Our Product / Services
The 100X Automated Filter Tester is designed for test and quality control validation of filter media, replaceable particulate filters, and masks used in medical and industrial hygiene applications. The 100X meets leading global industry standards such as NIOSH 42 CFR Part 84, GB 2626, EN 13274-7:2019, and ASTM F3502-21. The 100X is a high capacity automated solution ideally suited to meet the precise and rigorous requirements of both development and production quality control environments. The 100X is perfect for testing N95, KN95, FFP, and P100 respirator masks.
Applications
Key Features & Benefits
Specification
Performance & Product Specifications | |||
---|---|---|---|
Unit | 100Xp (Oil) | 100Xp (Paraffin) | 100Xs (Salt) |
Standards | NIOSH 42 CFR Part 84 or Equivalent | EN 13274-7:2019 EN 12941/EN 12942 |
NIOSH 42 CFR Part 84 or Equivalent |
Reagents | DOP, PAO-4 | Paraffin Oil CAS# 8012-95-1 |
NaCl |
Available Configurations | Manual, Hybrid and Automatic | ||
Aerosol Generation | |||
Particle Size | |||
Count Median Diameter (CMD) | 0.185 μm ± 0.02 | 0.29 – 0.45 μm | 0.075 μm ± 0.02 |
Geometric Standard Deviation (GSD) | ≤ 1.6 | 1.6 – 2.2 | ≤ 1.86 |
Typical Concentration (mg/m3) | 80 – 120 40 – 60 (High Flow) |
15 – 25 15 – 25 (High Flow) |
15 – 25 |
Flow Rate Options | 10 – 120 lpm (0.18 – 4.2 SCFM) | ||
10 – 40 lpm (0.18 – 1.4 SCFM) | |||
10 – 170 lpm (0.18 – 6.0 SCFM) | |||
Aerosol Flow Accuracy | Accurate to ± 0.4% of reading, plus ± 0.2% full scale | ||
Aerosol Detection | |||
Dynamic Range | 0.1 μg/m³ to >200 mg/m³, accurate to ± 1% of reading | ||
Penetration | 0.0005% | ||
Efficiency | 0.999995 | ||
Pressure Management | |||
Pressure Range Options | 0-25 mm H²O/0-245Pa; 1:1 TUR | ||
0-50 mm H²O/0-490Pa; 2:1 TUR | |||
0-100 mm H²O/0-981Pa; >4:1 TUR | |||
0-250 mm H²O/0-2452Pa; >4:1 TUR | |||
Accuracy | ±0.25% of full scale | ||
Test Fixture | |||
Standard | Standard Size: ID 11.4 cm (4.5 in.); Allows for flat sheet media testing requiring face velocity of 5.33 cm/s at a flow rate of 32 lpm |
||
Stroke Height: 14.6 cm (5.75 in.) | |||
Custom | On Unit: Please inquire | ||
Off Unit: No size limit | |||
Communication Ports | |||
Automatic, Hybrid Models | USB; RS232; Data Connection; PLC-Controls | ||
Utilities | |||
Power | 110 VAC , 5.5A; or 220 VAC, 2.5A (50/60 Hz) | ||
Compressed Air (Regulator Recommended) |
396 lpm at 6.2 bar ± 0.35 bar (620 KPa ± 35 KPa) or 14 SCFM at 90 psig ± 5.0 psig |
||
Air Supply Line ID | Minimum 9.5 mm (0.375 in.) | ||
Dimensions (L x W x H) | |||
100X Main Unit | 71 cm x 69 cm x 89 cm (28 in. x 27 in. x 35 in.) | ||
Optional Base | 71 cm x 69 cm x 76 cm (27 in. x 28 in. x 30 in.) | ||
Optional Exhaust | 42.5 cm x 62.8 cm x 40.6 cm (16.75 in. x 24.75 in. x 16 in.) | ||
Optional Mask Test Adapter | 20 cm x 20 cm x 14 cm (8 in. x 8 in. x 5.5 in.) | ||
Weight | |||
100X Main Unit | 75 kg (165 lb) | ||
Optional Base | 38.6 kg (85 lb) | ||
Optional Local Exhaust | 20 kg (44 lb) | ||
Optional Mask Test Adapter | 1.6 kg (3.5 lb) | ||
Compliance | |||
CE, RoHS, FCC, CSA |
Download
MeasureTest Provide calibration services for all types of Particle Counters and Aerosol Photometer. We use certified and genuine calibration laboratory equipment. The traceabilities are NABL certified.
Providing services for such advanced instruments, ESD safe laboratories are essential. We have adopted certain norms and practices in order to make our particle counter calibration laboratories static free so that precision electronic equipment can be handled safely. Our engineers uses ESD safe wrist straps, ESD safe shoes or heel straps, ESD safe lab coats and gloves while working with any electronic boards.
MeasureTest maintains a proper document management system to keep all historical records of the customer and instruments.
The calibration we perform is NIST traceable.
Our calibration services include:
Features
The outstanding oil vapour sensor S 120 monitor to content of compress air and gas always or for spots instructions when used as portable units in combination. The simplest installation process and the outstanding performance make S 120 the excellent when residual oil content requirements to be measure and monitor.
Oil free air compressed has not an easily assignment to be completed. Our monitoring systems are used many more company and requests to avoids pollutions in product and risk for health of human. The S 120 sensor monitoring tasks are affordable and reliable.
With the S 505 SUTO have fixed to auto generating measuring systems with standards designed. According to ISO the dev point meter allows required interface with highest experienced in this feild. With the assured safety features with measuring to combined and latest dew point sensor providers. Our sensors working long lasting with out errors.
Features
A compressed testing meters S 401 has needed in nearly some compressed air systems. It supports your monitoring systems supports you to optimize your systems and gas management equipments. Pressure Temperature Sensors the compact monitor your compressed air pressure solution with 4 . 20 mA output. Current CLamp Sensor Rogowski Coil for wide range at high accuracy.
Air flowing meters has prepaired to be easily to use for gas management measurements equipments manufacturers with reasonable price, we are offering a many other compressed ait testing products. It’s easily made and chooses the correct flow meter for your suggestions, fit for your requirements. The models are meters, created on its measurements principle it’s not compulsory to reward the air compressed testing equipments, needs any additional measurements installation and measuring the flowing consumptions.
As per flowing meters are also suitable for used to gas measurement like nitrogen or several other gases. This S 401 sensors equipment provides you with extraordinary resolutions and sampler rates give exact result and accurate measurements. Our flow meters are capable calibrations curve, owing to these the sensors gas measurements without any damages of precision.
We are provided optional colour display has designed to appearance entirely measurement standards that real flow and totally consumptions. At a time we could succeed the sensor setting likes measurement equipments type available.
Our company manufacturing two different types of flow meter output signals. It can’t stand prepared with an insulated analogue and positive output signal compressor air testing and the totally compressed air consumptions. Otherwise an edge contact all measurement standards through the digitally interface.
Feature
Features
ISO 8537 compliants pure quantification of compress air system is bound installing and long lasting features. We think for a revolutions: The S 600 is unlike its competitions. It's combine superior sensor technology, software measuring and a time saving setup into a handy, touchscreen controlled with multiple tools.
The S 130 has a latest laser particle counters improved for presentations in compress air or compressed gas. In view of value and experiments of client requirements this instruments have designed for persistent every minute of every day task. Conditional upon the picked model there are affectability accessible from 0.1 - 5.0 m. This S 130 can satisfy the necessities stipulation in the compacted air standards ISO 8573-4. The measure test esteems speak to the laser particle checks per ft³, l or m³ or on the other hand in g/m³. Settings should be possible through the incorporated presentation, an outer show or through the administration programming.
Features
ISO 8537 complaints clarity quantification of compressed air technique are certain to time consuming installation and long lasting testing analyser. We think it's time to revolutions: The S 600 is disparate its competitions. It combined modern sensors technologies, software shown measurement and a time saving into a touchscreen control and multiple tools inbuilt. Air techniques international compressed air purity analyzer S551 display and data logger in Mumbai India
Features
The measuretest dew point sensor S 220 offers reliable and long lasting constant dew point monitoring for industrial application. Measuretest has used a latest sensors technology and materials, it has higher signals at very low moisture level thus in case reliable measurement down to –100 °C.
With stainless steel wire filters with opening size to below 30 um protected the sensors from particle. It has designed for application to very low moisture level and requirements to be detect. The measured dew points are output through a 4 to 20 mA signals (3-wire or loops power). Dew point sensor to parameter such as analogue outputs scaling, physical unit can be easily changed by using measuretest service kits.
Features
The ideal data logger for energy analysis and air audits (ISO 11011).
It comes with a high resolution 5” color touch screen interface, making the operation as simple as possible. SUTO intelligent sensors are detected automatically on power-up. With a few settings the data logger is ready for operations with virtually unlimited memory size.
Features
The MiniColt 4SP has been designed for air flow testing, visualization tests, and particle recovery work. It is a completely portable unit and has the ability to produce anything from a small wisp of artificial smoke to a large plume, on and off the power. Pharmaceutical grade smoke chemical, stored in a one-piece aluminum canister is forced under pressure through the precision machined heat exchanger, where it is vaporized. We are manufacturers, suppliers and exporters of non toxic smoke generator machine for clean room in Mumbai India to worldwide company.
The Air Trace is available in two models, the standard Air Trace comes in an enameled orange finish & Air Trace S is in stainless steel. The new design is lighter, more practical and modern. It also incorporates a new double aspect sight glass.
The Air Trace S variant has been developed in stainless steel to cater for cleanrooms & controlled environments.
Supplied in its own robust carry case with 500ml of smoke chemical (250 minutes worth of smoke!), a battery and a battery charger, its an ideal tool for those looking to highlight airflow, LEV (Local Exhaust Ventilation) issues that smoke is uniquely capable of revealing.
Features
The Activecount100 Series
Lighthouse generation 100 active counts with touchscreen interface of microbial air sampler download data with USB, gas sample options and finest design.
Included
Technical Specifications
Specs | ActiveCount100 | ActiveCount100H |
---|---|---|
Flow Rate | 100 litters/minutes ± 5% | |
Impactor head | 316L Stainless Steels 300 hole, 18 meter/seconds, auto-cleavable | |
Dust cover | 316L Stainless Steels, auto-cleavable | |
Removable baseplate | Attractively attach remove, auto- cleavable | |
Adjustable baseplate | Friendly using standards 91 mm petri disc (86mm-93mm), include modification tools | |
Sampler volumes presets | 8 programmable volume pre-set | |
Username | 60 programming username (15 character) | |
Location name | 400 programming locations (15 character) | |
Display | 3.5 inches (8.9 cm) touch screen | |
LED lights | RGB LED lights for status, alert, and alarm | |
Speaker | Speaker volumes | |
Time/Date arrangements | Time arrangement 12 or 24 hours, Date format YYYY/MM/DD, MM/DD/YYYY, DD/MM/YYYY | |
USB ports | USB 2.0 ports (8 GB flash drives) | |
Data record | Unlimited; save on USB drive in .csv file formats | |
Log file data fields | Date, times, locations, users, duration, volumes, status | |
Active flow controls | - | Active control air flowing at 100 liters/minutes |
Handle – tripod mountable | - | Tripod mountable handles 3/8-16, include 1/4-20 thread adapters |
HEPA filter exhausted | - | HEPA filter exhausted capture 99.98% of particle as smallest 0.2 µm |
Powers | 24 VDC powers adapters (100-240V ~ 1.5A 50-60Hz) | |
Battery | AC/battery 8 hrs normal used | Internal battery 10 hours normal used |
Weight | 5.80 lbs (2.64 kg) | |
Calibration | Annual | |
Operating environments | 0-90% humidity non condensing, 0-40 °C sampling, 0-35 °C chargings | |
Dimension | 7.6”(h) x 4.7“(w) x 4.7”(d) [ 19.4 (h) x 12.0 (w) x 12.0 (d) cm] | |
Carry case | Pelican case with Lighthouse logo |
Download 01
Download 02
Mini Colt 4S Portable Smoke Generator use a pressurized aerosol canister in aluminum containing smoke fluid and gaseous inertial propellant necessary for smoke generation.
The fluid used to produce the water-based white smoke is a combination of purified water and pharmaceutical grade glycerine (CAS 56-81-5 / EINECS 200-289- 5).
Watch Video Demonstration of Minicolt – 4 with Colt 4 Aerosol
The resulting smoke from the Colt 4 smoke canister is very persistent. The canister is a one-piece aluminium vessel, eliminating any chances of rust occurring on the seam and prolonging the life of the aerosol.
The use of aerosol canisters reduces the number of moving elements within the device to only one, with a consequent ease of maintenance and reliability.
Micro Meter Filter
Used when sampling pressurized air and gasses and sample is required to be captured and not allowed back into the atmosphere.
We are offering the latest quality and international standards of ATI oil used for aggregation and aerosol generator. Our chemicals have used for leakage and construction controls equipments checking of effective air filter. Pao oil ATI metals product is proper for governments and testing application.
We provide filter testing applications to PAO-4 (poly-alpha olefin).
We are manufacturing 2 and 5 litre containers and many more as per the customer’s requirements and suggestions.
Latest option for usage & safe operating of automation & control system in Hazardous and Hostile Atmosphere as per IEC 60079-2 & NFPA 496
Operating Principle
Fluids flow from high pressure to low pressure hence, maintain positive pressure inside the enclosure which restricts or prevents the entry of outside gases / fluids inside the pane
Carities Offered
Type Of Purging
With MOC
Technical Details:
Humidity&CO2 Anemometer 89161/ 189171/89191