SMC offers a variety of auto switches for actuators and air grippers. Reed and solid state switches are available in a general purpose type or with 2-color indication, which allows the optimum operating position to be determined by the color of the light. Solid state switches are also available in 2-color indication with diagnostic output, water resistant 2-color indication, built-in OFF-delay timer (200 ms), magnetic field resistant, heat resistant and wide range detection configurations. Various lead wire lengths are available.

With sincerity and hard work of our professionals, we have established a strong foothold in the industry by offering Bradma Diehard Hand Punches. Our professionals make use of only premium quality raw material, sourced from the most trusted vendors and keep in mind the industry defined quality standards while manufacturing these hand punches.

SMC's airline equipment provides unsurpassed sensing, regulation and filtration performance for your pneumatic system. With our large range of pneumatic preparation products, we can provide the clean dry air necessary to achieve the peak performance required by your fluid power system. Our connectors simplify the plumbing of all your components. SMC's innovative one-touch and uni-thread one touch fitting technology provides dramatic time savings during the installation of both air fittings and pneumatic flow controls. We offer many variations and sizes to suit any application. Tubing is made in several sizes and packaged in a variety of lengths.

The SMC connector line includes inch and metric one touch fittings, fitting manifolds, and pneumatic tubing available in multiple colors, sizes, and materials: Comprehensive line of inch or metric sized fittings, speed controllers, and tubing Includes clean room options and a broad set of specialized fitting and pneumatic tubing options Integrates one-touch fitting technology in both pneumatic fittings and speed controls Provides stainless steel fitting and brass fitting options Improves energy consumption, by providing lower pressure return stroke options Air cylinder speed control is critical to the longevity of your machine operation

Spotcheck SKC-I is a solvent cleaner used in the liquid penetrant inspection process. SKC-I may be used on a moist cloth to remove surface penetrant from the inspection area prior to applying developer.

With sincerity and hard work of our professionals, we have established a strong foothold in the industry by offering Bradma Diehard Hand Punches. Our professionals make use of only premium quality raw material, sourced from the most trusted vendors and keep in mind the industry defined quality standards while manufacturing these hand punches.

SMC's airline equipment provides unsurpassed sensing, regulation and filtration performance for your pneumatic system. With our large range of pneumatic preparation products, we can provide the clean dry air necessary to achieve the peak performance required by your fluid power system. Our connectors simplify the plumbing of all your components. SMC's innovative one-touch and uni-thread one touch fitting technology provides dramatic time savings during the installation of both air fittings and pneumatic flow controls. We offer many variations and sizes to suit any application. Tubing is made in several sizes and packaged in a variety of lengths.

ange of static detectors with integral fittingsEasily fitted to the cylinder groove on C55, MY1 series, etc.Reduced load currentExtra-flexible wireFor relays, printed circuits, programmable controllers

ZL-2Cs formulation has been designed to be impervious to water to protect it from over washing and permit more penetrant to remain in discontinuities for improved detection of small defects. It and other post emulsifiable penetrants require the application of a lipophilic or hydrophilic emulsifier to render them washable with water.

ZL-2Cs formulation has been designed to be impervious to water to protect it from over washing and permit more penetrant to remain in discontinuities for improved detection of small defects. It and other post emulsifiable penetrants require the application of a lipophilic or hydrophilic emulsifier to render them washable with water.

ZL-67 fluoresces a bright greenish-yellow under ultraviolet radiation and is safe for use on most engineering and aerospace alloys including aluminum, steel, nickel and titanium. Use of an ultraviolet light source with a peak wavelength of 365 nanometers, such as the Magnaflux ZB-100F fan-cooled black light, is recommended.

Zyglo ZL-60D fluoresces a bright greenish-yellow under ultraviolet radiation and is safe for use on most engineering and aerospace alloys including aluminum, steel, nickel and titanium. Use of an ultraviolet light source with a peak wavelength of 365 nanometers, such as the Magnaflux ZB-100F fan-cooled UV light, is recommended.

Magnaglo 14A Redi-BathTM is a prepared liquid concentrate of 14A Fluorescent Powder, wetting agents, anti-foaming agents and long lasting rust inhibitors.ASTM E 1444, ASTM E-709, NAVSEA 250-1500-1, MIL-STD-271, MIL-STD-2132, ASME B & PV Code, Sec. V

Magnavis 9C Red Visible Wet Method Dry Powder Concentrate used on surface where red contrasts more than black for optimum color contrast. Magnavis 9C is composed of compounded magnetic powder.

ASTM E 1444, ASTM E-709 (E-138), NAVSEA 250-1500-1, MIL-STD-271, MIL-STD-2132, ASME B & PV Code, Sec. VMagnaglo 20B is a dry mix formula of 14A Fluorescent Powder and WA-2B water conditioner containing wetting agents and corrosion inhibitors designed to be added to a water bath.

ZL-15B water washable penetrant is a low-sensitivity penetrant that features excellent washability. It is used to find open surface flaws such as cracks and porosity in seams, laps, cold shuts, and laminations on castings, forgings, extrusions, and parts with rough surfaces. It can be developed with ZP-4B dry powder developer, with ZP-5B water suspendible developer in an agitated tank or with ZP-9F non-aqueous developer. With a UV-A light source, like the EV6000, indications will appear as a bright green-yellow fluorescence.

SMC offers a variety of auto switches for actuators and air grippers. Reed and solid state switches are available in a general purpose type or with 2-color indication, which allows the optimum operating position to be determined by the color of the light. Solid state switches are also available in 2-color indication with diagnostic output, water resistant 2-color indication, built-in OFF-delay timer (200 ms), magnetic field resistant, heat resistant and wide range detection configurations. Various lead wire lengths are available.

With sincerity and hard work of our professionals, we have established a strong foothold in the industry by offering Bradma Diehard Hand Punches. Our professionals make use of only premium quality raw material, sourced from the most trusted vendors and keep in mind the industry defined quality standards while manufacturing these hand punches.

SMC's airline equipment provides unsurpassed sensing, regulation and filtration performance for your pneumatic system. With our large range of pneumatic preparation products, we can provide the clean dry air necessary to achieve the peak performance required by your fluid power system. Our connectors simplify the plumbing of all your components. SMC's innovative one-touch and uni-thread one touch fitting technology provides dramatic time savings during the installation of both air fittings and pneumatic flow controls. We offer many variations and sizes to suit any application. Tubing is made in several sizes and packaged in a variety of lengths.

The SMC connector line includes inch and metric one touch fittings, fitting manifolds, and pneumatic tubing available in multiple colors, sizes, and materials: Comprehensive line of inch or metric sized fittings, speed controllers, and tubing Includes clean room options and a broad set of specialized fitting and pneumatic tubing options Integrates one-touch fitting technology in both pneumatic fittings and speed controls Provides stainless steel fitting and brass fitting options Improves energy consumption, by providing lower pressure return stroke options Air cylinder speed control is critical to the longevity of your machine operation

Spotcheck SKC-I is a solvent cleaner used in the liquid penetrant inspection process. SKC-I may be used on a moist cloth to remove surface penetrant from the inspection area prior to applying developer.

With sincerity and hard work of our professionals, we have established a strong foothold in the industry by offering Bradma Diehard Hand Punches. Our professionals make use of only premium quality raw material, sourced from the most trusted vendors and keep in mind the industry defined quality standards while manufacturing these hand punches.

SMC has redesigned the CQ2 compact cylinder with a new body, making it possible to mount auto switches on any of the 4 surfaces, depending on the installation conditions. Auto switch mounting grooves have replaced the CQ2s mounting rails, preventing projection of auto switches and improving ease and safety of work.

SMC's airline equipment provides unsurpassed sensing, regulation and filtration performance for your pneumatic system. With our large range of pneumatic preparation products, we can provide the clean dry air necessary to achieve the peak performance required by your fluid power system. Our connectors simplify the plumbing of all your components. SMC's innovative one-touch and uni-thread one touch fitting technology provides dramatic time savings during the installation of both air fittings and pneumatic flow controls. We offer many variations and sizes to suit any application. Tubing is made in several sizes and packaged in a variety of lengths.

ange of static detectors with integral fittingsEasily fitted to the cylinder groove on C55, MY1 series, etc.Reduced load currentExtra-flexible wireFor relays, printed circuits, programmable controllers

ZL-2Cs formulation has been designed to be impervious to water to protect it from over washing and permit more penetrant to remain in discontinuities for improved detection of small defects. It and other post emulsifiable penetrants require the application of a lipophilic or hydrophilic emulsifier to render them washable with water.

ZL-2Cs formulation has been designed to be impervious to water to protect it from over washing and permit more penetrant to remain in discontinuities for improved detection of small defects. It and other post emulsifiable penetrants require the application of a lipophilic or hydrophilic emulsifier to render them washable with water.

ZL-67 fluoresces a bright greenish-yellow under ultraviolet radiation and is safe for use on most engineering and aerospace alloys including aluminum, steel, nickel and titanium. Use of an ultraviolet light source with a peak wavelength of 365 nanometers, such as the Magnaflux ZB-100F fan-cooled black light, is recommended.

Zyglo ZL-60D fluoresces a bright greenish-yellow under ultraviolet radiation and is safe for use on most engineering and aerospace alloys including aluminum, steel, nickel and titanium. Use of an ultraviolet light source with a peak wavelength of 365 nanometers, such as the Magnaflux ZB-100F fan-cooled UV light, is recommended.

Magnaglo 14A Redi-BathTM is a prepared liquid concentrate of 14A Fluorescent Powder, wetting agents, anti-foaming agents and long lasting rust inhibitors.ASTM E 1444, ASTM E-709, NAVSEA 250-1500-1, MIL-STD-271, MIL-STD-2132, ASME B & PV Code, Sec. V

Magnavis 9C Red Visible Wet Method Dry Powder Concentrate used on surface where red contrasts more than black for optimum color contrast. Magnavis 9C is composed of compounded magnetic powder.

ASTM E 1444, ASTM E-709 (E-138), NAVSEA 250-1500-1, MIL-STD-271, MIL-STD-2132, ASME B & PV Code, Sec. VMagnaglo 20B is a dry mix formula of 14A Fluorescent Powder and WA-2B water conditioner containing wetting agents and corrosion inhibitors designed to be added to a water bath.

ZL-15B water washable penetrant is a low-sensitivity penetrant that features excellent washability. It is used to find open surface flaws such as cracks and porosity in seams, laps, cold shuts, and laminations on castings, forgings, extrusions, and parts with rough surfaces. It can be developed with ZP-4B dry powder developer, with ZP-5B water suspendible developer in an agitated tank or with ZP-9F non-aqueous developer. With a UV-A light source, like the EV6000, indications will appear as a bright green-yellow fluorescence.