Product / Services
Post Buy Requirement
Measurment Systems of Liquids & Gases
Measurment Systems of Liquids & Gases
Pune, Maharashtra, India
Add Review
Call Now Call Now

Our Products

  1. Gas Flowmeter 11 Products available
  2. Measuring Instruments & Equipment 4 Products available
  3. Flow Meters 4 Products available
  4. Sensors 3 Products available
  5. Others 4 Products available

Gas Flowmeter #1413028

Prepaid Gas Meter

Prepaid Gas Meter
  • Min. Order (MOQ) 10 Piece(s)
  • Steel 1", 2", 3", 1/2", 1/4", 4", 6"
Prepaid gas meters.

Additional Information:

Payment Terms : T/T

Delivery Time : Kindly Contact Us

View Complete Details
Ask Latest Price & Details
Electronics Gas Flowmeter

Electronics Gas Flowmeter
  • Min. Order (MOQ) 1 Piece(s)
within the working range of the meter the rotor spinsproportional to the actual velocity of gaseous materialflowing. a pick-up coil produces an electrical signal aseach blade crosses through its low magnetic or rffield. this signal is amplified and conditioned by atransmitter or fed directly into a rate/totalizer, and representsthe actual cubic feet per minute (acfm) flowingthrough the meter. the k-factor is stenciled on themeter body in pulses per actual cubic feet (p/acf).because gases are compressible, most people desireto measure the equivalent amount of gas corrected forthe line pressure and temperature to standard cubicfeet per minute (scfm at 60f, 14.69 psia). if theflow temperature and pressure are relatively constant, then a simple correction can be calculated to shift thek-factor from p/acf to p/scf and a simple totalizer(measurement systems india make ) may be used. when flowtemperature and pressure are not constant, a flow computer. specificationslinearity 11.0%/0.5%repeatability 10.25%maximum over-range125% of flow rate for intermittent periodsfrequency output0 to 1, 100 hzvoltage outputapproximately 100 mv@ 100 hz to 1.5 v (rms)@1, 000 hz.pressure drop0.5 psi at 100% of flow rangepressure rating we manufacture flowmeters for most pressures. installationvertical or horizontal (any direction).materials of constructionbody: 316 l stainless steel.flanges: 316 stainless steelrotor: 431 stainless steel.rotor shaft/bearings:standard: tungsten carbide v-cupcartridge frame retainer: 302 stainless steelcartridge frame: 316 l stainless steel.temperature range:meter with bearing structure of:standard: tungsten carbide: -40f to 300f (-40c to 149c).for other temperatures consult factory.

Additional Information:

Payment Terms : L/C, D/A, D/P, T/T, Western Union, ,

Packaging Details : Gas Meter in One Wooden Box With Flow Totaliser.

Delivery Time : Kindly Contact Us

View Complete Details
Ask Latest Price & Details
Wet Gas Meter

Wet Gas Meter
  • Min. Order (MOQ) 1 Piece(s)
  • Steel 1", 2", 3", 1/2", 1/4", 4", 6"
We offer Wet Gas Meter within the working range of the meter the rotor spins proportional to the actual velocity of gaseous material flowing. A pick-up sensor produces an electrical signal as each blade crosses through its low magnetic or rffield. This signal is amplified and conditioned by atransmitter or fed directly into a rate/totalizer, and represents the actual cubic feet per minute (acfm) flowingthrough the meter. The k-factor is stenciled on the meter body in pulses per actual cubic feet (p/acf). Because gases are compressible, most people desireto measure the equivalent amount of gas corrected forthe line pressure and temperature to standard cubicfeet per minute (scfm at 60f, 14.69 psia). If theflow temperature and pressure are relatively constant, then a simple correction can be calculated to shift thek-factor from p/acf to p/scf and a simple totalizer(measurement systems india make ) may be used. When flowtemperature and pressure are not constant, a flow computer. specificationslinearity 11.0%/0.5%repeatability 10.25%maximum over-range125% of flow rate for intermittent periodsfrequency output0 to 1, 100 hzvoltage outputapproximately 100 mv@ 100 hz to 1.5 v (rms)@1, 000 hz. Pressure drop0.5 psi at 100% of flow rangepressure rating we manufacture flowmeters for most pressures. installationvertical or horizontal (any direction). Materials of constructionbody: 316 l stainless steel. Flanges: 316 stainless steelrotor: 431 stainless steel. Rotor shaft/bearings:standard: tungsten carbide v-cupcartridge frame retainer: 302 stainless steelcartridge frame: 316 l stainless steel. Temperature range:meter with bearing structure of:standard: tungsten carbide: -40f to 300f (-40c to 149c). For other temperatures consult factory.

Additional Information:

Payment Terms : T/T

Packaging Details : Gas Meter in One Wooden Box With Flow Totaliser.

Delivery Time : Kindly Contact Us

View Complete Details
Ask Latest Price & Details
Natural Gas Meter

Natural Gas Meter
  • Min. Order (MOQ) 1 Piece(s)
  • Steel 1", 2", 3", 1/2", 1/4", 4", 6"
We have Natural Gas Meter within the working range of the meter the rotor spins proportional to the actual velocity of gaseous materialflowing. A pick-up sensor produces an electrical signal aseach blade crosses through its low magnetic or rf field. This signal is amplified and conditioned by a transmitter or fed directly into a rate/totalizer, and representsthe actual cubic feet per minute (acfm) flowingthrough the meter. The k-factor is stenciled on themeter body in pulses per actual cubic feet (p/acf). Because gases are compressible, most people desireto measure the equivalent amount of gas corrected forthe line pressure and temperature to standard cubicfeet per minute (scfm at 60f, 14.69 psia). If theflow temperature and pressure are relatively constant, then a simple correction can be calculated to shift thek-factor from p/acf to p/scf and a simple totalizer(measurement systems india make ) may be used. When flowtemperature and pressure are not constant, a flow computer. specificationslinearity 11.0%/0.5%repeatability 10.25%maximum over-range125% of flow rate for intermittent periodsfrequency output0 to 1, 100 hzvoltage outputapproximately 100 mv@ 100 hz to 1.5 v (rms)@1, 000 hz. Pressure drop0.5 psi at 100% of flow rangepressure rating we manufacture flowmeters for most pressures. installationvertical or horizontal (any direction). Materials of constructionbody: 316 l stainless steel. Flanges: 316 stainless steelrotor: 431 stainless steel. Rotor shaft/bearings:standard: tungsten carbide v-cupcartridge frame retainer: 302 stainless steelcartridge frame: 316 l stainless steel. Temperature range:meter with bearing structure of:standard: tungsten carbide: -40f to 300f (-40c to 149c). For other temperatures consult factory.

Additional Information:

Payment Terms : T/T

Packaging Details : Gas Meter in One Wooden Box With Flow Totaliser.

Delivery Time : Kindly Contact Us

View Complete Details
Ask Latest Price & Details
Gas Meters

Gas Meters
  • Min. Order (MOQ) 1 Piece(s)
  • Steel 1", 2", 3", 1/2", 1/4", 4", 6"
We are offering Gas Meters, within the working range of the meter the rotor spinsproportional to the actual velocity of gaseous materialflowing. a pick-up coil produces an electrical signal aseach blade crosses through its low magnetic or rffield. this signal is amplified and conditioned by atransmitter or fed directly into a rate/totalizer, and representsthe actual cubic feet per minute (acfm) flowingthrough the meter. the k-factor is stenciled on themeter body in pulses per actual cubic feet (p/acf).because gases are compressible, most people desireto measure the equivalent amount of gas corrected forthe line pressure and temperature to standard cubicfeet per minute (scfm at 60f, 14.69 psia). if theflow temperature and pressure are relatively constant, then a simple correction can be calculated to shift thek-factor from p/acf to p/scf and a simple totalizer(measurement systems india make ) may be used. when flowtemperature and pressure are not constant, a flow computer. specificationslinearity 11.0%/0.5%repeatability 10.25%maximum over-range125% of flow rate for intermittent periodsfrequency output0 to 1, 100 hzvoltage outputapproximately 100 mv@ 100 hz to 1.5 v (rms)@1, 000 hz.pressure drop0.5 psi at 100% of flow rangepressure rating we manufacture flowmeters for most pressures. installationvertical or horizontal (any direction).materials of constructionbody: 316 l stainless steel.flanges: 316 stainless steelrotor: 431 stainless steel.rotor shaft/bearings:standard: tungsten carbide v-cupcartridge frame retainer: 302 stainless steelcartridge frame: 316 l stainless steel.temperature range:meter with bearing structure of:standard: tungsten carbide: -40f to 300f (-40c to 149c).for other temperatures consult factory.

Additional Information:

Payment Terms : T/T

Packaging Details : Gas Meter in One Wooden Box With Flow Totaliser.

Delivery Time : Kindly Contact Us

View Complete Details
Ask Latest Price & Details
Digital Gas Flow Meter

Digital Gas Flow Meter
  • Min. Order (MOQ) 1 Piece(s)
  • Steel 1", 2", 3", 1/2", 1/4", 4", 6"
within the working range of the meter the rotor spinsproportional to the actual velocity of gaseous materialflowing. a pick-up sensor produces an electrical signal aseach blade crosses through its low magnetic or rffield. this signal is amplified and conditioned by atransmitter or fed directly into a rate/totalizer, and representsthe actual cubic feet per minute (acfm) flowingthrough the meter. the k-factor is stenciled on themeter body in pulses per actual cubic feet (p/acf).because gases are compressible, most people desireto measure the equivalent amount of gas corrected forthe line pressure and temperature to standard cubicfeet per minute (scfm at 60f, 14.69 psia). if theflow temperature and pressure are relatively constant, then a simple correction can be calculated to shift thek-factor from p/acf to p/scf and a simple totalizer(measurement systems india make ) may be used. when flowtemperature and pressure are not constant, a flow computer. specificationslinearity 11.0%/0.5%repeatability 10.25%maximum over-range125% of flow rate for intermittent periodsfrequency output0 to 1, 100 hzvoltage outputapproximately 100 mv@ 100 hz to 1.5 v (rms)@1, 000 hz.pressure drop0.5 psi at 100% of flow rangepressure rating we manufacture flowmeters for most pressures. installationvertical or horizontal (any direction).materials of constructionbody: 316 l stainless steel.flanges: 316 stainless steelrotor: 431 stainless steel.rotor shaft/bearings:standard: tungsten carbide v-cupcartridge frame retainer: 302 stainless steelcartridge frame: 316 l stainless steel.temperature range:meter with bearing structure of:standard: tungsten carbide: -40f to 300f (-40c to 149c).for other temperatures consult factory.

Additional Information:

Payment Terms : T/T

Delivery Time : Kindly Contact Us

View Complete Details
Ask Latest Price & Details
Lpg Gas Meter

Lpg Gas Meter
  • Min. Order (MOQ) 1 Piece(s)
  • Steel 1", 2", 3", 1/2", 1/4", 4", 6"
within the working range of the meter the rotor spinsproportional to the actual velocity of gaseous materialflowing. a pick-up sensor produces an electrical signal aseach blade crosses through its low magnetic or rffield. this signal is amplified and conditioned by atransmitter or fed directly into a rate/totalizer, and representsthe actual cubic feet per minute (acfm) flowingthrough the meter. the k-factor is stenciled on themeter body in pulses per actual cubic feet (p/acf).because gases are compressible, most people desireto measure the equivalent amount of gas corrected forthe line pressure and temperature to standard cubicfeet per minute (scfm at 60f, 14.69 psia). if theflow temperature and pressure are relatively constant, then a simple correction can be calculated to shift thek-factor from p/acf to p/scf and a simple totalizer(measurement systems india make ) may be used. when flowtemperature and pressure are not constant, a flow computer. specificationslinearity 11.0%/0.5%repeatability 10.25%maximum over-range125% of flow rate for intermittent periodsfrequency output0 to 1, 100 hzvoltage outputapproximately 100 mv@ 100 hz to 1.5 v (rms)@1, 000 hz.pressure drop0.5 psi at 100% of flow rangepressure rating we manufacture flowmeters for most pressures. installationvertical or horizontal (any direction).materials of constructionbody: 316 l stainless steel.flanges: 316 stainless steelrotor: 431 stainless steel.rotor shaft/bearings:standard: tungsten carbide v-cupcartridge frame retainer: 302 stainless steelcartridge frame: 316 l stainless steel.temperature range:meter with bearing structure of:standard: tungsten carbide: -40f to 300f (-40c to 149c).for other temperatures consult factory.

Additional Information:

Payment Terms : T/T

Packaging Details : Gas Meter in One Wooden Box With Flow Totaliser.

Delivery Time : Kindly Contact Us

View Complete Details
Ask Latest Price & Details
Gas Meter

Gas Meter
  • Min. Order (MOQ) 1 Piece(s)
  • Steel 1", 2", 3", 1/2", 1/4", 4", 6"
We can supply Gas Meter within the working range of the meter the rotor spins proportional to the actual velocity of gaseous material flowing. A pick-up sensor produces an electrical signal as each blade crosses through its low magnetic or rffield. This signal is amplified and conditioned by a transmitter or fed directly into a rate/totalizer, and represents the actual cubic feet per minute (acfm) flowingthrough the meter. The k-factor is stenciled on the meter body in pulses per actual cubic feet (p/acf). Because gases are compressible, most people desireto measure the equivalent amount of gas corrected forthe line pressure and temperature to standard cubicfeet per minute (scfm at 60f, 14.69 psia). If theflow temperature and pressure are relatively constant, then a simple correction can be calculated to shift thek-factor from p/acf to p/scf and a simple totalizer(measurement systems india make ) may be used. When flowtemperature and pressure are not constant, a flow computer. specificationslinearity 11.0%/0.5%repeatability 10.25%maximum over-range125% of flow rate for intermittent periodsfrequency output0 to 1, 100 hzvoltage outputapproximately 100 mv@ 100 hz to 1.5 v (rms)@1, 000 hz. Pressure drop0.5 psi at 100% of flow rangepressure rating we manufacture flowmeters for most pressures. installationvertical or horizontal (any direction). Materials of constructionbody: 316 l stainless steel. Flanges: 316 stainless steelrotor: 431 stainless steel. Rotor shaft/bearings:standard: tungsten carbide v-cupcartridge frame retainer: 302 stainless steelcartridge frame: 316 l stainless steel. Temperature range:meter with bearing structure of:standard: tungsten carbide: -40f to 300f (-40c to 149c). For other temperatures consult factory.

Additional Information:

Payment Terms : T/T

Packaging Details : Gas Meter in One Wooden Box With Flow Totaliser.

Delivery Time : Kindly Contact Us

View Complete Details
Ask Latest Price & Details
Diaphragm Gas Meter

Diaphragm Gas Meter
  • Min. Order (MOQ) 1 Piece(s)
  • Steel 1", 2", 3", 1/2", 1/4", 4", 6"
We have Diaphragm Gas Meter within the working range of the meter the rotor spins proportional to the actual velocity of gaseous materialflowing. A pick-up sensor produces an electrical signal aseach blade crosses through its low magnetic or rf field. This signal is amplified and conditioned by a transmitter or fed directly into a rate/totalizer, and representsthe actual cubic feet per minute (acfm) flowingthrough the meter. The k-factor is stenciled on themeter body in pulses per actual cubic feet (p/acf). Because gases are compressible, most people desireto measure the equivalent amount of gas corrected forthe line pressure and temperature to standard cubicfeet per minute (scfm at 60f, 14.69 psia). If theflow temperature and pressure are relatively constant, then a simple correction can be calculated to shift thek-factor from p/acf to p/scf and a simple totalizer(measurement systems india make ) may be used. When flowtemperature and pressure are not constant, a flow computer. specificationslinearity 11.0%/0.5%repeatability 10.25%maximum over-range125% of flow rate for intermittent periodsfrequency output0 to 1, 100 hzvoltage outputapproximately 100 mv@ 100 hz to 1.5 v (rms)@1, 000 hz. Pressure drop0.5 psi at 100% of flow rangepressure rating we manufacture flowmeters for most pressures. installationvertical or horizontal (any direction). Materials of constructionbody: 316 l stainless steel. Flanges: 316 stainless steelrotor: 431 stainless steel. Rotor shaft/bearings:standard: tungsten carbide v-cupcartridge frame retainer: 302 stainless steelcartridge frame: 316 l stainless steel. Temperature range:meter with bearing structure of:standard: tungsten carbide: -40f to 300f (-40c to 149c). For other temperatures consult factory.

Additional Information:

Payment Terms : T/T

Packaging Details : Gas Meter in One Wooden Box With Flow Totaliser.

Delivery Time : Kindly Contact Us

View Complete Details
Ask Latest Price & Details
Gas Flow Meters

Gas Flow Meters
  • Min. Order (MOQ) 1 Piece(s)
  • Steel 1", 2", 3", 1/2", 1/4", 4", 6"
We have Gas Flow Meters within the working range of the meter the rotor spins proportional to the actual velocity of gaseous material flowing. A pick-up coil produces an electrical signal as each blade crosses through its low magnetic or rffield. This signal is amplified and conditioned by a transmitter or fed directly into a rate/totalizer, and represents the actual cubic feet per minute (acfm) flowingthrough the meter. The k-factor is stenciled on the meter body in pulses per actual cubic feet (p/acf). Because gases are compressible, most people desireto measure the equivalent amount of gas corrected forthe line pressure and temperature to standard cubicfeet per minute (scfm at 60f, 14.69 psia). If the flow temperature and pressure are relatively constant, then a simple correction can be calculated to shift thek-factor from p/acf to p/scf and a simple totalizer(measurement systems india make ) may be used. When flowtemperature and pressure are not constant, a flow computer. specificationslinearity 11.0%/0.5%repeatability 10.25%maximum over-range125% of flow rate for intermittent periodsfrequency output0 to 1, 100 hzvoltage outputapproximately 100 mv@ 100 hz to 1.5 v (rms)@1, 000 hz. Pressure drop0.5 psi at 100% of flow rangepressure rating we manufacture flowmeters for most pressures. installationvertical or horizontal (any direction). Materials of constructionbody: 316 l stainless steel. Flanges: 316 stainless steelrotor: 431 stainless steel. Rotor shaft/bearings:standard: tungsten carbide v-cupcartridge frame retainer: 302 stainless steelcartridge frame: 316 l stainless steel. Temperature range:meter with bearing structure of:standard: tungsten carbide: -40f to 300f (-40c to 149c). For other temperatures consult factory.

Additional Information:

Payment Terms : T/T

Packaging Details : Gas Meter in One Wooden Box With Flow Totaliser.

Delivery Time : Kindly Contact Us

View Complete Details
Ask Latest Price & Details
Gas Flow Meter

Gas Flow Meter
  • Min. Order (MOQ) 1 Piece(s)
  • Steel 1", 2", 3", 1/2", 1/4", 4", 6"
We offer Gas Flow Meter, within the working range of the meter the rotor spinsproportional to the actual velocity of gaseous materialflowing. a pick-up coil produces an electrical signal aseach blade crosses through its low magnetic or rffield. this signal is amplified and conditioned by atransmitter or fed directly into a rate/totalizer, and representsthe actual cubic feet per minute (acfm) flowingthrough the meter. the k-factor is stenciled on themeter body in pulses per actual cubic feet (p/acf).because gases are compressible, most people desireto measure the equivalent amount of gas corrected forthe line pressure and temperature to standard cubicfeet per minute (scfm at 60f, 14.69 psia). if theflow temperature and pressure are relatively constant, then a simple correction can be calculated to shift thek-factor from p/acf to p/scf and a simple totalizer(measurement systems india make ) may be used. when flowtemperature and pressure are not constant, a flow computer. specificationslinearity 11.0%/0.5%repeatability 10.25%maximum over-range125% of flow rate for intermittent periodsfrequency output0 to 1, 100 hzvoltage outputapproximately 100 mv@ 100 hz to 1.5 v (rms)@1, 000 hz.pressure drop0.5 psi at 100% of flow rangepressure rating we manufacture flowmeters for most pressures. installationvertical or horizontal (any direction).materials of constructionbody: 316 l stainless steel.flanges: 316 stainless steelrotor: 431 stainless steel.rotor shaft/bearings:standard: tungsten carbide v-cupcartridge frame retainer: 302 stainless steelcartridge frame: 316 l stainless steel.temperature range:meter with bearing structure of:standard: tungsten carbide: -40f to 300f (-40c to 149c).for other temperatures consult factory.

Additional Information:

Payment Terms : T/T

Packaging Details : Gas Meter in One Wooden Box With Flow Totaliser.

Delivery Time : Kindly Contact Us

View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.
Retailer of Gas Flowmeter from Pune, Maharashtra by Measurment Systems of Liquids & Gases
Product / Services
Post Buy Requirement
Measurment Systems of Liquids & Gases

Measurment Systems of Liquids & Gases
Alandi, Pune, Maharashtra

Add Review
Call Now Call Now

Our Products

  1. Gas Flowmeter 11 Products available
  2. Measuring Instruments & Equipment 4 Products available
  3. Flow Meters 4 Products available
  4. Sensors 3 Products available

  5. High Pressure Flowmeters

    1 Products available

  6. Water Flowmeter

    1 Products available

  7. Mass Flowmeters

    1 Products available

Gas Flowmeter

Gas Flowmeter In Following Types: 1.Turbine Type Gas Flowmeters 2.Gas Flowmeters In Venturi Type 3.Gas Flowmeter in Differential Pressure Type 4.Gas Flowmeters In Ultrasonic Type 5.We Can also Supply Mechanical Gas Flowmeters Features: High Accuracy High Repeatablity Full Stainless Steel Body Including The Turbines For Turbine Gas More..

Prepaid Gas Meter

Prepaid Gas Meter
  • Min. Order (MOQ) 10 Piece(s)
  • Steel 1", 2", 3", 1/2", 1/4", 4", 6"
Prepaid gas meters.

Additional Information:

Payment Terms : T/T

Delivery Time : Kindly Contact Us

View Complete Details
Ask Latest Price & Details
Electronics Gas Flowmeter

Electronics Gas Flowmeter
  • Min. Order (MOQ) 1 Piece(s)
within the working range of the meter the rotor spinsproportional to the actual velocity of gaseous materialflowing. a pick-up coil produces an electrical signal aseach blade crosses through its low magnetic or rffield. this signal is amplified and conditioned by atransmitter or fed directly into a rate/totalizer, and representsthe actual cubic feet per minute (acfm) flowingthrough the meter. the k-factor is stenciled on themeter body in pulses per actual cubic feet (p/acf).because gases are compressible, most people desireto measure the equivalent amount of gas corrected forthe line pressure and temperature to standard cubicfeet per minute (scfm at 60f, 14.69 psia). if theflow temperature and pressure are relatively constant, then a simple correction can be calculated to shift thek-factor from p/acf to p/scf and a simple totalizer(measurement systems india make ) may be used. when flowtemperature and pressure are not constant, a flow computer. specificationslinearity 11.0%/0.5%repeatability 10.25%maximum over-range125% of flow rate for intermittent periodsfrequency output0 to 1, 100 hzvoltage outputapproximately 100 mv@ 100 hz to 1.5 v (rms)@1, 000 hz.pressure drop0.5 psi at 100% of flow rangepressure rating we manufacture flowmeters for most pressures. installationvertical or horizontal (any direction).materials of constructionbody: 316 l stainless steel.flanges: 316 stainless steelrotor: 431 stainless steel.rotor shaft/bearings:standard: tungsten carbide v-cupcartridge frame retainer: 302 stainless steelcartridge frame: 316 l stainless steel.temperature range:meter with bearing structure of:standard: tungsten carbide: -40f to 300f (-40c to 149c).for other temperatures consult factory.

Additional Information:

Payment Terms : L/C, D/A, D/P, T/T, Western Union, ,

Packaging Details : Gas Meter in One Wooden Box With Flow Totaliser.

Delivery Time : Kindly Contact Us

View Complete Details
Ask Latest Price & Details
Wet Gas Meter

Wet Gas Meter
  • Min. Order (MOQ) 1 Piece(s)
  • Steel 1", 2", 3", 1/2", 1/4", 4", 6"
We offer Wet Gas Meter within the working range of the meter the rotor spins proportional to the actual velocity of gaseous material flowing. A pick-up sensor produces an electrical signal as each blade crosses through its low magnetic or rffield. This signal is amplified and conditioned by atransmitter or fed directly into a rate/totalizer, and represents the actual cubic feet per minute (acfm) flowingthrough the meter. The k-factor is stenciled on the meter body in pulses per actual cubic feet (p/acf). Because gases are compressible, most people desireto measure the equivalent amount of gas corrected forthe line pressure and temperature to standard cubicfeet per minute (scfm at 60f, 14.69 psia). If theflow temperature and pressure are relatively constant, then a simple correction can be calculated to shift thek-factor from p/acf to p/scf and a simple totalizer(measurement systems india make ) may be used. When flowtemperature and pressure are not constant, a flow computer. specificationslinearity 11.0%/0.5%repeatability 10.25%maximum over-range125% of flow rate for intermittent periodsfrequency output0 to 1, 100 hzvoltage outputapproximately 100 mv@ 100 hz to 1.5 v (rms)@1, 000 hz. Pressure drop0.5 psi at 100% of flow rangepressure rating we manufacture flowmeters for most pressures. installationvertical or horizontal (any direction). Materials of constructionbody: 316 l stainless steel. Flanges: 316 stainless steelrotor: 431 stainless steel. Rotor shaft/bearings:standard: tungsten carbide v-cupcartridge frame retainer: 302 stainless steelcartridge frame: 316 l stainless steel. Temperature range:meter with bearing structure of:standard: tungsten carbide: -40f to 300f (-40c to 149c). For other temperatures consult factory.

Additional Information:

Payment Terms : T/T

Packaging Details : Gas Meter in One Wooden Box With Flow Totaliser.

Delivery Time : Kindly Contact Us

View Complete Details
Ask Latest Price & Details
Natural Gas Meter

Natural Gas Meter
  • Min. Order (MOQ) 1 Piece(s)
  • Steel 1", 2", 3", 1/2", 1/4", 4", 6"
We have Natural Gas Meter within the working range of the meter the rotor spins proportional to the actual velocity of gaseous materialflowing. A pick-up sensor produces an electrical signal aseach blade crosses through its low magnetic or rf field. This signal is amplified and conditioned by a transmitter or fed directly into a rate/totalizer, and representsthe actual cubic feet per minute (acfm) flowingthrough the meter. The k-factor is stenciled on themeter body in pulses per actual cubic feet (p/acf). Because gases are compressible, most people desireto measure the equivalent amount of gas corrected forthe line pressure and temperature to standard cubicfeet per minute (scfm at 60f, 14.69 psia). If theflow temperature and pressure are relatively constant, then a simple correction can be calculated to shift thek-factor from p/acf to p/scf and a simple totalizer(measurement systems india make ) may be used. When flowtemperature and pressure are not constant, a flow computer. specificationslinearity 11.0%/0.5%repeatability 10.25%maximum over-range125% of flow rate for intermittent periodsfrequency output0 to 1, 100 hzvoltage outputapproximately 100 mv@ 100 hz to 1.5 v (rms)@1, 000 hz. Pressure drop0.5 psi at 100% of flow rangepressure rating we manufacture flowmeters for most pressures. installationvertical or horizontal (any direction). Materials of constructionbody: 316 l stainless steel. Flanges: 316 stainless steelrotor: 431 stainless steel. Rotor shaft/bearings:standard: tungsten carbide v-cupcartridge frame retainer: 302 stainless steelcartridge frame: 316 l stainless steel. Temperature range:meter with bearing structure of:standard: tungsten carbide: -40f to 300f (-40c to 149c). For other temperatures consult factory.

Additional Information:

Payment Terms : T/T

Packaging Details : Gas Meter in One Wooden Box With Flow Totaliser.

Delivery Time : Kindly Contact Us

View Complete Details
Ask Latest Price & Details
Gas Meters

Gas Meters
  • Min. Order (MOQ) 1 Piece(s)
  • Steel 1", 2", 3", 1/2", 1/4", 4", 6"
We are offering Gas Meters, within the working range of the meter the rotor spinsproportional to the actual velocity of gaseous materialflowing. a pick-up coil produces an electrical signal aseach blade crosses through its low magnetic or rffield. this signal is amplified and conditioned by atransmitter or fed directly into a rate/totalizer, and representsthe actual cubic feet per minute (acfm) flowingthrough the meter. the k-factor is stenciled on themeter body in pulses per actual cubic feet (p/acf).because gases are compressible, most people desireto measure the equivalent amount of gas corrected forthe line pressure and temperature to standard cubicfeet per minute (scfm at 60f, 14.69 psia). if theflow temperature and pressure are relatively constant, then a simple correction can be calculated to shift thek-factor from p/acf to p/scf and a simple totalizer(measurement systems india make ) may be used. when flowtemperature and pressure are not constant, a flow computer. specificationslinearity 11.0%/0.5%repeatability 10.25%maximum over-range125% of flow rate for intermittent periodsfrequency output0 to 1, 100 hzvoltage outputapproximately 100 mv@ 100 hz to 1.5 v (rms)@1, 000 hz.pressure drop0.5 psi at 100% of flow rangepressure rating we manufacture flowmeters for most pressures. installationvertical or horizontal (any direction).materials of constructionbody: 316 l stainless steel.flanges: 316 stainless steelrotor: 431 stainless steel.rotor shaft/bearings:standard: tungsten carbide v-cupcartridge frame retainer: 302 stainless steelcartridge frame: 316 l stainless steel.temperature range:meter with bearing structure of:standard: tungsten carbide: -40f to 300f (-40c to 149c).for other temperatures consult factory.

Additional Information:

Payment Terms : T/T

Packaging Details : Gas Meter in One Wooden Box With Flow Totaliser.

Delivery Time : Kindly Contact Us

View Complete Details
Ask Latest Price & Details
Digital Gas Flow Meter

Digital Gas Flow Meter
  • Min. Order (MOQ) 1 Piece(s)
  • Steel 1", 2", 3", 1/2", 1/4", 4", 6"
within the working range of the meter the rotor spinsproportional to the actual velocity of gaseous materialflowing. a pick-up sensor produces an electrical signal aseach blade crosses through its low magnetic or rffield. this signal is amplified and conditioned by atransmitter or fed directly into a rate/totalizer, and representsthe actual cubic feet per minute (acfm) flowingthrough the meter. the k-factor is stenciled on themeter body in pulses per actual cubic feet (p/acf).because gases are compressible, most people desireto measure the equivalent amount of gas corrected forthe line pressure and temperature to standard cubicfeet per minute (scfm at 60f, 14.69 psia). if theflow temperature and pressure are relatively constant, then a simple correction can be calculated to shift thek-factor from p/acf to p/scf and a simple totalizer(measurement systems india make ) may be used. when flowtemperature and pressure are not constant, a flow computer. specificationslinearity 11.0%/0.5%repeatability 10.25%maximum over-range125% of flow rate for intermittent periodsfrequency output0 to 1, 100 hzvoltage outputapproximately 100 mv@ 100 hz to 1.5 v (rms)@1, 000 hz.pressure drop0.5 psi at 100% of flow rangepressure rating we manufacture flowmeters for most pressures. installationvertical or horizontal (any direction).materials of constructionbody: 316 l stainless steel.flanges: 316 stainless steelrotor: 431 stainless steel.rotor shaft/bearings:standard: tungsten carbide v-cupcartridge frame retainer: 302 stainless steelcartridge frame: 316 l stainless steel.temperature range:meter with bearing structure of:standard: tungsten carbide: -40f to 300f (-40c to 149c).for other temperatures consult factory.

Additional Information:

Payment Terms : T/T

Delivery Time : Kindly Contact Us

View Complete Details
Ask Latest Price & Details
Lpg Gas Meter

Lpg Gas Meter
  • Min. Order (MOQ) 1 Piece(s)
  • Steel 1", 2", 3", 1/2", 1/4", 4", 6"
within the working range of the meter the rotor spinsproportional to the actual velocity of gaseous materialflowing. a pick-up sensor produces an electrical signal aseach blade crosses through its low magnetic or rffield. this signal is amplified and conditioned by atransmitter or fed directly into a rate/totalizer, and representsthe actual cubic feet per minute (acfm) flowingthrough the meter. the k-factor is stenciled on themeter body in pulses per actual cubic feet (p/acf).because gases are compressible, most people desireto measure the equivalent amount of gas corrected forthe line pressure and temperature to standard cubicfeet per minute (scfm at 60f, 14.69 psia). if theflow temperature and pressure are relatively constant, then a simple correction can be calculated to shift thek-factor from p/acf to p/scf and a simple totalizer(measurement systems india make ) may be used. when flowtemperature and pressure are not constant, a flow computer. specificationslinearity 11.0%/0.5%repeatability 10.25%maximum over-range125% of flow rate for intermittent periodsfrequency output0 to 1, 100 hzvoltage outputapproximately 100 mv@ 100 hz to 1.5 v (rms)@1, 000 hz.pressure drop0.5 psi at 100% of flow rangepressure rating we manufacture flowmeters for most pressures. installationvertical or horizontal (any direction).materials of constructionbody: 316 l stainless steel.flanges: 316 stainless steelrotor: 431 stainless steel.rotor shaft/bearings:standard: tungsten carbide v-cupcartridge frame retainer: 302 stainless steelcartridge frame: 316 l stainless steel.temperature range:meter with bearing structure of:standard: tungsten carbide: -40f to 300f (-40c to 149c).for other temperatures consult factory.

Additional Information:

Payment Terms : T/T

Packaging Details : Gas Meter in One Wooden Box With Flow Totaliser.

Delivery Time : Kindly Contact Us

View Complete Details
Ask Latest Price & Details
Gas Meter

Gas Meter
  • Min. Order (MOQ) 1 Piece(s)
  • Steel 1", 2", 3", 1/2", 1/4", 4", 6"
We can supply Gas Meter within the working range of the meter the rotor spins proportional to the actual velocity of gaseous material flowing. A pick-up sensor produces an electrical signal as each blade crosses through its low magnetic or rffield. This signal is amplified and conditioned by a transmitter or fed directly into a rate/totalizer, and represents the actual cubic feet per minute (acfm) flowingthrough the meter. The k-factor is stenciled on the meter body in pulses per actual cubic feet (p/acf). Because gases are compressible, most people desireto measure the equivalent amount of gas corrected forthe line pressure and temperature to standard cubicfeet per minute (scfm at 60f, 14.69 psia). If theflow temperature and pressure are relatively constant, then a simple correction can be calculated to shift thek-factor from p/acf to p/scf and a simple totalizer(measurement systems india make ) may be used. When flowtemperature and pressure are not constant, a flow computer. specificationslinearity 11.0%/0.5%repeatability 10.25%maximum over-range125% of flow rate for intermittent periodsfrequency output0 to 1, 100 hzvoltage outputapproximately 100 mv@ 100 hz to 1.5 v (rms)@1, 000 hz. Pressure drop0.5 psi at 100% of flow rangepressure rating we manufacture flowmeters for most pressures. installationvertical or horizontal (any direction). Materials of constructionbody: 316 l stainless steel. Flanges: 316 stainless steelrotor: 431 stainless steel. Rotor shaft/bearings:standard: tungsten carbide v-cupcartridge frame retainer: 302 stainless steelcartridge frame: 316 l stainless steel. Temperature range:meter with bearing structure of:standard: tungsten carbide: -40f to 300f (-40c to 149c). For other temperatures consult factory.

Additional Information:

Payment Terms : T/T

Packaging Details : Gas Meter in One Wooden Box With Flow Totaliser.

Delivery Time : Kindly Contact Us

View Complete Details
Ask Latest Price & Details
Diaphragm Gas Meter

Diaphragm Gas Meter
  • Min. Order (MOQ) 1 Piece(s)
  • Steel 1", 2", 3", 1/2", 1/4", 4", 6"
We have Diaphragm Gas Meter within the working range of the meter the rotor spins proportional to the actual velocity of gaseous materialflowing. A pick-up sensor produces an electrical signal aseach blade crosses through its low magnetic or rf field. This signal is amplified and conditioned by a transmitter or fed directly into a rate/totalizer, and representsthe actual cubic feet per minute (acfm) flowingthrough the meter. The k-factor is stenciled on themeter body in pulses per actual cubic feet (p/acf). Because gases are compressible, most people desireto measure the equivalent amount of gas corrected forthe line pressure and temperature to standard cubicfeet per minute (scfm at 60f, 14.69 psia). If theflow temperature and pressure are relatively constant, then a simple correction can be calculated to shift thek-factor from p/acf to p/scf and a simple totalizer(measurement systems india make ) may be used. When flowtemperature and pressure are not constant, a flow computer. specificationslinearity 11.0%/0.5%repeatability 10.25%maximum over-range125% of flow rate for intermittent periodsfrequency output0 to 1, 100 hzvoltage outputapproximately 100 mv@ 100 hz to 1.5 v (rms)@1, 000 hz. Pressure drop0.5 psi at 100% of flow rangepressure rating we manufacture flowmeters for most pressures. installationvertical or horizontal (any direction). Materials of constructionbody: 316 l stainless steel. Flanges: 316 stainless steelrotor: 431 stainless steel. Rotor shaft/bearings:standard: tungsten carbide v-cupcartridge frame retainer: 302 stainless steelcartridge frame: 316 l stainless steel. Temperature range:meter with bearing structure of:standard: tungsten carbide: -40f to 300f (-40c to 149c). For other temperatures consult factory.

Additional Information:

Payment Terms : T/T

Packaging Details : Gas Meter in One Wooden Box With Flow Totaliser.

Delivery Time : Kindly Contact Us

View Complete Details
Ask Latest Price & Details
Gas Flow Meters

Gas Flow Meters
  • Min. Order (MOQ) 1 Piece(s)
  • Steel 1", 2", 3", 1/2", 1/4", 4", 6"
We have Gas Flow Meters within the working range of the meter the rotor spins proportional to the actual velocity of gaseous material flowing. A pick-up coil produces an electrical signal as each blade crosses through its low magnetic or rffield. This signal is amplified and conditioned by a transmitter or fed directly into a rate/totalizer, and represents the actual cubic feet per minute (acfm) flowingthrough the meter. The k-factor is stenciled on the meter body in pulses per actual cubic feet (p/acf). Because gases are compressible, most people desireto measure the equivalent amount of gas corrected forthe line pressure and temperature to standard cubicfeet per minute (scfm at 60f, 14.69 psia). If the flow temperature and pressure are relatively constant, then a simple correction can be calculated to shift thek-factor from p/acf to p/scf and a simple totalizer(measurement systems india make ) may be used. When flowtemperature and pressure are not constant, a flow computer. specificationslinearity 11.0%/0.5%repeatability 10.25%maximum over-range125% of flow rate for intermittent periodsfrequency output0 to 1, 100 hzvoltage outputapproximately 100 mv@ 100 hz to 1.5 v (rms)@1, 000 hz. Pressure drop0.5 psi at 100% of flow rangepressure rating we manufacture flowmeters for most pressures. installationvertical or horizontal (any direction). Materials of constructionbody: 316 l stainless steel. Flanges: 316 stainless steelrotor: 431 stainless steel. Rotor shaft/bearings:standard: tungsten carbide v-cupcartridge frame retainer: 302 stainless steelcartridge frame: 316 l stainless steel. Temperature range:meter with bearing structure of:standard: tungsten carbide: -40f to 300f (-40c to 149c). For other temperatures consult factory.

Additional Information:

Payment Terms : T/T

Packaging Details : Gas Meter in One Wooden Box With Flow Totaliser.

Delivery Time : Kindly Contact Us

View Complete Details
Ask Latest Price & Details
Gas Flow Meter

Gas Flow Meter
  • Min. Order (MOQ) 1 Piece(s)
  • Steel 1", 2", 3", 1/2", 1/4", 4", 6"
We offer Gas Flow Meter, within the working range of the meter the rotor spinsproportional to the actual velocity of gaseous materialflowing. a pick-up coil produces an electrical signal aseach blade crosses through its low magnetic or rffield. this signal is amplified and conditioned by atransmitter or fed directly into a rate/totalizer, and representsthe actual cubic feet per minute (acfm) flowingthrough the meter. the k-factor is stenciled on themeter body in pulses per actual cubic feet (p/acf).because gases are compressible, most people desireto measure the equivalent amount of gas corrected forthe line pressure and temperature to standard cubicfeet per minute (scfm at 60f, 14.69 psia). if theflow temperature and pressure are relatively constant, then a simple correction can be calculated to shift thek-factor from p/acf to p/scf and a simple totalizer(measurement systems india make ) may be used. when flowtemperature and pressure are not constant, a flow computer. specificationslinearity 11.0%/0.5%repeatability 10.25%maximum over-range125% of flow rate for intermittent periodsfrequency output0 to 1, 100 hzvoltage outputapproximately 100 mv@ 100 hz to 1.5 v (rms)@1, 000 hz.pressure drop0.5 psi at 100% of flow rangepressure rating we manufacture flowmeters for most pressures. installationvertical or horizontal (any direction).materials of constructionbody: 316 l stainless steel.flanges: 316 stainless steelrotor: 431 stainless steel.rotor shaft/bearings:standard: tungsten carbide v-cupcartridge frame retainer: 302 stainless steelcartridge frame: 316 l stainless steel.temperature range:meter with bearing structure of:standard: tungsten carbide: -40f to 300f (-40c to 149c).for other temperatures consult factory.

Additional Information:

Payment Terms : T/T

Packaging Details : Gas Meter in One Wooden Box With Flow Totaliser.

Delivery Time : Kindly Contact Us

View Complete Details
Ask Latest Price & Details
Tell Us What are you looking for? Will call you back

Contact Us

View Contact No.