & POWER MASTER Software (Optional) for EM-08S (1A5A), EM-08 (20A) SMPS Power Supply (85-265 V ACDC) for EM-08S (1A5A), EM-08 (20A) Auxillary Power Supply (230 V AC) for EM-08 (1A5A), EM-08D
View Complete Details

3 PHASE MULTIFUNCTION POWER METER

  • Applications These MFM's are ideal for Power Distribution Sector, PLC/SCADA, Power& Energy Management, Telemetering for Remote, QC Testing, Energy Audit Local as well as Central Monitoring Systems
  • Ordering Information Model, Input Voltage, Input Current, Input Frequency, System 3P3E4W / 3P2E3W, CTR/PTR (if any), Auxiliary
TRMS Measurments12 Parameters, 68 Values on 44 Pages (SPVR-96)3 Group of 4 digit LCD with Backlight & Annunciations (SPVR-96)12 Parameters, 68 Values on 22 Pages (MFM)4 Rows of 4 Digit Super Bright Red LED Display (MFM)3 Phase 4 WireProgrammable CTR, PTR & Instr. Address, Password & MD PeriodEnergy Import - Export (4 Quadrant Operation)IP54 (For Meter Front)POWER MASTER Software (Optional)RS 485 Port, 5kV Isolated with MODBUS RTU Protocol (Optional)CE Compliance with EN61010-1, EN61326-1Inbuilt memory to store CTR, PTR, Instrument Address, Password & MD PeriodAuto Scroll (5 Sec.) Manual Scroll Display Built in 20 Energy Meters of 8 Digit ResoulationEnergy Retention & Password Protected Energy Reset Facility#Additional features for SPVR-96UMT & SPVR-96UMT and MFM-144x192UMTMax. Demand for KW & KVA with User Selectable Demand Interval 5-30 min.THD for Voltage & CurrentPassword for Protection of Programmable Parameters
View Complete Details

3 PHASE MULTIFUNCTION POWER METER

  • Ordering Information Model, Input Voltage, Input Current, Input Frequency, System 3P3E4W / 3P2E3W, CTR/PTR (if any), Auxiliary Supply and RD485 MODBUS Communication Port (Optional)
10 Paramters, 48 Values on 16 Pages (MFM-96S)10 Parameters, 50 Values on 34 Pages (SPVR-96S & MFM-DIN RAIL)TRMS Measurement3 Phase 3 Wire 3 Phase 4 Wire (User Selectable)CTR, PTR, Inst. Address, Password & Energy Reset (Programmable)Energy Import - Export (4 Quadrant Operation)POWER MASTER Software (Optional)RS485 Port, 5KV Isolated with MODBUS RTU Protocol (Optional)CE Compliance as per EN61010- 1, EN61326- 1Inbuilt Memory to Store CTR, PTR, Inst. Address and PasswordAuto Manual Scroll Display (Programmable)Energy RetentionEnergy Reset Programmable Parameters (Password Protected).
View Complete Details

3 PHASE MULTIFUNCTION POWER METER

  • Ordering Information Model, Input Voltage, Input Current, Input Frequency and RS485 MODBUS Communication (Optional)
TRMS Measurement23 Parameters on 46 Pages4 Rows of 4 Digit Super Bright RED LED Display3 Phase 3 Wire 3 Phase 4 Wire System (User Selectable)Programmable CTR, PTR, Instrument Address, Password and MD PeriodEnergy Import - Export (4 Quadrant Operation)IP54 (For Meter Front)POWER MASTER Software (Optional)RS485 Port, 5KV Isolated with MODBUS RTU Protocol (Optional)CE Compliance with EN61010- 1, EN61326- 1Inbuilt Memory to Store CTR, PTR, Instrument Address, Password and MD periodAuto Scroll (5 sec.) Manual Scroll DisplayBuilt in 20 Energy Meters of 8 Digit ResolutionEnergy Retention and Password Protected Energy Reset FacilityMax. Demand for KW or KVA with user Selectable Demand Interval 5-30 MinutesTHD for Voltage and CurrentPassword for Protection of Programmable ParametersRUN Hours, ON HoursPhase Angle and Phasor Angle MeasurementDisplay Previous EnergiesSet Date and TimeMeasurement of Min. and Max. Voltage and Current Values
View Complete Details
Tell Us What are you looking for? Will call you back

Contact Us