MIRDON HACKSAW BLADES are available in All Hard (Low Alloy) and High Speed Steel quality variants.

HIGH SPEED STEEL TOOL BITS (Square and Round) are also available in 5% and 10% Cobalt compositions.

MATRIX Make ROUND TOOL BITS & ROUND HEAD PUNCHES (Knock Out Pins) are available in M2, M35 & T42 grades.

The sizes available range from 1x75mm up to 20x200mm for Round Bits &

From 2x50mm up to 20x150mm (with Head Dia +1mm) for Round Head Punches. 

HSS GEAR HOBS for Spur and Helical Gears in Machine Relieved and Ground Relieved profiles are available with Bore and Keyway or with End Drive Slot in Single and Multi Start pitches in M2 and M35 grades. 

In addition to above, the following tools are also supplied as per customer’s specifications.

• HSS Involute Gear Cutters
• Gear Shaper Cutters
• Chain Sprocket Hobs
• Spline Hobs and
• Timing Pulley Hobs 

PUSH & PULL TYPE BROACHES are also available in M2 grade in Splines, Internal Hole and Keyway profiles. 

Brands available are: STC/SHB 

Heat Treated Lanco Type Revolving Die Heads are available for the application to the hand operated semi automatic threading machines.

Brand Available is Nbeson

 The Threading Capacity range for the Die Heads supplied is as under:

HSS Metal Slitting saws are available in COARSE AND FINE TEETH with and without keyways in above range of sizes: 

Used for Milling Dove-Tail, V-Slots and Chamfers, three types of Angle Cutters; viz. Double Angle, Single Angle & Double Equal Angle (All Right Hand in standard practice) are supplied in the above range of sizes :

THREAD PLUG & RING GAUGES are available in ISO Metric Thread Forms.

Brand available is BAKER 

DEAD CENTERS with Plain Male Point and Carbide Tipped Point are supplied against order in Standard, Stub and Extended point configurations in Morse Tapers MT-1 to MT-6.

REVOLVING (LIVE) CENTERS are available in Standard, Extra Heavy Duty, Super Extra Heavy Duty and Jumbo Extra Heavy Duty Models in Morse Tapers MT-1 to MT-7.

Brand available is TURNMAX

COVENTRY DIE HEAD (CDH) CHASERS suitable for 1/2", 3/4", 1”, 1.1/4”, 1.1/2” and 2” CD Heads are available in all Standard Thread Forms.

TANGENTIAL CHASERS are generally supplied in 3”x1.3/64” and 4”x1.3/64” sections in standard metric (mm) and inch (TPI) sizes.

Brand available for the above types of chasers is NBESON. 

ADDISON Make HSS PARALLEL & TAPER SHANK TWIST DRILLS are available in Jobber, Stub and Long Series(P/S) and Long/Extra Long Series (T/S).

HSS GROUND THREAD TAPS; viz. Hand Taps, Machine Taps & Nut Taps are also available.

NBESON Make HSS TAPS are also available. 

Side & Face Cutters are available in STRAIGHT & STAGGERED TEETH in the above range of sizes:

Convex and Concave Cutters are available in the above range of sizes:

MIRDON HACKSAW BLADES are available in All Hard (Low Alloy) and High Speed Steel quality variants.

HIGH SPEED STEEL TOOL BITS (Square and Round) are also available in 5% and 10% Cobalt compositions.

MATRIX Make ROUND TOOL BITS & ROUND HEAD PUNCHES (Knock Out Pins) are available in M2, M35 & T42 grades.

The sizes available range from 1x75mm up to 20x200mm for Round Bits &

From 2x50mm up to 20x150mm (with Head Dia +1mm) for Round Head Punches. 

HSS GEAR HOBS for Spur and Helical Gears in Machine Relieved and Ground Relieved profiles are available with Bore and Keyway or with End Drive Slot in Single and Multi Start pitches in M2 and M35 grades. 

In addition to above, the following tools are also supplied as per customer’s specifications.

• HSS Involute Gear Cutters
• Gear Shaper Cutters
• Chain Sprocket Hobs
• Spline Hobs and
• Timing Pulley Hobs 

PUSH & PULL TYPE BROACHES are also available in M2 grade in Splines, Internal Hole and Keyway profiles. 

Brands available are: STC/SHB 

Heat Treated Lanco Type Revolving Die Heads are available for the application to the hand operated semi automatic threading machines.

Brand Available is Nbeson

 The Threading Capacity range for the Die Heads supplied is as under:

HSS Metal Slitting saws are available in COARSE AND FINE TEETH with and without keyways in above range of sizes: 

Used for Milling Dove-Tail, V-Slots and Chamfers, three types of Angle Cutters; viz. Double Angle, Single Angle & Double Equal Angle (All Right Hand in standard practice) are supplied in the above range of sizes :

THREAD PLUG & RING GAUGES are available in ISO Metric Thread Forms.

Brand available is BAKER 

DEAD CENTERS with Plain Male Point and Carbide Tipped Point are supplied against order in Standard, Stub and Extended point configurations in Morse Tapers MT-1 to MT-6.

REVOLVING (LIVE) CENTERS are available in Standard, Extra Heavy Duty, Super Extra Heavy Duty and Jumbo Extra Heavy Duty Models in Morse Tapers MT-1 to MT-7.

Brand available is TURNMAX

COVENTRY DIE HEAD (CDH) CHASERS suitable for 1/2", 3/4", 1”, 1.1/4”, 1.1/2” and 2” CD Heads are available in all Standard Thread Forms.

TANGENTIAL CHASERS are generally supplied in 3”x1.3/64” and 4”x1.3/64” sections in standard metric (mm) and inch (TPI) sizes.

Brand available for the above types of chasers is NBESON. 

ADDISON Make HSS PARALLEL & TAPER SHANK TWIST DRILLS are available in Jobber, Stub and Long Series(P/S) and Long/Extra Long Series (T/S).

HSS GROUND THREAD TAPS; viz. Hand Taps, Machine Taps & Nut Taps are also available.

NBESON Make HSS TAPS are also available. 

Side & Face Cutters are available in STRAIGHT & STAGGERED TEETH in the above range of sizes:

Convex and Concave Cutters are available in the above range of sizes: